blob: dc2f2aeaff07895c999d354bcd294e376d785058 [file] [log] [blame]
Hans de Goede9800cfc2015-04-23 14:27:01 +02001/*
2 * Copyright 2015 Gábor Nyers
3 *
4 * Gábor Nyers <gabor.nyers@gmail.com>
5 *
6 * This file is dual-licensed: you can use it either under the terms
7 * of the GPL or the X11 license, at your option. Note that this dual
8 * licensing only applies to this file, and not this project as a
9 * whole.
10 *
11 * a) This file is free software; you can redistribute it and/or
12 * modify it under the terms of the GNU General Public License as
13 * published by the Free Software Foundation; either version 2 of the
14 * License, or (at your option) any later version.
15 *
16 * This file is distributed in the hope that it will be useful,
17 * but WITHOUT ANY WARRANTY; without even the implied warranty of
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19 * GNU General Public License for more details.
20 *
Hans de Goede9800cfc2015-04-23 14:27:01 +020021 * Or, alternatively,
22 *
23 * b) Permission is hereby granted, free of charge, to any person
24 * obtaining a copy of this software and associated documentation
25 * files (the "Software"), to deal in the Software without
26 * restriction, including without limitation the rights to use,
27 * copy, modify, merge, publish, distribute, sublicense, and/or
28 * sell copies of the Software, and to permit persons to whom the
29 * Software is furnished to do so, subject to the following
30 * conditions:
31 *
32 * The above copyright notice and this permission notice shall be
33 * included in all copies or substantial portions of the Software.
34 *
35 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
36 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
37 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
38 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
39 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
40 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
41 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
42 * OTHER DEALINGS IN THE SOFTWARE.
43 */
44
45/dts-v1/;
46#include "sun4i-a10.dtsi"
47#include "sunxi-common-regulators.dtsi"
48
49#include <dt-bindings/gpio/gpio.h>
50#include <dt-bindings/pinctrl/sun4i-a10.h>
51
52/ {
53 model = "Jesurun Q5";
54 compatible = "jesurun,q5", "allwinner,sun4i-a10";
55
56 aliases {
57 serial0 = &uart0;
58 };
59
60 chosen {
61 stdout-path = "serial0:115200n8";
62 };
63
64 leds {
65 compatible = "gpio-leds";
66 pinctrl-names = "default";
67 pinctrl-0 = <&led_pins_q5>;
68
69 green {
70 label = "q5:green:usr";
71 gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; /* PH20 */
72 };
73
74 };
75
76 reg_emac_3v3: emac-3v3 {
77 compatible = "regulator-fixed";
78 pinctrl-names = "default";
79 pinctrl-0 = <&emac_power_pin_q5>;
80 regulator-name = "emac-3v3";
81 regulator-min-microvolt = <3300000>;
82 regulator-max-microvolt = <3300000>;
83 enable-active-high;
84 gpio = <&pio 7 19 GPIO_ACTIVE_HIGH>; /* PH19 */
85 };
86};
87
88&ahci {
89 status = "okay";
90};
91
92&ehci0 {
93 status = "okay";
94};
95
96&ehci1 {
97 status = "okay";
98};
99
100&emac {
101 pinctrl-names = "default";
102 pinctrl-0 = <&emac_pins_a>;
103 phy = <&phy1>;
104 status = "okay";
105};
106
Hans de Goede8b1ba942015-06-02 15:53:40 +0200107&emac_sram {
108 status = "okay";
109};
110
Hans de Goede9800cfc2015-04-23 14:27:01 +0200111&i2c0 {
112 pinctrl-names = "default";
113 pinctrl-0 = <&i2c0_pins_a>;
114 status = "okay";
115
116 axp209: pmic@34 {
117 compatible = "x-powers,axp209";
118 reg = <0x34>;
119 interrupts = <0>;
120
121 interrupt-controller;
122 #interrupt-cells = <1>;
123 };
124};
125
126&ir0 {
127 pinctrl-names = "default";
Hans de Goede8b1ba942015-06-02 15:53:40 +0200128 pinctrl-0 = <&ir0_rx_pins_a>;
Hans de Goede9800cfc2015-04-23 14:27:01 +0200129 status = "okay";
130};
131
132&mdio {
133 phy-supply = <&reg_emac_3v3>;
134 status = "okay";
135
136 phy1: ethernet-phy@1 {
137 reg = <1>;
138 };
139};
140
141&mmc0 {
142 pinctrl-names = "default";
143 pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
144 vmmc-supply = <&reg_vcc3v3>;
145 bus-width = <4>;
146 cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
147 cd-inverted;
148 status = "okay";
149};
150
151&ohci0 {
152 status = "okay";
153};
154
155&ohci1 {
156 status = "okay";
157};
158
159&pio {
160 emac_power_pin_q5: emac_power_pin@0 {
161 allwinner,pins = "PH19";
162 allwinner,function = "gpio_out";
163 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
164 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
165 };
166
167 led_pins_q5: led_pins@0 {
168 allwinner,pins = "PH20";
169 allwinner,function = "gpio_out";
170 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
171 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
172 };
173};
174
175&reg_usb1_vbus {
176 status = "okay";
177};
178
179&reg_usb2_vbus {
180 status = "okay";
181};
182
183&uart0 {
184 pinctrl-names = "default";
185 pinctrl-0 = <&uart0_pins_a>;
186 status = "okay";
187};
188
189&usbphy {
190 usb1_vbus-supply = <&reg_usb1_vbus>;
191 usb2_vbus-supply = <&reg_usb2_vbus>;
192 status = "okay";
193};