blob: 84a7b849ad7435e055d23a871726a9ba4114f74f [file] [log] [blame]
Stefan Roeseb29ca4a2013-04-17 00:32:43 +00001/*
2 * Copyright (C) 2013 Stefan Roese <sr@denx.de>
3 *
Wolfgang Denk1a459662013-07-08 09:37:19 +02004 * SPDX-License-Identifier: GPL-2.0+
Stefan Roeseb29ca4a2013-04-17 00:32:43 +00005 */
6
7#include <common.h>
8#include <asm/io.h>
9#include <asm/arch/clock.h>
10#include <asm/arch/imx-regs.h>
11#include <asm/arch/iomux.h>
Eric Nelsonb47abc32013-11-13 16:36:19 -070012#include <asm/arch/mx6-pins.h>
Stefan Roeseb29ca4a2013-04-17 00:32:43 +000013#include <asm/arch/crm_regs.h>
14#include <asm/arch/sys_proto.h>
15#include <asm/gpio.h>
16#include <asm/imx-common/iomux-v3.h>
17#include <asm/imx-common/mxc_i2c.h>
18#include <asm/imx-common/boot_mode.h>
19#include <mmc.h>
20#include <fsl_esdhc.h>
21#include <micrel.h>
22#include <miiphy.h>
23#include <netdev.h>
24
25DECLARE_GLOBAL_DATA_PTR;
26
Benoît Thébaudeau7e2173c2013-04-26 01:34:47 +000027#define UART_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
Stefan Roeseb29ca4a2013-04-17 00:32:43 +000028 PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
29
Benoît Thébaudeau7e2173c2013-04-26 01:34:47 +000030#define USDHC_PAD_CTRL (PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_LOW | \
Stefan Roeseb29ca4a2013-04-17 00:32:43 +000031 PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
32
Benoît Thébaudeau7e2173c2013-04-26 01:34:47 +000033#define ENET_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
Stefan Roeseb29ca4a2013-04-17 00:32:43 +000034 PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
35
Benoît Thébaudeau7e2173c2013-04-26 01:34:47 +000036#define I2C_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
Stefan Roeseb29ca4a2013-04-17 00:32:43 +000037 PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \
38 PAD_CTL_ODE | PAD_CTL_SRE_FAST)
39
40int dram_init(void)
41{
42 gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE);
43
44 return 0;
45}
46
47iomux_v3_cfg_t const uart1_pads[] = {
Eric Nelson10fda482013-11-04 17:00:51 -070048 MX6_PAD_SD3_DAT6__UART1_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
49 MX6_PAD_SD3_DAT7__UART1_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
Stefan Roeseb29ca4a2013-04-17 00:32:43 +000050};
51
52iomux_v3_cfg_t const uart2_pads[] = {
Eric Nelson10fda482013-11-04 17:00:51 -070053 MX6_PAD_EIM_D26__UART2_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
54 MX6_PAD_EIM_D27__UART2_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
Stefan Roeseb29ca4a2013-04-17 00:32:43 +000055};
56
57iomux_v3_cfg_t const uart4_pads[] = {
Eric Nelson10fda482013-11-04 17:00:51 -070058 MX6_PAD_CSI0_DAT12__UART4_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
59 MX6_PAD_CSI0_DAT13__UART4_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
Stefan Roeseb29ca4a2013-04-17 00:32:43 +000060};
61
62#define PC MUX_PAD_CTRL(I2C_PAD_CTRL)
63
64struct i2c_pads_info i2c_pad_info0 = {
65 .scl = {
66 .i2c_mode = MX6_PAD_CSI0_DAT9__I2C1_SCL | PC,
Eric Nelson10fda482013-11-04 17:00:51 -070067 .gpio_mode = MX6_PAD_CSI0_DAT9__GPIO5_IO27 | PC,
Stefan Roeseb29ca4a2013-04-17 00:32:43 +000068 .gp = IMX_GPIO_NR(5, 27)
69 },
70 .sda = {
71 .i2c_mode = MX6_PAD_CSI0_DAT8__I2C1_SDA | PC,
Eric Nelson10fda482013-11-04 17:00:51 -070072 .gpio_mode = MX6_PAD_CSI0_DAT8__GPIO5_IO26 | PC,
Stefan Roeseb29ca4a2013-04-17 00:32:43 +000073 .gp = IMX_GPIO_NR(5, 26)
74 }
75};
76
77struct i2c_pads_info i2c_pad_info2 = {
78 .scl = {
79 .i2c_mode = MX6_PAD_GPIO_3__I2C3_SCL | PC,
Eric Nelson10fda482013-11-04 17:00:51 -070080 .gpio_mode = MX6_PAD_GPIO_3__GPIO1_IO03 | PC,
Stefan Roeseb29ca4a2013-04-17 00:32:43 +000081 .gp = IMX_GPIO_NR(1, 3)
82 },
83 .sda = {
84 .i2c_mode = MX6_PAD_GPIO_16__I2C3_SDA | PC,
Eric Nelson10fda482013-11-04 17:00:51 -070085 .gpio_mode = MX6_PAD_GPIO_16__GPIO7_IO11 | PC,
Stefan Roeseb29ca4a2013-04-17 00:32:43 +000086 .gp = IMX_GPIO_NR(7, 11)
87 }
88};
89
90iomux_v3_cfg_t const usdhc3_pads[] = {
Eric Nelson10fda482013-11-04 17:00:51 -070091 MX6_PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
92 MX6_PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
93 MX6_PAD_SD3_DAT0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
94 MX6_PAD_SD3_DAT1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
95 MX6_PAD_SD3_DAT2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
96 MX6_PAD_SD3_DAT3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
97 MX6_PAD_SD3_DAT5__GPIO7_IO00 | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */
Stefan Roeseb29ca4a2013-04-17 00:32:43 +000098};
99
100iomux_v3_cfg_t const enet_pads1[] = {
101 MX6_PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL),
102 MX6_PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL),
Eric Nelson10fda482013-11-04 17:00:51 -0700103 MX6_PAD_RGMII_TXC__RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL),
104 MX6_PAD_RGMII_TD0__RGMII_TD0 | MUX_PAD_CTRL(ENET_PAD_CTRL),
105 MX6_PAD_RGMII_TD1__RGMII_TD1 | MUX_PAD_CTRL(ENET_PAD_CTRL),
106 MX6_PAD_RGMII_TD2__RGMII_TD2 | MUX_PAD_CTRL(ENET_PAD_CTRL),
107 MX6_PAD_RGMII_TD3__RGMII_TD3 | MUX_PAD_CTRL(ENET_PAD_CTRL),
Stefan Roeseb29ca4a2013-04-17 00:32:43 +0000108 MX6_PAD_RGMII_TX_CTL__RGMII_TX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL),
109 MX6_PAD_ENET_REF_CLK__ENET_TX_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL),
110 /* pin 35 - 1 (PHY_AD2) on reset */
Eric Nelson10fda482013-11-04 17:00:51 -0700111 MX6_PAD_RGMII_RXC__GPIO6_IO30 | MUX_PAD_CTRL(NO_PAD_CTRL),
Stefan Roeseb29ca4a2013-04-17 00:32:43 +0000112 /* pin 32 - 1 - (MODE0) all */
Eric Nelson10fda482013-11-04 17:00:51 -0700113 MX6_PAD_RGMII_RD0__GPIO6_IO25 | MUX_PAD_CTRL(NO_PAD_CTRL),
Stefan Roeseb29ca4a2013-04-17 00:32:43 +0000114 /* pin 31 - 1 - (MODE1) all */
Eric Nelson10fda482013-11-04 17:00:51 -0700115 MX6_PAD_RGMII_RD1__GPIO6_IO27 | MUX_PAD_CTRL(NO_PAD_CTRL),
Stefan Roeseb29ca4a2013-04-17 00:32:43 +0000116 /* pin 28 - 1 - (MODE2) all */
Eric Nelson10fda482013-11-04 17:00:51 -0700117 MX6_PAD_RGMII_RD2__GPIO6_IO28 | MUX_PAD_CTRL(NO_PAD_CTRL),
Stefan Roeseb29ca4a2013-04-17 00:32:43 +0000118 /* pin 27 - 1 - (MODE3) all */
Eric Nelson10fda482013-11-04 17:00:51 -0700119 MX6_PAD_RGMII_RD3__GPIO6_IO29 | MUX_PAD_CTRL(NO_PAD_CTRL),
Stefan Roeseb29ca4a2013-04-17 00:32:43 +0000120 /* pin 33 - 1 - (CLK125_EN) 125Mhz clockout enabled */
Eric Nelson10fda482013-11-04 17:00:51 -0700121 MX6_PAD_RGMII_RX_CTL__GPIO6_IO24 | MUX_PAD_CTRL(NO_PAD_CTRL),
Stefan Roeseb29ca4a2013-04-17 00:32:43 +0000122 /* pin 42 PHY nRST */
Eric Nelson10fda482013-11-04 17:00:51 -0700123 MX6_PAD_EIM_D23__GPIO3_IO23 | MUX_PAD_CTRL(NO_PAD_CTRL),
Stefan Roeseb29ca4a2013-04-17 00:32:43 +0000124};
125
126iomux_v3_cfg_t const enet_pads2[] = {
Eric Nelson10fda482013-11-04 17:00:51 -0700127 MX6_PAD_RGMII_RXC__RGMII_RXC | MUX_PAD_CTRL(ENET_PAD_CTRL),
128 MX6_PAD_RGMII_RD0__RGMII_RD0 | MUX_PAD_CTRL(ENET_PAD_CTRL),
129 MX6_PAD_RGMII_RD1__RGMII_RD1 | MUX_PAD_CTRL(ENET_PAD_CTRL),
130 MX6_PAD_RGMII_RD2__RGMII_RD2 | MUX_PAD_CTRL(ENET_PAD_CTRL),
131 MX6_PAD_RGMII_RD3__RGMII_RD3 | MUX_PAD_CTRL(ENET_PAD_CTRL),
Stefan Roeseb29ca4a2013-04-17 00:32:43 +0000132 MX6_PAD_RGMII_RX_CTL__RGMII_RX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL),
133};
134
135iomux_v3_cfg_t nfc_pads[] = {
Eric Nelson10fda482013-11-04 17:00:51 -0700136 MX6_PAD_NANDF_CLE__NAND_CLE | MUX_PAD_CTRL(NO_PAD_CTRL),
137 MX6_PAD_NANDF_ALE__NAND_ALE | MUX_PAD_CTRL(NO_PAD_CTRL),
138 MX6_PAD_NANDF_WP_B__NAND_WP_B | MUX_PAD_CTRL(NO_PAD_CTRL),
139 MX6_PAD_NANDF_RB0__NAND_READY_B | MUX_PAD_CTRL(NO_PAD_CTRL),
140 MX6_PAD_NANDF_CS0__NAND_CE0_B | MUX_PAD_CTRL(NO_PAD_CTRL),
141 MX6_PAD_NANDF_CS1__NAND_CE1_B | MUX_PAD_CTRL(NO_PAD_CTRL),
142 MX6_PAD_NANDF_CS2__NAND_CE2_B | MUX_PAD_CTRL(NO_PAD_CTRL),
143 MX6_PAD_NANDF_CS3__NAND_CE3_B | MUX_PAD_CTRL(NO_PAD_CTRL),
144 MX6_PAD_SD4_CMD__NAND_RE_B | MUX_PAD_CTRL(NO_PAD_CTRL),
145 MX6_PAD_SD4_CLK__NAND_WE_B | MUX_PAD_CTRL(NO_PAD_CTRL),
146 MX6_PAD_NANDF_D0__NAND_DATA00 | MUX_PAD_CTRL(NO_PAD_CTRL),
147 MX6_PAD_NANDF_D1__NAND_DATA01 | MUX_PAD_CTRL(NO_PAD_CTRL),
148 MX6_PAD_NANDF_D2__NAND_DATA02 | MUX_PAD_CTRL(NO_PAD_CTRL),
149 MX6_PAD_NANDF_D3__NAND_DATA03 | MUX_PAD_CTRL(NO_PAD_CTRL),
150 MX6_PAD_NANDF_D4__NAND_DATA04 | MUX_PAD_CTRL(NO_PAD_CTRL),
151 MX6_PAD_NANDF_D5__NAND_DATA05 | MUX_PAD_CTRL(NO_PAD_CTRL),
152 MX6_PAD_NANDF_D6__NAND_DATA06 | MUX_PAD_CTRL(NO_PAD_CTRL),
153 MX6_PAD_NANDF_D7__NAND_DATA07 | MUX_PAD_CTRL(NO_PAD_CTRL),
154 MX6_PAD_SD4_DAT0__NAND_DQS | MUX_PAD_CTRL(NO_PAD_CTRL),
Stefan Roeseb29ca4a2013-04-17 00:32:43 +0000155};
156
157static void setup_gpmi_nand(void)
158{
159 struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
160
161 /* config gpmi nand iomux */
162 imx_iomux_v3_setup_multiple_pads(nfc_pads,
163 ARRAY_SIZE(nfc_pads));
164
165 /* config gpmi and bch clock to 100 MHz */
166 clrsetbits_le32(&mxc_ccm->cs2cdr,
167 MXC_CCM_CS2CDR_ENFC_CLK_PODF_MASK |
168 MXC_CCM_CS2CDR_ENFC_CLK_PRED_MASK |
169 MXC_CCM_CS2CDR_ENFC_CLK_SEL_MASK,
170 MXC_CCM_CS2CDR_ENFC_CLK_PODF(0) |
171 MXC_CCM_CS2CDR_ENFC_CLK_PRED(3) |
172 MXC_CCM_CS2CDR_ENFC_CLK_SEL(3));
173
174 /* enable gpmi and bch clock gating */
175 setbits_le32(&mxc_ccm->CCGR4,
176 MXC_CCM_CCGR4_RAWNAND_U_BCH_INPUT_APB_MASK |
177 MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_BCH_MASK |
178 MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_GPMI_IO_MASK |
179 MXC_CCM_CCGR4_RAWNAND_U_GPMI_INPUT_APB_MASK |
180 MXC_CCM_CCGR4_PL301_MX6QPER1_BCH_OFFSET);
181
182 /* enable apbh clock gating */
183 setbits_le32(&mxc_ccm->CCGR0, MXC_CCM_CCGR0_APBHDMA_MASK);
184}
185
186static void setup_iomux_enet(void)
187{
188 gpio_direction_output(IMX_GPIO_NR(3, 23), 0);
189 gpio_direction_output(IMX_GPIO_NR(6, 30), 1);
190 gpio_direction_output(IMX_GPIO_NR(6, 25), 1);
191 gpio_direction_output(IMX_GPIO_NR(6, 27), 1);
192 gpio_direction_output(IMX_GPIO_NR(6, 28), 1);
193 gpio_direction_output(IMX_GPIO_NR(6, 29), 1);
194 imx_iomux_v3_setup_multiple_pads(enet_pads1, ARRAY_SIZE(enet_pads1));
195 gpio_direction_output(IMX_GPIO_NR(6, 24), 1);
196
197 /* Need delay 10ms according to KSZ9021 spec */
198 udelay(1000 * 10);
199 gpio_set_value(IMX_GPIO_NR(3, 23), 1);
200
201 imx_iomux_v3_setup_multiple_pads(enet_pads2, ARRAY_SIZE(enet_pads2));
202}
203
204static void setup_iomux_uart(void)
205{
206 imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads));
207 imx_iomux_v3_setup_multiple_pads(uart2_pads, ARRAY_SIZE(uart2_pads));
208 imx_iomux_v3_setup_multiple_pads(uart4_pads, ARRAY_SIZE(uart4_pads));
209}
210
211#ifdef CONFIG_USB_EHCI_MX6
212int board_ehci_hcd_init(int port)
213{
214 return 0;
215}
216
217#endif
218
219#ifdef CONFIG_FSL_ESDHC
220struct fsl_esdhc_cfg usdhc_cfg[1] = {
221 { USDHC3_BASE_ADDR },
222};
223
224int board_mmc_getcd(struct mmc *mmc)
225{
226 struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
227
228 if (cfg->esdhc_base == USDHC3_BASE_ADDR) {
229 gpio_direction_input(IMX_GPIO_NR(7, 0));
230 return !gpio_get_value(IMX_GPIO_NR(7, 0));
231 }
232
233 return 0;
234}
235
236int board_mmc_init(bd_t *bis)
237{
238 /*
239 * Only one USDHC controller on titianium
240 */
241 imx_iomux_v3_setup_multiple_pads(usdhc3_pads, ARRAY_SIZE(usdhc3_pads));
242 usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
243
244 return fsl_esdhc_initialize(bis, &usdhc_cfg[0]);
245}
246#endif
247
248int board_phy_config(struct phy_device *phydev)
249{
250 /* min rx data delay */
251 ksz9021_phy_extended_write(phydev,
252 MII_KSZ9021_EXT_RGMII_RX_DATA_SKEW, 0x0);
253 /* min tx data delay */
254 ksz9021_phy_extended_write(phydev,
255 MII_KSZ9021_EXT_RGMII_TX_DATA_SKEW, 0x0);
256 /* max rx/tx clock delay, min rx/tx control */
257 ksz9021_phy_extended_write(phydev,
258 MII_KSZ9021_EXT_RGMII_CLOCK_SKEW, 0xf0f0);
259 if (phydev->drv->config)
260 phydev->drv->config(phydev);
261
262 return 0;
263}
264
265int board_eth_init(bd_t *bis)
266{
Stefan Roeseb29ca4a2013-04-17 00:32:43 +0000267 setup_iomux_enet();
268
Fabio Estevam8aa42442014-01-04 17:36:29 -0200269 return cpu_eth_init(bis);
Stefan Roeseb29ca4a2013-04-17 00:32:43 +0000270}
271
272int board_early_init_f(void)
273{
274 setup_iomux_uart();
275
276 return 0;
277}
278
279int board_init(void)
280{
281 /* address of boot parameters */
282 gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
283
284 setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info0);
285 setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info2);
286
287 setup_gpmi_nand();
288
289 return 0;
290}
291
292int checkboard(void)
293{
294 puts("Board: Titanium\n");
295
296 return 0;
297}
298
299#ifdef CONFIG_CMD_BMODE
300static const struct boot_mode board_boot_modes[] = {
301 /* NAND */
302 { "nand", MAKE_CFGVAL(0x80, 0x02, 0x00, 0x00) },
303 /* 4 bit bus width */
304 { "mmc0", MAKE_CFGVAL(0x40, 0x30, 0x00, 0x00) },
305 { "mmc1", MAKE_CFGVAL(0x40, 0x38, 0x00, 0x00) },
306 { NULL, 0 },
307};
308#endif
309
310int misc_init_r(void)
311{
312#ifdef CONFIG_CMD_BMODE
313 add_board_boot_modes(board_boot_modes);
314#endif
315
316 return 0;
317}