blob: f51601af89a2f4d5324e891a85944a6d57d2b074 [file] [log] [blame]
Tom Rini83d290c2018-05-06 17:58:06 -04001// SPDX-License-Identifier: GPL-2.0
Marek Vasut92aa0992018-01-07 20:18:11 +01002/*
3 * Device Tree Source for the Gose board
4 *
5 * Copyright (C) 2014-2015 Renesas Electronics Corporation
Marek Vasut92aa0992018-01-07 20:18:11 +01006 */
7
8/*
9 * SSI-AK4643
10 *
11 * SW1: 1: AK4643
12 * 2: CN22
13 * 3: ADV7511
14 *
15 * This command is required when Playback/Capture
16 *
17 * amixer set "LINEOUT Mixer DACL" on
18 * amixer set "DVC Out" 100%
19 * amixer set "DVC In" 100%
20 *
21 * You can use Mute
22 *
23 * amixer set "DVC Out Mute" on
24 * amixer set "DVC In Mute" on
25 *
26 * You can use Volume Ramp
27 *
28 * amixer set "DVC Out Ramp Up Rate" "0.125 dB/64 steps"
29 * amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
30 * amixer set "DVC Out Ramp" on
31 * aplay xxx.wav &
32 * amixer set "DVC Out" 80% // Volume Down
33 * amixer set "DVC Out" 100% // Volume Up
34 */
35
36/dts-v1/;
37#include "r8a7793.dtsi"
38#include <dt-bindings/gpio/gpio.h>
39#include <dt-bindings/input/input.h>
40
41/ {
42 model = "Gose";
43 compatible = "renesas,gose", "renesas,r8a7793";
44
45 aliases {
46 serial0 = &scif0;
47 serial1 = &scif1;
Marek Vasut252c8b42018-06-06 19:58:17 +020048 i2c9 = &gpioi2c2;
49 i2c10 = &gpioi2c4;
50 i2c11 = &i2chdmi;
51 i2c12 = &i2cexio4;
Marek Vasut92aa0992018-01-07 20:18:11 +010052 };
53
54 chosen {
55 bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
56 stdout-path = "serial0:115200n8";
57 };
58
59 memory@40000000 {
60 device_type = "memory";
61 reg = <0 0x40000000 0 0x40000000>;
62 };
63
64 gpio-keys {
65 compatible = "gpio-keys";
66
67 key-1 {
68 gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
69 linux,code = <KEY_1>;
70 label = "SW2-1";
71 wakeup-source;
72 debounce-interval = <20>;
73 };
74 key-2 {
75 gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
76 linux,code = <KEY_2>;
77 label = "SW2-2";
78 wakeup-source;
79 debounce-interval = <20>;
80 };
81 key-3 {
82 gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
83 linux,code = <KEY_3>;
84 label = "SW2-3";
85 wakeup-source;
86 debounce-interval = <20>;
87 };
88 key-4 {
89 gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
90 linux,code = <KEY_4>;
91 label = "SW2-4";
92 wakeup-source;
93 debounce-interval = <20>;
94 };
95 key-a {
96 gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
97 linux,code = <KEY_A>;
98 label = "SW30";
99 wakeup-source;
100 debounce-interval = <20>;
101 };
102 key-b {
103 gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
104 linux,code = <KEY_B>;
105 label = "SW31";
106 wakeup-source;
107 debounce-interval = <20>;
108 };
109 key-c {
110 gpios = <&gpio7 2 GPIO_ACTIVE_LOW>;
111 linux,code = <KEY_C>;
112 label = "SW32";
113 wakeup-source;
114 debounce-interval = <20>;
115 };
116 key-d {
117 gpios = <&gpio7 3 GPIO_ACTIVE_LOW>;
118 linux,code = <KEY_D>;
119 label = "SW33";
120 wakeup-source;
121 debounce-interval = <20>;
122 };
123 key-e {
124 gpios = <&gpio7 4 GPIO_ACTIVE_LOW>;
125 linux,code = <KEY_E>;
126 label = "SW34";
127 wakeup-source;
128 debounce-interval = <20>;
129 };
130 key-f {
131 gpios = <&gpio7 5 GPIO_ACTIVE_LOW>;
132 linux,code = <KEY_F>;
133 label = "SW35";
134 wakeup-source;
135 debounce-interval = <20>;
136 };
137 key-g {
138 gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
139 linux,code = <KEY_G>;
140 label = "SW36";
141 wakeup-source;
142 debounce-interval = <20>;
143 };
144 };
145
146 leds {
147 compatible = "gpio-leds";
148 led6 {
149 gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
150 label = "LED6";
151 };
152 led7 {
153 gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
154 label = "LED7";
155 };
156 led8 {
157 gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
158 label = "LED8";
159 };
160 };
161
162 vcc_sdhi0: regulator-vcc-sdhi0 {
163 compatible = "regulator-fixed";
164
165 regulator-name = "SDHI0 Vcc";
166 regulator-min-microvolt = <3300000>;
167 regulator-max-microvolt = <3300000>;
168
169 gpio = <&gpio7 17 GPIO_ACTIVE_HIGH>;
170 enable-active-high;
171 };
172
173 vccq_sdhi0: regulator-vccq-sdhi0 {
174 compatible = "regulator-gpio";
175
176 regulator-name = "SDHI0 VccQ";
177 regulator-min-microvolt = <1800000>;
178 regulator-max-microvolt = <3300000>;
179
180 gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
181 gpios-states = <1>;
182 states = <3300000 1
183 1800000 0>;
184 };
185
186 vcc_sdhi1: regulator-vcc-sdhi1 {
187 compatible = "regulator-fixed";
188
189 regulator-name = "SDHI1 Vcc";
190 regulator-min-microvolt = <3300000>;
191 regulator-max-microvolt = <3300000>;
192
193 gpio = <&gpio7 18 GPIO_ACTIVE_HIGH>;
194 enable-active-high;
195 };
196
197 vccq_sdhi1: regulator-vccq-sdhi1 {
198 compatible = "regulator-gpio";
199
200 regulator-name = "SDHI1 VccQ";
201 regulator-min-microvolt = <1800000>;
202 regulator-max-microvolt = <3300000>;
203
204 gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>;
205 gpios-states = <1>;
206 states = <3300000 1
207 1800000 0>;
208 };
209
210 vcc_sdhi2: regulator-vcc-sdhi2 {
211 compatible = "regulator-fixed";
212
213 regulator-name = "SDHI2 Vcc";
214 regulator-min-microvolt = <3300000>;
215 regulator-max-microvolt = <3300000>;
216
217 gpio = <&gpio7 19 GPIO_ACTIVE_HIGH>;
218 enable-active-high;
219 };
220
221 vccq_sdhi2: regulator-vccq-sdhi2 {
222 compatible = "regulator-gpio";
223
224 regulator-name = "SDHI2 VccQ";
225 regulator-min-microvolt = <1800000>;
226 regulator-max-microvolt = <3300000>;
227
228 gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
229 gpios-states = <1>;
230 states = <3300000 1
231 1800000 0>;
232 };
233
234 audio_clock: audio_clock {
235 compatible = "fixed-clock";
236 #clock-cells = <0>;
237 clock-frequency = <11289600>;
238 };
239
240 rsnd_ak4643: sound {
241 compatible = "simple-audio-card";
242
243 simple-audio-card,format = "left_j";
244 simple-audio-card,bitclock-master = <&sndcodec>;
245 simple-audio-card,frame-master = <&sndcodec>;
246
247 sndcpu: simple-audio-card,cpu {
248 sound-dai = <&rcar_sound>;
249 };
250
251 sndcodec: simple-audio-card,codec {
252 sound-dai = <&ak4643>;
253 clocks = <&audio_clock>;
254 };
255 };
256
257 hdmi-in {
258 compatible = "hdmi-connector";
259 type = "a";
260
261 port {
262 hdmi_con_in: endpoint {
263 remote-endpoint = <&adv7612_in>;
264 };
265 };
266 };
267
268 hdmi-out {
269 compatible = "hdmi-connector";
270 type = "a";
271
272 port {
273 hdmi_con_out: endpoint {
274 remote-endpoint = <&adv7511_out>;
275 };
276 };
277 };
278
279 composite-in {
280 compatible = "composite-video-connector";
281
282 port {
283 composite_con_in: endpoint {
284 remote-endpoint = <&adv7180_in>;
285 };
286 };
287 };
288
289 x2_clk: x2-clock {
290 compatible = "fixed-clock";
291 #clock-cells = <0>;
292 clock-frequency = <74250000>;
293 };
294
295 x13_clk: x13-clock {
296 compatible = "fixed-clock";
297 #clock-cells = <0>;
298 clock-frequency = <148500000>;
299 };
Marek Vasut252c8b42018-06-06 19:58:17 +0200300
301 gpioi2c2: i2c-9 {
302 #address-cells = <1>;
303 #size-cells = <0>;
304 compatible = "i2c-gpio";
305 status = "disabled";
306 scl-gpios = <&gpio2 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
307 sda-gpios = <&gpio2 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
308 i2c-gpio,delay-us = <5>;
309 };
310
311 gpioi2c4: i2c-10 {
312 #address-cells = <1>;
313 #size-cells = <0>;
314 compatible = "i2c-gpio";
315 status = "disabled";
316 scl-gpios = <&gpio7 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
317 sda-gpios = <&gpio7 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
318 i2c-gpio,delay-us = <5>;
319 };
320
321 /*
322 * A fallback to GPIO is provided for I2C2.
323 */
324 i2chdmi: i2c-11 {
325 compatible = "i2c-demux-pinctrl";
326 i2c-parent = <&i2c2>, <&gpioi2c2>;
327 i2c-bus-name = "i2c-hdmi";
328 #address-cells = <1>;
329 #size-cells = <0>;
330
331 ak4643: codec@12 {
332 compatible = "asahi-kasei,ak4643";
333 #sound-dai-cells = <0>;
334 reg = <0x12>;
335 };
336
337 composite-in@20 {
338 compatible = "adi,adv7180cp";
339 reg = <0x20>;
340 remote = <&vin1>;
341
342 port {
343 #address-cells = <1>;
344 #size-cells = <0>;
345
346 port@0 {
347 reg = <0>;
348 adv7180_in: endpoint {
349 remote-endpoint = <&composite_con_in>;
350 };
351 };
352
353 port@3 {
354 reg = <3>;
355 adv7180_out: endpoint {
356 bus-width = <8>;
357 remote-endpoint = <&vin1ep>;
358 };
359 };
360 };
361 };
362
363 hdmi@39 {
364 compatible = "adi,adv7511w";
365 reg = <0x39>;
366 interrupt-parent = <&gpio3>;
367 interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
368
369 adi,input-depth = <8>;
370 adi,input-colorspace = "rgb";
371 adi,input-clock = "1x";
372 adi,input-style = <1>;
373 adi,input-justification = "evenly";
374
375 ports {
376 #address-cells = <1>;
377 #size-cells = <0>;
378
379 port@0 {
380 reg = <0>;
381 adv7511_in: endpoint {
382 remote-endpoint = <&du_out_rgb>;
383 };
384 };
385
386 port@1 {
387 reg = <1>;
388 adv7511_out: endpoint {
389 remote-endpoint = <&hdmi_con_out>;
390 };
391 };
392 };
393 };
394
395 hdmi-in@4c {
396 compatible = "adi,adv7612";
397 reg = <0x4c>;
398 interrupt-parent = <&gpio4>;
399 interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
400 default-input = <0>;
401
402 port {
403 #address-cells = <1>;
404 #size-cells = <0>;
405
406 port@0 {
407 reg = <0>;
408 adv7612_in: endpoint {
409 remote-endpoint = <&hdmi_con_in>;
410 };
411 };
412
413 port@2 {
414 reg = <2>;
415 adv7612_out: endpoint {
416 remote-endpoint = <&vin0ep2>;
417 };
418 };
419 };
420 };
421
422 eeprom@50 {
423 compatible = "renesas,r1ex24002", "atmel,24c02";
424 reg = <0x50>;
425 pagesize = <16>;
426 };
427 };
428
429 /*
430 * I2C4 is routed to EXIO connector E, pins 37 (SCL) + 39 (SDA).
431 * A fallback to GPIO is provided.
432 */
433 i2cexio4: i2c-12 {
434 compatible = "i2c-demux-pinctrl";
435 i2c-parent = <&i2c4>, <&gpioi2c4>;
436 i2c-bus-name = "i2c-exio4";
437 #address-cells = <1>;
438 #size-cells = <0>;
439 };
Marek Vasut92aa0992018-01-07 20:18:11 +0100440};
441
442&du {
443 pinctrl-0 = <&du_pins>;
444 pinctrl-names = "default";
445 status = "okay";
446
Marek Vasut252c8b42018-06-06 19:58:17 +0200447 clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
Marek Vasut92aa0992018-01-07 20:18:11 +0100448 <&x13_clk>, <&x2_clk>;
Marek Vasut252c8b42018-06-06 19:58:17 +0200449 clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";
Marek Vasut92aa0992018-01-07 20:18:11 +0100450
451 ports {
452 port@0 {
453 endpoint {
454 remote-endpoint = <&adv7511_in>;
455 };
456 };
Marek Vasut252c8b42018-06-06 19:58:17 +0200457 };
458};
459
460&lvds0 {
461 ports {
Marek Vasut92aa0992018-01-07 20:18:11 +0100462 port@1 {
463 lvds_connector: endpoint {
464 };
465 };
466 };
467};
468
469&extal_clk {
470 clock-frequency = <20000000>;
471};
472
473&pfc {
474 pinctrl-0 = <&scif_clk_pins>;
475 pinctrl-names = "default";
476
477 i2c2_pins: i2c2 {
478 groups = "i2c2";
479 function = "i2c2";
480 };
481
Marek Vasut252c8b42018-06-06 19:58:17 +0200482 i2c4_pins: i2c4 {
483 groups = "i2c4_c";
484 function = "i2c4";
485 };
486
Marek Vasut92aa0992018-01-07 20:18:11 +0100487 du_pins: du {
488 groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
489 function = "du";
490 };
491
492 scif0_pins: scif0 {
493 groups = "scif0_data_d";
494 function = "scif0";
495 };
496
497 scif1_pins: scif1 {
498 groups = "scif1_data_d";
499 function = "scif1";
500 };
501
502 scif_clk_pins: scif_clk {
503 groups = "scif_clk";
504 function = "scif_clk";
505 };
506
507 ether_pins: ether {
508 groups = "eth_link", "eth_mdio", "eth_rmii";
509 function = "eth";
510 };
511
512 phy1_pins: phy1 {
513 groups = "intc_irq0";
514 function = "intc";
515 };
516
517 sdhi0_pins: sd0 {
518 groups = "sdhi0_data4", "sdhi0_ctrl";
519 function = "sdhi0";
520 power-source = <3300>;
521 };
522
523 sdhi0_pins_uhs: sd0_uhs {
524 groups = "sdhi0_data4", "sdhi0_ctrl";
525 function = "sdhi0";
526 power-source = <1800>;
527 };
528
529 sdhi1_pins: sd1 {
530 groups = "sdhi1_data4", "sdhi1_ctrl";
531 function = "sdhi1";
532 power-source = <3300>;
533 };
534
535 sdhi1_pins_uhs: sd1_uhs {
536 groups = "sdhi1_data4", "sdhi1_ctrl";
537 function = "sdhi1";
538 power-source = <1800>;
539 };
540
541 sdhi2_pins: sd2 {
542 groups = "sdhi2_data4", "sdhi2_ctrl";
543 function = "sdhi2";
544 power-source = <3300>;
545 };
546
547 sdhi2_pins_uhs: sd2_uhs {
548 groups = "sdhi2_data4", "sdhi2_ctrl";
549 function = "sdhi2";
550 power-source = <1800>;
551 };
552
553 qspi_pins: qspi {
554 groups = "qspi_ctrl", "qspi_data4";
555 function = "qspi";
556 };
557
558 sound_pins: sound {
559 groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
560 function = "ssi";
561 };
562
563 sound_clk_pins: sound_clk {
564 groups = "audio_clk_a";
565 function = "audio_clk";
566 };
567
568 vin0_pins: vin0 {
569 groups = "vin0_data24", "vin0_sync", "vin0_clkenb", "vin0_clk";
570 function = "vin0";
571 };
572
573 vin1_pins: vin1 {
574 groups = "vin1_data8", "vin1_clk";
575 function = "vin1";
576 };
577};
578
579&ether {
580 pinctrl-0 = <&ether_pins &phy1_pins>;
581 pinctrl-names = "default";
582
583 phy-handle = <&phy1>;
584 renesas,ether-link-active-low;
585 status = "okay";
586
587 phy1: ethernet-phy@1 {
588 reg = <1>;
589 interrupt-parent = <&irqc0>;
590 interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
591 micrel,led-mode = <1>;
592 };
593};
594
595&cmt0 {
596 status = "okay";
597};
598
Marek Vasut3abd8002019-03-04 22:50:54 +0100599&cpu0 {
600 cpu0-supply = <&vdd_dvfs>;
601};
602
Marek Vasut3b255532018-12-03 21:39:48 +0100603&rwdt {
604 timeout-sec = <60>;
605 status = "okay";
606};
607
Marek Vasut92aa0992018-01-07 20:18:11 +0100608&scif0 {
609 pinctrl-0 = <&scif0_pins>;
610 pinctrl-names = "default";
611
612 status = "okay";
613};
614
615&scif1 {
616 pinctrl-0 = <&scif1_pins>;
617 pinctrl-names = "default";
618
619 status = "okay";
620};
621
622&scif_clk {
623 clock-frequency = <14745600>;
624};
625
626&sdhi0 {
627 pinctrl-0 = <&sdhi0_pins>;
628 pinctrl-1 = <&sdhi0_pins_uhs>;
629 pinctrl-names = "default", "state_uhs";
630
631 vmmc-supply = <&vcc_sdhi0>;
632 vqmmc-supply = <&vccq_sdhi0>;
633 cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>;
634 wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
635 sd-uhs-sdr50;
636 sd-uhs-sdr104;
637 status = "okay";
638};
639
640&sdhi1 {
641 pinctrl-0 = <&sdhi1_pins>;
642 pinctrl-1 = <&sdhi1_pins_uhs>;
643 pinctrl-names = "default", "state_uhs";
644
645 vmmc-supply = <&vcc_sdhi1>;
646 vqmmc-supply = <&vccq_sdhi1>;
647 cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
648 wp-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
649 sd-uhs-sdr50;
650 status = "okay";
651};
652
653&sdhi2 {
654 pinctrl-0 = <&sdhi2_pins>;
655 pinctrl-1 = <&sdhi2_pins_uhs>;
656 pinctrl-names = "default", "state_uhs";
657
658 vmmc-supply = <&vcc_sdhi2>;
659 vqmmc-supply = <&vccq_sdhi2>;
660 cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>;
661 sd-uhs-sdr50;
662 status = "okay";
663};
664
665&qspi {
666 pinctrl-0 = <&qspi_pins>;
667 pinctrl-names = "default";
668
669 status = "okay";
670
671 flash@0 {
672 compatible = "spansion,s25fl512s", "jedec,spi-nor";
673 reg = <0>;
674 spi-max-frequency = <30000000>;
675 spi-tx-bus-width = <4>;
676 spi-rx-bus-width = <4>;
677 spi-cpol;
678 spi-cpha;
679 m25p,fast-read;
680
681 partitions {
682 compatible = "fixed-partitions";
683 #address-cells = <1>;
684 #size-cells = <1>;
685
686 partition@0 {
687 label = "loader";
688 reg = <0x00000000 0x00040000>;
689 read-only;
690 };
691 partition@40000 {
692 label = "user";
693 reg = <0x00040000 0x00400000>;
694 read-only;
695 };
696 partition@440000 {
697 label = "flash";
698 reg = <0x00440000 0x03bc0000>;
699 };
700 };
701 };
702};
703
704&i2c2 {
705 pinctrl-0 = <&i2c2_pins>;
Marek Vasut252c8b42018-06-06 19:58:17 +0200706 pinctrl-names = "i2c-hdmi";
Marek Vasut92aa0992018-01-07 20:18:11 +0100707
708 status = "okay";
709 clock-frequency = <100000>;
710
Marek Vasut92aa0992018-01-07 20:18:11 +0100711};
712
713&i2c6 {
714 status = "okay";
715 clock-frequency = <100000>;
716
717 pmic@58 {
718 compatible = "dlg,da9063";
719 reg = <0x58>;
720 interrupt-parent = <&irqc0>;
721 interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
722 interrupt-controller;
723
724 rtc {
725 compatible = "dlg,da9063-rtc";
726 };
727
728 wdt {
729 compatible = "dlg,da9063-watchdog";
730 };
731 };
Marek Vasut3abd8002019-03-04 22:50:54 +0100732
733 vdd_dvfs: regulator@68 {
734 compatible = "dlg,da9210";
735 reg = <0x68>;
736 interrupt-parent = <&irqc0>;
737 interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
738
739 regulator-min-microvolt = <1000000>;
740 regulator-max-microvolt = <1000000>;
741 regulator-boot-on;
742 regulator-always-on;
743 };
Marek Vasut92aa0992018-01-07 20:18:11 +0100744};
745
Marek Vasut252c8b42018-06-06 19:58:17 +0200746&i2c4 {
747 pinctrl-0 = <&i2c4_pins>;
748 pinctrl-names = "i2c-exio4";
749};
750
Marek Vasut92aa0992018-01-07 20:18:11 +0100751&rcar_sound {
752 pinctrl-0 = <&sound_pins &sound_clk_pins>;
753 pinctrl-names = "default";
754
755 /* Single DAI */
756 #sound-dai-cells = <0>;
757
758 status = "okay";
759
760 rcar_sound,dai {
761 dai0 {
762 playback = <&ssi0 &src2 &dvc0>;
763 capture = <&ssi1 &src3 &dvc1>;
764 };
765 };
766};
767
768&ssi1 {
769 shared-pin;
770};
771
772/* HDMI video input */
773&vin0 {
774 status = "okay";
775 pinctrl-0 = <&vin0_pins>;
776 pinctrl-names = "default";
777
778 port {
Marek Vasut92aa0992018-01-07 20:18:11 +0100779 vin0ep2: endpoint {
780 remote-endpoint = <&adv7612_out>;
781 bus-width = <24>;
782 hsync-active = <0>;
783 vsync-active = <0>;
784 pclk-sample = <1>;
785 data-active = <1>;
786 };
787 };
788};
789
790/* composite video input */
791&vin1 {
792 pinctrl-0 = <&vin1_pins>;
793 pinctrl-names = "default";
794
795 status = "okay";
796
797 port {
Marek Vasut92aa0992018-01-07 20:18:11 +0100798 vin1ep: endpoint {
799 remote-endpoint = <&adv7180_out>;
800 bus-width = <8>;
801 };
802 };
803};