blob: 4446510df4e0454283848e4640c8ab2c08aef959 [file] [log] [blame]
Chris Packham0e316662019-01-10 21:01:00 +13001/* SPDX-License-Identifier: GPL-2.0+ */
2/*
3 * Copyright (C) 2018 Allied Telesis Labs
4 */
5
6#ifndef _CONFIG_X530_H
7#define _CONFIG_X530_H
8
9/*
10 * High Level Configuration Options (easy to change)
11 */
12
13#define CONFIG_DISPLAY_BOARDINFO_LATE
14
15#define CONFIG_SYS_TCLK 250000000 /* 250MHz */
16
17/*
18 * NS16550 Configuration
19 */
20#define CONFIG_SYS_NS16550_SERIAL
21#define CONFIG_SYS_NS16550_CLK CONFIG_SYS_TCLK
22#if !defined(CONFIG_DM_SERIAL)
23#define CONFIG_SYS_NS16550_REG_SIZE (-4)
24#define CONFIG_SYS_NS16550_COM1 MV_UART_CONSOLE_BASE
25#endif
26
27/*
28 * Serial Port configuration
29 * The following definitions let you select what serial you want to use
30 * for your console driver.
31 */
32
Chris Packham0e316662019-01-10 21:01:00 +130033/* NAND */
34#define CONFIG_SYS_NAND_ONFI_DETECTION
Chris Packham0e316662019-01-10 21:01:00 +130035#define CONFIG_SYS_MAX_NAND_DEVICE 1
36
37#define BBT_CUSTOM_SCAN
38#define BBT_CUSTOM_SCAN_PAGE 0
39#define BBT_CUSTOM_SCAN_POSITION 2048
40
41/* SPI NOR flash default params, used by sf commands */
Chris Packham0e316662019-01-10 21:01:00 +130042
43#define MTDIDS_DEFAULT "nand0=nand"
44#define MTDPARTS_DEFAULT "mtdparts=nand:240M(user),8M(errlog),8M(nand-bbt)"
45#define MTDPARTS_MTDOOPS "errlog"
46
47/* Partition support */
48
49/* Additional FS support/configuration */
50
51/* USB/EHCI configuration */
52#define CONFIG_EHCI_IS_TDI
53
54/* Environment in SPI NOR flash */
Chris Packham0e316662019-01-10 21:01:00 +130055
Chris Packham0e316662019-01-10 21:01:00 +130056#define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */
57
58/* PCIe support */
59#ifndef CONFIG_SPL_BUILD
Chris Packham0e316662019-01-10 21:01:00 +130060#define CONFIG_PCI_SCAN_SHOW
61#endif
62
63/* NAND */
Chris Packham0e316662019-01-10 21:01:00 +130064#define CONFIG_SYS_NAND_ONFI_DETECTION
Chris Packham0e316662019-01-10 21:01:00 +130065
66#define CONFIG_SYS_MALLOC_LEN (4 << 20)
67
68#include <asm/arch/config.h>
69
70/*
71 * Other required minimal configurations
72 */
Chris Packham0e316662019-01-10 21:01:00 +130073#define CONFIG_SYS_RESET_ADDRESS 0xffff0000 /* Rst Vector Adr */
74
Chris Packham0e316662019-01-10 21:01:00 +130075/* Keep device tree and initrd in low memory so the kernel can access them */
76#define CONFIG_EXTRA_ENV_SETTINGS \
77 "fdt_high=0x10000000\0" \
78 "initrd_high=0x10000000\0"
79
80#define CONFIG_SYS_LOAD_ADDR 0x1000000
81#define CONFIG_UBI_PART user
82#define CONFIG_UBIFS_VOLUME user
83
84/* SPL */
85
86/* Defines for SPL */
87#define CONFIG_SPL_SIZE (140 << 10)
Chris Packham0e316662019-01-10 21:01:00 +130088#define CONFIG_SPL_MAX_SIZE (CONFIG_SPL_SIZE - 0x0030)
89
90#define CONFIG_SPL_BSS_START_ADDR (0x40000000 + CONFIG_SPL_SIZE)
91#define CONFIG_SPL_BSS_MAX_SIZE (16 << 10)
92
93#ifdef CONFIG_SPL_BUILD
94#define CONFIG_SYS_MALLOC_SIMPLE
95#endif
96
97#define CONFIG_SPL_STACK (0x40000000 + ((192 - 16) << 10))
98#define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4)
99
100/* SPL related SPI defines */
Chris Packham0e316662019-01-10 21:01:00 +1300101#define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_SPI_U_BOOT_OFFS
102
103#endif /* _CONFIG_X530_H */