blob: c59a3242d6137ab13ab47202b811294b5a1c2bf9 [file] [log] [blame]
Stefanbfacf462011-12-23 06:35:04 +00001/*
2 * Copyright (C) 2011
Stefan Herbrechtsmeier16437a12014-12-28 14:09:50 +01003 * Stefan Herbrechtsmeier <stefan@herbrechtsmeier.net>
Stefanbfacf462011-12-23 06:35:04 +00004 *
5 * Based on Kirkwood support:
6 * (C) Copyright 2009
7 * Marvell Semiconductor <www.marvell.com>
8 * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
9 *
Wolfgang Denk1a459662013-07-08 09:37:19 +020010 * SPDX-License-Identifier: GPL-2.0+
Stefanbfacf462011-12-23 06:35:04 +000011 */
12
13#ifndef _CONFIG_DNS325_H
14#define _CONFIG_DNS325_H
15
16/*
17 * Machine number definition
18 */
19#define MACH_TYPE_DNS325 3800
20#define CONFIG_MACH_TYPE MACH_TYPE_DNS325
21#define CONFIG_IDENT_STRING "\nD-Link DNS-325"
22
23/*
24 * High Level Configuration Options (easy to change)
25 */
26#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */
Stefanbfacf462011-12-23 06:35:04 +000027#define CONFIG_KW88F6281 /* SOC Name */
28#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
29
30/*
31 * Commands configuration
32 */
33#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */
Stefanbfacf462011-12-23 06:35:04 +000034#define CONFIG_CMD_DHCP
35#define CONFIG_CMD_ENV
36#define CONFIG_CMD_NAND
37#define CONFIG_CMD_PING
38#define CONFIG_CMD_USB
39#define CONFIG_CMD_IDE
40#define CONFIG_CMD_DATE
41#define CONFIG_SYS_MVFS
42
43#define CONFIG_NR_DRAM_BANKS 1
44
45/*
46 * mv-common.h should be defined after CMD configs since it used them
47 * to enable certain macros
48 */
49#include "mv-common.h"
50
51/* Remove or override few declarations from mv-common.h */
52#undef CONFIG_SYS_PROMPT
Stefanbfacf462011-12-23 06:35:04 +000053
54/*
55 * Ethernet Driver configuration
56 */
57#ifdef CONFIG_CMD_NET
58#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
59#define CONFIG_NETCONSOLE
60#endif
61
62/*
63 * SATA Driver configuration
64 */
65#ifdef CONFIG_MVSATA_IDE
66#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
67#define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET
68#endif
69
70/*
71 * RTC driver configuration
72 */
73#ifdef CONFIG_CMD_DATE
74#define CONFIG_RTC_MV
75#endif
76
77/*
78 * Enable GPI0 support
79 */
80#define CONFIG_KIRKWOOD_GPIO
81
82/*
83 * Use the HUSH parser
84 */
85#define CONFIG_SYS_HUSH_PARSER
Stefanbfacf462011-12-23 06:35:04 +000086
87/*
88 * Console configuration
89 */
90#define CONFIG_CONSOLE_MUX
91#define CONFIG_SYS_CONSOLE_IS_IN_ENV
92
93/*
94 * Enable device tree support
95 */
96#define CONFIG_OF_LIBFDT
97
98/*
99 * Display cpu info at boot
100 */
101#define CONFIG_DISPLAY_CPUINFO
102
103/*
104 * Environment variables configurations
105 */
106#ifdef CONFIG_CMD_NAND
107#define CONFIG_ENV_IS_IN_NAND
108#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128KB */
109#else
110#define CONFIG_ENV_IS_NOWHERE
111#endif
112
113#define CONFIG_ENV_SIZE 0x20000 /* 128KB */
114#define CONFIG_ENV_ADDR 0xe0000
115#define CONFIG_ENV_OFFSET 0xe0000 /* env starts here */
116
117/*
118 * Default environment variables
119 */
120#define MTDIDS_DEFAULT "nand0=orion_nand"
121
122#define MTDPARTS_DEFAULT "mtdparts=orion_nand:" \
123 "896k(u-boot),128k(u-boot-env),5m(kernel),-(rootfs)\0"
124
125#define CONFIG_EXTRA_ENV_SETTINGS \
126 "stdin=serial\0" \
127 "stdout=serial\0" \
128 "stderr=serial\0" \
129 "loadaddr=0x800000\0" \
130 "autoload=no\0" \
131 "console=ttyS0,115200\0" \
132 "mtdparts="MTDPARTS_DEFAULT \
133 "optargs=\0" \
134 "bootenv=uEnv.txt\0" \
135 "importbootenv=echo Importing environment ...; " \
136 "env import -t ${loadaddr} ${filesize}\0" \
137 "loadbootenv=fatload usb 0 ${loadaddr} ${bootenv}\0" \
138 "setbootargs=setenv bootargs console=${console} " \
139 "${optargs} " \
140 "${mtdparts} " \
141 "root=${bootenvroot} " \
142 "rootfstype=${bootenvrootfstype}\0" \
143 "subbootcmd=run setbootargs; " \
144 "if run bootenvloadimage; then " \
145 "bootm ${loadaddr};" \
146 "fi;\0" \
147 "nandroot=ubi0:rootfs ubi.mtd=rootfs\0" \
148 "nandrootfstype=ubifs\0" \
149 "nandloadimage=nand read ${loadaddr} kernel\0" \
150 "setnandbootenv=echo Booting from nand ...; " \
151 "setenv bootenvroot ${nandroot}; " \
152 "setenv bootenvrootfstype ${nandrootfstype}; " \
153 "setenv bootenvloadimage ${nandloadimage}\0"
154
155#define CONFIG_BOOTCOMMAND \
156 "if test -n ${bootenv} && usb start; then " \
157 "if run loadbootenv; then " \
158 "echo Loaded environment ${bootenv} from usb;" \
159 "run importbootenv;" \
160 "fi;" \
161 "if test -n ${bootenvcmd}; then " \
162 "echo Running bootenvcmd ...;" \
163 "run bootenvcmd;" \
164 "fi;" \
165 "fi;" \
166 "run setnandbootenv subbootcmd;"
167
168#endif /* _CONFIG_DNS325_H */