blob: c88b9fc8c0efff84a9d7d15c2d689940c86cc8d0 [file] [log] [blame]
Tom Rini83d290c2018-05-06 17:58:06 -04001// SPDX-License-Identifier: GPL-2.0+
Heiko Schochere379c032014-07-18 06:07:22 +02002/*
3 * (C) Copyright 2014
4 * Heiko Schocher, DENX Software Engineering, hs@denx.de.
5 *
6 * Based on:
7 * Copyright (C) 2012 Freescale Semiconductor, Inc.
8 *
9 * Author: Fabio Estevam <fabio.estevam@freescale.com>
Heiko Schochere379c032014-07-18 06:07:22 +020010 */
11
12#include <asm/arch/clock.h>
13#include <asm/arch/imx-regs.h>
14#include <asm/arch/iomux.h>
15#include <asm/arch/mx6-pins.h>
Masahiro Yamada1221ce42016-09-21 11:28:55 +090016#include <linux/errno.h>
Heiko Schochere379c032014-07-18 06:07:22 +020017#include <asm/gpio.h>
Stefano Babic552a8482017-06-29 10:16:06 +020018#include <asm/mach-imx/iomux-v3.h>
19#include <asm/mach-imx/boot_mode.h>
20#include <asm/mach-imx/mxc_i2c.h>
21#include <asm/mach-imx/video.h>
Heiko Schochere379c032014-07-18 06:07:22 +020022#include <mmc.h>
23#include <fsl_esdhc.h>
24#include <miiphy.h>
25#include <netdev.h>
26#include <asm/arch/mxc_hdmi.h>
27#include <asm/arch/crm_regs.h>
28#include <linux/fb.h>
29#include <ipu_pixfmt.h>
Diego Dorta7594c512017-09-22 12:12:18 -030030#include <input.h>
Heiko Schochere379c032014-07-18 06:07:22 +020031#include <asm/io.h>
32#include <asm/arch/sys_proto.h>
33#include <pwm.h>
34
35DECLARE_GLOBAL_DATA_PTR;
36
37#define UART_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
38 PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \
39 PAD_CTL_SRE_FAST | PAD_CTL_HYS)
40
41#define USDHC_PAD_CTRL (PAD_CTL_PUS_47K_UP | \
42 PAD_CTL_SPEED_LOW | PAD_CTL_DSE_80ohm | \
43 PAD_CTL_SRE_FAST | PAD_CTL_HYS)
44
45#define ENET_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
46 PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
47
48#define SPI_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_SPEED_MED | \
49 PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST)
50
51#define I2C_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
52 PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \
53 PAD_CTL_ODE | PAD_CTL_SRE_FAST)
54
55#define PC MUX_PAD_CTRL(I2C_PAD_CTRL)
56
57#define DISP_PAD_CTRL (0x10)
58
59#define ECSPI4_CS1 IMX_GPIO_NR(5, 2)
60
Heiko Schocher7254d922015-05-18 13:32:31 +020061#if (CONFIG_SYS_BOARD_VERSION == 1)
62#include "./aristainetos-v1.c"
Heiko Schocher96270842015-08-24 11:36:40 +020063#elif ((CONFIG_SYS_BOARD_VERSION == 2) || (CONFIG_SYS_BOARD_VERSION == 3))
Heiko Schocher7254d922015-05-18 13:32:31 +020064#include "./aristainetos-v2.c"
65#endif
66
67
Heiko Schochere379c032014-07-18 06:07:22 +020068struct i2c_pads_info i2c_pad_info1 = {
69 .scl = {
70 .i2c_mode = MX6_PAD_CSI0_DAT9__I2C1_SCL | PC,
71 .gpio_mode = MX6_PAD_CSI0_DAT9__GPIO5_IO27 | PC,
72 .gp = IMX_GPIO_NR(5, 27)
73 },
74 .sda = {
75 .i2c_mode = MX6_PAD_CSI0_DAT8__I2C1_SDA | PC,
76 .gpio_mode = MX6_PAD_CSI0_DAT8__GPIO5_IO26 | PC,
77 .gp = IMX_GPIO_NR(5, 26)
78 }
79};
80
81struct i2c_pads_info i2c_pad_info2 = {
82 .scl = {
83 .i2c_mode = MX6_PAD_KEY_COL3__I2C2_SCL | PC,
84 .gpio_mode = MX6_PAD_KEY_COL3__GPIO4_IO12 | PC,
85 .gp = IMX_GPIO_NR(4, 12)
86 },
87 .sda = {
88 .i2c_mode = MX6_PAD_KEY_ROW3__I2C2_SDA | PC,
89 .gpio_mode = MX6_PAD_KEY_ROW3__GPIO4_IO13 | PC,
90 .gp = IMX_GPIO_NR(4, 13)
91 }
92};
93
Heiko Schochere379c032014-07-18 06:07:22 +020094iomux_v3_cfg_t const usdhc1_pads[] = {
95 MX6_PAD_SD1_CLK__SD1_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
96 MX6_PAD_SD1_CMD__SD1_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
97 MX6_PAD_SD1_DAT0__SD1_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
98 MX6_PAD_SD1_DAT1__SD1_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
99 MX6_PAD_SD1_DAT2__SD1_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
100 MX6_PAD_SD1_DAT3__SD1_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
101};
102
Heiko Schocher7254d922015-05-18 13:32:31 +0200103int dram_init(void)
Heiko Schocher2f6bb0a2014-10-30 13:14:03 +0100104{
Fabio Estevam84c51682016-07-23 13:23:39 -0300105 gd->ram_size = imx_ddr_size();
Heiko Schocher2f6bb0a2014-10-30 13:14:03 +0100106
Heiko Schocher7254d922015-05-18 13:32:31 +0200107 return 0;
Heiko Schochere379c032014-07-18 06:07:22 +0200108}
109
110#ifdef CONFIG_FSL_ESDHC
111struct fsl_esdhc_cfg usdhc_cfg[2] = {
112 {USDHC1_BASE_ADDR},
113 {USDHC2_BASE_ADDR},
114};
115
116int board_mmc_getcd(struct mmc *mmc)
117{
118 return 1;
119}
120
121int board_mmc_init(bd_t *bis)
122{
123 usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
Heiko Schochere379c032014-07-18 06:07:22 +0200124 imx_iomux_v3_setup_multiple_pads(usdhc1_pads, ARRAY_SIZE(usdhc1_pads));
Heiko Schocher7254d922015-05-18 13:32:31 +0200125#if (CONFIG_SYS_BOARD_VERSION == 2)
126 /*
127 * usdhc2 has a levelshifter on the carrier board Rev. DV1,
128 * that will automatically detect the driving direction.
129 * During initialisation this isn't working correctly,
130 * which causes DAT3 to be driven low towards the SD-card.
131 * This causes a SD-card enetring the SPI-Mode
132 * and therefore getting inaccessible until next power cycle.
133 * As workaround we drive the DAT3 line as GPIO and set it high.
134 * This makes usdhc2 unusable in u-boot, but works for the
135 * initialisation in Linux
136 */
137 imx_iomux_v3_setup_pad(MX6_PAD_SD2_DAT3__GPIO1_IO12 |
138 MUX_PAD_CTRL(NO_PAD_CTRL));
139 gpio_direction_output(IMX_GPIO_NR(1, 12) , 1);
140#endif
141 return fsl_esdhc_initialize(bis, &usdhc_cfg[0]);
Heiko Schochere379c032014-07-18 06:07:22 +0200142}
143#endif
144
145/*
146 * Do not overwrite the console
147 * Use always serial for U-Boot console
148 */
149int overwrite_console(void)
150{
151 return 1;
152}
153
Heiko Schochere379c032014-07-18 06:07:22 +0200154struct display_info_t const displays[] = {
155 {
156 .bus = -1,
157 .addr = 0,
158 .pixfmt = IPU_PIX_FMT_RGB24,
159 .detect = NULL,
160 .enable = enable_lvds,
161 .mode = {
162 .name = "lb07wv8",
163 .refresh = 60,
164 .xres = 800,
165 .yres = 480,
Heiko Schocherd0d005b2015-08-11 08:09:44 +0200166 .pixclock = 30066,
Heiko Schochere379c032014-07-18 06:07:22 +0200167 .left_margin = 88,
168 .right_margin = 88,
Heiko Schocherd0d005b2015-08-11 08:09:44 +0200169 .upper_margin = 20,
170 .lower_margin = 20,
Heiko Schocherb4b39a72015-01-20 10:06:18 +0100171 .hsync_len = 80,
Heiko Schocherd0d005b2015-08-11 08:09:44 +0200172 .vsync_len = 5,
173 .sync = FB_SYNC_EXT,
Heiko Schochere379c032014-07-18 06:07:22 +0200174 .vmode = FB_VMODE_NONINTERLACED
175 }
176 }
Heiko Schocher96270842015-08-24 11:36:40 +0200177#if ((CONFIG_SYS_BOARD_VERSION == 2) || (CONFIG_SYS_BOARD_VERSION == 3))
Heiko Schocher7254d922015-05-18 13:32:31 +0200178 , {
179 .bus = -1,
180 .addr = 0,
181 .pixfmt = IPU_PIX_FMT_RGB24,
182 .detect = NULL,
183 .enable = enable_spi_display,
184 .mode = {
185 .name = "lg4573",
Heiko Schocherd0d005b2015-08-11 08:09:44 +0200186 .refresh = 57,
Heiko Schocher7254d922015-05-18 13:32:31 +0200187 .xres = 480,
188 .yres = 800,
189 .pixclock = 37037,
190 .left_margin = 59,
191 .right_margin = 10,
192 .upper_margin = 15,
193 .lower_margin = 15,
194 .hsync_len = 10,
195 .vsync_len = 15,
196 .sync = FB_SYNC_EXT | FB_SYNC_HOR_HIGH_ACT |
197 FB_SYNC_VERT_HIGH_ACT,
198 .vmode = FB_VMODE_NONINTERLACED
199 }
200 }
201#endif
Heiko Schochere379c032014-07-18 06:07:22 +0200202};
203size_t display_count = ARRAY_SIZE(displays);
204
Heiko Schochere379c032014-07-18 06:07:22 +0200205/* no console on this board */
206int board_cfb_skip(void)
207{
208 return 1;
209}
Heiko Schochere379c032014-07-18 06:07:22 +0200210
211iomux_v3_cfg_t nfc_pads[] = {
212 MX6_PAD_NANDF_CLE__NAND_CLE | MUX_PAD_CTRL(NO_PAD_CTRL),
213 MX6_PAD_NANDF_ALE__NAND_ALE | MUX_PAD_CTRL(NO_PAD_CTRL),
214 MX6_PAD_NANDF_WP_B__NAND_WP_B | MUX_PAD_CTRL(NO_PAD_CTRL),
215 MX6_PAD_NANDF_RB0__NAND_READY_B | MUX_PAD_CTRL(NO_PAD_CTRL),
216 MX6_PAD_NANDF_CS0__NAND_CE0_B | MUX_PAD_CTRL(NO_PAD_CTRL),
Heiko Schochere379c032014-07-18 06:07:22 +0200217 MX6_PAD_SD4_CMD__NAND_RE_B | MUX_PAD_CTRL(NO_PAD_CTRL),
218 MX6_PAD_SD4_CLK__NAND_WE_B | MUX_PAD_CTRL(NO_PAD_CTRL),
219 MX6_PAD_NANDF_D0__NAND_DATA00 | MUX_PAD_CTRL(NO_PAD_CTRL),
220 MX6_PAD_NANDF_D1__NAND_DATA01 | MUX_PAD_CTRL(NO_PAD_CTRL),
221 MX6_PAD_NANDF_D2__NAND_DATA02 | MUX_PAD_CTRL(NO_PAD_CTRL),
222 MX6_PAD_NANDF_D3__NAND_DATA03 | MUX_PAD_CTRL(NO_PAD_CTRL),
223 MX6_PAD_NANDF_D4__NAND_DATA04 | MUX_PAD_CTRL(NO_PAD_CTRL),
224 MX6_PAD_NANDF_D5__NAND_DATA05 | MUX_PAD_CTRL(NO_PAD_CTRL),
225 MX6_PAD_NANDF_D6__NAND_DATA06 | MUX_PAD_CTRL(NO_PAD_CTRL),
226 MX6_PAD_NANDF_D7__NAND_DATA07 | MUX_PAD_CTRL(NO_PAD_CTRL),
227 MX6_PAD_SD4_DAT0__NAND_DQS | MUX_PAD_CTRL(NO_PAD_CTRL),
228};
229
230static void setup_gpmi_nand(void)
231{
232 struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
233
234 /* config gpmi nand iomux */
235 imx_iomux_v3_setup_multiple_pads(nfc_pads,
236 ARRAY_SIZE(nfc_pads));
237
Heiko Schocher7254d922015-05-18 13:32:31 +0200238 /* gate ENFC_CLK_ROOT clock first,before clk source switch */
239 clrbits_le32(&mxc_ccm->CCGR2, MXC_CCM_CCGR2_IOMUX_IPT_CLK_IO_MASK);
240
Heiko Schochere379c032014-07-18 06:07:22 +0200241 /* config gpmi and bch clock to 100 MHz */
242 clrsetbits_le32(&mxc_ccm->cs2cdr,
243 MXC_CCM_CS2CDR_ENFC_CLK_PODF_MASK |
244 MXC_CCM_CS2CDR_ENFC_CLK_PRED_MASK |
245 MXC_CCM_CS2CDR_ENFC_CLK_SEL_MASK,
246 MXC_CCM_CS2CDR_ENFC_CLK_PODF(0) |
247 MXC_CCM_CS2CDR_ENFC_CLK_PRED(3) |
248 MXC_CCM_CS2CDR_ENFC_CLK_SEL(3));
249
Heiko Schocher7254d922015-05-18 13:32:31 +0200250 /* enable ENFC_CLK_ROOT clock */
251 setbits_le32(&mxc_ccm->CCGR2, MXC_CCM_CCGR2_IOMUX_IPT_CLK_IO_MASK);
252
Heiko Schochere379c032014-07-18 06:07:22 +0200253 /* enable gpmi and bch clock gating */
254 setbits_le32(&mxc_ccm->CCGR4,
255 MXC_CCM_CCGR4_RAWNAND_U_BCH_INPUT_APB_MASK |
256 MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_BCH_MASK |
257 MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_GPMI_IO_MASK |
258 MXC_CCM_CCGR4_RAWNAND_U_GPMI_INPUT_APB_MASK |
259 MXC_CCM_CCGR4_PL301_MX6QPER1_BCH_OFFSET);
260
261 /* enable apbh clock gating */
262 setbits_le32(&mxc_ccm->CCGR0, MXC_CCM_CCGR0_APBHDMA_MASK);
263}
264
265int board_init(void)
266{
267 struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
268
269 /* address of boot parameters */
270 gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
271
272 setup_spi();
273
274 setup_i2c(0, CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE,
275 &i2c_pad_info1);
276 setup_i2c(1, CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE,
277 &i2c_pad_info2);
278 setup_i2c(2, CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE,
279 &i2c_pad_info3);
Heiko Schocher7254d922015-05-18 13:32:31 +0200280 setup_i2c4();
Heiko Schochere379c032014-07-18 06:07:22 +0200281
282 /* SPI NOR Flash read only */
283 gpio_request(CONFIG_GPIO_ENABLE_SPI_FLASH, "ena_spi_nor");
284 gpio_direction_output(CONFIG_GPIO_ENABLE_SPI_FLASH, 0);
285 gpio_free(CONFIG_GPIO_ENABLE_SPI_FLASH);
286
Heiko Schocher7254d922015-05-18 13:32:31 +0200287 setup_board_gpio();
Heiko Schochere379c032014-07-18 06:07:22 +0200288 setup_gpmi_nand();
Heiko Schocher7254d922015-05-18 13:32:31 +0200289 setup_board_spi();
Heiko Schochere379c032014-07-18 06:07:22 +0200290
291 /* GPIO_1 for USB_OTG_ID */
Heiko Schocher7254d922015-05-18 13:32:31 +0200292 clrsetbits_le32(&iomux->gpr[1], IOMUXC_GPR1_USB_OTG_ID_SEL_MASK, 0);
Heiko Schochere379c032014-07-18 06:07:22 +0200293 imx_iomux_v3_setup_multiple_pads(misc_pads, ARRAY_SIZE(misc_pads));
Heiko Schochere379c032014-07-18 06:07:22 +0200294 return 0;
295}
296
297int checkboard(void)
298{
Heiko Schocher7254d922015-05-18 13:32:31 +0200299 printf("Board: %s\n", CONFIG_BOARDNAME);
Heiko Schochere379c032014-07-18 06:07:22 +0200300 return 0;
301}
302
303#ifdef CONFIG_USB_EHCI_MX6
304int board_ehci_hcd_init(int port)
305{
306 int ret;
307
308 ret = gpio_request(ARISTAINETOS_USB_H1_PWR, "usb-h1-pwr");
309 if (!ret)
310 gpio_direction_output(ARISTAINETOS_USB_H1_PWR, 1);
311 ret = gpio_request(ARISTAINETOS_USB_OTG_PWR, "usb-OTG-pwr");
312 if (!ret)
313 gpio_direction_output(ARISTAINETOS_USB_OTG_PWR, 1);
314 return 0;
315}
316
317int board_ehci_power(int port, int on)
318{
319 if (port)
320 gpio_set_value(ARISTAINETOS_USB_OTG_PWR, on);
321 else
322 gpio_set_value(ARISTAINETOS_USB_H1_PWR, on);
323 return 0;
324}
325#endif