blob: 02b17b105791d4d1817260cfac292a4bbbffca44 [file] [log] [blame]
Masahiro Yamada22433fc2014-02-04 17:24:27 +09001# Backward compatibility
2asflags-y += $(EXTRA_AFLAGS)
3ccflags-y += $(EXTRA_CFLAGS)
4cppflags-y += $(EXTRA_CPPFLAGS)
5ldflags-y += $(EXTRA_LDFLAGS)
6
7#
8# flags that take effect in sub directories
9export KBUILD_SUBDIR_ASFLAGS := $(KBUILD_SUBDIR_ASFLAGS) $(subdir-asflags-y)
10export KBUILD_SUBDIR_CCFLAGS := $(KBUILD_SUBDIR_CCFLAGS) $(subdir-ccflags-y)
11
12# Figure out what we need to build from the various variables
13# ===========================================================================
14
15# When an object is listed to be built compiled-in and modular,
16# only build the compiled-in version
17
18obj-m := $(filter-out $(obj-y),$(obj-m))
19
20# Libraries are always collected in one lib file.
21# Filter out objects already built-in
22
23lib-y := $(filter-out $(obj-y), $(sort $(lib-y) $(lib-m)))
24
25
26# Handle objects in subdirs
27# ---------------------------------------------------------------------------
28# o if we encounter foo/ in $(obj-y), replace it by foo/built-in.o
29# and add the directory to the list of dirs to descend into: $(subdir-y)
30# o if we encounter foo/ in $(obj-m), remove it from $(obj-m)
31# and add the directory to the list of dirs to descend into: $(subdir-m)
32
33# Determine modorder.
34# Unfortunately, we don't have information about ordering between -y
35# and -m subdirs. Just put -y's first.
36modorder := $(patsubst %/,%/modules.order, $(filter %/, $(obj-y)) $(obj-m:.o=.ko))
37
38__subdir-y := $(patsubst %/,%,$(filter %/, $(obj-y)))
39subdir-y += $(__subdir-y)
40__subdir-m := $(patsubst %/,%,$(filter %/, $(obj-m)))
41subdir-m += $(__subdir-m)
42obj-y := $(patsubst %/, %/built-in.o, $(obj-y))
43obj-m := $(filter-out %/, $(obj-m))
44
45# Subdirectories we need to descend into
46
47subdir-ym := $(sort $(subdir-y) $(subdir-m))
48
49# if $(foo-objs) exists, foo.o is a composite object
50multi-used-y := $(sort $(foreach m,$(obj-y), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y))), $(m))))
51multi-used-m := $(sort $(foreach m,$(obj-m), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y))), $(m))))
52multi-used := $(multi-used-y) $(multi-used-m)
53single-used-m := $(sort $(filter-out $(multi-used-m),$(obj-m)))
54
55# Build list of the parts of our composite objects, our composite
56# objects depend on those (obviously)
57multi-objs-y := $(foreach m, $(multi-used-y), $($(m:.o=-objs)) $($(m:.o=-y)))
58multi-objs-m := $(foreach m, $(multi-used-m), $($(m:.o=-objs)) $($(m:.o=-y)))
59multi-objs := $(multi-objs-y) $(multi-objs-m)
60
61# $(subdir-obj-y) is the list of objects in $(obj-y) which uses dir/ to
62# tell kbuild to descend
63subdir-obj-y := $(filter %/built-in.o, $(obj-y))
64
65# $(obj-dirs) is a list of directories that contain object files
66obj-dirs := $(dir $(multi-objs) $(obj-y))
67
68# Replace multi-part objects by their individual parts, look at local dir only
69real-objs-y := $(foreach m, $(filter-out $(subdir-obj-y), $(obj-y)), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y))),$($(m:.o=-objs)) $($(m:.o=-y)),$(m))) $(extra-y)
70real-objs-m := $(foreach m, $(obj-m), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y))),$($(m:.o=-objs)) $($(m:.o=-y)),$(m)))
71
72# Add subdir path
73
74extra-y := $(addprefix $(obj)/,$(extra-y))
75always := $(addprefix $(obj)/,$(always))
76targets := $(addprefix $(obj)/,$(targets))
77modorder := $(addprefix $(obj)/,$(modorder))
78obj-y := $(addprefix $(obj)/,$(obj-y))
79obj-m := $(addprefix $(obj)/,$(obj-m))
80lib-y := $(addprefix $(obj)/,$(lib-y))
81subdir-obj-y := $(addprefix $(obj)/,$(subdir-obj-y))
82real-objs-y := $(addprefix $(obj)/,$(real-objs-y))
83real-objs-m := $(addprefix $(obj)/,$(real-objs-m))
84single-used-m := $(addprefix $(obj)/,$(single-used-m))
85multi-used-y := $(addprefix $(obj)/,$(multi-used-y))
86multi-used-m := $(addprefix $(obj)/,$(multi-used-m))
87multi-objs-y := $(addprefix $(obj)/,$(multi-objs-y))
88multi-objs-m := $(addprefix $(obj)/,$(multi-objs-m))
89subdir-ym := $(addprefix $(obj)/,$(subdir-ym))
90obj-dirs := $(addprefix $(obj)/,$(obj-dirs))
91
92# These flags are needed for modversions and compiling, so we define them here
93# already
94# $(modname_flags) #defines KBUILD_MODNAME as the name of the module it will
95# end up in (or would, if it gets compiled in)
96# Note: Files that end up in two or more modules are compiled without the
97# KBUILD_MODNAME definition. The reason is that any made-up name would
98# differ in different configs.
99name-fix = $(subst $(comma),_,$(subst -,_,$1))
100basename_flags = -D"KBUILD_BASENAME=KBUILD_STR($(call name-fix,$(basetarget)))"
101modname_flags = $(if $(filter 1,$(words $(modname))),\
102 -D"KBUILD_MODNAME=KBUILD_STR($(call name-fix,$(modname)))")
103
Masahiro Yamada6825a952014-02-04 17:24:28 +0900104# U-Boot also uses $(CPPFLAGS)
105orig_c_flags = $(KBUILD_CPPFLAGS) $(CPPFLAGS) $(KBUILD_CFLAGS) $(KBUILD_SUBDIR_CCFLAGS) \
Masahiro Yamada22433fc2014-02-04 17:24:27 +0900106 $(ccflags-y) $(CFLAGS_$(basetarget).o)
107_c_flags = $(filter-out $(CFLAGS_REMOVE_$(basetarget).o), $(orig_c_flags))
Masahiro Yamada6825a952014-02-04 17:24:28 +0900108_a_flags = $(KBUILD_CPPFLAGS) $(CPPFLAGS) $(KBUILD_AFLAGS) $(KBUILD_SUBDIR_ASFLAGS) \
Masahiro Yamada22433fc2014-02-04 17:24:27 +0900109 $(asflags-y) $(AFLAGS_$(basetarget).o)
Masahiro Yamada6825a952014-02-04 17:24:28 +0900110_cpp_flags = $(KBUILD_CPPFLAGS) $(CPPFLAGS) $(cppflags-y) $(CPPFLAGS_$(@F))
Masahiro Yamada22433fc2014-02-04 17:24:27 +0900111
112#
113# Enable gcov profiling flags for a file, directory or for all files depending
114# on variables GCOV_PROFILE_obj.o, GCOV_PROFILE and CONFIG_GCOV_PROFILE_ALL
115# (in this order)
116#
117ifeq ($(CONFIG_GCOV_KERNEL),y)
118_c_flags += $(if $(patsubst n%,, \
119 $(GCOV_PROFILE_$(basetarget).o)$(GCOV_PROFILE)$(CONFIG_GCOV_PROFILE_ALL)), \
120 $(CFLAGS_GCOV))
121endif
122
123# If building the kernel in a separate objtree expand all occurrences
124# of -Idir to -I$(srctree)/dir except for absolute paths (starting with '/').
125
126ifeq ($(KBUILD_SRC),)
127__c_flags = $(_c_flags)
128__a_flags = $(_a_flags)
129__cpp_flags = $(_cpp_flags)
130else
131
132# -I$(obj) locates generated .h files
133# $(call addtree,-I$(obj)) locates .h files in srctree, from generated .c files
134# and locates generated .h files
135# FIXME: Replace both with specific CFLAGS* statements in the makefiles
136__c_flags = $(call addtree,-I$(obj)) $(call flags,_c_flags)
137__a_flags = $(call flags,_a_flags)
138__cpp_flags = $(call flags,_cpp_flags)
139endif
140
Masahiro Yamada6825a952014-02-04 17:24:28 +0900141# Modified for U-Boot: LINUXINCLUDE -> UBOOTINCLUDE
142c_flags = -Wp,-MD,$(depfile) $(NOSTDINC_FLAGS) $(UBOOTINCLUDE) \
Masahiro Yamada22433fc2014-02-04 17:24:27 +0900143 $(__c_flags) $(modkern_cflags) \
144 -D"KBUILD_STR(s)=\#s" $(basename_flags) $(modname_flags)
145
Masahiro Yamada6825a952014-02-04 17:24:28 +0900146a_flags = -Wp,-MD,$(depfile) $(NOSTDINC_FLAGS) $(UBOOTINCLUDE) \
Masahiro Yamada22433fc2014-02-04 17:24:27 +0900147 $(__a_flags) $(modkern_aflags)
148
Masahiro Yamada6825a952014-02-04 17:24:28 +0900149cpp_flags = -Wp,-MD,$(depfile) $(NOSTDINC_FLAGS) $(UBOOTINCLUDE) \
Masahiro Yamada22433fc2014-02-04 17:24:27 +0900150 $(__cpp_flags)
151
152ld_flags = $(LDFLAGS) $(ldflags-y)
153
Masahiro Yamada6ab6b2a2014-02-05 11:28:25 +0900154# Modified for U-Boot
Masahiro Yamada22433fc2014-02-04 17:24:27 +0900155dtc_cpp_flags = -Wp,-MD,$(depfile).pre.tmp -nostdinc \
Masahiro Yamada6ab6b2a2014-02-05 11:28:25 +0900156 -I$(srctree)/arch/$(ARCH)/dts \
Masahiro Yamada22433fc2014-02-04 17:24:27 +0900157 -undef -D__DTS__
158
159# Finds the multi-part object the current object will be linked into
160modname-multi = $(sort $(foreach m,$(multi-used),\
161 $(if $(filter $(subst $(obj)/,,$*.o), $($(m:.o=-objs)) $($(m:.o=-y))),$(m:.o=))))
162
163ifdef REGENERATE_PARSERS
164
165# GPERF
166# ---------------------------------------------------------------------------
167quiet_cmd_gperf = GPERF $@
168 cmd_gperf = gperf -t --output-file $@ -a -C -E -g -k 1,3,$$ -p -t $<
169
170.PRECIOUS: $(src)/%.hash.c_shipped
171$(src)/%.hash.c_shipped: $(src)/%.gperf
172 $(call cmd,gperf)
173
174# LEX
175# ---------------------------------------------------------------------------
176LEX_PREFIX = $(if $(LEX_PREFIX_${baseprereq}),$(LEX_PREFIX_${baseprereq}),yy)
177
178quiet_cmd_flex = LEX $@
179 cmd_flex = flex -o$@ -L -P $(LEX_PREFIX) $<
180
181.PRECIOUS: $(src)/%.lex.c_shipped
182$(src)/%.lex.c_shipped: $(src)/%.l
183 $(call cmd,flex)
184
185# YACC
186# ---------------------------------------------------------------------------
187YACC_PREFIX = $(if $(YACC_PREFIX_${baseprereq}),$(YACC_PREFIX_${baseprereq}),yy)
188
189quiet_cmd_bison = YACC $@
190 cmd_bison = bison -o$@ -t -l -p $(YACC_PREFIX) $<
191
192.PRECIOUS: $(src)/%.tab.c_shipped
193$(src)/%.tab.c_shipped: $(src)/%.y
194 $(call cmd,bison)
195
196quiet_cmd_bison_h = YACC $@
197 cmd_bison_h = bison -o/dev/null --defines=$@ -t -l -p $(YACC_PREFIX) $<
198
199.PRECIOUS: $(src)/%.tab.h_shipped
200$(src)/%.tab.h_shipped: $(src)/%.y
201 $(call cmd,bison_h)
202
203endif
204
205# Shipped files
206# ===========================================================================
207
208quiet_cmd_shipped = SHIPPED $@
209cmd_shipped = cat $< > $@
210
211$(obj)/%: $(src)/%_shipped
212 $(call cmd,shipped)
213
214# Commands useful for building a boot image
215# ===========================================================================
216#
217# Use as following:
218#
219# target: source(s) FORCE
220# $(if_changed,ld/objcopy/gzip)
221#
222# and add target to extra-y so that we know we have to
223# read in the saved command line
224
225# Linking
226# ---------------------------------------------------------------------------
227
228quiet_cmd_ld = LD $@
229cmd_ld = $(LD) $(LDFLAGS) $(ldflags-y) $(LDFLAGS_$(@F)) \
230 $(filter-out FORCE,$^) -o $@
231
232# Objcopy
233# ---------------------------------------------------------------------------
234
235quiet_cmd_objcopy = OBJCOPY $@
236cmd_objcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@
237
238# Gzip
239# ---------------------------------------------------------------------------
240
241quiet_cmd_gzip = GZIP $@
242cmd_gzip = (cat $(filter-out FORCE,$^) | gzip -n -f -9 > $@) || \
243 (rm -f $@ ; false)
244
245# DTC
246# ---------------------------------------------------------------------------
247
248# Generate an assembly file to wrap the output of the device tree compiler
249quiet_cmd_dt_S_dtb= DTB $@
Masahiro Yamada6ab6b2a2014-02-05 11:28:25 +0900250# Modified for U-Boot
Masahiro Yamada22433fc2014-02-04 17:24:27 +0900251cmd_dt_S_dtb= \
252( \
Masahiro Yamada22433fc2014-02-04 17:24:27 +0900253 echo '.section .dtb.init.rodata,"a"'; \
Masahiro Yamada22433fc2014-02-04 17:24:27 +0900254 echo '.global __dtb_$(*F)_begin'; \
255 echo '__dtb_$(*F)_begin:'; \
256 echo '.incbin "$<" '; \
257 echo '__dtb_$(*F)_end:'; \
258 echo '.global __dtb_$(*F)_end'; \
Masahiro Yamada22433fc2014-02-04 17:24:27 +0900259) > $@
260
261$(obj)/%.dtb.S: $(obj)/%.dtb
262 $(call cmd,dt_S_dtb)
263
264quiet_cmd_dtc = DTC $@
Masahiro Yamada6ab6b2a2014-02-05 11:28:25 +0900265# Modified for U-Boot
Masahiro Yamada22433fc2014-02-04 17:24:27 +0900266cmd_dtc = $(CPP) $(dtc_cpp_flags) -x assembler-with-cpp -o $(dtc-tmp) $< ; \
Masahiro Yamada6ab6b2a2014-02-05 11:28:25 +0900267 dtc -O dtb -o $@ -b 0 \
Masahiro Yamada22433fc2014-02-04 17:24:27 +0900268 -i $(dir $<) $(DTC_FLAGS) \
269 -d $(depfile).dtc.tmp $(dtc-tmp) ; \
270 cat $(depfile).pre.tmp $(depfile).dtc.tmp > $(depfile)
271
272$(obj)/%.dtb: $(src)/%.dts FORCE
273 $(call if_changed_dep,dtc)
274
275dtc-tmp = $(subst $(comma),_,$(dot-target).dts.tmp)
276
277# Bzip2
278# ---------------------------------------------------------------------------
279
280# Bzip2 and LZMA do not include size in file... so we have to fake that;
281# append the size as a 32-bit littleendian number as gzip does.
282size_append = printf $(shell \
283dec_size=0; \
284for F in $1; do \
285 fsize=$$(stat -c "%s" $$F); \
286 dec_size=$$(expr $$dec_size + $$fsize); \
287done; \
288printf "%08x\n" $$dec_size | \
289 sed 's/\(..\)/\1 /g' | { \
290 read ch0 ch1 ch2 ch3; \
291 for ch in $$ch3 $$ch2 $$ch1 $$ch0; do \
292 printf '%s%03o' '\\' $$((0x$$ch)); \
293 done; \
294 } \
295)
296
297quiet_cmd_bzip2 = BZIP2 $@
298cmd_bzip2 = (cat $(filter-out FORCE,$^) | \
299 bzip2 -9 && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
300 (rm -f $@ ; false)
301
302# Lzma
303# ---------------------------------------------------------------------------
304
305quiet_cmd_lzma = LZMA $@
306cmd_lzma = (cat $(filter-out FORCE,$^) | \
307 lzma -9 && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
308 (rm -f $@ ; false)
309
310quiet_cmd_lzo = LZO $@
311cmd_lzo = (cat $(filter-out FORCE,$^) | \
312 lzop -9 && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
313 (rm -f $@ ; false)
314
315quiet_cmd_lz4 = LZ4 $@
316cmd_lz4 = (cat $(filter-out FORCE,$^) | \
317 lz4c -l -c1 stdin stdout && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
318 (rm -f $@ ; false)
319
320# U-Boot mkimage
321# ---------------------------------------------------------------------------
322
323MKIMAGE := $(srctree)/scripts/mkuboot.sh
324
325# SRCARCH just happens to match slightly more than ARCH (on sparc), so reduces
326# the number of overrides in arch makefiles
327UIMAGE_ARCH ?= $(SRCARCH)
328UIMAGE_COMPRESSION ?= $(if $(2),$(2),none)
329UIMAGE_OPTS-y ?=
330UIMAGE_TYPE ?= kernel
331UIMAGE_LOADADDR ?= arch_must_set_this
332UIMAGE_ENTRYADDR ?= $(UIMAGE_LOADADDR)
333UIMAGE_NAME ?= 'Linux-$(KERNELRELEASE)'
334UIMAGE_IN ?= $<
335UIMAGE_OUT ?= $@
336
337quiet_cmd_uimage = UIMAGE $(UIMAGE_OUT)
338 cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A $(UIMAGE_ARCH) -O linux \
339 -C $(UIMAGE_COMPRESSION) $(UIMAGE_OPTS-y) \
340 -T $(UIMAGE_TYPE) \
341 -a $(UIMAGE_LOADADDR) -e $(UIMAGE_ENTRYADDR) \
342 -n $(UIMAGE_NAME) -d $(UIMAGE_IN) $(UIMAGE_OUT)
343
344# XZ
345# ---------------------------------------------------------------------------
346# Use xzkern to compress the kernel image and xzmisc to compress other things.
347#
348# xzkern uses a big LZMA2 dictionary since it doesn't increase memory usage
349# of the kernel decompressor. A BCJ filter is used if it is available for
350# the target architecture. xzkern also appends uncompressed size of the data
351# using size_append. The .xz format has the size information available at
352# the end of the file too, but it's in more complex format and it's good to
353# avoid changing the part of the boot code that reads the uncompressed size.
354# Note that the bytes added by size_append will make the xz tool think that
355# the file is corrupt. This is expected.
356#
357# xzmisc doesn't use size_append, so it can be used to create normal .xz
358# files. xzmisc uses smaller LZMA2 dictionary than xzkern, because a very
359# big dictionary would increase the memory usage too much in the multi-call
360# decompression mode. A BCJ filter isn't used either.
361quiet_cmd_xzkern = XZKERN $@
362cmd_xzkern = (cat $(filter-out FORCE,$^) | \
363 sh $(srctree)/scripts/xz_wrap.sh && \
364 $(call size_append, $(filter-out FORCE,$^))) > $@ || \
365 (rm -f $@ ; false)
366
367quiet_cmd_xzmisc = XZMISC $@
368cmd_xzmisc = (cat $(filter-out FORCE,$^) | \
369 xz --check=crc32 --lzma2=dict=1MiB) > $@ || \
370 (rm -f $@ ; false)
371
372# misc stuff
373# ---------------------------------------------------------------------------
374quote:="