Andrew Davis | 854d489 | 2023-04-11 13:24:58 -0500 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0-only |
Lokesh Vutla | 40de70f | 2016-11-23 13:25:30 +0530 | [diff] [blame] | 2 | /* |
Andrew Davis | 854d489 | 2023-04-11 13:24:58 -0500 | [diff] [blame] | 3 | * Copyright (C) 2016 Texas Instruments Incorporated - https://www.ti.com/ |
Lokesh Vutla | 40de70f | 2016-11-23 13:25:30 +0530 | [diff] [blame] | 4 | */ |
| 5 | |
| 6 | #include "dra72-evm-common.dtsi" |
Lokesh Vutla | 4ddaa6c | 2017-08-21 12:50:59 +0530 | [diff] [blame] | 7 | #include "dra72x-mmc-iodelay.dtsi" |
Lokesh Vutla | 40de70f | 2016-11-23 13:25:30 +0530 | [diff] [blame] | 8 | #include <dt-bindings/net/ti-dp83867.h> |
| 9 | |
| 10 | / { |
| 11 | compatible = "ti,dra718-evm", "ti,dra718", "ti,dra722", "ti,dra72", "ti,dra7"; |
| 12 | model = "TI DRA718 EVM"; |
| 13 | |
| 14 | memory { |
| 15 | device_type = "memory"; |
| 16 | reg = <0x0 0x80000000 0x0 0x80000000>; /* 2GB */ |
| 17 | }; |
| 18 | |
| 19 | vpo_sd_1v8_3v3: gpio-regulator-TPS74801 { |
| 20 | compatible = "regulator-gpio"; |
| 21 | |
| 22 | regulator-name = "vddshv8"; |
| 23 | regulator-min-microvolt = <1800000>; |
Faiz Abbas | fddfd9c | 2019-04-05 14:18:45 +0530 | [diff] [blame] | 24 | regulator-max-microvolt = <3300000>; |
Lokesh Vutla | 40de70f | 2016-11-23 13:25:30 +0530 | [diff] [blame] | 25 | regulator-boot-on; |
| 26 | vin-supply = <&evm_5v0>; |
| 27 | |
| 28 | gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>; |
| 29 | states = <1800000 0x0 |
Faiz Abbas | fddfd9c | 2019-04-05 14:18:45 +0530 | [diff] [blame] | 30 | 3300000 0x1>; |
Lokesh Vutla | 40de70f | 2016-11-23 13:25:30 +0530 | [diff] [blame] | 31 | }; |
| 32 | |
Lokesh Vutla | 4ddaa6c | 2017-08-21 12:50:59 +0530 | [diff] [blame] | 33 | evm_1v8_sw: fixedregulator-evm_1v8 { |
| 34 | compatible = "regulator-fixed"; |
| 35 | regulator-name = "evm_1v8"; |
| 36 | regulator-min-microvolt = <1800000>; |
| 37 | regulator-max-microvolt = <1800000>; |
| 38 | vin-supply = <&lp8732_buck0_reg>; |
| 39 | regulator-always-on; |
| 40 | regulator-boot-on; |
| 41 | }; |
| 42 | |
Lokesh Vutla | 40de70f | 2016-11-23 13:25:30 +0530 | [diff] [blame] | 43 | poweroff: gpio-poweroff { |
| 44 | compatible = "gpio-poweroff"; |
| 45 | gpios = <&gpio7 30 GPIO_ACTIVE_HIGH>; |
| 46 | input; |
| 47 | }; |
| 48 | }; |
| 49 | |
| 50 | &i2c1 { |
| 51 | status = "okay"; |
| 52 | clock-frequency = <400000>; |
| 53 | |
| 54 | lp8733: lp8733@60 { |
| 55 | compatible = "ti,lp8733"; |
| 56 | reg = <0x60>; |
| 57 | |
| 58 | buck0-in-supply =<&vsys_3v3>; |
| 59 | buck1-in-supply =<&vsys_3v3>; |
| 60 | ldo0-in-supply =<&evm_5v0>; |
| 61 | ldo1-in-supply =<&evm_5v0>; |
| 62 | |
| 63 | lp8733_regulators: regulators { |
| 64 | lp8733_buck0_reg: buck0 { |
| 65 | /* FB_B0 -> LP8733-BUCK1 - VPO_S1_AVS - VDD_CORE_AVS (core, mpu, gpu) */ |
| 66 | regulator-name = "lp8733-buck0"; |
| 67 | regulator-min-microvolt = <850000>; |
| 68 | regulator-max-microvolt = <1250000>; |
| 69 | regulator-always-on; |
| 70 | regulator-boot-on; |
| 71 | }; |
| 72 | |
| 73 | lp8733_buck1_reg: buck1 { |
| 74 | /* FB_B1 -> LP8733-BUCK2 - VPO_S2_AVS - VDD_DSP_AVS (DSP/eve/iva) */ |
| 75 | regulator-name = "lp8733-buck1"; |
| 76 | regulator-min-microvolt = <850000>; |
| 77 | regulator-max-microvolt = <1250000>; |
| 78 | regulator-boot-on; |
| 79 | regulator-always-on; |
| 80 | }; |
| 81 | |
| 82 | lp8733_ldo0_reg: ldo0 { |
| 83 | /* LDO0 -> LP8733-LDO1 - VPO_L1_3V3 - VDDSHV8 (optional) */ |
| 84 | regulator-name = "lp8733-ldo0"; |
| 85 | regulator-min-microvolt = <3300000>; |
| 86 | regulator-max-microvolt = <3300000>; |
| 87 | }; |
| 88 | |
| 89 | lp8733_ldo1_reg: ldo1 { |
| 90 | /* LDO1 -> LP8733-LDO2 - VPO_L2_3V3 - VDDA_USB3V3 */ |
| 91 | regulator-name = "lp8733-ldo1"; |
| 92 | regulator-min-microvolt = <3300000>; |
| 93 | regulator-max-microvolt = <3300000>; |
| 94 | regulator-always-on; |
| 95 | regulator-boot-on; |
| 96 | }; |
| 97 | }; |
| 98 | }; |
| 99 | |
| 100 | lp8732: lp8732@61 { |
| 101 | compatible = "ti,lp8732"; |
| 102 | reg = <0x61>; |
| 103 | |
| 104 | buck0-in-supply =<&vsys_3v3>; |
| 105 | buck1-in-supply =<&vsys_3v3>; |
| 106 | ldo0-in-supply =<&vsys_3v3>; |
| 107 | ldo1-in-supply =<&vsys_3v3>; |
| 108 | |
| 109 | lp8732_regulators: regulators { |
| 110 | lp8732_buck0_reg: buck0 { |
| 111 | /* FB_B0 -> LP8732-BUCK1 - VPO_S3_1V8 - VDDS_1V8 */ |
| 112 | regulator-name = "lp8732-buck0"; |
| 113 | regulator-min-microvolt = <1800000>; |
| 114 | regulator-max-microvolt = <1800000>; |
| 115 | regulator-always-on; |
| 116 | regulator-boot-on; |
| 117 | }; |
| 118 | |
| 119 | lp8732_buck1_reg: buck1 { |
| 120 | /* FB_B1 -> LP8732-BUCK2 - VPO_S4_DDR - VDD_DDR_1V35 */ |
| 121 | regulator-name = "lp8732-buck1"; |
| 122 | regulator-min-microvolt = <1350000>; |
| 123 | regulator-max-microvolt = <1350000>; |
| 124 | regulator-boot-on; |
| 125 | regulator-always-on; |
| 126 | }; |
| 127 | |
| 128 | lp8732_ldo0_reg: ldo0 { |
| 129 | /* LDO0 -> LP8732-LDO1 - VPO_L3_1V8 - VDA_1V8_PLL */ |
| 130 | regulator-name = "lp8732-ldo0"; |
| 131 | regulator-min-microvolt = <1800000>; |
| 132 | regulator-max-microvolt = <1800000>; |
| 133 | regulator-boot-on; |
| 134 | regulator-always-on; |
| 135 | }; |
| 136 | |
| 137 | lp8732_ldo1_reg: ldo1 { |
| 138 | /* LDO1 -> LP8732-LDO2 - VPO_L4_1V8 - VDA_1V8_PHY */ |
| 139 | regulator-name = "lp8732-ldo1"; |
| 140 | regulator-min-microvolt = <1800000>; |
| 141 | regulator-max-microvolt = <1800000>; |
| 142 | regulator-always-on; |
| 143 | regulator-boot-on; |
| 144 | }; |
| 145 | }; |
| 146 | }; |
| 147 | }; |
| 148 | |
Lokesh Vutla | 4ddaa6c | 2017-08-21 12:50:59 +0530 | [diff] [blame] | 149 | &pcf_lcd { |
| 150 | interrupt-parent = <&gpio7>; |
| 151 | interrupts = <31 IRQ_TYPE_EDGE_FALLING>; |
| 152 | }; |
| 153 | |
Lokesh Vutla | 40de70f | 2016-11-23 13:25:30 +0530 | [diff] [blame] | 154 | &pcf_gpio_21 { |
| 155 | interrupt-parent = <&gpio7>; |
| 156 | interrupts = <31 IRQ_TYPE_EDGE_FALLING>; |
| 157 | }; |
| 158 | |
| 159 | &pcf_hdmi { |
Andrew Davis | f8ae3e6 | 2023-04-11 13:25:06 -0500 | [diff] [blame] | 160 | hdmi-i2c-disable-hog { |
Lokesh Vutla | 40de70f | 2016-11-23 13:25:30 +0530 | [diff] [blame] | 161 | /* |
| 162 | * PM_OEn to High: Disable routing I2C3 to PM_I2C |
| 163 | * With this PM_SEL(p3) should not matter |
| 164 | */ |
| 165 | gpio-hog; |
| 166 | gpios = <0 GPIO_ACTIVE_LOW>; |
| 167 | output-high; |
| 168 | line-name = "pm_oe_n"; |
| 169 | }; |
| 170 | }; |
| 171 | |
| 172 | &mmc1 { |
Lokesh Vutla | 4ddaa6c | 2017-08-21 12:50:59 +0530 | [diff] [blame] | 173 | pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104"; |
| 174 | pinctrl-0 = <&mmc1_pins_default>; |
| 175 | pinctrl-1 = <&mmc1_pins_hs>; |
| 176 | pinctrl-2 = <&mmc1_pins_sdr12>; |
| 177 | pinctrl-3 = <&mmc1_pins_sdr25>; |
| 178 | pinctrl-4 = <&mmc1_pins_sdr50>; |
| 179 | pinctrl-5 = <&mmc1_pins_ddr50_rev20 &mmc1_iodelay_ddr50_conf>; |
| 180 | pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev20_conf>; |
| 181 | vqmmc-supply = <&vpo_sd_1v8_3v3>; |
| 182 | }; |
| 183 | |
| 184 | &mmc2 { |
| 185 | pinctrl-names = "default", "hs", "ddr_1_8v", "hs200_1_8v"; |
| 186 | pinctrl-0 = <&mmc2_pins_default>; |
| 187 | pinctrl-1 = <&mmc2_pins_hs>; |
| 188 | pinctrl-2 = <&mmc2_pins_ddr_rev20 &mmc2_iodelay_ddr_conf>; |
| 189 | pinctrl-3 = <&mmc2_pins_hs200 &mmc2_iodelay_hs200_rev20_conf>; |
| 190 | vmmc-supply = <&evm_1v8_sw>; |
Lokesh Vutla | 40de70f | 2016-11-23 13:25:30 +0530 | [diff] [blame] | 191 | }; |
| 192 | |
| 193 | &mac { |
| 194 | mode-gpios = <&pcf_gpio_21 4 GPIO_ACTIVE_LOW>, |
| 195 | <&pcf_hdmi 9 GPIO_ACTIVE_LOW>, /* P11 */ |
| 196 | <&pcf_hdmi 10 GPIO_ACTIVE_LOW>; /* P12 */ |
| 197 | dual_emac; |
| 198 | }; |
| 199 | |
| 200 | &cpsw_emac0 { |
Grygorii Strashko | 68d875d | 2019-08-31 10:30:32 +0300 | [diff] [blame] | 201 | phy-handle = <&dp83867_0>; |
Lokesh Vutla | 40de70f | 2016-11-23 13:25:30 +0530 | [diff] [blame] | 202 | phy-mode = "rgmii-id"; |
| 203 | dual_emac_res_vlan = <1>; |
| 204 | }; |
| 205 | |
| 206 | &cpsw_emac1 { |
Grygorii Strashko | 68d875d | 2019-08-31 10:30:32 +0300 | [diff] [blame] | 207 | phy-handle = <&dp83867_1>; |
Lokesh Vutla | 40de70f | 2016-11-23 13:25:30 +0530 | [diff] [blame] | 208 | phy-mode = "rgmii-id"; |
| 209 | dual_emac_res_vlan = <2>; |
| 210 | }; |
| 211 | |
| 212 | &davinci_mdio { |
| 213 | dp83867_0: ethernet-phy@2 { |
| 214 | reg = <2>; |
| 215 | ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>; |
| 216 | ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>; |
| 217 | ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>; |
Lokesh Vutla | 4ddaa6c | 2017-08-21 12:50:59 +0530 | [diff] [blame] | 218 | ti,min-output-impedance; |
| 219 | ti,dp83867-rxctrl-strap-quirk; |
Lokesh Vutla | 40de70f | 2016-11-23 13:25:30 +0530 | [diff] [blame] | 220 | }; |
| 221 | |
| 222 | dp83867_1: ethernet-phy@3 { |
| 223 | reg = <3>; |
| 224 | ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>; |
| 225 | ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>; |
| 226 | ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>; |
Lokesh Vutla | 4ddaa6c | 2017-08-21 12:50:59 +0530 | [diff] [blame] | 227 | ti,min-output-impedance; |
| 228 | ti,dp83867-rxctrl-strap-quirk; |
Lokesh Vutla | 40de70f | 2016-11-23 13:25:30 +0530 | [diff] [blame] | 229 | }; |
| 230 | }; |
| 231 | |
| 232 | /* No Sata on this device */ |
| 233 | &sata_phy { |
| 234 | status = "disabled"; |
| 235 | }; |
| 236 | |
| 237 | &sata { |
| 238 | status = "disabled"; |
| 239 | }; |
| 240 | |
| 241 | /* No RTC on this device */ |
| 242 | &rtc { |
| 243 | status = "disabled"; |
| 244 | }; |
| 245 | |
| 246 | &usb2_phy1 { |
| 247 | phy-supply = <&lp8733_ldo1_reg>; |
| 248 | }; |
| 249 | |
| 250 | &usb2_phy2 { |
| 251 | phy-supply = <&lp8733_ldo1_reg>; |
| 252 | }; |
| 253 | |
| 254 | &dss { |
| 255 | /* Supplied by VDA_1V8_PLL */ |
| 256 | vdda_video-supply = <&lp8732_ldo0_reg>; |
| 257 | }; |
| 258 | |
| 259 | &hdmi { |
| 260 | /* Supplied by VDA_1V8_PHY */ |
| 261 | vdda_video-supply = <&lp8732_ldo1_reg>; |
| 262 | }; |