Gitiles
Code Review Sign In
gerrit.devboardsforandroid.linaro.org / platform / external / u-boot / 3d2d115a30e870b0ce7adfe1a6d8bdf73a016571 / . / arch / arm / dts / stm32mp157c-ed1.dts
blob: 4b20fabb717af9c781c965eaa0cd2faa079fc8da [file] [log] [blame]
Patrick Delaunay3d2d1152018-03-12 10:46:17 +0100[diff] [blame^]1/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */
2/*
3 * Copyright (C) STMicroelectronics 2017 - All Rights Reserved
4 * Author: Ludovic Barre <ludovic.barre@st.com> for STMicroelectronics.
5 */
6
7/dts-v1/;
8
9#include "stm32mp157.dtsi"
10#include <dt-bindings/gpio/gpio.h>
11#include <dt-bindings/input/input.h>
12#include <dt-bindings/pinctrl/stm32-pinfunc.h>
13
14/ {
15 model = "STMicroelectronics STM32MP157C pmic eval daughter";
16 compatible = "st,stm32mp157c-ed1", "st,stm32mp157";
17
18 chosen {
19 bootargs = "earlyprintk console=ttyS3,115200 root=/dev/ram";
20 stdout-path = "serial3:115200n8";
21 };
22
23 memory {
24 reg = <0xC0000000 0x40000000>;
25 };
26};
27
28&gpioa {
29 status = "okay";
30};
31
32&gpiob {
33 status = "okay";
34};
35
36&gpioc {
37 status = "okay";
38};
39
40&gpiod {
41 status = "okay";
42};
43
44&gpioe {
45 status = "okay";
46};
47
48&gpiof {
49 status = "okay";
50};
51
52&gpiog {
53 status = "okay";
54};
55
56&gpioh {
57 status = "okay";
58};
59
60&gpioi {
61 status = "okay";
62};
63
64&gpioj {
65 status = "okay";
66};
67
68&gpiok {
69 status = "okay";
70};
71
72&gpioz {
73 status = "okay";
74};
75
76&pinctrl {
77 uart4_pins_a: uart4@0 {
78 pins1 {
79 pinmux = <STM32_PINMUX('G', 11, AF6)>; /* UART4_TX */
80 bias-disable;
81 drive-push-pull;
82 slew-rate = <0>;
83 };
84 pins2 {
85 pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
86 bias-disable;
87 };
88 };
89
90 sdmmc1_b4_pins_a: sdmmc1-b4@0 {
91 pins {
92 pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
93 <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
94 <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */
95 <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */
96 <STM32_PINMUX('C', 12, AF12)>, /* SDMMC1_CK */
97 <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
98 slew-rate = <3>;
99 drive-push-pull;
100 bias-disable;
101 };
102 };
103
104 sdmmc1_dir_pins_a: sdmmc1-dir@0 {
105 pins {
106 pinmux = <STM32_PINMUX('F', 2, AF11)>, /* SDMMC1_D0DIR */
107 <STM32_PINMUX('C', 7, AF8)>, /* SDMMC1_D123DIR */
108 <STM32_PINMUX('B', 9, AF11)>, /* SDMMC1_CDIR */
109 <STM32_PINMUX('E', 4, AF8)>; /* SDMMC1_CKIN */
110 slew-rate = <3>;
111 drive-push-pull;
112 bias-pull-up;
113 };
114 };
115};
116
117&pinctrl_z {
118 i2c4_pins_a: i2c4@0 {
119 pins {
120 pinmux = <STM32_PINMUX('Z', 4, AF6)>, /* I2C4_SCL */
121 <STM32_PINMUX('Z', 5, AF6)>; /* I2C4_SDA */
122 bias-disable;
123 drive-open-drain;
124 slew-rate = <0>;
125 };
126 };
127};
128
129&i2c4 {
130 pinctrl-names = "default";
131 pinctrl-0 = <&i2c4_pins_a>;
132 i2c-scl-rising-time-ns = <185>;
133 i2c-scl-falling-time-ns = <20>;
134 status = "okay";
135
136 pmic: stpmu1@33 {
137 compatible = "st,stpmu1";
138 reg = <0x33>;
139 interrupts = <0 2>;
140 interrupt-parent = <&gpioa>;
141 interrupt-controller;
142 #interrupt-cells = <2>;
143 status = "okay";
144 };
145};
146
147&sdmmc1 {
148 pinctrl-names = "default";
149 pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_a>;
150 broken-cd;
151 st,dirpol;
152 st,negedge;
153 st,pin-ckin;
154 bus-width = <4>;
155 sd-uhs-sdr12;
156 sd-uhs-sdr25;
157 sd-uhs-sdr50;
158 sd-uhs-ddr50;
159 sd-uhs-sdr104;
160 status = "okay";
161};
162
163&uart4 {
164 pinctrl-names = "default";
165 pinctrl-0 = <&uart4_pins_a>;
166 status = "okay";
167};