Stefan Roese | 3cb86f3 | 2007-03-24 15:45:34 +0100 | [diff] [blame] | 1 | /* |
| 2 | * (C) Copyright 2007 |
| 3 | * Stefan Roese, DENX Software Engineering, sr@denx.de. |
| 4 | * |
| 5 | * See file CREDITS for list of people who contributed to this |
| 6 | * project. |
| 7 | * |
| 8 | * This program is free software; you can redistribute it and/or |
| 9 | * modify it under the terms of the GNU General Public License as |
| 10 | * published by the Free Software Foundation; either version 2 of |
| 11 | * the License, or (at your option) any later version. |
| 12 | * |
| 13 | * This program is distributed in the hope that it will be useful, |
| 14 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 15 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 16 | * GNU General Public License for more details. |
| 17 | * |
| 18 | * You should have received a copy of the GNU General Public License |
| 19 | * along with this program; if not, write to the Free Software |
| 20 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| 21 | * MA 02111-1307 USA |
| 22 | */ |
| 23 | |
| 24 | #include <common.h> |
| 25 | #include <asm/processor.h> |
| 26 | #include <asm/io.h> |
| 27 | #include <asm/gpio.h> |
| 28 | |
| 29 | #if defined(CFG_440_GPIO_TABLE) |
| 30 | gpio_param_s gpio_tab[GPIO_GROUP_MAX][GPIO_MAX] = CFG_440_GPIO_TABLE; |
| 31 | #endif |
| 32 | |
| 33 | #if defined(GPIO0_OSRL) |
| 34 | /* Only some 4xx variants support alternate funtions on the GPIO's */ |
| 35 | void gpio_config(int pin, int in_out, int gpio_alt, int out_val) |
| 36 | { |
| 37 | u32 mask; |
| 38 | u32 mask2; |
| 39 | u32 val; |
| 40 | u32 offs = 0; |
| 41 | u32 offs2 = 0; |
| 42 | int pin2 = pin << 1; |
| 43 | |
| 44 | if (pin >= GPIO_MAX) { |
| 45 | offs = 0x100; |
| 46 | pin -= GPIO_MAX; |
| 47 | } |
| 48 | |
| 49 | if (pin >= GPIO_MAX/2) { |
| 50 | offs2 = 0x100; |
| 51 | pin2 = (pin - GPIO_MAX/2) << 1; |
| 52 | } |
| 53 | |
| 54 | mask = 0x80000000 >> pin; |
| 55 | mask2 = 0xc0000000 >> (pin2 << 1); |
| 56 | |
| 57 | /* first set TCR to 0 */ |
| 58 | out32(GPIO0_TCR + offs, in32(GPIO0_TCR + offs) & ~mask); |
| 59 | |
| 60 | if (in_out == GPIO_OUT) { |
| 61 | val = in32(GPIO0_OSRL + offs + offs2) & ~mask2; |
| 62 | switch (gpio_alt) { |
| 63 | case GPIO_ALT1: |
| 64 | val |= GPIO_ALT1_SEL >> pin2; |
| 65 | break; |
| 66 | case GPIO_ALT2: |
| 67 | val |= GPIO_ALT2_SEL >> pin2; |
| 68 | break; |
| 69 | case GPIO_ALT3: |
| 70 | val |= GPIO_ALT3_SEL >> pin2; |
| 71 | break; |
| 72 | } |
| 73 | out32(GPIO0_OSRL + offs + offs2, val); |
| 74 | |
| 75 | /* setup requested output value */ |
| 76 | if (out_val == GPIO_OUT_0) |
| 77 | out32(GPIO0_OR + offs, in32(GPIO0_OR + offs) & ~mask); |
| 78 | else if (out_val == GPIO_OUT_1) |
| 79 | out32(GPIO0_OR + offs, in32(GPIO0_OR + offs) | mask); |
| 80 | |
| 81 | /* now configure TCR to drive output if selected */ |
| 82 | out32(GPIO0_TCR + offs, in32(GPIO0_TCR + offs) | mask); |
| 83 | } else { |
| 84 | val = in32(GPIO0_ISR1L + offs + offs2) & ~mask2; |
| 85 | val |= GPIO_IN_SEL >> pin2; |
| 86 | out32(GPIO0_ISR1L + offs + offs2, val); |
| 87 | } |
| 88 | } |
| 89 | #endif /* GPIO_OSRL */ |
| 90 | |
| 91 | void gpio_write_bit(int pin, int val) |
| 92 | { |
| 93 | u32 offs = 0; |
| 94 | |
| 95 | if (pin >= GPIO_MAX) { |
| 96 | offs = 0x100; |
| 97 | pin -= GPIO_MAX; |
| 98 | } |
| 99 | |
| 100 | if (val) |
| 101 | out32(GPIO0_OR + offs, in32(GPIO0_OR + offs) | GPIO_VAL(pin)); |
| 102 | else |
| 103 | out32(GPIO0_OR + offs, in32(GPIO0_OR + offs) & ~GPIO_VAL(pin)); |
| 104 | } |
| 105 | |
Stefan Roese | 85f7373 | 2007-06-15 07:39:43 +0200 | [diff] [blame] | 106 | int gpio_read_out_bit(int pin) |
| 107 | { |
| 108 | u32 offs = 0; |
| 109 | |
| 110 | if (pin >= GPIO_MAX) { |
| 111 | offs = 0x100; |
| 112 | pin -= GPIO_MAX; |
| 113 | } |
| 114 | |
| 115 | return (in32(GPIO0_OR + offs) & GPIO_VAL(pin) ? 1 : 0); |
| 116 | } |
| 117 | |
Stefan Roese | 3cb86f3 | 2007-03-24 15:45:34 +0100 | [diff] [blame] | 118 | #if defined(CFG_440_GPIO_TABLE) |
| 119 | void gpio_set_chip_configuration(void) |
| 120 | { |
| 121 | unsigned char i=0, j=0, offs=0, gpio_core; |
| 122 | unsigned long reg, core_add; |
| 123 | |
| 124 | for (gpio_core=0; gpio_core<GPIO_GROUP_MAX; gpio_core++) { |
| 125 | j = 0; |
| 126 | offs = 0; |
| 127 | /* GPIO config of the GPIOs 0 to 31 */ |
| 128 | for (i=0; i<GPIO_MAX; i++, j++) { |
| 129 | if (i == GPIO_MAX/2) { |
| 130 | offs = 4; |
| 131 | j = i-16; |
| 132 | } |
| 133 | |
| 134 | core_add = gpio_tab[gpio_core][i].add; |
| 135 | |
| 136 | if ((gpio_tab[gpio_core][i].in_out == GPIO_IN) || |
| 137 | (gpio_tab[gpio_core][i].in_out == GPIO_BI)) { |
| 138 | |
| 139 | switch (gpio_tab[gpio_core][i].alt_nb) { |
| 140 | case GPIO_SEL: |
| 141 | break; |
| 142 | |
| 143 | case GPIO_ALT1: |
| 144 | reg = in32(GPIO_IS1(core_add+offs)) |
| 145 | & ~(GPIO_MASK >> (j*2)); |
| 146 | reg = reg | (GPIO_IN_SEL >> (j*2)); |
| 147 | out32(GPIO_IS1(core_add+offs), reg); |
| 148 | break; |
| 149 | |
| 150 | case GPIO_ALT2: |
| 151 | reg = in32(GPIO_IS2(core_add+offs)) |
| 152 | & ~(GPIO_MASK >> (j*2)); |
| 153 | reg = reg | (GPIO_IN_SEL >> (j*2)); |
| 154 | out32(GPIO_IS2(core_add+offs), reg); |
| 155 | break; |
| 156 | |
| 157 | case GPIO_ALT3: |
| 158 | reg = in32(GPIO_IS3(core_add+offs)) |
| 159 | & ~(GPIO_MASK >> (j*2)); |
| 160 | reg = reg | (GPIO_IN_SEL >> (j*2)); |
| 161 | out32(GPIO_IS3(core_add+offs), reg); |
| 162 | break; |
| 163 | } |
| 164 | } |
| 165 | |
| 166 | if ((gpio_tab[gpio_core][i].in_out == GPIO_OUT) || |
| 167 | (gpio_tab[gpio_core][i].in_out == GPIO_BI)) { |
| 168 | |
| 169 | switch (gpio_tab[gpio_core][i].alt_nb) { |
| 170 | case GPIO_SEL: |
| 171 | if (gpio_core == GPIO0) { |
Stefan Roese | 85f7373 | 2007-06-15 07:39:43 +0200 | [diff] [blame] | 172 | /* |
| 173 | * Setup output value |
| 174 | * 1 -> high level |
| 175 | * 0 -> low level |
| 176 | * else -> don't touch |
| 177 | */ |
| 178 | reg = in32(GPIO0_OR); |
| 179 | if (gpio_tab[gpio_core][i].out_val == GPIO_OUT_1) |
| 180 | reg |= (0x80000000 >> (i)); |
| 181 | else if (gpio_tab[gpio_core][i].out_val == GPIO_OUT_0) |
| 182 | reg &= ~(0x80000000 >> (i)); |
| 183 | out32(GPIO0_OR, reg); |
| 184 | |
Benoît Monin | fba3fb0 | 2007-06-08 09:55:24 +0200 | [diff] [blame] | 185 | reg = in32(GPIO0_TCR) | (0x80000000 >> (i)); |
Stefan Roese | 3cb86f3 | 2007-03-24 15:45:34 +0100 | [diff] [blame] | 186 | out32(GPIO0_TCR, reg); |
| 187 | } |
| 188 | |
John Otken | d4024bb | 2007-07-26 17:49:11 +0200 | [diff] [blame] | 189 | #ifdef GPIO1 |
Stefan Roese | 3cb86f3 | 2007-03-24 15:45:34 +0100 | [diff] [blame] | 190 | if (gpio_core == GPIO1) { |
Stefan Roese | 85f7373 | 2007-06-15 07:39:43 +0200 | [diff] [blame] | 191 | /* |
| 192 | * Setup output value |
| 193 | * 1 -> high level |
| 194 | * 0 -> low level |
| 195 | * else -> don't touch |
| 196 | */ |
Stefan Roese | a71d96e | 2007-07-20 15:03:44 +0200 | [diff] [blame] | 197 | reg = in32(GPIO1_OR); |
Stefan Roese | 85f7373 | 2007-06-15 07:39:43 +0200 | [diff] [blame] | 198 | if (gpio_tab[gpio_core][i].out_val == GPIO_OUT_1) |
| 199 | reg |= (0x80000000 >> (i)); |
| 200 | else if (gpio_tab[gpio_core][i].out_val == GPIO_OUT_0) |
| 201 | reg &= ~(0x80000000 >> (i)); |
Stefan Roese | a71d96e | 2007-07-20 15:03:44 +0200 | [diff] [blame] | 202 | out32(GPIO1_OR, reg); |
Stefan Roese | 85f7373 | 2007-06-15 07:39:43 +0200 | [diff] [blame] | 203 | |
Benoît Monin | fba3fb0 | 2007-06-08 09:55:24 +0200 | [diff] [blame] | 204 | reg = in32(GPIO1_TCR) | (0x80000000 >> (i)); |
Stefan Roese | 3cb86f3 | 2007-03-24 15:45:34 +0100 | [diff] [blame] | 205 | out32(GPIO1_TCR, reg); |
| 206 | } |
John Otken | d4024bb | 2007-07-26 17:49:11 +0200 | [diff] [blame] | 207 | #endif /* GPIO1 */ |
Stefan Roese | 3cb86f3 | 2007-03-24 15:45:34 +0100 | [diff] [blame] | 208 | |
| 209 | reg = in32(GPIO_OS(core_add+offs)) |
| 210 | & ~(GPIO_MASK >> (j*2)); |
| 211 | out32(GPIO_OS(core_add+offs), reg); |
| 212 | reg = in32(GPIO_TS(core_add+offs)) |
| 213 | & ~(GPIO_MASK >> (j*2)); |
| 214 | out32(GPIO_TS(core_add+offs), reg); |
| 215 | break; |
| 216 | |
| 217 | case GPIO_ALT1: |
| 218 | reg = in32(GPIO_OS(core_add+offs)) |
| 219 | & ~(GPIO_MASK >> (j*2)); |
| 220 | reg = reg | (GPIO_ALT1_SEL >> (j*2)); |
| 221 | out32(GPIO_OS(core_add+offs), reg); |
| 222 | reg = in32(GPIO_TS(core_add+offs)) |
| 223 | & ~(GPIO_MASK >> (j*2)); |
| 224 | reg = reg | (GPIO_ALT1_SEL >> (j*2)); |
| 225 | out32(GPIO_TS(core_add+offs), reg); |
| 226 | break; |
| 227 | |
| 228 | case GPIO_ALT2: |
| 229 | reg = in32(GPIO_OS(core_add+offs)) |
| 230 | & ~(GPIO_MASK >> (j*2)); |
| 231 | reg = reg | (GPIO_ALT2_SEL >> (j*2)); |
| 232 | out32(GPIO_OS(core_add+offs), reg); |
| 233 | reg = in32(GPIO_TS(core_add+offs)) |
| 234 | & ~(GPIO_MASK >> (j*2)); |
| 235 | reg = reg | (GPIO_ALT2_SEL >> (j*2)); |
| 236 | out32(GPIO_TS(core_add+offs), reg); |
| 237 | break; |
| 238 | |
| 239 | case GPIO_ALT3: |
| 240 | reg = in32(GPIO_OS(core_add+offs)) |
| 241 | & ~(GPIO_MASK >> (j*2)); |
| 242 | reg = reg | (GPIO_ALT3_SEL >> (j*2)); |
| 243 | out32(GPIO_OS(core_add+offs), reg); |
| 244 | reg = in32(GPIO_TS(core_add+offs)) |
| 245 | & ~(GPIO_MASK >> (j*2)); |
| 246 | reg = reg | (GPIO_ALT3_SEL >> (j*2)); |
| 247 | out32(GPIO_TS(core_add+offs), reg); |
| 248 | break; |
| 249 | } |
| 250 | } |
| 251 | } |
| 252 | } |
| 253 | } |
| 254 | #endif /* CFG_440_GPIO_TABLE */ |