blob: 9ef0bfdd86f016bd0ce0f15e15ecdc2acbf7292a [file] [log] [blame]
Joe Hamman9e3ed392007-12-13 06:45:14 -06001/*
2 * Copyright 2007 Wind River Systems <www.windriver.com>
3 * Copyright 2007 Embedded Specialties, Inc.
4 * Copyright 2004, 2007 Freescale Semiconductor.
5 *
6 * See file CREDITS for list of people who contributed to this
7 * project.
8 *
9 * This program is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License as
11 * published by the Free Software Foundation; either version 2 of
12 * the License, or (at your option) any later version.
13 *
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 *
19 * You should have received a copy of the GNU General Public License
20 * along with this program; if not, write to the Free Software
21 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
22 * MA 02111-1307 USA
23 */
24
25/*
26 * sbc8548 board configuration file
27 *
28 * Please refer to doc/README.sbc85xx for more info.
29 *
30 */
31#ifndef __CONFIG_H
32#define __CONFIG_H
33
34/* High Level Configuration Options */
35#define CONFIG_BOOKE 1 /* BOOKE */
36#define CONFIG_E500 1 /* BOOKE e500 family */
37#define CONFIG_MPC85xx 1 /* MPC8540/60/55/41/48 */
38#define CONFIG_MPC8548 1 /* MPC8548 specific */
39#define CONFIG_SBC8548 1 /* SBC8548 board specific */
40
41#undef CONFIG_PCI /* enable any pci type devices */
42#undef CONFIG_PCI1 /* PCI controller 1 */
43#undef CONFIG_PCIE1 /* PCIE controler 1 (slot 1) */
44#undef CONFIG_RIO
45#undef CONFIG_PCI2
46#undef CONFIG_FSL_PCI_INIT /* Use common FSL init code */
47
48#define CONFIG_TSEC_ENET /* tsec ethernet support */
49#define CONFIG_ENV_OVERWRITE
Joe Hamman9e3ed392007-12-13 06:45:14 -060050
Joe Hamman9e3ed392007-12-13 06:45:14 -060051#define CONFIG_INTERRUPTS /* enable pci, srio, ddr interrupts */
52
Kumar Galae2b159d2008-01-16 09:05:27 -060053#define CONFIG_FSL_LAW 1 /* Use common FSL init code */
Joe Hamman9e3ed392007-12-13 06:45:14 -060054
Joe Hamman9e3ed392007-12-13 06:45:14 -060055#define CONFIG_SYS_CLK_FREQ 66000000 /* SBC8548 default SYSCLK */
56
57/*
58 * These can be toggled for performance analysis, otherwise use default.
59 */
60#define CONFIG_L2_CACHE /* toggle L2 cache */
61#define CONFIG_BTB /* toggle branch predition */
62#define CONFIG_ADDR_STREAMING /* toggle addr streaming */
63#define CONFIG_CLEAR_LAW0 /* Clear LAW0 in cpu_init_r */
64
65/*
66 * Only possible on E500 Version 2 or newer cores.
67 */
68#define CONFIG_ENABLE_36BIT_PHYS 1
69
70#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */
71
72#undef CFG_DRAM_TEST /* memory test, takes time */
73#define CFG_MEMTEST_START 0x00200000 /* memtest works on */
74#define CFG_MEMTEST_END 0x00400000
75
76/*
77 * Base addresses -- Note these are effective addresses where the
78 * actual resources get mapped (not physical addresses)
79 */
80#define CFG_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */
81#define CFG_CCSRBAR 0xe0000000 /* relocated CCSRBAR */
Kumar Galaf69766e2008-01-30 14:55:14 -060082#define CFG_CCSRBAR_PHYS CFG_CCSRBAR /* physical addr of CCSRBAR */
Joe Hamman9e3ed392007-12-13 06:45:14 -060083#define CFG_IMMR CFG_CCSRBAR /* PQII uses CFG_IMMR */
84
85#define CFG_PCI1_ADDR (CFG_CCSRBAR+0x8000)
86#define CFG_PCI2_ADDR (CFG_CCSRBAR+0x9000)
87#define CFG_PCIE1_ADDR (CFG_CCSRBAR+0xa000)
88
Kumar Gala33b90792008-08-26 23:15:28 -050089/* DDR Setup */
90#define CONFIG_FSL_DDR2
91#undef CONFIG_FSL_DDR_INTERACTIVE
92#undef CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */
93#undef CONFIG_DDR_SPD
94#undef CONFIG_DDR_ECC /* only for ECC DDR module */
Joe Hamman9e3ed392007-12-13 06:45:14 -060095
Kumar Gala33b90792008-08-26 23:15:28 -050096#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */
97#define CONFIG_MEM_INIT_VALUE 0xDeadBeef
98
99#define CFG_DDR_SDRAM_BASE 0x00000000
100#define CFG_SDRAM_BASE CFG_DDR_SDRAM_BASE
101#define CONFIG_VERY_BIG_RAM
102
103#define CONFIG_NUM_DDR_CONTROLLERS 1
104#define CONFIG_DIMM_SLOTS_PER_CTLR 1
105#define CONFIG_CHIP_SELECTS_PER_CTRL 2
106
107/* I2C addresses of SPD EEPROMs */
108#define SPD_EEPROM_ADDRESS 0x51 /* CTLR 0 DIMM 0 */
Joe Hamman9e3ed392007-12-13 06:45:14 -0600109
110/*
111 * Make sure required options are set
112 */
113#ifndef CONFIG_SPD_EEPROM
114 #define CFG_SDRAM_SIZE 256 /* DDR is 256MB */
115#endif
116
117#undef CONFIG_CLOCKS_IN_MHZ
118
119/*
120 * FLASH on the Local Bus
121 * Two banks, one 8MB the other 64MB, using the CFI driver.
122 * Boot from BR0/OR0 bank at 0xff80_0000
123 * Alternate BR6/OR6 bank at 0xfb80_0000
124 *
125 * BR0:
126 * Base address 0 = 0xff80_0000 = BR0[0:16] = 1111 1111 1000 0000 0
127 * Port Size = 8 bits = BRx[19:20] = 01
128 * Use GPCM = BRx[24:26] = 000
129 * Valid = BRx[31] = 1
130 *
131 * 0 4 8 12 16 20 24 28
132 * 1111 1111 1000 0000 0000 1000 0000 0001 = ff800801 BR0
133 *
134 * BR6:
135 * Base address 6 = 0xfb80_0000 = BR6[0:16] = 1111 1011 1000 0000 0
136 * Port Size = 32 bits = BRx[19:20] = 11
137 * Use GPCM = BRx[24:26] = 000
138 * Valid = BRx[31] = 1
139 *
140 * 0 4 8 12 16 20 24 28
141 * 1111 1011 1000 0000 0001 1000 0000 0001 = fb801801 BR6
142 *
143 * OR0:
144 * Addr Mask = 8M = OR1[0:16] = 1111 1111 1000 0000 0
145 * XAM = OR0[17:18] = 11
146 * CSNT = OR0[20] = 1
147 * ACS = half cycle delay = OR0[21:22] = 11
148 * SCY = 6 = OR0[24:27] = 0110
149 * TRLX = use relaxed timing = OR0[29] = 1
150 * EAD = use external address latch delay = OR0[31] = 1
151 *
152 * 0 4 8 12 16 20 24 28
153 * 1111 1111 1000 0000 0110 1110 0110 0101 = ff806e65 OR0
154 *
155 * OR6:
Jeremy McNicollccf1ad52008-05-02 16:10:04 -0400156 * Addr Mask = 64M = OR6[0:16] = 1111 1000 0000 0000 0
Joe Hamman9e3ed392007-12-13 06:45:14 -0600157 * XAM = OR6[17:18] = 11
158 * CSNT = OR6[20] = 1
159 * ACS = half cycle delay = OR6[21:22] = 11
160 * SCY = 6 = OR6[24:27] = 0110
161 * TRLX = use relaxed timing = OR6[29] = 1
162 * EAD = use external address latch delay = OR6[31] = 1
163 *
164 * 0 4 8 12 16 20 24 28
Jeremy McNicollccf1ad52008-05-02 16:10:04 -0400165 * 1111 1000 0000 0000 0110 1110 0110 0101 = f8006e65 OR6
Joe Hamman9e3ed392007-12-13 06:45:14 -0600166 */
167
168#define CFG_BOOT_BLOCK 0xff800000 /* start of 8MB Flash */
169#define CFG_FLASH_BASE CFG_BOOT_BLOCK /* start of FLASH 16M */
170
171#define CFG_BR0_PRELIM 0xff800801
172#define CFG_BR6_PRELIM 0xfb801801
173
174#define CFG_OR0_PRELIM 0xff806e65
Jeremy McNicollccf1ad52008-05-02 16:10:04 -0400175#define CFG_OR6_PRELIM 0xf8006e65
Joe Hamman9e3ed392007-12-13 06:45:14 -0600176
Jean-Christophe PLAGNIOL-VILLARD495d1622008-02-17 22:56:16 +0100177#define CFG_FLASH_BANKS_LIST {CFG_FLASH_BASE}
Joe Hamman9e3ed392007-12-13 06:45:14 -0600178#define CFG_MAX_FLASH_BANKS 1 /* number of banks */
179#define CFG_MAX_FLASH_SECT 128 /* sectors per device */
180#undef CFG_FLASH_CHECKSUM
181#define CFG_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
182#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
183
Wolfgang Denk53677ef2008-05-20 16:00:29 +0200184#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */
Joe Hamman9e3ed392007-12-13 06:45:14 -0600185
Jean-Christophe PLAGNIOL-VILLARD00b18832008-08-13 01:40:42 +0200186#define CONFIG_FLASH_CFI_DRIVER
Joe Hamman9e3ed392007-12-13 06:45:14 -0600187#define CFG_FLASH_CFI
188#define CFG_FLASH_EMPTY_INFO
189
190/* CS5 = Local bus peripherals controlled by the EPLD */
191
192#define CFG_BR5_PRELIM 0xf8000801
193#define CFG_OR5_PRELIM 0xff006e65
194#define CFG_EPLD_BASE 0xf8000000
195#define CFG_LED_DISP_BASE 0xf8000000
196#define CFG_USER_SWITCHES_BASE 0xf8100000
197#define CFG_BD_REV 0xf8300000
198#define CFG_EEPROM_BASE 0xf8b00000
199
200/*
201 * SDRAM on the Local Bus
202 */
203#define CFG_LBC_SDRAM_BASE 0xf0000000 /* Localbus SDRAM */
204#define CFG_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 64MB */
205
206/*
207 * Base Register 3 and Option Register 3 configure SDRAM.
208 * The SDRAM base address, CFG_LBC_SDRAM_BASE, is 0xf0000000.
209 *
210 * For BR3, need:
211 * Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0
212 * port-size = 32-bits = BR2[19:20] = 11
213 * no parity checking = BR2[21:22] = 00
214 * SDRAM for MSEL = BR2[24:26] = 011
215 * Valid = BR[31] = 1
216 *
217 * 0 4 8 12 16 20 24 28
218 * 1111 0000 0000 0000 0001 1000 0110 0001 = f0001861
219 *
220 */
221
222#define CFG_BR3_PRELIM 0xf0001861
223
224/*
225 * The SDRAM size in MB, CFG_LBC_SDRAM_SIZE, is 64.
226 *
227 * For OR3, need:
228 * 64MB mask for AM, OR3[0:7] = 1111 1100
229 * XAM, OR3[17:18] = 11
230 * 10 columns OR3[19-21] = 011
231 * 12 rows OR3[23-25] = 011
232 * EAD set for extra time OR[31] = 0
233 *
234 * 0 4 8 12 16 20 24 28
235 * 1111 1100 0000 0000 0110 1100 1100 0000 = fc006cc0
236 */
237
238#define CFG_OR3_PRELIM 0xfc006cc0
239
240#define CFG_LBC_LCRR 0x00000002 /* LB clock ratio reg */
241#define CFG_LBC_LBCR 0x00000000 /* LB config reg */
242#define CFG_LBC_LSRT 0x20000000 /* LB sdram refresh timer */
243#define CFG_LBC_MRTPR 0x00000000 /* LB refresh timer prescal*/
244
245/*
246 * LSDMR masks
247 */
248#define CFG_LBC_LSDMR_RFEN (1 << (31 - 1))
249#define CFG_LBC_LSDMR_BSMA1516 (3 << (31 - 10))
250#define CFG_LBC_LSDMR_BSMA1617 (4 << (31 - 10))
251#define CFG_LBC_LSDMR_RFCR16 (7 << (31 - 16))
252#define CFG_LBC_LSDMR_PRETOACT7 (7 << (31 - 19))
253#define CFG_LBC_LSDMR_ACTTORW7 (7 << (31 - 22))
254#define CFG_LBC_LSDMR_ACTTORW6 (6 << (31 - 22))
255#define CFG_LBC_LSDMR_BL8 (1 << (31 - 23))
256#define CFG_LBC_LSDMR_WRC4 (0 << (31 - 27))
257#define CFG_LBC_LSDMR_CL3 (3 << (31 - 31))
258
259#define CFG_LBC_LSDMR_OP_NORMAL (0 << (31 - 4))
260#define CFG_LBC_LSDMR_OP_ARFRSH (1 << (31 - 4))
261#define CFG_LBC_LSDMR_OP_SRFRSH (2 << (31 - 4))
262#define CFG_LBC_LSDMR_OP_MRW (3 << (31 - 4))
263#define CFG_LBC_LSDMR_OP_PRECH (4 << (31 - 4))
264#define CFG_LBC_LSDMR_OP_PCHALL (5 << (31 - 4))
265#define CFG_LBC_LSDMR_OP_ACTBNK (6 << (31 - 4))
266#define CFG_LBC_LSDMR_OP_RWINV (7 << (31 - 4))
267
268/*
269 * Common settings for all Local Bus SDRAM commands.
270 * At run time, either BSMA1516 (for CPU 1.1)
271 * or BSMA1617 (for CPU 1.0) (old)
272 * is OR'ed in too.
273 */
274#define CFG_LBC_LSDMR_COMMON ( CFG_LBC_LSDMR_RFCR16 \
275 | CFG_LBC_LSDMR_PRETOACT7 \
276 | CFG_LBC_LSDMR_ACTTORW7 \
277 | CFG_LBC_LSDMR_BL8 \
278 | CFG_LBC_LSDMR_WRC4 \
279 | CFG_LBC_LSDMR_CL3 \
280 | CFG_LBC_LSDMR_RFEN \
281 )
282
283#define CONFIG_L1_INIT_RAM
284#define CFG_INIT_RAM_LOCK 1
285#define CFG_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */
286#define CFG_INIT_RAM_END 0x4000 /* End of used area in RAM */
287
288#define CFG_INIT_L2_ADDR 0xf8f80000 /* relocate boot L2SRAM */
289
290#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */
291#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
292#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
293
294#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
295#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */
296
297/* Serial Port */
298#define CONFIG_CONS_INDEX 1
299#undef CONFIG_SERIAL_SOFTWARE_FIFO
300#define CFG_NS16550
301#define CFG_NS16550_SERIAL
302#define CFG_NS16550_REG_SIZE 1
303#define CFG_NS16550_CLK 400000000 /* get_bus_freq(0) */
304
305#define CFG_BAUDRATE_TABLE \
306 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
307
308#define CFG_NS16550_COM1 (CFG_CCSRBAR+0x4500)
309#define CFG_NS16550_COM2 (CFG_CCSRBAR+0x4600)
310
311/* Use the HUSH parser */
312#define CFG_HUSH_PARSER
313#ifdef CFG_HUSH_PARSER
314#define CFG_PROMPT_HUSH_PS2 "> "
315#endif
316
317/* pass open firmware flat tree */
318#define CONFIG_OF_LIBFDT 1
319#define CONFIG_OF_BOARD_SETUP 1
320#define CONFIG_OF_STDOUT_VIA_ALIAS 1
321
322/*
323 * I2C
324 */
325#define CONFIG_FSL_I2C /* Use FSL common I2C driver */
326#define CONFIG_HARD_I2C /* I2C with hardware support*/
327#undef CONFIG_SOFT_I2C /* I2C bit-banged */
328#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
329#define CFG_I2C_EEPROM_ADDR 0x50
330#define CFG_I2C_SLAVE 0x7F
331#define CFG_I2C_OFFSET 0x3000
332
333/*
334 * General PCI
335 * Memory space is mapped 1-1, but I/O space must start from 0.
336 */
337#define CFG_PCI_PHYS 0x80000000 /* 1G PCI TLB */
338
339#define CFG_PCI1_MEM_BASE 0x80000000
340#define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE
341#define CFG_PCI1_MEM_SIZE 0x20000000 /* 512M */
342#define CFG_PCI1_IO_BASE 0x00000000
343#define CFG_PCI1_IO_PHYS 0xe2000000
344#define CFG_PCI1_IO_SIZE 0x00100000 /* 1M */
345
346#ifdef CONFIG_PCI2
347#define CFG_PCI2_MEM_BASE 0xa0000000
348#define CFG_PCI2_MEM_PHYS CFG_PCI2_MEM_BASE
349#define CFG_PCI2_MEM_SIZE 0x20000000 /* 512M */
350#define CFG_PCI2_IO_BASE 0x00000000
351#define CFG_PCI2_IO_PHYS 0xe2800000
352#define CFG_PCI2_IO_SIZE 0x00100000 /* 1M */
353#endif
354
355#ifdef CONFIG_PCIE1
356#define CFG_PCIE1_MEM_BASE 0xa0000000
357#define CFG_PCIE1_MEM_PHYS CFG_PCIE1_MEM_BASE
358#define CFG_PCIE1_MEM_SIZE 0x20000000 /* 512M */
359#define CFG_PCIE1_IO_BASE 0x00000000
360#define CFG_PCIE1_IO_PHYS 0xe3000000
361#define CFG_PCIE1_IO_SIZE 0x00100000 /* 1M */
362#endif
363
364#ifdef CONFIG_RIO
365/*
366 * RapidIO MMU
367 */
368#define CFG_RIO_MEM_BASE 0xC0000000
369#define CFG_RIO_MEM_SIZE 0x20000000 /* 512M */
370#endif
371
372#ifdef CONFIG_LEGACY
373#define BRIDGE_ID 17
374#define VIA_ID 2
375#else
376#define BRIDGE_ID 28
377#define VIA_ID 4
378#endif
379
380#if defined(CONFIG_PCI)
381
382#define CONFIG_NET_MULTI
383#define CONFIG_PCI_PNP /* do pci plug-and-play */
384
385#undef CONFIG_EEPRO100
386#undef CONFIG_TULIP
387
388#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
389
390/* PCI view of System Memory */
391#define CFG_PCI_MEMORY_BUS 0x00000000
392#define CFG_PCI_MEMORY_PHYS 0x00000000
393#define CFG_PCI_MEMORY_SIZE 0x80000000
394
395#endif /* CONFIG_PCI */
396
397
398#if defined(CONFIG_TSEC_ENET)
399
400#ifndef CONFIG_NET_MULTI
401#define CONFIG_NET_MULTI 1
402#endif
403
404#define CONFIG_MII 1 /* MII PHY management */
405#define CONFIG_TSEC1 1
406#define CONFIG_TSEC1_NAME "eTSEC0"
407#define CONFIG_TSEC2 1
408#define CONFIG_TSEC2_NAME "eTSEC1"
409#define CONFIG_TSEC3 1
410#define CONFIG_TSEC3_NAME "eTSEC2"
411#define CONFIG_TSEC4
412#define CONFIG_TSEC4_NAME "eTSEC3"
413#undef CONFIG_MPC85XX_FEC
414
415#define TSEC1_PHY_ADDR 0
416#define TSEC2_PHY_ADDR 1
417#define TSEC3_PHY_ADDR 2
418#define TSEC4_PHY_ADDR 3
419
420#define TSEC1_PHYIDX 0
421#define TSEC2_PHYIDX 0
422#define TSEC3_PHYIDX 0
423#define TSEC4_PHYIDX 0
424#define TSEC1_FLAGS TSEC_GIGABIT
425#define TSEC2_FLAGS TSEC_GIGABIT
426#define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
427#define TSEC4_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
428
429/* Options are: eTSEC[0-3] */
430#define CONFIG_ETHPRIME "eTSEC0"
431#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */
432#endif /* CONFIG_TSEC_ENET */
433
434/*
435 * Environment
436 */
437#define CFG_ENV_IS_IN_FLASH 1
438#define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000)
439#define CFG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */
440#define CFG_ENV_SIZE 0x2000
441
442#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
443#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
444
445/*
446 * BOOTP options
447 */
448#define CONFIG_BOOTP_BOOTFILESIZE
449#define CONFIG_BOOTP_BOOTPATH
450#define CONFIG_BOOTP_GATEWAY
451#define CONFIG_BOOTP_HOSTNAME
452
453
454/*
455 * Command line configuration.
456 */
457#include <config_cmd_default.h>
458
459#define CONFIG_CMD_PING
460#define CONFIG_CMD_I2C
461#define CONFIG_CMD_MII
462#define CONFIG_CMD_ELF
463
464#if defined(CONFIG_PCI)
465 #define CONFIG_CMD_PCI
466#endif
467
468
469#undef CONFIG_WATCHDOG /* watchdog disabled */
470
471/*
472 * Miscellaneous configurable options
473 */
474#define CFG_LONGHELP /* undef to save memory */
475#define CFG_LOAD_ADDR 0x2000000 /* default load address */
476#define CFG_PROMPT "=> " /* Monitor Command Prompt */
477#if defined(CONFIG_CMD_KGDB)
478#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
479#else
480#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
481#endif
482#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
483#define CFG_MAXARGS 16 /* max number of command args */
484#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
485#define CFG_HZ 1000 /* decrementer freq: 1ms ticks */
486
487/*
488 * For booting Linux, the board info and command line data
489 * have to be in the first 8 MB of memory, since this is
490 * the maximum mapped by the Linux kernel during initialization.
491 */
492#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/
493
Joe Hamman9e3ed392007-12-13 06:45:14 -0600494/*
495 * Internal Definitions
496 *
497 * Boot Flags
498 */
499#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
500#define BOOTFLAG_WARM 0x02 /* Software reboot */
501
502#if defined(CONFIG_CMD_KGDB)
503#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
504#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
505#endif
506
507/*
508 * Environment Configuration
509 */
510
511/* The mac addresses for all ethernet interface */
512#if defined(CONFIG_TSEC_ENET)
513#define CONFIG_HAS_ETH0
514#define CONFIG_ETHADDR 02:E0:0C:00:00:FD
515#define CONFIG_HAS_ETH1
516#define CONFIG_ETH1ADDR 02:E0:0C:00:01:FD
517#define CONFIG_HAS_ETH2
518#define CONFIG_ETH2ADDR 02:E0:0C:00:02:FD
519#define CONFIG_HAS_ETH3
520#define CONFIG_ETH3ADDR 02:E0:0C:00:03:FD
521#endif
522
523#define CONFIG_IPADDR 192.168.0.55
524
525#define CONFIG_HOSTNAME sbc8548
526#define CONFIG_ROOTPATH /opt/eldk/ppc_85xx
527#define CONFIG_BOOTFILE /uImage
528#define CONFIG_UBOOTPATH /u-boot.bin /* TFTP server */
529
530#define CONFIG_SERVERIP 192.168.0.2
531#define CONFIG_GATEWAYIP 192.168.0.1
532#define CONFIG_NETMASK 255.255.255.0
533
534#define CONFIG_LOADADDR 1000000 /*default location for tftp and bootm*/
535
536#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */
537#undef CONFIG_BOOTARGS /* the boot command will set bootargs*/
538
539#define CONFIG_BAUDRATE 115200
540
541#define CONFIG_EXTRA_ENV_SETTINGS \
542 "netdev=eth0\0" \
543 "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \
544 "tftpflash=tftpboot $loadaddr $uboot; " \
545 "protect off " MK_STR(TEXT_BASE) " +$filesize; " \
546 "erase " MK_STR(TEXT_BASE) " +$filesize; " \
547 "cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; " \
548 "protect on " MK_STR(TEXT_BASE) " +$filesize; " \
549 "cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0" \
550 "consoledev=ttyS0\0" \
551 "ramdiskaddr=2000000\0" \
552 "ramdiskfile=uRamdisk\0" \
553 "fdtaddr=c00000\0" \
554 "fdtfile=sbc8548.dtb\0"
555
556#define CONFIG_NFSBOOTCOMMAND \
557 "setenv bootargs root=/dev/nfs rw " \
558 "nfsroot=$serverip:$rootpath " \
559 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
560 "console=$consoledev,$baudrate $othbootargs;" \
561 "tftp $loadaddr $bootfile;" \
562 "tftp $fdtaddr $fdtfile;" \
563 "bootm $loadaddr - $fdtaddr"
564
565
566#define CONFIG_RAMBOOTCOMMAND \
567 "setenv bootargs root=/dev/ram rw " \
568 "console=$consoledev,$baudrate $othbootargs;" \
569 "tftp $ramdiskaddr $ramdiskfile;" \
570 "tftp $loadaddr $bootfile;" \
571 "tftp $fdtaddr $fdtfile;" \
572 "bootm $loadaddr $ramdiskaddr $fdtaddr"
573
574#define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND
575
576#endif /* __CONFIG_H */