blob: c2b65f8de547ce7ec4e5da00c9157d3775773d08 [file] [log] [blame]
Valentine Barshakf2a21a82019-04-23 23:44:57 +03001// SPDX-License-Identifier: GPL-2.0
2/*
3 * Device Tree Source for the V3M Starter Kit board
4 *
5 * Copyright (C) 2017 Renesas Electronics Corp.
6 * Copyright (C) 2017 Cogent Embedded, Inc.
7 */
8
9/dts-v1/;
10#include "r8a77970.dtsi"
11#include <dt-bindings/gpio/gpio.h>
12
13/ {
14 model = "Renesas V3M Starter Kit board";
15 compatible = "renesas,v3msk", "renesas,r8a77970";
16
17 aliases {
18 i2c0 = &i2c0;
19 i2c1 = &i2c1;
20 i2c2 = &i2c2;
21 i2c3 = &i2c3;
22 i2c4 = &i2c4;
23 serial0 = &scif0;
24 };
25
26 chosen {
27 stdout-path = "serial0:115200n8";
28 };
29
30 hdmi-out {
31 compatible = "hdmi-connector";
32 type = "a";
33
34 port {
35 hdmi_con: endpoint {
36 remote-endpoint = <&adv7511_out>;
37 };
38 };
39 };
40
41 lvds-decoder {
42 compatible = "thine,thc63lvd1024";
43 vcc-supply = <&vcc_d3_3v>;
44
45 ports {
46 #address-cells = <1>;
47 #size-cells = <0>;
48
49 port@0 {
50 reg = <0>;
51 thc63lvd1024_in: endpoint {
52 remote-endpoint = <&lvds0_out>;
53 };
54 };
55
56 port@2 {
57 reg = <2>;
58 thc63lvd1024_out: endpoint {
59 remote-endpoint = <&adv7511_in>;
60 };
61 };
62 };
63 };
64
65 memory@48000000 {
66 device_type = "memory";
67 /* first 128MB is reserved for secure area. */
68 reg = <0x0 0x48000000 0x0 0x78000000>;
69 };
70
71 osc5_clk: osc5-clock {
72 compatible = "fixed-clock";
73 #clock-cells = <0>;
74 clock-frequency = <148500000>;
75 };
76
77 vcc_d1_8v: regulator-0 {
78 compatible = "regulator-fixed";
79 regulator-name = "VCC_D1.8V";
80 regulator-min-microvolt = <1800000>;
81 regulator-max-microvolt = <1800000>;
82 regulator-boot-on;
83 regulator-always-on;
84 };
85
86 vcc_d3_3v: regulator-1 {
87 compatible = "regulator-fixed";
88 regulator-name = "VCC_D3.3V";
89 regulator-min-microvolt = <3300000>;
90 regulator-max-microvolt = <3300000>;
91 regulator-boot-on;
92 regulator-always-on;
93 };
94
95 vcc_vddq_vin0: regulator-2 {
96 compatible = "regulator-fixed";
97 regulator-name = "VCC_VDDQ_VIN0";
98 regulator-min-microvolt = <3300000>;
99 regulator-max-microvolt = <3300000>;
100 regulator-boot-on;
101 regulator-always-on;
102 };
103};
104
105&avb {
106 pinctrl-0 = <&avb_pins>;
107 pinctrl-names = "default";
108
109 renesas,no-ether-link;
110 phy-handle = <&phy0>;
111 rx-internal-delay-ps = <1800>;
112 tx-internal-delay-ps = <2000>;
113 status = "okay";
114
115 phy0: ethernet-phy@0 {
116 compatible = "ethernet-phy-id0022.1622",
117 "ethernet-phy-ieee802.3-c22";
118 rxc-skew-ps = <1500>;
119 reg = <0>;
120 interrupt-parent = <&gpio1>;
121 interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
122 reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
123 };
124};
125
126&du {
127 clocks = <&cpg CPG_MOD 724>,
128 <&osc5_clk>;
129 clock-names = "du.0", "dclkin.0";
130 status = "okay";
131};
132
133&extal_clk {
134 clock-frequency = <16666666>;
135};
136
137&extalr_clk {
138 clock-frequency = <32768>;
139};
140
141&i2c0 {
142 pinctrl-0 = <&i2c0_pins>;
143 pinctrl-names = "default";
144
145 status = "okay";
146 clock-frequency = <400000>;
147
148 hdmi@39{
149 compatible = "adi,adv7511w";
150 #sound-dai-cells = <0>;
151 reg = <0x39>;
152 interrupt-parent = <&gpio1>;
153 interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
154 avdd-supply = <&vcc_d1_8v>;
155 dvdd-supply = <&vcc_d1_8v>;
156 pvdd-supply = <&vcc_d1_8v>;
157 bgvdd-supply = <&vcc_d1_8v>;
158 dvdd-3v-supply = <&vcc_d3_3v>;
159
160 adi,input-depth = <8>;
161 adi,input-colorspace = "rgb";
162 adi,input-clock = "1x";
163
164 ports {
165 #address-cells = <1>;
166 #size-cells = <0>;
167
168 port@0 {
169 reg = <0>;
170 adv7511_in: endpoint {
171 remote-endpoint = <&thc63lvd1024_out>;
172 };
173 };
174
175 port@1 {
176 reg = <1>;
177 adv7511_out: endpoint {
178 remote-endpoint = <&hdmi_con>;
179 };
180 };
181 };
182 };
183};
184
185&lvds0 {
186 status = "okay";
187
188 ports {
189 port@1 {
190 lvds0_out: endpoint {
191 remote-endpoint = <&thc63lvd1024_in>;
192 };
193 };
194 };
195};
196
197&mmc0 {
198 pinctrl-0 = <&mmc_pins>;
199 pinctrl-names = "default";
200
201 vmmc-supply = <&vcc_d3_3v>;
202 vqmmc-supply = <&vcc_vddq_vin0>;
203 bus-width = <8>;
204 non-removable;
205 status = "okay";
206};
207
208&pfc {
209 avb_pins: avb0 {
210 groups = "avb0_mdio", "avb0_rgmii", "avb0_txcrefclk";
211 function = "avb0";
212 };
213
214 i2c0_pins: i2c0 {
215 groups = "i2c0";
216 function = "i2c0";
217 };
218
219 mmc_pins: mmc_3_3v {
220 groups = "mmc_data8", "mmc_ctrl";
221 function = "mmc";
222 power-source = <3300>;
223 };
224
225 qspi0_pins: qspi0 {
226 groups = "qspi0_ctrl", "qspi0_data4";
227 function = "qspi0";
228 };
229
230 scif0_pins: scif0 {
231 groups = "scif0_data";
232 function = "scif0";
233 };
234};
235
236&rpc {
237 pinctrl-0 = <&qspi0_pins>;
238 pinctrl-names = "default";
239
240 status = "okay";
241
242 flash@0 {
243 compatible = "spansion,s25fs512s", "jedec,spi-nor";
244 reg = <0>;
245 spi-max-frequency = <50000000>;
246 spi-rx-bus-width = <4>;
247
248 partitions {
249 compatible = "fixed-partitions";
250 #address-cells = <1>;
251 #size-cells = <1>;
252
253 bootparam@0 {
254 reg = <0x00000000 0x040000>;
255 read-only;
256 };
257 cr7@40000 {
258 reg = <0x00040000 0x080000>;
259 read-only;
260 };
261 cert_header_sa3@c0000 {
262 reg = <0x000c0000 0x080000>;
263 read-only;
264 };
265 bl2@140000 {
266 reg = <0x00140000 0x040000>;
267 read-only;
268 };
269 cert_header_sa6@180000 {
270 reg = <0x00180000 0x040000>;
271 read-only;
272 };
273 bl31@1c0000 {
274 reg = <0x001c0000 0x460000>;
275 read-only;
276 };
277 uboot@640000 {
278 reg = <0x00640000 0x0c0000>;
279 read-only;
280 };
281 uboot-env@700000 {
282 reg = <0x00700000 0x040000>;
283 read-only;
284 };
285 dtb@740000 {
286 reg = <0x00740000 0x080000>;
287 };
288 kernel@7c0000 {
289 reg = <0x007c0000 0x1400000>;
290 };
291 user@1bc0000 {
292 reg = <0x01bc0000 0x2440000>;
293 };
294 };
295 };
296};
297
298&scif0 {
299 pinctrl-0 = <&scif0_pins>;
300 pinctrl-names = "default";
301
302 status = "okay";
303};