| Álvaro Fernández Rojas | 6471a22 | 2017-04-25 00:39:23 +0200 | [diff] [blame] | 1 | /* |
| 2 | * Copyright (C) 2017 Álvaro Fernández Rojas <noltari@gmail.com> |
| 3 | * |
| 4 | * SPDX-License-Identifier: GPL-2.0+ |
| 5 | */ |
| 6 | |
| 7 | #include <dt-bindings/gpio/gpio.h> |
| 8 | #include "skeleton.dtsi" |
| 9 | |
| 10 | / { |
| 11 | compatible = "brcm,bcm6328"; |
| 12 | |
| 13 | cpus { |
| 14 | reg = <0x10000000 0x4>; |
| 15 | #address-cells = <1>; |
| 16 | #size-cells = <0>; |
| 17 | u-boot,dm-pre-reloc; |
| 18 | |
| 19 | cpu@0 { |
| 20 | compatible = "brcm,bcm6328-cpu", "mips,mips4Kc"; |
| 21 | device_type = "cpu"; |
| 22 | reg = <0>; |
| 23 | u-boot,dm-pre-reloc; |
| 24 | }; |
| 25 | |
| 26 | cpu@1 { |
| 27 | compatible = "brcm,bcm6328-cpu", "mips,mips4Kc"; |
| 28 | device_type = "cpu"; |
| 29 | reg = <1>; |
| 30 | u-boot,dm-pre-reloc; |
| 31 | }; |
| 32 | }; |
| 33 | |
| 34 | clocks { |
| 35 | compatible = "simple-bus"; |
| 36 | #address-cells = <1>; |
| 37 | #size-cells = <1>; |
| 38 | u-boot,dm-pre-reloc; |
| 39 | |
| 40 | periph_osc: periph-osc { |
| 41 | compatible = "fixed-clock"; |
| 42 | #clock-cells = <0>; |
| 43 | clock-frequency = <50000000>; |
| 44 | u-boot,dm-pre-reloc; |
| 45 | }; |
| 46 | }; |
| 47 | |
| 48 | ubus { |
| 49 | compatible = "simple-bus"; |
| 50 | #address-cells = <1>; |
| 51 | #size-cells = <1>; |
| 52 | u-boot,dm-pre-reloc; |
| 53 | |
| 54 | pll_cntl: syscon@10000068 { |
| 55 | compatible = "syscon"; |
| 56 | reg = <0x10000068 0x4>; |
| 57 | }; |
| 58 | |
| 59 | syscon-reboot { |
| 60 | compatible = "syscon-reboot"; |
| 61 | regmap = <&pll_cntl>; |
| 62 | offset = <0x0>; |
| 63 | mask = <0x1>; |
| 64 | }; |
| 65 | |
| Álvaro Fernández Rojas | 320186f | 2017-05-07 20:09:32 +0200 | [diff] [blame^] | 66 | gpio: gpio-controller@10000084 { |
| 67 | compatible = "brcm,bcm6345-gpio"; |
| 68 | reg = <0x10000084 0x4>, <0x1000008c 0x4>; |
| 69 | gpio-controller; |
| 70 | #gpio-cells = <2>; |
| 71 | |
| 72 | status = "disabled"; |
| 73 | }; |
| 74 | |
| Álvaro Fernández Rojas | 6471a22 | 2017-04-25 00:39:23 +0200 | [diff] [blame] | 75 | uart0: serial@10000100 { |
| 76 | compatible = "brcm,bcm6345-uart"; |
| 77 | reg = <0x10000100 0x18>; |
| 78 | clocks = <&periph_osc>; |
| 79 | |
| 80 | status = "disabled"; |
| 81 | }; |
| 82 | |
| 83 | uart1: serial@10000120 { |
| 84 | compatible = "brcm,bcm6345-uart"; |
| 85 | reg = <0x10000120 0x18>; |
| 86 | clocks = <&periph_osc>; |
| 87 | |
| 88 | status = "disabled"; |
| 89 | }; |
| 90 | |
| 91 | memory-controller@10003000 { |
| 92 | compatible = "brcm,bcm6328-mc"; |
| 93 | reg = <0x10003000 0x1000>; |
| 94 | u-boot,dm-pre-reloc; |
| 95 | }; |
| 96 | }; |
| 97 | }; |