Tom Rini | 83d290c | 2018-05-06 17:58:06 -0400 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0+ |
Piotr Wilczek | 3f41ffe | 2014-03-07 14:59:47 +0100 | [diff] [blame] | 2 | /* |
| 3 | * Samsung's Exynos4210 based Universal C210 board device tree source |
| 4 | * |
| 5 | * Copyright (c) 2014 Samsung Electronics Co., Ltd. |
| 6 | * http://www.samsung.com |
Piotr Wilczek | 3f41ffe | 2014-03-07 14:59:47 +0100 | [diff] [blame] | 7 | */ |
| 8 | |
| 9 | /dts-v1/; |
Simon Glass | dd54739 | 2014-10-20 19:48:30 -0600 | [diff] [blame] | 10 | #include "exynos4210.dtsi" |
Piotr Wilczek | 3f41ffe | 2014-03-07 14:59:47 +0100 | [diff] [blame] | 11 | |
| 12 | / { |
| 13 | model = "Samsung Universal C210 based on Exynos4210 rev0"; |
| 14 | compatible = "samsung,universal_c210", "samsung,exynos4210"; |
| 15 | |
| 16 | aliases { |
| 17 | serial0 = "/serial@13800000"; |
| 18 | console = "/serial@13820000"; |
Piotr Wilczek | 3f41ffe | 2014-03-07 14:59:47 +0100 | [diff] [blame] | 19 | }; |
| 20 | |
Simon Glass | 0043b1f | 2014-10-13 23:42:03 -0600 | [diff] [blame] | 21 | soft-spi { |
Peng Fan | 102412c | 2016-05-03 10:02:21 +0800 | [diff] [blame] | 22 | compatible = "spi-gpio"; |
| 23 | cs-gpios = <&gpy4 3 0>; |
| 24 | gpio-sck = <&gpy3 1 0>; |
| 25 | gpio-mosi = <&gpy3 3 0>; |
| 26 | gpio-miso = <&gpy3 0 0>; |
Simon Glass | 0043b1f | 2014-10-13 23:42:03 -0600 | [diff] [blame] | 27 | spi-delay-us = <1>; |
Simon Glass | 0043b1f | 2014-10-13 23:42:03 -0600 | [diff] [blame] | 28 | cs@0 { |
| 29 | }; |
| 30 | }; |
| 31 | |
Piotr Wilczek | 3f41ffe | 2014-03-07 14:59:47 +0100 | [diff] [blame] | 32 | fimd@11c00000 { |
| 33 | compatible = "samsung,exynos-fimd"; |
| 34 | reg = <0x11c00000 0xa4>; |
| 35 | |
| 36 | samsung,vl-freq = <60>; |
| 37 | samsung,vl-col = <480>; |
| 38 | samsung,vl-row = <800>; |
| 39 | samsung,vl-width = <480>; |
| 40 | samsung,vl-height = <800>; |
| 41 | |
| 42 | samsung,vl-clkp = <0>; |
| 43 | samsung,vl-oep = <0>; |
| 44 | samsung,vl-hsp = <1>; |
| 45 | samsung,vl-vsp = <1>; |
| 46 | samsung,vl-dp = <1>; |
| 47 | samsung,vl-bpix = <4>; |
| 48 | |
| 49 | samsung,vl-hspw = <2>; |
| 50 | samsung,vl-hbpd = <16>; |
| 51 | samsung,vl-hfpd = <16>; |
| 52 | samsung,vl-vspw = <2>; |
| 53 | samsung,vl-vbpd = <8>; |
| 54 | samsung,vl-vfpd = <8>; |
| 55 | samsung,vl-cmd-allow-len = <0xf>; |
| 56 | |
| 57 | samsung,pclk_name = <1>; |
| 58 | samsung,sclk_div = <1>; |
| 59 | |
| 60 | samsung,winid = <0>; |
| 61 | samsung,power-on-delay = <10000>; |
| 62 | samsung,interface-mode = <1>; |
| 63 | samsung,mipi-enabled = <0>; |
| 64 | samsung,dp-enabled; |
| 65 | samsung,dual-lcd-enabled; |
| 66 | |
| 67 | samsung,logo-on = <1>; |
| 68 | samsung,resolution = <0>; |
| 69 | samsung,rgb-mode = <0>; |
| 70 | }; |
| 71 | }; |
Jaehoon Chung | 72331fb | 2017-01-09 14:47:48 +0900 | [diff] [blame] | 72 | |
| 73 | &i2c_5 { |
| 74 | clock-frequency = <100000>; |
| 75 | status = "okay"; |
| 76 | |
| 77 | max8998-pmic@66 { |
| 78 | compatible = "maxim,max8998"; |
| 79 | reg = <0x66 0 0>; |
| 80 | voltage-regulators { |
| 81 | ldo2_reg: LDO2 { |
| 82 | regulator-name = "VALIVE_1.2V"; |
| 83 | regulator-min-microvolt = <1200000>; |
| 84 | regulator-max-microvolt = <1200000>; |
| 85 | regulator-always-on; |
| 86 | }; |
| 87 | |
| 88 | ldo3_reg: LDO3 { |
| 89 | regulator-name = "VUSB+MIPI_1.1V"; |
| 90 | regulator-min-microvolt = <1100000>; |
| 91 | regulator-max-microvolt = <1100000>; |
| 92 | regulator-always-on; |
| 93 | }; |
| 94 | |
| 95 | ldo4_reg: LDO4 { |
| 96 | regulator-name = "VADC_3.3V"; |
| 97 | regulator-min-microvolt = <3300000>; |
| 98 | regulator-max-microvolt = <3300000>; |
| 99 | }; |
| 100 | |
| 101 | ldo5_reg: LDO5 { |
| 102 | regulator-name = "VTF_2.8V"; |
| 103 | regulator-min-microvolt = <2800000>; |
| 104 | regulator-max-microvolt = <2800000>; |
| 105 | }; |
| 106 | |
| 107 | ldo6_reg: LDO6 { |
| 108 | regulator-name = "LDO6"; |
| 109 | regulator-min-microvolt = <2000000>; |
| 110 | regulator-max-microvolt = <2000000>; |
| 111 | }; |
| 112 | |
| 113 | ldo7_reg: LDO7 { |
| 114 | regulator-name = "VLCD+VMIPI_1.8V"; |
| 115 | regulator-min-microvolt = <1800000>; |
| 116 | regulator-max-microvolt = <1800000>; |
| 117 | }; |
| 118 | |
| 119 | ldo8_reg: LDO8 { |
| 120 | regulator-name = "VUSB+VDAC_3.3V"; |
| 121 | regulator-min-microvolt = <3300000>; |
| 122 | regulator-max-microvolt = <3300000>; |
| 123 | regulator-always-on; |
| 124 | }; |
| 125 | |
| 126 | ldo9_reg: LDO9 { |
| 127 | regulator-name = "VCC_2.8V"; |
| 128 | regulator-min-microvolt = <2800000>; |
| 129 | regulator-max-microvolt = <2800000>; |
| 130 | regulator-always-on; |
| 131 | }; |
| 132 | |
| 133 | ldo10_reg: LDO10 { |
| 134 | regulator-name = "VPLL_1.1V"; |
| 135 | regulator-min-microvolt = <1100000>; |
| 136 | regulator-max-microvolt = <1100000>; |
| 137 | regulator-boot-on; |
| 138 | regulator-always-on; |
| 139 | }; |
| 140 | |
| 141 | ldo11_reg: LDO11 { |
| 142 | regulator-name = "CAM_AF_3.3V"; |
| 143 | regulator-min-microvolt = <3300000>; |
| 144 | regulator-max-microvolt = <3300000>; |
| 145 | }; |
| 146 | |
| 147 | ldo12_reg: LDO12 { |
| 148 | regulator-name = "PS_2.8V"; |
| 149 | regulator-min-microvolt = <2800000>; |
| 150 | regulator-max-microvolt = <2800000>; |
| 151 | }; |
| 152 | |
| 153 | ldo13_reg: LDO13 { |
| 154 | regulator-name = "VHIC_1.2V"; |
| 155 | regulator-min-microvolt = <1200000>; |
| 156 | regulator-max-microvolt = <1200000>; |
| 157 | }; |
| 158 | |
| 159 | ldo14_reg: LDO14 { |
| 160 | regulator-name = "CAM_I_HOST_1.8V"; |
| 161 | regulator-min-microvolt = <1800000>; |
| 162 | regulator-max-microvolt = <1800000>; |
| 163 | }; |
| 164 | |
| 165 | ldo15_reg: LDO15 { |
| 166 | regulator-name = "CAM_S_DIG+FM33_CORE_1.2V"; |
| 167 | regulator-min-microvolt = <1200000>; |
| 168 | regulator-max-microvolt = <1200000>; |
| 169 | }; |
| 170 | |
| 171 | ldo16_reg: LDO16 { |
| 172 | regulator-name = "CAM_S_ANA_2.8V"; |
| 173 | regulator-min-microvolt = <2800000>; |
| 174 | regulator-max-microvolt = <2800000>; |
| 175 | }; |
| 176 | |
| 177 | ldo17_reg: LDO17 { |
| 178 | regulator-name = "VCC_3.0V_LCD"; |
| 179 | regulator-min-microvolt = <3000000>; |
| 180 | regulator-max-microvolt = <3000000>; |
| 181 | }; |
| 182 | |
| 183 | buck1_reg: BUCK1 { |
| 184 | regulator-name = "VINT_1.1V"; |
| 185 | regulator-min-microvolt = <750000>; |
| 186 | regulator-max-microvolt = <1500000>; |
| 187 | regulator-boot-on; |
| 188 | regulator-always-on; |
| 189 | }; |
| 190 | |
| 191 | buck2_reg: BUCK2 { |
| 192 | regulator-name = "VG3D_1.1V"; |
| 193 | regulator-min-microvolt = <750000>; |
| 194 | regulator-max-microvolt = <1500000>; |
| 195 | regulator-boot-on; |
| 196 | }; |
| 197 | |
| 198 | buck3_reg: BUCK3 { |
| 199 | regulator-name = "VCC_1.8V"; |
| 200 | regulator-min-microvolt = <1800000>; |
| 201 | regulator-max-microvolt = <1800000>; |
| 202 | regulator-always-on; |
| 203 | }; |
| 204 | |
| 205 | buck4_reg: BUCK4 { |
| 206 | regulator-name = "VMEM_1.2V"; |
| 207 | regulator-min-microvolt = <1200000>; |
| 208 | regulator-max-microvolt = <1200000>; |
| 209 | regulator-always-on; |
| 210 | }; |
| 211 | |
| 212 | ap32khz_reg: EN32KHz-AP { |
| 213 | regulator-name = "32KHz AP"; |
| 214 | regulator-always-on; |
| 215 | }; |
| 216 | |
| 217 | cp32khz_reg: EN32KHz-CP { |
| 218 | regulator-name = "32KHz CP"; |
| 219 | }; |
| 220 | |
| 221 | vichg_reg: ENVICHG { |
| 222 | regulator-name = "VICHG"; |
| 223 | }; |
| 224 | |
| 225 | safeout1_reg: ESAFEOUT1 { |
| 226 | regulator-name = "SAFEOUT1"; |
| 227 | }; |
| 228 | |
| 229 | safeout2_reg: ESAFEOUT2 { |
| 230 | regulator-name = "SAFEOUT2"; |
| 231 | regulator-boot-on; |
| 232 | }; |
| 233 | }; |
| 234 | }; |
| 235 | }; |
Jaehoon Chung | 9c2e2ca | 2017-05-30 10:03:28 +0900 | [diff] [blame] | 236 | |
| 237 | &sdhci0 { |
| 238 | samsung,bus-width = <8>; |
| 239 | samsung,timing = <1 3 3>; |
| 240 | pwr-gpios = <&gpk0 2 0>; |
| 241 | status = "okay"; |
| 242 | }; |
| 243 | |
| 244 | &sdhci2 { |
| 245 | samsung,bus-width = <4>; |
| 246 | samsung,timing = <1 2 3>; |
| 247 | cd-gpios = <&gpx3 4 0>; |
| 248 | status = "okay"; |
| 249 | }; |