blob: 883abf7358a8e295a2f624d045d43d18244de602 [file] [log] [blame]
Shaohui Xie126fe702016-09-07 17:56:14 +08001/*
2 * Copyright 2016 Freescale Semiconductor, Inc.
3 *
4 * SPDX-License-Identifier: GPL-2.0+
5 */
6
7#include <common.h>
8#include <i2c.h>
9#include <fdt_support.h>
Simon Glass3eace372017-04-06 12:47:04 -060010#include <fsl_ddr_sdram.h>
Shaohui Xie126fe702016-09-07 17:56:14 +080011#include <asm/io.h>
12#include <asm/arch/clock.h>
13#include <asm/arch/fsl_serdes.h>
Hou Zhiqiang2ac2e202017-04-14 14:48:23 +080014#include <asm/arch/ppa.h>
Shaohui Xie126fe702016-09-07 17:56:14 +080015#include <asm/arch/fdt.h>
York Sun4961eaf2017-03-06 09:02:34 -080016#include <asm/arch/mmu.h>
Shaohui Xie126fe702016-09-07 17:56:14 +080017#include <asm/arch/soc.h>
18#include <ahci.h>
19#include <hwconfig.h>
20#include <mmc.h>
21#include <scsi.h>
22#include <fm_eth.h>
23#include <fsl_csu.h>
24#include <fsl_esdhc.h>
25#include <fsl_ifc.h>
Sumit Gargb7c19ea2017-03-23 13:48:17 +053026#include <fsl_sec.h>
Shaohui Xie126fe702016-09-07 17:56:14 +080027#include <spl.h>
28
29#include "../common/vid.h"
30#include "../common/qixis.h"
31#include "ls1046aqds_qixis.h"
32
33DECLARE_GLOBAL_DATA_PTR;
34
35enum {
36 MUX_TYPE_GPIO,
37};
38
39int checkboard(void)
40{
41 char buf[64];
42#ifndef CONFIG_SD_BOOT
43 u8 sw;
44#endif
45
46 puts("Board: LS1046AQDS, boot from ");
47
48#ifdef CONFIG_SD_BOOT
49 puts("SD\n");
50#else
51 sw = QIXIS_READ(brdcfg[0]);
52 sw = (sw & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT;
53
54 if (sw < 0x8)
55 printf("vBank: %d\n", sw);
56 else if (sw == 0x8)
57 puts("PromJet\n");
58 else if (sw == 0x9)
59 puts("NAND\n");
60 else if (sw == 0xF)
61 printf("QSPI\n");
62 else
63 printf("invalid setting of SW%u\n", QIXIS_LBMAP_SWITCH);
64#endif
65
66 printf("Sys ID: 0x%02x, Sys Ver: 0x%02x\n",
67 QIXIS_READ(id), QIXIS_READ(arch));
68
69 printf("FPGA: v%d (%s), build %d\n",
70 (int)QIXIS_READ(scver), qixis_read_tag(buf),
71 (int)qixis_read_minor());
72
73 return 0;
74}
75
76bool if_board_diff_clk(void)
77{
78 u8 diff_conf = QIXIS_READ(brdcfg[11]);
79
80 return diff_conf & 0x40;
81}
82
83unsigned long get_board_sys_clk(void)
84{
85 u8 sysclk_conf = QIXIS_READ(brdcfg[1]);
86
87 switch (sysclk_conf & 0x0f) {
88 case QIXIS_SYSCLK_64:
89 return 64000000;
90 case QIXIS_SYSCLK_83:
91 return 83333333;
92 case QIXIS_SYSCLK_100:
93 return 100000000;
94 case QIXIS_SYSCLK_125:
95 return 125000000;
96 case QIXIS_SYSCLK_133:
97 return 133333333;
98 case QIXIS_SYSCLK_150:
99 return 150000000;
100 case QIXIS_SYSCLK_160:
101 return 160000000;
102 case QIXIS_SYSCLK_166:
103 return 166666666;
104 }
105
106 return 66666666;
107}
108
109unsigned long get_board_ddr_clk(void)
110{
111 u8 ddrclk_conf = QIXIS_READ(brdcfg[1]);
112
113 if (if_board_diff_clk())
114 return get_board_sys_clk();
115 switch ((ddrclk_conf & 0x30) >> 4) {
116 case QIXIS_DDRCLK_100:
117 return 100000000;
118 case QIXIS_DDRCLK_125:
119 return 125000000;
120 case QIXIS_DDRCLK_133:
121 return 133333333;
122 }
123
124 return 66666666;
125}
126
Shaohui Xiefdc2b542016-10-28 14:24:02 +0800127#ifdef CONFIG_LPUART
128u32 get_lpuart_clk(void)
129{
130 return gd->bus_clk;
131}
132#endif
133
Shaohui Xie126fe702016-09-07 17:56:14 +0800134int select_i2c_ch_pca9547(u8 ch)
135{
136 int ret;
137
138 ret = i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, &ch, 1);
139 if (ret) {
140 puts("PCA: failed to select proper channel\n");
141 return ret;
142 }
143
144 return 0;
145}
146
147int dram_init(void)
148{
149 /*
150 * When resuming from deep sleep, the I2C channel may not be
151 * in the default channel. So, switch to the default channel
152 * before accessing DDR SPD.
153 */
154 select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
Simon Glass3eace372017-04-06 12:47:04 -0600155 fsl_initdram();
York Sun4961eaf2017-03-06 09:02:34 -0800156#if !defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD)
157 /* This will break-before-make MMU for DDR */
158 update_early_mmu_table();
159#endif
Shaohui Xie126fe702016-09-07 17:56:14 +0800160
161 return 0;
162}
163
164int i2c_multiplexer_select_vid_channel(u8 channel)
165{
166 return select_i2c_ch_pca9547(channel);
167}
168
169int board_early_init_f(void)
170{
171#ifdef CONFIG_HAS_FSL_XHCI_USB
172 struct ccsr_scfg *scfg = (struct ccsr_scfg *)CONFIG_SYS_FSL_SCFG_ADDR;
173 u32 usb_pwrfault;
174#endif
Shaohui Xiefdc2b542016-10-28 14:24:02 +0800175#ifdef CONFIG_LPUART
176 u8 uart;
177#endif
Shaohui Xie126fe702016-09-07 17:56:14 +0800178
179#ifdef CONFIG_SYS_I2C_EARLY_INIT
180 i2c_early_init_f();
181#endif
182 fsl_lsch2_early_init_f();
183
184#ifdef CONFIG_HAS_FSL_XHCI_USB
185 out_be32(&scfg->rcwpmuxcr0, 0x3333);
186 out_be32(&scfg->usbdrvvbus_selcr, SCFG_USBDRVVBUS_SELCR_USB1);
187 usb_pwrfault = (SCFG_USBPWRFAULT_DEDICATED <<
188 SCFG_USBPWRFAULT_USB3_SHIFT) |
189 (SCFG_USBPWRFAULT_DEDICATED <<
190 SCFG_USBPWRFAULT_USB2_SHIFT) |
191 (SCFG_USBPWRFAULT_SHARED <<
192 SCFG_USBPWRFAULT_USB1_SHIFT);
193 out_be32(&scfg->usbpwrfault_selcr, usb_pwrfault);
194#endif
195
Shaohui Xiefdc2b542016-10-28 14:24:02 +0800196#ifdef CONFIG_LPUART
197 /* We use lpuart0 as system console */
198 uart = QIXIS_READ(brdcfg[14]);
199 uart &= ~CFG_UART_MUX_MASK;
200 uart |= CFG_LPUART_EN << CFG_UART_MUX_SHIFT;
201 QIXIS_WRITE(brdcfg[14], uart);
202#endif
203
Shaohui Xie126fe702016-09-07 17:56:14 +0800204 return 0;
205}
206
207#ifdef CONFIG_FSL_DEEP_SLEEP
208/* determine if it is a warm boot */
209bool is_warm_boot(void)
210{
211#define DCFG_CCSR_CRSTSR_WDRFR (1 << 3)
212 struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR;
213
214 if (in_be32(&gur->crstsr) & DCFG_CCSR_CRSTSR_WDRFR)
215 return 1;
216
217 return 0;
218}
219#endif
220
221int config_board_mux(int ctrl_type)
222{
223 u8 reg14;
224
225 reg14 = QIXIS_READ(brdcfg[14]);
226
227 switch (ctrl_type) {
228 case MUX_TYPE_GPIO:
229 reg14 = (reg14 & (~0x6)) | 0x2;
230 break;
231 default:
232 puts("Unsupported mux interface type\n");
233 return -1;
234 }
235
236 QIXIS_WRITE(brdcfg[14], reg14);
237
238 return 0;
239}
240
241int config_serdes_mux(void)
242{
243 return 0;
244}
245
246#ifdef CONFIG_MISC_INIT_R
247int misc_init_r(void)
248{
249 if (hwconfig("gpio"))
250 config_board_mux(MUX_TYPE_GPIO);
251
252 return 0;
253}
254#endif
255
256int board_init(void)
257{
258 select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
259
260#ifdef CONFIG_SYS_FSL_SERDES
261 config_serdes_mux();
262#endif
263
Shaohui Xie126fe702016-09-07 17:56:14 +0800264 if (adjust_vdd(0))
265 printf("Warning: Adjusting core voltage failed.\n");
266
Hou Zhiqiang2ac2e202017-04-14 14:48:23 +0800267#ifdef CONFIG_FSL_LS_PPA
268 ppa_init();
269#endif
270
Sumit Gargb7c19ea2017-03-23 13:48:17 +0530271#ifdef CONFIG_SECURE_BOOT
272 /*
273 * In case of Secure Boot, the IBR configures the SMMU
274 * to allow only Secure transactions.
275 * SMMU must be reset in bypass mode.
276 * Set the ClientPD bit and Clear the USFCFG Bit
277 */
278 u32 val;
279 val = (in_le32(SMMU_SCR0) | SCR0_CLIENTPD_MASK) & ~(SCR0_USFCFG_MASK);
280 out_le32(SMMU_SCR0, val);
281 val = (in_le32(SMMU_NSCR0) | SCR0_CLIENTPD_MASK) & ~(SCR0_USFCFG_MASK);
282 out_le32(SMMU_NSCR0, val);
283#endif
284
285#ifdef CONFIG_FSL_CAAM
286 sec_init();
287#endif
288
Shaohui Xie126fe702016-09-07 17:56:14 +0800289 return 0;
290}
291
292#ifdef CONFIG_OF_BOARD_SETUP
293int ft_board_setup(void *blob, bd_t *bd)
294{
295 u64 base[CONFIG_NR_DRAM_BANKS];
296 u64 size[CONFIG_NR_DRAM_BANKS];
297 u8 reg;
298
299 /* fixup DT for the two DDR banks */
300 base[0] = gd->bd->bi_dram[0].start;
301 size[0] = gd->bd->bi_dram[0].size;
302 base[1] = gd->bd->bi_dram[1].start;
303 size[1] = gd->bd->bi_dram[1].size;
304
305 fdt_fixup_memory_banks(blob, base, size, 2);
306 ft_cpu_setup(blob, bd);
307
308#ifdef CONFIG_SYS_DPAA_FMAN
309 fdt_fixup_fman_ethernet(blob);
310 fdt_fixup_board_enet(blob);
311#endif
312
313 reg = QIXIS_READ(brdcfg[0]);
314 reg = (reg & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT;
315
316 /* Disable IFC if QSPI is enabled */
317 if (reg == 0xF)
318 do_fixup_by_compat(blob, "fsl,ifc",
319 "status", "disabled", 8 + 1, 1);
320
321 return 0;
322}
323#endif
324
325u8 flash_read8(void *addr)
326{
327 return __raw_readb(addr + 1);
328}
329
330void flash_write16(u16 val, void *addr)
331{
332 u16 shftval = (((val >> 8) & 0xff) | ((val << 8) & 0xff00));
333
334 __raw_writew(shftval, addr);
335}
336
337u16 flash_read16(void *addr)
338{
339 u16 val = __raw_readw(addr);
340
341 return (((val) >> 8) & 0x00ff) | (((val) << 8) & 0xff00);
342}