blob: 12decfeaa57abb3b61492a7370073e58e00275c8 [file] [log] [blame]
wdenkfe8c2802002-11-03 00:38:21 +00001/*
2 * MPC8xx Communication Processor Module.
3 * Copyright (c) 1997 Dan Malek (dmalek@jlc.net)
4 *
Wolfgang Denk8cba0902006-05-12 16:15:46 +02005 * (C) Copyright 2000-2006
wdenkd4ca31c2004-01-02 14:00:00 +00006 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
7 *
wdenkfe8c2802002-11-03 00:38:21 +00008 * This file contains structures and information for the communication
9 * processor channels. Some CPM control and status is available
10 * throught the MPC8xx internal memory map. See immap.h for details.
11 * This file only contains what I need for the moment, not the total
12 * CPM capabilities. I (or someone else) will add definitions as they
13 * are needed. -- Dan
14 *
15 * On the MBX board, EPPC-Bug loads CPM microcode into the first 512
16 * bytes of the DP RAM and relocates the I2C parameter area to the
17 * IDMA1 space. The remaining DP RAM is available for buffer descriptors
18 * or other use.
19 */
20#ifndef __CPM_8XX__
21#define __CPM_8XX__
22
23#include <linux/config.h>
24#include <asm/8xx_immap.h>
25
26/* CPM Command register.
27*/
wdenk7c7a23b2002-12-07 00:20:59 +000028#define CPM_CR_RST ((ushort)0x8000)
29#define CPM_CR_OPCODE ((ushort)0x0f00)
30#define CPM_CR_CHAN ((ushort)0x00f0)
31#define CPM_CR_FLG ((ushort)0x0001)
wdenkfe8c2802002-11-03 00:38:21 +000032
33/* Some commands (there are more...later)
34*/
35#define CPM_CR_INIT_TRX ((ushort)0x0000)
36#define CPM_CR_INIT_RX ((ushort)0x0001)
37#define CPM_CR_INIT_TX ((ushort)0x0002)
38#define CPM_CR_HUNT_MODE ((ushort)0x0003)
39#define CPM_CR_STOP_TX ((ushort)0x0004)
40#define CPM_CR_RESTART_TX ((ushort)0x0006)
41#define CPM_CR_SET_GADDR ((ushort)0x0008)
42
43/* Channel numbers.
44*/
wdenk7c7a23b2002-12-07 00:20:59 +000045#define CPM_CR_CH_SCC1 ((ushort)0x0000)
46#define CPM_CR_CH_I2C ((ushort)0x0001) /* I2C and IDMA1 */
47#define CPM_CR_CH_SCC2 ((ushort)0x0004)
48#define CPM_CR_CH_SPI ((ushort)0x0005) /* SPI/IDMA2/Timers */
49#define CPM_CR_CH_SCC3 ((ushort)0x0008)
50#define CPM_CR_CH_SMC1 ((ushort)0x0009) /* SMC1 / DSP1 */
51#define CPM_CR_CH_SCC4 ((ushort)0x000c)
52#define CPM_CR_CH_SMC2 ((ushort)0x000d) /* SMC2 / DSP2 */
wdenkfe8c2802002-11-03 00:38:21 +000053
54#define mk_cr_cmd(CH, CMD) ((CMD << 8) | (CH << 4))
55
56/*
57 * DPRAM defines and allocation functions
58 */
59
60/* The dual ported RAM is multi-functional. Some areas can be (and are
61 * being) used for microcode. There is an area that can only be used
62 * as data ram for buffer descriptors, which is all we use right now.
63 * Currently the first 512 and last 256 bytes are used for microcode.
64 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020065#ifdef CONFIG_SYS_ALLOC_DPRAM
wdenkfe8c2802002-11-03 00:38:21 +000066
67#define CPM_DATAONLY_BASE ((uint)0x0800)
68#define CPM_DATAONLY_SIZE ((uint)0x0700)
69#define CPM_DP_NOSPACE ((uint)0x7fffffff)
70
71#else
72
73#define CPM_SERIAL_BASE 0x0800
74#define CPM_I2C_BASE 0x0820
75#define CPM_SPI_BASE 0x0840
76#define CPM_FEC_BASE 0x0860
wdenk79536a62004-09-27 20:20:11 +000077#define CPM_SERIAL2_BASE 0x08E0
wdenkfe8c2802002-11-03 00:38:21 +000078#define CPM_SCC_BASE 0x0900
79#define CPM_POST_BASE 0x0980
wdenk281e00a2004-08-01 22:48:16 +000080#define CPM_WLKBD_BASE 0x0a00
wdenkfe8c2802002-11-03 00:38:21 +000081
82#endif
83
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020084#ifndef CONFIG_SYS_CPM_POST_WORD_ADDR
wdenkfe8c2802002-11-03 00:38:21 +000085#define CPM_POST_WORD_ADDR 0x07FC
wdenkea909b72002-11-21 23:11:29 +000086#else
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020087#define CPM_POST_WORD_ADDR CONFIG_SYS_CPM_POST_WORD_ADDR
wdenkea909b72002-11-21 23:11:29 +000088#endif
wdenkfe8c2802002-11-03 00:38:21 +000089
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020090#ifndef CONFIG_SYS_CPM_BOOTCOUNT_ADDR
wdenkbdccc4f2003-08-05 17:43:17 +000091#define CPM_BOOTCOUNT_ADDR (CPM_POST_WORD_ADDR - 2*sizeof(ulong))
92#else
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020093#define CPM_BOOTCOUNT_ADDR CONFIG_SYS_CPM_BOOTCOUNT_ADDR
wdenkbdccc4f2003-08-05 17:43:17 +000094#endif
95
wdenkfe8c2802002-11-03 00:38:21 +000096#define BD_IIC_START ((uint) 0x0400) /* <- please use CPM_I2C_BASE !! */
97
98/* Export the base address of the communication processor registers
99 * and dual port ram.
100 */
101extern cpm8xx_t *cpmp; /* Pointer to comm processor */
102
103/* Buffer descriptors used by many of the CPM protocols.
104*/
105typedef struct cpm_buf_desc {
106 ushort cbd_sc; /* Status and Control */
107 ushort cbd_datlen; /* Data length in buffer */
108 uint cbd_bufaddr; /* Buffer address in host memory */
109} cbd_t;
110
111#define BD_SC_EMPTY ((ushort)0x8000) /* Recieve is empty */
112#define BD_SC_READY ((ushort)0x8000) /* Transmit is ready */
113#define BD_SC_WRAP ((ushort)0x2000) /* Last buffer descriptor */
114#define BD_SC_INTRPT ((ushort)0x1000) /* Interrupt on change */
115#define BD_SC_LAST ((ushort)0x0800) /* Last buffer in frame */
116#define BD_SC_TC ((ushort)0x0400) /* Transmit CRC */
117#define BD_SC_CM ((ushort)0x0200) /* Continous mode */
118#define BD_SC_ID ((ushort)0x0100) /* Rec'd too many idles */
119#define BD_SC_P ((ushort)0x0100) /* xmt preamble */
120#define BD_SC_BR ((ushort)0x0020) /* Break received */
121#define BD_SC_FR ((ushort)0x0010) /* Framing error */
122#define BD_SC_PR ((ushort)0x0008) /* Parity error */
123#define BD_SC_OV ((ushort)0x0002) /* Overrun */
124#define BD_SC_CD ((ushort)0x0001) /* Carrier Detect lost */
125
126/* Parameter RAM offsets.
127*/
128#define PROFF_SCC1 ((uint)0x0000)
129#define PROFF_IIC ((uint)0x0080)
130#define PROFF_SCC2 ((uint)0x0100)
131#define PROFF_SPI ((uint)0x0180)
132#define PROFF_SCC3 ((uint)0x0200)
133#define PROFF_SMC1 ((uint)0x0280)
134#define PROFF_SCC4 ((uint)0x0300)
135#define PROFF_SMC2 ((uint)0x0380)
136
137/* Define enough so I can at least use the serial port as a UART.
138 * The MBX uses SMC1 as the host serial port.
139 */
140typedef struct smc_uart {
141 ushort smc_rbase; /* Rx Buffer descriptor base address */
142 ushort smc_tbase; /* Tx Buffer descriptor base address */
143 u_char smc_rfcr; /* Rx function code */
144 u_char smc_tfcr; /* Tx function code */
145 ushort smc_mrblr; /* Max receive buffer length */
146 uint smc_rstate; /* Internal */
147 uint smc_idp; /* Internal */
148 ushort smc_rbptr; /* Internal */
149 ushort smc_ibc; /* Internal */
150 uint smc_rxtmp; /* Internal */
151 uint smc_tstate; /* Internal */
152 uint smc_tdp; /* Internal */
153 ushort smc_tbptr; /* Internal */
154 ushort smc_tbc; /* Internal */
155 uint smc_txtmp; /* Internal */
156 ushort smc_maxidl; /* Maximum idle characters */
157 ushort smc_tmpidl; /* Temporary idle counter */
158 ushort smc_brklen; /* Last received break length */
159 ushort smc_brkec; /* rcv'd break condition counter */
160 ushort smc_brkcr; /* xmt break count register */
161 ushort smc_rmask; /* Temporary bit mask */
Heiko Schocherb423d052008-01-11 01:12:07 +0100162 u_char res1[8];
163 ushort smc_rpbase; /* Relocation pointer */
wdenkfe8c2802002-11-03 00:38:21 +0000164} smc_uart_t;
165
166/* Function code bits.
167*/
168#define SMC_EB ((u_char)0x10) /* Set big endian byte order */
169
170/* SMC uart mode register.
171*/
172#define SMCMR_REN ((ushort)0x0001)
173#define SMCMR_TEN ((ushort)0x0002)
174#define SMCMR_DM ((ushort)0x000c)
175#define SMCMR_SM_GCI ((ushort)0x0000)
176#define SMCMR_SM_UART ((ushort)0x0020)
177#define SMCMR_SM_TRANS ((ushort)0x0030)
178#define SMCMR_SM_MASK ((ushort)0x0030)
179#define SMCMR_PM_EVEN ((ushort)0x0100) /* Even parity, else odd */
180#define SMCMR_REVD SMCMR_PM_EVEN
181#define SMCMR_PEN ((ushort)0x0200) /* Parity enable */
182#define SMCMR_BS SMCMR_PEN
183#define SMCMR_SL ((ushort)0x0400) /* Two stops, else one */
184#define SMCR_CLEN_MASK ((ushort)0x7800) /* Character length */
185#define smcr_mk_clen(C) (((C) << 11) & SMCR_CLEN_MASK)
186
187/* SMC2 as Centronics parallel printer. It is half duplex, in that
188 * it can only receive or transmit. The parameter ram values for
189 * each direction are either unique or properly overlap, so we can
190 * include them in one structure.
191 */
192typedef struct smc_centronics {
193 ushort scent_rbase;
194 ushort scent_tbase;
195 u_char scent_cfcr;
196 u_char scent_smask;
197 ushort scent_mrblr;
198 uint scent_rstate;
199 uint scent_r_ptr;
200 ushort scent_rbptr;
201 ushort scent_r_cnt;
202 uint scent_rtemp;
203 uint scent_tstate;
204 uint scent_t_ptr;
205 ushort scent_tbptr;
206 ushort scent_t_cnt;
207 uint scent_ttemp;
208 ushort scent_max_sl;
209 ushort scent_sl_cnt;
210 ushort scent_character1;
211 ushort scent_character2;
212 ushort scent_character3;
213 ushort scent_character4;
214 ushort scent_character5;
215 ushort scent_character6;
216 ushort scent_character7;
217 ushort scent_character8;
218 ushort scent_rccm;
219 ushort scent_rccr;
220} smc_cent_t;
221
222/* Centronics Status Mask Register.
223*/
224#define SMC_CENT_F ((u_char)0x08)
225#define SMC_CENT_PE ((u_char)0x04)
226#define SMC_CENT_S ((u_char)0x02)
227
228/* SMC Event and Mask register.
229*/
230#define SMCM_BRKE ((unsigned char)0x40) /* When in UART Mode */
231#define SMCM_BRK ((unsigned char)0x10) /* When in UART Mode */
232#define SMCM_TXE ((unsigned char)0x10) /* When in Transparent Mode */
233#define SMCM_BSY ((unsigned char)0x04)
234#define SMCM_TX ((unsigned char)0x02)
235#define SMCM_RX ((unsigned char)0x01)
236
237/* Baud rate generators.
238*/
239#define CPM_BRG_RST ((uint)0x00020000)
240#define CPM_BRG_EN ((uint)0x00010000)
241#define CPM_BRG_EXTC_INT ((uint)0x00000000)
242#define CPM_BRG_EXTC_CLK2 ((uint)0x00004000)
243#define CPM_BRG_EXTC_CLK6 ((uint)0x00008000)
244#define CPM_BRG_ATB ((uint)0x00002000)
245#define CPM_BRG_CD_MASK ((uint)0x00001ffe)
246#define CPM_BRG_DIV16 ((uint)0x00000001)
247
248/* SI Clock Route Register
249*/
250#define SICR_RCLK_SCC1_BRG1 ((uint)0x00000000)
251#define SICR_TCLK_SCC1_BRG1 ((uint)0x00000000)
252#define SICR_RCLK_SCC2_BRG2 ((uint)0x00000800)
253#define SICR_TCLK_SCC2_BRG2 ((uint)0x00000100)
254#define SICR_RCLK_SCC3_BRG3 ((uint)0x00100000)
255#define SICR_TCLK_SCC3_BRG3 ((uint)0x00020000)
256#define SICR_RCLK_SCC4_BRG4 ((uint)0x18000000)
257#define SICR_TCLK_SCC4_BRG4 ((uint)0x03000000)
258
259/* SCCs.
260*/
261#define SCC_GSMRH_IRP ((uint)0x00040000)
262#define SCC_GSMRH_GDE ((uint)0x00010000)
263#define SCC_GSMRH_TCRC_CCITT ((uint)0x00008000)
264#define SCC_GSMRH_TCRC_BISYNC ((uint)0x00004000)
265#define SCC_GSMRH_TCRC_HDLC ((uint)0x00000000)
266#define SCC_GSMRH_REVD ((uint)0x00002000)
267#define SCC_GSMRH_TRX ((uint)0x00001000)
268#define SCC_GSMRH_TTX ((uint)0x00000800)
269#define SCC_GSMRH_CDP ((uint)0x00000400)
270#define SCC_GSMRH_CTSP ((uint)0x00000200)
271#define SCC_GSMRH_CDS ((uint)0x00000100)
272#define SCC_GSMRH_CTSS ((uint)0x00000080)
273#define SCC_GSMRH_TFL ((uint)0x00000040)
274#define SCC_GSMRH_RFW ((uint)0x00000020)
275#define SCC_GSMRH_TXSY ((uint)0x00000010)
276#define SCC_GSMRH_SYNL16 ((uint)0x0000000c)
277#define SCC_GSMRH_SYNL8 ((uint)0x00000008)
278#define SCC_GSMRH_SYNL4 ((uint)0x00000004)
279#define SCC_GSMRH_RTSM ((uint)0x00000002)
280#define SCC_GSMRH_RSYN ((uint)0x00000001)
281
282#define SCC_GSMRL_SIR ((uint)0x80000000) /* SCC2 only */
283#define SCC_GSMRL_EDGE_NONE ((uint)0x60000000)
284#define SCC_GSMRL_EDGE_NEG ((uint)0x40000000)
285#define SCC_GSMRL_EDGE_POS ((uint)0x20000000)
286#define SCC_GSMRL_EDGE_BOTH ((uint)0x00000000)
287#define SCC_GSMRL_TCI ((uint)0x10000000)
288#define SCC_GSMRL_TSNC_3 ((uint)0x0c000000)
289#define SCC_GSMRL_TSNC_4 ((uint)0x08000000)
290#define SCC_GSMRL_TSNC_14 ((uint)0x04000000)
291#define SCC_GSMRL_TSNC_INF ((uint)0x00000000)
292#define SCC_GSMRL_RINV ((uint)0x02000000)
293#define SCC_GSMRL_TINV ((uint)0x01000000)
294#define SCC_GSMRL_TPL_128 ((uint)0x00c00000)
295#define SCC_GSMRL_TPL_64 ((uint)0x00a00000)
296#define SCC_GSMRL_TPL_48 ((uint)0x00800000)
297#define SCC_GSMRL_TPL_32 ((uint)0x00600000)
298#define SCC_GSMRL_TPL_16 ((uint)0x00400000)
299#define SCC_GSMRL_TPL_8 ((uint)0x00200000)
300#define SCC_GSMRL_TPL_NONE ((uint)0x00000000)
301#define SCC_GSMRL_TPP_ALL1 ((uint)0x00180000)
302#define SCC_GSMRL_TPP_01 ((uint)0x00100000)
303#define SCC_GSMRL_TPP_10 ((uint)0x00080000)
304#define SCC_GSMRL_TPP_ZEROS ((uint)0x00000000)
305#define SCC_GSMRL_TEND ((uint)0x00040000)
306#define SCC_GSMRL_TDCR_32 ((uint)0x00030000)
307#define SCC_GSMRL_TDCR_16 ((uint)0x00020000)
308#define SCC_GSMRL_TDCR_8 ((uint)0x00010000)
309#define SCC_GSMRL_TDCR_1 ((uint)0x00000000)
310#define SCC_GSMRL_RDCR_32 ((uint)0x0000c000)
311#define SCC_GSMRL_RDCR_16 ((uint)0x00008000)
312#define SCC_GSMRL_RDCR_8 ((uint)0x00004000)
313#define SCC_GSMRL_RDCR_1 ((uint)0x00000000)
314#define SCC_GSMRL_RENC_DFMAN ((uint)0x00003000)
315#define SCC_GSMRL_RENC_MANCH ((uint)0x00002000)
316#define SCC_GSMRL_RENC_FM0 ((uint)0x00001000)
317#define SCC_GSMRL_RENC_NRZI ((uint)0x00000800)
318#define SCC_GSMRL_RENC_NRZ ((uint)0x00000000)
319#define SCC_GSMRL_TENC_DFMAN ((uint)0x00000600)
320#define SCC_GSMRL_TENC_MANCH ((uint)0x00000400)
321#define SCC_GSMRL_TENC_FM0 ((uint)0x00000200)
322#define SCC_GSMRL_TENC_NRZI ((uint)0x00000100)
323#define SCC_GSMRL_TENC_NRZ ((uint)0x00000000)
324#define SCC_GSMRL_DIAG_LE ((uint)0x000000c0) /* Loop and echo */
325#define SCC_GSMRL_DIAG_ECHO ((uint)0x00000080)
326#define SCC_GSMRL_DIAG_LOOP ((uint)0x00000040)
327#define SCC_GSMRL_DIAG_NORM ((uint)0x00000000)
328#define SCC_GSMRL_ENR ((uint)0x00000020)
329#define SCC_GSMRL_ENT ((uint)0x00000010)
330#define SCC_GSMRL_MODE_ENET ((uint)0x0000000c)
331#define SCC_GSMRL_MODE_DDCMP ((uint)0x00000009)
332#define SCC_GSMRL_MODE_BISYNC ((uint)0x00000008)
333#define SCC_GSMRL_MODE_V14 ((uint)0x00000007)
334#define SCC_GSMRL_MODE_AHDLC ((uint)0x00000006)
335#define SCC_GSMRL_MODE_PROFIBUS ((uint)0x00000005)
336#define SCC_GSMRL_MODE_UART ((uint)0x00000004)
337#define SCC_GSMRL_MODE_SS7 ((uint)0x00000003)
338#define SCC_GSMRL_MODE_ATALK ((uint)0x00000002)
339#define SCC_GSMRL_MODE_HDLC ((uint)0x00000000)
340
341#define SCC_TODR_TOD ((ushort)0x8000)
342
343/* SCC Event and Mask register.
344*/
345#define SCCM_TXE ((unsigned char)0x10)
346#define SCCM_BSY ((unsigned char)0x04)
347#define SCCM_TX ((unsigned char)0x02)
348#define SCCM_RX ((unsigned char)0x01)
349
350typedef struct scc_param {
351 ushort scc_rbase; /* Rx Buffer descriptor base address */
352 ushort scc_tbase; /* Tx Buffer descriptor base address */
353 u_char scc_rfcr; /* Rx function code */
354 u_char scc_tfcr; /* Tx function code */
355 ushort scc_mrblr; /* Max receive buffer length */
356 uint scc_rstate; /* Internal */
357 uint scc_idp; /* Internal */
358 ushort scc_rbptr; /* Internal */
359 ushort scc_ibc; /* Internal */
360 uint scc_rxtmp; /* Internal */
361 uint scc_tstate; /* Internal */
362 uint scc_tdp; /* Internal */
363 ushort scc_tbptr; /* Internal */
364 ushort scc_tbc; /* Internal */
365 uint scc_txtmp; /* Internal */
366 uint scc_rcrc; /* Internal */
367 uint scc_tcrc; /* Internal */
368} sccp_t;
369
370/* Function code bits.
371*/
372#define SCC_EB ((u_char)0x10) /* Set big endian byte order */
373
374/* CPM Ethernet through SCCx.
375 */
376typedef struct scc_enet {
377 sccp_t sen_genscc;
378 uint sen_cpres; /* Preset CRC */
379 uint sen_cmask; /* Constant mask for CRC */
380 uint sen_crcec; /* CRC Error counter */
381 uint sen_alec; /* alignment error counter */
382 uint sen_disfc; /* discard frame counter */
383 ushort sen_pads; /* Tx short frame pad character */
384 ushort sen_retlim; /* Retry limit threshold */
385 ushort sen_retcnt; /* Retry limit counter */
386 ushort sen_maxflr; /* maximum frame length register */
387 ushort sen_minflr; /* minimum frame length register */
388 ushort sen_maxd1; /* maximum DMA1 length */
389 ushort sen_maxd2; /* maximum DMA2 length */
390 ushort sen_maxd; /* Rx max DMA */
391 ushort sen_dmacnt; /* Rx DMA counter */
392 ushort sen_maxb; /* Max BD byte count */
393 ushort sen_gaddr1; /* Group address filter */
394 ushort sen_gaddr2;
395 ushort sen_gaddr3;
396 ushort sen_gaddr4;
397 uint sen_tbuf0data0; /* Save area 0 - current frame */
398 uint sen_tbuf0data1; /* Save area 1 - current frame */
399 uint sen_tbuf0rba; /* Internal */
400 uint sen_tbuf0crc; /* Internal */
401 ushort sen_tbuf0bcnt; /* Internal */
402 ushort sen_paddrh; /* physical address (MSB) */
403 ushort sen_paddrm;
404 ushort sen_paddrl; /* physical address (LSB) */
405 ushort sen_pper; /* persistence */
406 ushort sen_rfbdptr; /* Rx first BD pointer */
407 ushort sen_tfbdptr; /* Tx first BD pointer */
408 ushort sen_tlbdptr; /* Tx last BD pointer */
409 uint sen_tbuf1data0; /* Save area 0 - current frame */
410 uint sen_tbuf1data1; /* Save area 1 - current frame */
411 uint sen_tbuf1rba; /* Internal */
412 uint sen_tbuf1crc; /* Internal */
413 ushort sen_tbuf1bcnt; /* Internal */
414 ushort sen_txlen; /* Tx Frame length counter */
415 ushort sen_iaddr1; /* Individual address filter */
416 ushort sen_iaddr2;
417 ushort sen_iaddr3;
418 ushort sen_iaddr4;
419 ushort sen_boffcnt; /* Backoff counter */
420
421 /* NOTE: Some versions of the manual have the following items
422 * incorrectly documented. Below is the proper order.
423 */
424 ushort sen_taddrh; /* temp address (MSB) */
425 ushort sen_taddrm;
426 ushort sen_taddrl; /* temp address (LSB) */
427} scc_enet_t;
428
429/**********************************************************************
430 *
431 * Board specific configuration settings.
432 *
433 * Please note that we use the presence of a #define SCC_ENET and/or
434 * #define FEC_ENET to enable the SCC resp. FEC ethernet drivers.
435 **********************************************************************/
436
437
438/*** ADS *************************************************************/
439
440#if defined(CONFIG_MPC860) && defined(CONFIG_ADS)
441/* This ENET stuff is for the MPC860ADS with ethernet on SCC1.
442 */
443
444#define PROFF_ENET PROFF_SCC1
445#define CPM_CR_ENET CPM_CR_CH_SCC1
446#define SCC_ENET 0
447
448#define PA_ENET_RXD ((ushort)0x0001)
449#define PA_ENET_TXD ((ushort)0x0002)
450#define PA_ENET_TCLK ((ushort)0x0100)
451#define PA_ENET_RCLK ((ushort)0x0200)
452
453#define PB_ENET_TENA ((uint)0x00001000)
454
455#define PC_ENET_CLSN ((ushort)0x0010)
456#define PC_ENET_RENA ((ushort)0x0020)
457
458#define SICR_ENET_MASK ((uint)0x000000ff)
459#define SICR_ENET_CLKRT ((uint)0x0000002c)
460
461/* 68160 PHY control */
462
463#define PC_ENET_ETHLOOP ((ushort)0x0800)
464#define PC_ENET_TPFLDL ((ushort)0x0400)
465#define PC_ENET_TPSQEL ((ushort)0x0200)
466
467#endif /* MPC860ADS */
468
469/*** AMX860 **********************************************/
470
471#if defined(CONFIG_AMX860)
472
473/* This ENET stuff is for the AMX860 with ethernet on SCC1.
474 */
475
476#define PROFF_ENET PROFF_SCC1
477#define CPM_CR_ENET CPM_CR_CH_SCC1
478#define SCC_ENET 0
479
480#define PA_ENET_RXD ((ushort)0x0001)
481#define PA_ENET_TXD ((ushort)0x0002)
482#define PA_ENET_TCLK ((ushort)0x0400)
483#define PA_ENET_RCLK ((ushort)0x0800)
484
485#define PB_ENET_TENA ((uint)0x00001000)
486
487#define PC_ENET_CLSN ((ushort)0x0010)
488#define PC_ENET_RENA ((ushort)0x0020)
489
490#define SICR_ENET_MASK ((uint)0x000000ff)
491#define SICR_ENET_CLKRT ((uint)0x0000003e)
492
493/* 68160 PHY control */
494
495#define PB_ENET_ETHLOOP ((uint)0x00020000)
496#define PB_ENET_TPFLDL ((uint)0x00010000)
497#define PB_ENET_TPSQEL ((uint)0x00008000)
498#define PD_ENET_ETH_EN ((ushort)0x0004)
499
500#endif /* CONFIG_AMX860 */
501
502/*** BSEIP **********************************************************/
503
504#ifdef CONFIG_BSEIP
505/* This ENET stuff is for the MPC823 with ethernet on SCC2.
506 * This is unique to the BSE ip-Engine board.
507 */
508#define PROFF_ENET PROFF_SCC2
509#define CPM_CR_ENET CPM_CR_CH_SCC2
510#define SCC_ENET 1
511#define PA_ENET_RXD ((ushort)0x0004)
512#define PA_ENET_TXD ((ushort)0x0008)
513#define PA_ENET_TCLK ((ushort)0x0100)
514#define PA_ENET_RCLK ((ushort)0x0200)
515#define PB_ENET_TENA ((uint)0x00002000)
516#define PC_ENET_CLSN ((ushort)0x0040)
517#define PC_ENET_RENA ((ushort)0x0080)
518
519/* BSE uses port B and C bits for PHY control also.
520*/
521#define PB_BSE_POWERUP ((uint)0x00000004)
522#define PB_BSE_FDXDIS ((uint)0x00008000)
523#define PC_BSE_LOOPBACK ((ushort)0x0800)
524
525#define SICR_ENET_MASK ((uint)0x0000ff00)
526#define SICR_ENET_CLKRT ((uint)0x00002c00)
527#endif /* CONFIG_BSEIP */
528
529/*** BSEIP **********************************************************/
530
531#ifdef CONFIG_FLAGADM
532/* Enet configuration for the FLAGADM */
533/* Enet on SCC2 */
534
535#define PROFF_ENET PROFF_SCC2
536#define CPM_CR_ENET CPM_CR_CH_SCC2
537#define SCC_ENET 1
wdenk7c7a23b2002-12-07 00:20:59 +0000538#define PA_ENET_RXD ((ushort)0x0004)
539#define PA_ENET_TXD ((ushort)0x0008)
wdenkfe8c2802002-11-03 00:38:21 +0000540#define PA_ENET_TCLK ((ushort)0x0100)
541#define PA_ENET_RCLK ((ushort)0x0400)
542#define PB_ENET_TENA ((uint)0x00002000)
543#define PC_ENET_CLSN ((ushort)0x0040)
544#define PC_ENET_RENA ((ushort)0x0080)
545
546#define SICR_ENET_MASK ((uint)0x0000ff00)
547#define SICR_ENET_CLKRT ((uint)0x00003400)
548#endif /* CONFIG_FLAGADM */
549
550/*** C2MON **********************************************************/
551
552#ifdef CONFIG_C2MON
553
554# ifndef CONFIG_FEC_ENET /* use SCC for 10Mbps Ethernet */
555# error "Ethernet on SCC not supported on C2MON Board!"
556# else /* Use FEC for Fast Ethernet */
557
558#undef SCC_ENET
559#define FEC_ENET
560
561#define PD_MII_TXD1 ((ushort)0x1000) /* PD 3 */
562#define PD_MII_TXD2 ((ushort)0x0800) /* PD 4 */
563#define PD_MII_TXD3 ((ushort)0x0400) /* PD 5 */
564#define PD_MII_RX_DV ((ushort)0x0200) /* PD 6 */
565#define PD_MII_RX_ERR ((ushort)0x0100) /* PD 7 */
566#define PD_MII_RX_CLK ((ushort)0x0080) /* PD 8 */
567#define PD_MII_TXD0 ((ushort)0x0040) /* PD 9 */
568#define PD_MII_RXD0 ((ushort)0x0020) /* PD 10 */
569#define PD_MII_TX_ERR ((ushort)0x0010) /* PD 11 */
570#define PD_MII_MDC ((ushort)0x0008) /* PD 12 */
571#define PD_MII_RXD1 ((ushort)0x0004) /* PD 13 */
572#define PD_MII_RXD2 ((ushort)0x0002) /* PD 14 */
573#define PD_MII_RXD3 ((ushort)0x0001) /* PD 15 */
574
575#define PD_MII_MASK ((ushort)0x1FFF) /* PD 3...15 */
576
577# endif /* CONFIG_FEC_ENET */
578#endif /* CONFIG_C2MON */
579
580/*********************************************************************/
581
582
583/*** CCM and PCU E ***********************************************/
584
585/* The PCU E and CCM use the FEC on a MPC860T for Ethernet */
586
587#if defined (CONFIG_PCU_E) || defined(CONFIG_CCM)
588
589#define FEC_ENET /* use FEC for EThernet */
590#undef SCC_ENET
591
592#define PD_MII_TXD1 ((ushort)0x1000) /* PD 3 */
593#define PD_MII_TXD2 ((ushort)0x0800) /* PD 4 */
594#define PD_MII_TXD3 ((ushort)0x0400) /* PD 5 */
595#define PD_MII_RX_DV ((ushort)0x0200) /* PD 6 */
596#define PD_MII_RX_ERR ((ushort)0x0100) /* PD 7 */
597#define PD_MII_RX_CLK ((ushort)0x0080) /* PD 8 */
598#define PD_MII_TXD0 ((ushort)0x0040) /* PD 9 */
599#define PD_MII_RXD0 ((ushort)0x0020) /* PD 10 */
600#define PD_MII_TX_ERR ((ushort)0x0010) /* PD 11 */
601#define PD_MII_MDC ((ushort)0x0008) /* PD 12 */
602#define PD_MII_RXD1 ((ushort)0x0004) /* PD 13 */
603#define PD_MII_RXD2 ((ushort)0x0002) /* PD 14 */
604#define PD_MII_RXD3 ((ushort)0x0001) /* PD 15 */
605
606#define PD_MII_MASK ((ushort)0x1FFF) /* PD 3...15 */
607
608#endif /* CONFIG_PCU_E, CONFIG_CCM */
609
wdenk3bac3512003-03-12 10:41:04 +0000610/*** ELPT860 *********************************************************/
611
612#ifdef CONFIG_ELPT860
613/* Bits in parallel I/O port registers that have to be set/cleared
614 * to configure the pins for SCC1 use.
615 */
616# define PROFF_ENET PROFF_SCC1
617# define CPM_CR_ENET CPM_CR_CH_SCC1
618# define SCC_ENET 0
619
620# define PA_ENET_RXD ((ushort)0x0001) /* PA 15 */
621# define PA_ENET_TXD ((ushort)0x0002) /* PA 14 */
622# define PA_ENET_RCLK ((ushort)0x0100) /* PA 7 */
623# define PA_ENET_TCLK ((ushort)0x0200) /* PA 6 */
624
625# define PC_ENET_TENA ((ushort)0x0001) /* PC 15 */
626# define PC_ENET_CLSN ((ushort)0x0010) /* PC 11 */
627# define PC_ENET_RENA ((ushort)0x0020) /* PC 10 */
628
629/* Control bits in the SICR to route TCLK (CLK2) and RCLK (CLK1) to
630 * SCC1. Also, make sure GR1 (bit 24) and SC1 (bit 25) are zero.
631 */
632# define SICR_ENET_MASK ((uint)0x000000FF)
633# define SICR_ENET_CLKRT ((uint)0x00000025)
634#endif /* CONFIG_ELPT860 */
635
wdenkfe8c2802002-11-03 00:38:21 +0000636/*** ESTEEM 192E **************************************************/
637#ifdef CONFIG_ESTEEM192E
638/* ESTEEM192E
639 * This ENET stuff is for the MPC850 with ethernet on SCC2. This
640 * is very similar to the RPX-Lite configuration.
641 * Note TENA , LOOPBACK , FDPLEX_DIS on Port B.
642 */
643
644#define PROFF_ENET PROFF_SCC2
645#define CPM_CR_ENET CPM_CR_CH_SCC2
646#define SCC_ENET 1
647
648#define PA_ENET_RXD ((ushort)0x0004)
649#define PA_ENET_TXD ((ushort)0x0008)
650#define PA_ENET_TCLK ((ushort)0x0200)
651#define PA_ENET_RCLK ((ushort)0x0800)
652#define PB_ENET_TENA ((uint)0x00002000)
653#define PC_ENET_CLSN ((ushort)0x0040)
654#define PC_ENET_RENA ((ushort)0x0080)
655
656#define SICR_ENET_MASK ((uint)0x0000ff00)
657#define SICR_ENET_CLKRT ((uint)0x00003d00)
658
659#define PB_ENET_LOOPBACK ((uint)0x00004000)
660#define PB_ENET_FDPLEX_DIS ((uint)0x00008000)
661
662#endif
663
664/*** FADS823 ********************************************************/
665
666#if defined(CONFIG_MPC823FADS) && defined(CONFIG_FADS)
667/* This ENET stuff is for the MPC823FADS with ethernet on SCC2.
668 */
669#ifdef CONFIG_SCC2_ENET
670#define PROFF_ENET PROFF_SCC2
671#define CPM_CR_ENET CPM_CR_CH_SCC2
672#define SCC_ENET 1
673#define CPMVEC_ENET CPMVEC_SCC2
674#endif
675
676#ifdef CONFIG_SCC1_ENET
677#define PROFF_ENET PROFF_SCC1
678#define CPM_CR_ENET CPM_CR_CH_SCC1
679#define SCC_ENET 0
680#define CPMVEC_ENET CPMVEC_SCC1
681#endif
682
683#define PA_ENET_RXD ((ushort)0x0004)
684#define PA_ENET_TXD ((ushort)0x0008)
685#define PA_ENET_TCLK ((ushort)0x0400)
686#define PA_ENET_RCLK ((ushort)0x0200)
687
688#define PB_ENET_TENA ((uint)0x00002000)
689
690#define PC_ENET_CLSN ((ushort)0x0040)
691#define PC_ENET_RENA ((ushort)0x0080)
692
693#define SICR_ENET_MASK ((uint)0x0000ff00)
694#define SICR_ENET_CLKRT ((uint)0x00002e00)
695
696#endif /* CONFIG_FADS823FADS */
697
698/*** FADS850SAR ********************************************************/
699
700#if defined(CONFIG_MPC850SAR) && defined(CONFIG_FADS)
701/* This ENET stuff is for the MPC850SAR with ethernet on SCC2. Some of
702 * this may be unique to the FADS850SAR configuration.
703 * Note TENA is on Port B.
704 */
705#define PROFF_ENET PROFF_SCC2
706#define CPM_CR_ENET CPM_CR_CH_SCC2
707#define SCC_ENET 1
708#define PA_ENET_RXD ((ushort)0x0004) /* PA 13 */
709#define PA_ENET_TXD ((ushort)0x0008) /* PA 12 */
710#define PA_ENET_RCLK ((ushort)0x0200) /* PA 6 */
711#define PA_ENET_TCLK ((ushort)0x0800) /* PA 4 */
712#define PB_ENET_TENA ((uint)0x00002000) /* PB 18 */
713#define PC_ENET_CLSN ((ushort)0x0040) /* PC 9 */
714#define PC_ENET_RENA ((ushort)0x0080) /* PC 8 */
715
716#define SICR_ENET_MASK ((uint)0x0000ff00)
717#define SICR_ENET_CLKRT ((uint)0x00002f00) /* RCLK-CLK2, TCLK-CLK4 */
718#endif /* CONFIG_FADS850SAR */
719
720/*** FADS860T********************************************************/
721
wdenk180d3f72004-01-04 16:28:35 +0000722#if defined(CONFIG_FADS) && defined(CONFIG_MPC86x)
723/*
724 * This ENET stuff is for the MPC86xFADS/MPC8xxADS with ethernet on SCC1.
wdenkfe8c2802002-11-03 00:38:21 +0000725 */
wdenkfe8c2802002-11-03 00:38:21 +0000726#ifdef CONFIG_SCC1_ENET
wdenk180d3f72004-01-04 16:28:35 +0000727
wdenkfe8c2802002-11-03 00:38:21 +0000728#define SCC_ENET 0
wdenk180d3f72004-01-04 16:28:35 +0000729
wdenkfe8c2802002-11-03 00:38:21 +0000730#define PROFF_ENET PROFF_SCC1
731#define CPM_CR_ENET CPM_CR_CH_SCC1
732
733#define PA_ENET_RXD ((ushort)0x0001)
734#define PA_ENET_TXD ((ushort)0x0002)
735#define PA_ENET_TCLK ((ushort)0x0100)
736#define PA_ENET_RCLK ((ushort)0x0200)
737
738#define PB_ENET_TENA ((uint)0x00001000)
739
740#define PC_ENET_CLSN ((ushort)0x0010)
741#define PC_ENET_RENA ((ushort)0x0020)
742
743#define SICR_ENET_MASK ((uint)0x000000ff)
744#define SICR_ENET_CLKRT ((uint)0x0000002c)
745
wdenk180d3f72004-01-04 16:28:35 +0000746#endif /* CONFIG_SCC1_ETHERNET */
747
748/*
wdenk11142572004-06-06 21:35:06 +0000749 * This ENET stuff is for the MPC860TFADS/MPC86xADS/MPC885ADS
750 * with ethernet on FEC.
wdenkfe8c2802002-11-03 00:38:21 +0000751 */
752
753#ifdef CONFIG_FEC_ENET
wdenk180d3f72004-01-04 16:28:35 +0000754#define FEC_ENET /* Use FEC for Ethernet */
755#endif /* CONFIG_FEC_ENET */
wdenkfe8c2802002-11-03 00:38:21 +0000756
wdenk180d3f72004-01-04 16:28:35 +0000757#endif /* CONFIG_FADS && CONFIG_MPC86x */
wdenkfe8c2802002-11-03 00:38:21 +0000758
wdenk384ae022002-11-05 00:17:55 +0000759/*** FPS850L, FPS860L ************************************************/
wdenkfe8c2802002-11-03 00:38:21 +0000760
wdenk384ae022002-11-05 00:17:55 +0000761#if defined(CONFIG_FPS850L) || defined(CONFIG_FPS860L)
wdenkfe8c2802002-11-03 00:38:21 +0000762/* Bits in parallel I/O port registers that have to be set/cleared
wdenk384ae022002-11-05 00:17:55 +0000763 * to configure the pins for SCC2 use.
wdenkfe8c2802002-11-03 00:38:21 +0000764 */
765#define PROFF_ENET PROFF_SCC2
766#define CPM_CR_ENET CPM_CR_CH_SCC2
767#define SCC_ENET 1
768#define PA_ENET_RXD ((ushort)0x0004) /* PA 13 */
769#define PA_ENET_TXD ((ushort)0x0008) /* PA 12 */
770#define PA_ENET_RCLK ((ushort)0x0100) /* PA 7 */
771#define PA_ENET_TCLK ((ushort)0x0400) /* PA 5 */
772
773#define PC_ENET_TENA ((ushort)0x0002) /* PC 14 */
774#define PC_ENET_CLSN ((ushort)0x0040) /* PC 9 */
775#define PC_ENET_RENA ((ushort)0x0080) /* PC 8 */
776
777/* Control bits in the SICR to route TCLK (CLK2) and RCLK (CLK4) to
778 * SCC2. Also, make sure GR2 (bit 16) and SC2 (bit 17) are zero.
779 */
780#define SICR_ENET_MASK ((uint)0x0000ff00)
781#define SICR_ENET_CLKRT ((uint)0x00002600)
wdenk384ae022002-11-05 00:17:55 +0000782#endif /* CONFIG_FPS850L, CONFIG_FPS860L */
wdenkfe8c2802002-11-03 00:38:21 +0000783
784/*** GEN860T **********************************************************/
785#if defined(CONFIG_GEN860T)
786#undef SCC_ENET
787#define FEC_ENET
788
Wolfgang Denk53677ef2008-05-20 16:00:29 +0200789#define PD_MII_TXD1 ((ushort)0x1000) /* PD 3 */
790#define PD_MII_TXD2 ((ushort)0x0800) /* PD 4 */
791#define PD_MII_TXD3 ((ushort)0x0400) /* PD 5 */
792#define PD_MII_RX_DV ((ushort)0x0200) /* PD 6 */
793#define PD_MII_RX_ERR ((ushort)0x0100) /* PD 7 */
794#define PD_MII_RX_CLK ((ushort)0x0080) /* PD 8 */
795#define PD_MII_TXD0 ((ushort)0x0040) /* PD 9 */
796#define PD_MII_RXD0 ((ushort)0x0020) /* PD 10 */
797#define PD_MII_TX_ERR ((ushort)0x0010) /* PD 11 */
798#define PD_MII_MDC ((ushort)0x0008) /* PD 12 */
799#define PD_MII_RXD1 ((ushort)0x0004) /* PD 13 */
800#define PD_MII_RXD2 ((ushort)0x0002) /* PD 14 */
801#define PD_MII_RXD3 ((ushort)0x0001) /* PD 15 */
wdenkfe8c2802002-11-03 00:38:21 +0000802#define PD_MII_MASK ((ushort)0x1FFF) /* PD 3-15 */
803#endif /* CONFIG_GEN860T */
804
805/*** GENIETV ********************************************************/
806
807#if defined(CONFIG_GENIETV)
808/* Ethernet is only on SCC2 */
809
810#define CONFIG_SCC2_ENET
811#define PROFF_ENET PROFF_SCC2
812#define CPM_CR_ENET CPM_CR_CH_SCC2
813#define SCC_ENET 1
814#define CPMVEC_ENET CPMVEC_SCC2
815
816#define PA_ENET_RXD ((ushort)0x0004) /* PA 13 */
817#define PA_ENET_TXD ((ushort)0x0008) /* PA 12 */
818#define PA_ENET_TCLK ((ushort)0x0400) /* PA 5 */
819#define PA_ENET_RCLK ((ushort)0x0200) /* PA 6 */
820
821#define PB_ENET_TENA ((uint)0x00002000) /* PB 18 */
822
823#define PC_ENET_CLSN ((ushort)0x0040) /* PC 9 */
824#define PC_ENET_RENA ((ushort)0x0080) /* PC 8 */
825
826#define SICR_ENET_MASK ((uint)0x0000ff00)
827#define SICR_ENET_CLKRT ((uint)0x00002e00)
828
829#endif /* CONFIG_GENIETV */
830
831/*** GTH ******************************************************/
832
833#ifdef CONFIG_GTH
834#ifdef CONFIG_FEC_ENET
835#define FEC_ENET /* use FEC for EThernet */
836#endif /* CONFIG_FEC_ETHERNET */
837
838/* This ENET stuff is for GTH 10 Mbit ( SCC ) */
839#define PROFF_ENET PROFF_SCC1
840#define CPM_CR_ENET CPM_CR_CH_SCC1
841#define SCC_ENET 0
842
843#define PA_ENET_RXD ((ushort)0x0001) /* PA15 */
844#define PA_ENET_TXD ((ushort)0x0002) /* PA14 */
845#define PA_ENET_TCLK ((ushort)0x0800) /* PA4 */
846#define PA_ENET_RCLK ((ushort)0x0400) /* PA5 */
847
848#define PB_ENET_TENA ((uint)0x00001000) /* PB19 */
849
850#define PC_ENET_CLSN ((ushort)0x0010) /* PC11 */
851#define PC_ENET_RENA ((ushort)0x0020) /* PC10 */
852
853/* NOTE. This is reset for 10Mbit port only */
854#define PC_ENET_RESET ((ushort)0x0100) /* PC 7 */
855
856#define SICR_ENET_MASK ((uint)0x000000ff)
857
858/* TCLK PA4 -->CLK4, RCLK PA5 -->CLK3 */
859#define SICR_ENET_CLKRT ((uint)0x00000037)
860
861#endif /* CONFIG_GTH */
862
863/*** HERMES-PRO ******************************************************/
864
865/* The HERMES-PRO uses the FEC on a MPC860T for Ethernet */
866
867#ifdef CONFIG_HERMES
868
869#define FEC_ENET /* use FEC for EThernet */
870#undef SCC_ENET
871
872
873#define PD_MII_TXD1 ((ushort)0x1000) /* PD 3 */
874#define PD_MII_TXD2 ((ushort)0x0800) /* PD 4 */
875#define PD_MII_TXD3 ((ushort)0x0400) /* PD 5 */
876#define PD_MII_RX_DV ((ushort)0x0200) /* PD 6 */
877#define PD_MII_RX_ERR ((ushort)0x0100) /* PD 7 */
878#define PD_MII_RX_CLK ((ushort)0x0080) /* PD 8 */
879#define PD_MII_TXD0 ((ushort)0x0040) /* PD 9 */
880#define PD_MII_RXD0 ((ushort)0x0020) /* PD 10 */
881#define PD_MII_TX_ERR ((ushort)0x0010) /* PD 11 */
882#define PD_MII_MDC ((ushort)0x0008) /* PD 12 */
883#define PD_MII_RXD1 ((ushort)0x0004) /* PD 13 */
884#define PD_MII_RXD2 ((ushort)0x0002) /* PD 14 */
885#define PD_MII_RXD3 ((ushort)0x0001) /* PD 15 */
886
887#define PD_MII_MASK ((ushort)0x1FFF) /* PD 3...15 */
888
889#endif /* CONFIG_HERMES */
890
891/*** IAD210 **********************************************************/
892
893/* The IAD210 uses the FEC on a MPC860P for Ethernet */
894
895#if defined(CONFIG_IAD210)
896
897# define FEC_ENET /* use FEC for Ethernet */
898# undef SCC_ENET
899
900# define PD_MII_TXD1 ((ushort) 0x1000 ) /* PD 3 */
901# define PD_MII_TXD2 ((ushort) 0x0800 ) /* PD 4 */
902# define PD_MII_TXD3 ((ushort) 0x0400 ) /* PD 5 */
903# define PD_MII_RX_DV ((ushort) 0x0200 ) /* PD 6 */
904# define PD_MII_RX_ERR ((ushort) 0x0100 ) /* PD 7 */
905# define PD_MII_RX_CLK ((ushort) 0x0080 ) /* PD 8 */
906# define PD_MII_TXD0 ((ushort) 0x0040 ) /* PD 9 */
907# define PD_MII_RXD0 ((ushort) 0x0020 ) /* PD 10 */
908# define PD_MII_TX_ERR ((ushort) 0x0010 ) /* PD 11 */
909# define PD_MII_MDC ((ushort) 0x0008 ) /* PD 12 */
910# define PD_MII_RXD1 ((ushort) 0x0004 ) /* PD 13 */
911# define PD_MII_RXD2 ((ushort) 0x0002 ) /* PD 14 */
912# define PD_MII_RXD3 ((ushort) 0x0001 ) /* PD 15 */
913
914# define PD_MII_MASK ((ushort) 0x1FFF ) /* PD 3...15 */
915
916#endif /* CONFIG_IAD210 */
917
918/*** ICU862 **********************************************************/
919
920#if defined(CONFIG_ICU862)
921
922#ifdef CONFIG_FEC_ENET
923#define FEC_ENET /* use FEC for EThernet */
924#endif /* CONFIG_FEC_ETHERNET */
925
926#endif /* CONFIG_ICU862 */
927
928/*** IP860 **********************************************************/
929
930#if defined(CONFIG_IP860)
931/* Bits in parallel I/O port registers that have to be set/cleared
932 * to configure the pins for SCC1 use.
933 */
934#define PROFF_ENET PROFF_SCC1
935#define CPM_CR_ENET CPM_CR_CH_SCC1
936#define SCC_ENET 0
937#define PA_ENET_RXD ((ushort)0x0001) /* PA 15 */
938#define PA_ENET_TXD ((ushort)0x0002) /* PA 14 */
939#define PA_ENET_RCLK ((ushort)0x0200) /* PA 6 */
940#define PA_ENET_TCLK ((ushort)0x0100) /* PA 7 */
941
942#define PC_ENET_TENA ((ushort)0x0001) /* PC 15 */
943#define PC_ENET_CLSN ((ushort)0x0010) /* PC 11 */
944#define PC_ENET_RENA ((ushort)0x0020) /* PC 10 */
945
946#define PB_ENET_RESET (uint)0x00000008 /* PB 28 */
947#define PB_ENET_JABD (uint)0x00000004 /* PB 29 */
948
949/* Control bits in the SICR to route TCLK (CLK1) and RCLK (CLK2) to
950 * SCC1. Also, make sure GR1 (bit 24) and SC1 (bit 25) are zero.
951 */
952#define SICR_ENET_MASK ((uint)0x000000ff)
953#define SICR_ENET_CLKRT ((uint)0x0000002C)
954#endif /* CONFIG_IP860 */
955
956/*** IVMS8 **********************************************************/
957
958/* The IVMS8 uses the FEC on a MPC860T for Ethernet */
959
960#if defined(CONFIG_IVMS8) || defined(CONFIG_IVML24)
961
962#define FEC_ENET /* use FEC for EThernet */
963#undef SCC_ENET
964
965#define PB_ENET_POWER ((uint)0x00010000) /* PB 15 */
966
967#define PC_ENET_RESET ((ushort)0x0010) /* PC 11 */
968
969#define PD_MII_TXD1 ((ushort)0x1000) /* PD 3 */
970#define PD_MII_TXD2 ((ushort)0x0800) /* PD 4 */
971#define PD_MII_TXD3 ((ushort)0x0400) /* PD 5 */
972#define PD_MII_RX_DV ((ushort)0x0200) /* PD 6 */
973#define PD_MII_RX_ERR ((ushort)0x0100) /* PD 7 */
974#define PD_MII_RX_CLK ((ushort)0x0080) /* PD 8 */
975#define PD_MII_TXD0 ((ushort)0x0040) /* PD 9 */
976#define PD_MII_RXD0 ((ushort)0x0020) /* PD 10 */
977#define PD_MII_TX_ERR ((ushort)0x0010) /* PD 11 */
978#define PD_MII_MDC ((ushort)0x0008) /* PD 12 */
979#define PD_MII_RXD1 ((ushort)0x0004) /* PD 13 */
980#define PD_MII_RXD2 ((ushort)0x0002) /* PD 14 */
981#define PD_MII_RXD3 ((ushort)0x0001) /* PD 15 */
982
983#define PD_MII_MASK ((ushort)0x1FFF) /* PD 3...15 */
984
985#endif /* CONFIG_IVMS8, CONFIG_IVML24 */
986
wdenk0608e042004-03-25 19:29:38 +0000987/*** KUP4K, KUP4X ****************************************************/
988/* The KUP4 boards uses the FEC on a MPC8xx for Ethernet */
wdenk56f94be2002-11-05 16:35:14 +0000989
wdenk0608e042004-03-25 19:29:38 +0000990#if defined(CONFIG_KUP4K) || defined(CONFIG_KUP4X)
wdenk56f94be2002-11-05 16:35:14 +0000991
992#define FEC_ENET /* use FEC for EThernet */
993#undef SCC_ENET
994
995#define PB_ENET_POWER ((uint)0x00010000) /* PB 15 */
996
997#define PC_ENET_RESET ((ushort)0x0010) /* PC 11 */
998
999#define PD_MII_TXD1 ((ushort)0x1000) /* PD 3 */
1000#define PD_MII_TXD2 ((ushort)0x0800) /* PD 4 */
1001#define PD_MII_TXD3 ((ushort)0x0400) /* PD 5 */
1002#define PD_MII_RX_DV ((ushort)0x0200) /* PD 6 */
1003#define PD_MII_RX_ERR ((ushort)0x0100) /* PD 7 */
1004#define PD_MII_RX_CLK ((ushort)0x0080) /* PD 8 */
1005#define PD_MII_TXD0 ((ushort)0x0040) /* PD 9 */
1006#define PD_MII_RXD0 ((ushort)0x0020) /* PD 10 */
1007#define PD_MII_TX_ERR ((ushort)0x0010) /* PD 11 */
1008#define PD_MII_MDC ((ushort)0x0008) /* PD 12 */
1009#define PD_MII_RXD1 ((ushort)0x0004) /* PD 13 */
1010#define PD_MII_RXD2 ((ushort)0x0002) /* PD 14 */
1011#define PD_MII_RXD3 ((ushort)0x0001) /* PD 15 */
1012
1013#define PD_MII_MASK ((ushort)0x1FFF) /* PD 3...15 */
1014
1015#endif /* CONFIG_KUP4K */
1016
1017
wdenkfe8c2802002-11-03 00:38:21 +00001018/*** LANTEC *********************************************************/
1019
1020#if defined(CONFIG_LANTEC) && CONFIG_LANTEC >= 2
1021/* Bits in parallel I/O port registers that have to be set/cleared
1022 * to configure the pins for SCC2 use.
1023 */
1024#define PROFF_ENET PROFF_SCC2
1025#define CPM_CR_ENET CPM_CR_CH_SCC2
1026#define SCC_ENET 1
1027#define PA_ENET_RXD ((ushort)0x0004) /* PA 13 */
1028#define PA_ENET_TXD ((ushort)0x0008) /* PA 12 */
1029#define PA_ENET_RCLK ((ushort)0x0200) /* PA 6 */
1030#define PA_ENET_TCLK ((ushort)0x0400) /* PA 5 */
1031
1032#define PB_ENET_TENA ((uint)0x00002000) /* PB 18 */
1033
1034#define PC_ENET_LBK ((ushort)0x0010) /* PC 11 */
1035#define PC_ENET_CLSN ((ushort)0x0040) /* PC 9 */
1036#define PC_ENET_RENA ((ushort)0x0080) /* PC 8 */
1037
1038/* Control bits in the SICR to route TCLK (CLK3) and RCLK (CLK2) to
1039 * SCC2. Also, make sure GR2 (bit 16) and SC2 (bit 17) are zero.
1040 */
1041#define SICR_ENET_MASK ((uint)0x0000FF00)
1042#define SICR_ENET_CLKRT ((uint)0x00002E00)
1043#endif /* CONFIG_LANTEC v2 */
1044
1045/*** LWMON **********************************************************/
1046
wdenk281e00a2004-08-01 22:48:16 +00001047#if defined(CONFIG_LWMON)
wdenkfe8c2802002-11-03 00:38:21 +00001048/* Bits in parallel I/O port registers that have to be set/cleared
1049 * to configure the pins for SCC2 use.
1050 */
1051#define PROFF_ENET PROFF_SCC2
1052#define CPM_CR_ENET CPM_CR_CH_SCC2
1053#define SCC_ENET 1
1054#define PA_ENET_RXD ((ushort)0x0004) /* PA 13 */
1055#define PA_ENET_TXD ((ushort)0x0008) /* PA 12 */
1056#define PA_ENET_RCLK ((ushort)0x0800) /* PA 4 */
1057#define PA_ENET_TCLK ((ushort)0x0400) /* PA 5 */
1058
1059#define PB_ENET_TENA ((uint)0x00002000) /* PB 18 */
1060
1061#define PC_ENET_CLSN ((ushort)0x0040) /* PC 9 */
1062#define PC_ENET_RENA ((ushort)0x0080) /* PC 8 */
1063
1064/* Control bits in the SICR to route TCLK (CLK3) and RCLK (CLK4) to
1065 * SCC2. Also, make sure GR2 (bit 16) and SC2 (bit 17) are zero.
1066 */
1067#define SICR_ENET_MASK ((uint)0x0000ff00)
1068#define SICR_ENET_CLKRT ((uint)0x00003E00)
1069#endif /* CONFIG_LWMON */
1070
1071/*** NX823 ***********************************************/
1072
1073#if defined(CONFIG_NX823)
1074/* Bits in parallel I/O port registers that have to be set/cleared
1075 * to configure the pins for SCC1 use.
1076 */
1077#define PROFF_ENET PROFF_SCC2
1078#define CPM_CR_ENET CPM_CR_CH_SCC2
1079#define SCC_ENET 1
wdenk7c7a23b2002-12-07 00:20:59 +00001080#define PA_ENET_RXD ((ushort)0x0004) /* PA 13 */
1081#define PA_ENET_TXD ((ushort)0x0008) /* PA 12 */
1082#define PA_ENET_RCLK ((ushort)0x0200) /* PA 6 */
1083#define PA_ENET_TCLK ((ushort)0x0800) /* PA 4 */
wdenkfe8c2802002-11-03 00:38:21 +00001084
wdenk7c7a23b2002-12-07 00:20:59 +00001085#define PB_ENET_TENA ((uint)0x00002000) /* PB 18 */
wdenkfe8c2802002-11-03 00:38:21 +00001086
wdenk7c7a23b2002-12-07 00:20:59 +00001087#define PC_ENET_CLSN ((ushort)0x0040) /* PC 9 */
1088#define PC_ENET_RENA ((ushort)0x0080) /* PC 8 */
wdenkfe8c2802002-11-03 00:38:21 +00001089
1090/* Control bits in the SICR to route TCLK (CLK3) and RCLK (CLK1) to
1091 * SCC2. Also, make sure GR2 (bit 16) and SC2 (bit 17) are zero.
1092 */
wdenk7c7a23b2002-12-07 00:20:59 +00001093#define SICR_ENET_MASK ((uint)0x0000ff00)
1094#define SICR_ENET_CLKRT ((uint)0x00002f00)
wdenkfe8c2802002-11-03 00:38:21 +00001095
1096#endif /* CONFIG_NX823 */
1097
1098/*** MBX ************************************************************/
1099
1100#ifdef CONFIG_MBX
1101/* Bits in parallel I/O port registers that have to be set/cleared
1102 * to configure the pins for SCC1 use. The TCLK and RCLK seem unique
1103 * to the MBX860 board. Any two of the four available clocks could be
1104 * used, and the MPC860 cookbook manual has an example using different
1105 * clock pins.
1106 */
1107#define PROFF_ENET PROFF_SCC1
1108#define CPM_CR_ENET CPM_CR_CH_SCC1
1109#define SCC_ENET 0
1110#define PA_ENET_RXD ((ushort)0x0001)
1111#define PA_ENET_TXD ((ushort)0x0002)
1112#define PA_ENET_TCLK ((ushort)0x0200)
1113#define PA_ENET_RCLK ((ushort)0x0800)
1114#define PC_ENET_TENA ((ushort)0x0001)
1115#define PC_ENET_CLSN ((ushort)0x0010)
1116#define PC_ENET_RENA ((ushort)0x0020)
1117
1118/* Control bits in the SICR to route TCLK (CLK2) and RCLK (CLK4) to
1119 * SCC1. Also, make sure GR1 (bit 24) and SC1 (bit 25) are zero.
1120 */
1121#define SICR_ENET_MASK ((uint)0x000000ff)
1122#define SICR_ENET_CLKRT ((uint)0x0000003d)
1123#endif /* CONFIG_MBX */
1124
Heiko Schocher381e4e62008-01-11 01:12:06 +01001125/*** MGSUVD *********************************************************/
1126
1127/* The MGSUVD Service Module uses SCC3 for Ethernet */
1128
1129#ifdef CONFIG_MGSUVD
1130#define PROFF_ENET PROFF_SCC3 /* Ethernet on SCC3 */
1131#define CPM_CR_ENET CPM_CR_CH_SCC3
1132#define SCC_ENET 2
1133#define PA_ENET_RXD ((ushort)0x0010) /* PA 11 */
1134#define PA_ENET_TXD ((ushort)0x0020) /* PA 10 */
1135#define PA_ENET_RCLK ((ushort)0x1000) /* PA 3 CLK 5 */
1136#define PA_ENET_TCLK ((ushort)0x2000) /* PA 2 CLK 6 */
1137
1138#define PC_ENET_TENA ((ushort)0x0004) /* PC 13 */
1139
1140#define PC_ENET_RENA ((ushort)0x0200) /* PC 6 */
1141#define PC_ENET_CLSN ((ushort)0x0100) /* PC 7 */
1142
1143/* Control bits in the SICR to route TCLK (CLK6) and RCLK (CLK5) to
1144 * SCC3. Also, make sure GR3 (bit 8) and SC3 (bit 9) are zero.
1145 */
1146#define SICR_ENET_MASK ((uint)0x00FF0000)
1147#define SICR_ENET_CLKRT ((uint)0x00250000)
1148#endif /* CONFIG_MGSUVD */
1149
1150
wdenkfe8c2802002-11-03 00:38:21 +00001151/*** MHPC ********************************************************/
1152
1153#if defined(CONFIG_MHPC)
1154/* This ENET stuff is for the MHPC with ethernet on SCC2.
1155 * Note TENA is on Port B.
1156 */
1157#define PROFF_ENET PROFF_SCC2
1158#define CPM_CR_ENET CPM_CR_CH_SCC2
1159#define SCC_ENET 1
1160#define PA_ENET_RXD ((ushort)0x0004) /* PA 13 */
1161#define PA_ENET_TXD ((ushort)0x0008) /* PA 12 */
1162#define PA_ENET_RCLK ((ushort)0x0200) /* PA 6 */
1163#define PA_ENET_TCLK ((ushort)0x0400) /* PA 5 */
1164#define PB_ENET_TENA ((uint)0x00002000) /* PB 18 */
1165#define PC_ENET_CLSN ((ushort)0x0040) /* PC 9 */
1166#define PC_ENET_RENA ((ushort)0x0080) /* PC 8 */
1167
1168#define SICR_ENET_MASK ((uint)0x0000ff00)
1169#define SICR_ENET_CLKRT ((uint)0x00002e00) /* RCLK-CLK2, TCLK-CLK3 */
1170#endif /* CONFIG_MHPC */
1171
wdenk608c9142003-01-13 23:54:46 +00001172/*** NETVIA *******************************************************/
1173
wdenkdc7c9a12003-03-26 06:55:25 +00001174/* SinoVee Microsystems SC8xx series FEL8xx-AT,SC823,SC850,SC855T,SC860T */
1175#if ( defined CONFIG_SVM_SC8xx )
1176# ifndef CONFIG_FEC_ENET
1177
1178#define PROFF_ENET PROFF_SCC2
1179#define CPM_CR_ENET CPM_CR_CH_SCC2
1180#define SCC_ENET 1
1181
1182 /* Bits in parallel I/O port registers that have to be set/cleared
1183 * * * * to configure the pins for SCC2 use.
1184 * * * */
1185#define PA_ENET_RXD ((ushort)0x0004) /* PA 13 */
1186#define PA_ENET_TXD ((ushort)0x0008) /* PA 12 */
1187#define PA_ENET_RCLK ((ushort)0x0400) /* PA 5 */
1188#define PA_ENET_TCLK ((ushort)0x0800) /* PA 4 */
1189
1190#define PB_ENET_TENA ((uint)0x00002000) /* PB 18 */
1191
1192#define PC_ENET_CLSN ((ushort)0x0040) /* PC 9 */
1193#define PC_ENET_RENA ((ushort)0x0080) /* PC 8 */
1194/* Control bits in the SICR to route TCLK (CLK3) and RCLK (CLK1) to
1195 * * * * SCC2. Also, make sure GR2 (bit 16) and SC2 (bit 17) are zero.
1196 * * * */
1197#define SICR_ENET_MASK ((uint)0x0000ff00)
1198#define SICR_ENET_CLKRT ((uint)0x00003700)
1199
1200# else /* Use FEC for Fast Ethernet */
1201
1202#undef SCC_ENET
1203#define FEC_ENET
1204
1205#define PD_MII_TXD1 ((ushort)0x1000) /* PD 3 */
1206#define PD_MII_TXD2 ((ushort)0x0800) /* PD 4 */
1207#define PD_MII_TXD3 ((ushort)0x0400) /* PD 5 */
1208#define PD_MII_RX_DV ((ushort)0x0200) /* PD 6 */
1209#define PD_MII_RX_ERR ((ushort)0x0100) /* PD 7 */
1210#define PD_MII_RX_CLK ((ushort)0x0080) /* PD 8 */
1211#define PD_MII_TXD0 ((ushort)0x0040) /* PD 9 */
1212#define PD_MII_RXD0 ((ushort)0x0020) /* PD 10 */
1213#define PD_MII_TX_ERR ((ushort)0x0010) /* PD 11 */
1214#define PD_MII_MDC ((ushort)0x0008) /* PD 12 */
1215#define PD_MII_RXD1 ((ushort)0x0004) /* PD 13 */
1216#define PD_MII_RXD2 ((ushort)0x0002) /* PD 14 */
1217#define PD_MII_RXD3 ((ushort)0x0001) /* PD 15 */
1218
1219#define PD_MII_MASK ((ushort)0x1FFF) /* PD 3...15 */
1220
1221# endif /* CONFIG_FEC_ENET */
1222#endif /* CONFIG_SVM_SC8xx */
wdenk8bde7f72003-06-27 21:31:46 +00001223
1224
wdenk608c9142003-01-13 23:54:46 +00001225#if defined(CONFIG_NETVIA)
1226/* Bits in parallel I/O port registers that have to be set/cleared
1227 * to configure the pins for SCC2 use.
1228 */
1229#define PROFF_ENET PROFF_SCC2
1230#define CPM_CR_ENET CPM_CR_CH_SCC2
1231#define SCC_ENET 1
1232#define PA_ENET_RXD ((ushort)0x0004) /* PA 13 */
1233#define PA_ENET_TXD ((ushort)0x0008) /* PA 12 */
1234#define PA_ENET_RCLK ((ushort)0x0200) /* PA 6 */
1235#define PA_ENET_TCLK ((ushort)0x0800) /* PA 4 */
1236
wdenk993cad92003-06-26 22:04:09 +00001237#if !defined(CONFIG_NETVIA_VERSION) || CONFIG_NETVIA_VERSION == 1
1238# define PB_ENET_PDN ((ushort)0x4000) /* PB 17 */
1239#elif CONFIG_NETVIA_VERSION >= 2
1240# define PC_ENET_PDN ((ushort)0x0008) /* PC 12 */
1241#endif
1242
wdenk608c9142003-01-13 23:54:46 +00001243#define PB_ENET_TENA ((ushort)0x2000) /* PB 18 */
1244
1245#define PC_ENET_CLSN ((ushort)0x0040) /* PC 9 */
1246#define PC_ENET_RENA ((ushort)0x0080) /* PC 8 */
1247
1248/* Control bits in the SICR to route TCLK (CLK3) and RCLK (CLK1) to
1249 * SCC2. Also, make sure GR2 (bit 16) and SC2 (bit 17) are zero.
1250 */
1251#define SICR_ENET_MASK ((uint)0x0000ff00)
1252#define SICR_ENET_CLKRT ((uint)0x00002f00)
1253
1254#endif /* CONFIG_NETVIA */
1255
wdenk3bbc8992003-12-07 22:27:15 +00001256/*** QS850/QS823 ***************************************************/
1257
1258#if defined(CONFIG_QS850) || defined(CONFIG_QS823)
1259#undef FEC_ENET /* Don't use FEC for EThernet */
1260
1261#define PROFF_ENET PROFF_SCC2
1262#define CPM_CR_ENET CPM_CR_CH_SCC2
1263#define SCC_ENET 1
1264
1265#define PA_ENET_RXD ((ushort)0x0004) /* RXD on PA13 (Pin D9) */
1266#define PA_ENET_TXD ((ushort)0x0008) /* TXD on PA12 (Pin D7) */
1267#define PC_ENET_RENA ((ushort)0x0080) /* RENA on PC8 (Pin D12) */
1268#define PC_ENET_CLSN ((ushort)0x0040) /* CLSN on PC9 (Pin C12) */
1269#define PA_ENET_TCLK ((ushort)0x0200) /* TCLK on PA6 (Pin D8) */
1270#define PA_ENET_RCLK ((ushort)0x0800) /* RCLK on PA4 (Pin D10) */
1271#define PB_ENET_TENA ((uint)0x00002000) /* TENA on PB18 (Pin D11) */
1272#define PC_ENET_LBK ((ushort)0x0010) /* Loopback control on PC11 (Pin B14) */
1273#define PC_ENET_LI ((ushort)0x0020) /* Link Integrity control PC10 (A15) */
1274#define PC_ENET_SQE ((ushort)0x0100) /* SQE Disable control PC7 (B15) */
1275
1276/* SCC2 TXCLK from CLK2
1277 * SCC2 RXCLK from CLK4
1278 * SCC2 Connected to NMSI */
1279#define SICR_ENET_MASK ((uint)0x00007F00)
1280#define SICR_ENET_CLKRT ((uint)0x00003D00)
1281
1282#endif /* CONFIG_QS850/QS823 */
1283
1284/*** QS860T ***************************************************/
1285
1286#ifdef CONFIG_QS860T
1287#ifdef CONFIG_FEC_ENET
1288#define FEC_ENET /* use FEC for EThernet */
1289#endif /* CONFIG_FEC_ETHERNET */
1290
1291/* This ENET stuff is for GTH 10 Mbit ( SCC ) */
1292#define PROFF_ENET PROFF_SCC1
1293#define CPM_CR_ENET CPM_CR_CH_SCC1
1294#define SCC_ENET 0
1295
1296#define PA_ENET_RXD ((ushort)0x0001) /* PA15 */
1297#define PA_ENET_TXD ((ushort)0x0002) /* PA14 */
1298#define PA_ENET_TCLK ((ushort)0x0800) /* PA4 */
1299#define PA_ENET_RCLK ((ushort)0x0200) /* PA6 */
1300#define PB_ENET_TENA ((uint)0x00001000) /* PB19 */
1301#define PC_ENET_CLSN ((ushort)0x0010) /* PC11 */
1302#define PC_ENET_RENA ((ushort)0x0020) /* PC10 */
1303
1304#define SICR_ENET_MASK ((uint)0x000000ff)
1305/* RCLK PA4 -->CLK4, TCLK PA6 -->CLK2 */
1306#define SICR_ENET_CLKRT ((uint)0x0000003D)
1307
1308#endif /* CONFIG_QS860T */
1309
wdenkfe8c2802002-11-03 00:38:21 +00001310/*** RPXCLASSIC *****************************************************/
1311
1312#ifdef CONFIG_RPXCLASSIC
1313
1314#ifdef CONFIG_FEC_ENET
1315
1316# define FEC_ENET /* use FEC for EThernet */
1317# undef SCC_ENET
1318
1319#else /* ! CONFIG_FEC_ENET */
1320
1321/* Bits in parallel I/O port registers that have to be set/cleared
1322 * to configure the pins for SCC1 use.
1323 */
1324#define PROFF_ENET PROFF_SCC1
1325#define CPM_CR_ENET CPM_CR_CH_SCC1
1326#define SCC_ENET 0
1327#define PA_ENET_RXD ((ushort)0x0001)
1328#define PA_ENET_TXD ((ushort)0x0002)
1329#define PA_ENET_TCLK ((ushort)0x0200)
1330#define PA_ENET_RCLK ((ushort)0x0800)
1331#define PB_ENET_TENA ((uint)0x00001000)
1332#define PC_ENET_CLSN ((ushort)0x0010)
1333#define PC_ENET_RENA ((ushort)0x0020)
1334
1335/* Control bits in the SICR to route TCLK (CLK2) and RCLK (CLK4) to
1336 * SCC1. Also, make sure GR1 (bit 24) and SC1 (bit 25) are zero.
1337 */
1338#define SICR_ENET_MASK ((uint)0x000000ff)
1339#define SICR_ENET_CLKRT ((uint)0x0000003d)
1340
1341#endif /* CONFIG_FEC_ENET */
1342
1343#endif /* CONFIG_RPXCLASSIC */
1344
1345/*** RPXLITE ********************************************************/
1346
1347#ifdef CONFIG_RPXLITE
1348/* This ENET stuff is for the MPC850 with ethernet on SCC2. Some of
1349 * this may be unique to the RPX-Lite configuration.
1350 * Note TENA is on Port B.
1351 */
1352#define PROFF_ENET PROFF_SCC2
1353#define CPM_CR_ENET CPM_CR_CH_SCC2
1354#define SCC_ENET 1
1355#define PA_ENET_RXD ((ushort)0x0004)
1356#define PA_ENET_TXD ((ushort)0x0008)
1357#define PA_ENET_TCLK ((ushort)0x0200)
1358#define PA_ENET_RCLK ((ushort)0x0800)
wdenk73a8b272003-06-05 19:27:42 +00001359#if defined(CONFIG_RMU)
1360#define PC_ENET_TENA ((uint)0x00000002) /* PC14 */
1361#else
wdenkfe8c2802002-11-03 00:38:21 +00001362#define PB_ENET_TENA ((uint)0x00002000)
wdenk73a8b272003-06-05 19:27:42 +00001363#endif
wdenkfe8c2802002-11-03 00:38:21 +00001364#define PC_ENET_CLSN ((ushort)0x0040)
1365#define PC_ENET_RENA ((ushort)0x0080)
1366
1367#define SICR_ENET_MASK ((uint)0x0000ff00)
1368#define SICR_ENET_CLKRT ((uint)0x00003d00)
1369#endif /* CONFIG_RPXLITE */
1370
1371/*** SM850 *********************************************************/
1372
1373/* The SM850 Service Module uses SCC2 for IrDA and SCC3 for Ethernet */
1374
1375#ifdef CONFIG_SM850
1376#define PROFF_ENET PROFF_SCC3 /* Ethernet on SCC3 */
1377#define CPM_CR_ENET CPM_CR_CH_SCC3
1378#define SCC_ENET 2
1379#define PB_ENET_RXD ((uint)0x00000004) /* PB 29 */
1380#define PB_ENET_TXD ((uint)0x00000002) /* PB 30 */
1381#define PA_ENET_RCLK ((ushort)0x0100) /* PA 7 */
1382#define PA_ENET_TCLK ((ushort)0x0400) /* PA 5 */
1383
1384#define PC_ENET_LBK ((ushort)0x0008) /* PC 12 */
1385#define PC_ENET_TENA ((ushort)0x0004) /* PC 13 */
1386
1387#define PC_ENET_RENA ((ushort)0x0800) /* PC 4 */
1388#define PC_ENET_CLSN ((ushort)0x0400) /* PC 5 */
1389
1390/* Control bits in the SICR to route TCLK (CLK3) and RCLK (CLK1) to
1391 * SCC3. Also, make sure GR3 (bit 8) and SC3 (bit 9) are zero.
1392 */
1393#define SICR_ENET_MASK ((uint)0x00FF0000)
1394#define SICR_ENET_CLKRT ((uint)0x00260000)
1395#endif /* CONFIG_SM850 */
1396
1397/*** SPD823TS ******************************************************/
1398
1399#ifdef CONFIG_SPD823TS
1400/* Bits in parallel I/O port registers that have to be set/cleared
1401 * to configure the pins for SCC2 use.
1402 */
1403#define PROFF_ENET PROFF_SCC2 /* Ethernet on SCC2 */
1404#define CPM_CR_ENET CPM_CR_CH_SCC2
1405#define SCC_ENET 1
1406#define PA_ENET_MDC ((ushort)0x0001) /* PA 15 !!! */
1407#define PA_ENET_MDIO ((ushort)0x0002) /* PA 14 !!! */
1408#define PA_ENET_RXD ((ushort)0x0004) /* PA 13 */
1409#define PA_ENET_TXD ((ushort)0x0008) /* PA 12 */
1410#define PA_ENET_RCLK ((ushort)0x0200) /* PA 6 */
1411#define PA_ENET_TCLK ((ushort)0x0400) /* PA 5 */
1412
1413#define PB_ENET_TENA ((uint)0x00002000) /* PB 18 */
1414
1415#define PC_ENET_CLSN ((ushort)0x0040) /* PC 9 */
1416#define PC_ENET_RENA ((ushort)0x0080) /* PC 8 */
1417#define PC_ENET_RESET ((ushort)0x0100) /* PC 7 !!! */
1418
1419/* Control bits in the SICR to route TCLK (CLK3) and RCLK (CLK2) to
1420 * SCC2. Also, make sure GR2 (bit 16) and SC2 (bit 17) are zero.
1421 */
1422#define SICR_ENET_MASK ((uint)0x0000ff00)
1423#define SICR_ENET_CLKRT ((uint)0x00002E00)
1424#endif /* CONFIG_SPD823TS */
1425
1426/*** SXNI855T ******************************************************/
1427
1428#if defined(CONFIG_SXNI855T)
1429
1430#ifdef CONFIG_FEC_ENET
1431#define FEC_ENET /* use FEC for Ethernet */
1432#endif /* CONFIG_FEC_ETHERNET */
1433
1434#endif /* CONFIG_SXNI855T */
1435
Markus Klotzbuecher090eb732006-07-12 15:26:01 +02001436/*** MVS1, TQM823L/M, TQM850L/M, TQM885D, ETX094, R360MPI **********/
wdenkfe8c2802002-11-03 00:38:21 +00001437
1438#if (defined(CONFIG_MVS) && CONFIG_MVS < 2) || \
wdenk71f95112003-06-15 22:40:42 +00001439 defined(CONFIG_R360MPI) || defined(CONFIG_RBC823) || \
1440 defined(CONFIG_TQM823L) || defined(CONFIG_TQM823M) || \
1441 defined(CONFIG_TQM850L) || defined(CONFIG_TQM850M) || \
Markus Klotzbuecher090eb732006-07-12 15:26:01 +02001442 defined(CONFIG_TQM885D) || defined(CONFIG_ETX094) || \
1443 defined(CONFIG_RRVISION)|| defined(CONFIG_VIRTLAB2)|| \
wdenkfe8c2802002-11-03 00:38:21 +00001444 (defined(CONFIG_LANTEC) && CONFIG_LANTEC < 2)
Markus Klotzbuecher090eb732006-07-12 15:26:01 +02001445
wdenkfe8c2802002-11-03 00:38:21 +00001446/* Bits in parallel I/O port registers that have to be set/cleared
1447 * to configure the pins for SCC2 use.
1448 */
1449#define PROFF_ENET PROFF_SCC2
1450#define CPM_CR_ENET CPM_CR_CH_SCC2
Wolfgang Denk2b4f7782008-01-15 17:21:28 +01001451#if (!defined(CONFIG_TK885D)) /* TK885D does not use SCC Ethernet */
wdenkfe8c2802002-11-03 00:38:21 +00001452#define SCC_ENET 1
Wolfgang Denk2b4f7782008-01-15 17:21:28 +01001453#endif
wdenkfe8c2802002-11-03 00:38:21 +00001454#define PA_ENET_RXD ((ushort)0x0004) /* PA 13 */
1455#define PA_ENET_TXD ((ushort)0x0008) /* PA 12 */
1456#define PA_ENET_RCLK ((ushort)0x0100) /* PA 7 */
1457#define PA_ENET_TCLK ((ushort)0x0400) /* PA 5 */
1458
1459#define PB_ENET_TENA ((uint)0x00002000) /* PB 18 */
1460
1461#define PC_ENET_CLSN ((ushort)0x0040) /* PC 9 */
1462#define PC_ENET_RENA ((ushort)0x0080) /* PC 8 */
1463#if defined(CONFIG_R360MPI)
1464#define PC_ENET_LBK ((ushort)0x0008) /* PC 12 */
1465#endif /* CONFIG_R360MPI */
1466
1467/* Control bits in the SICR to route TCLK (CLK3) and RCLK (CLK1) to
1468 * SCC2. Also, make sure GR2 (bit 16) and SC2 (bit 17) are zero.
1469 */
1470#define SICR_ENET_MASK ((uint)0x0000ff00)
1471#define SICR_ENET_CLKRT ((uint)0x00002600)
Markus Klotzbuecher090eb732006-07-12 15:26:01 +02001472
1473# ifdef CONFIG_FEC_ENET /* Use FEC for Fast Ethernet */
1474#define FEC_ENET
1475# endif /* CONFIG_FEC_ENET */
1476
wdenk71f95112003-06-15 22:40:42 +00001477#endif /* CONFIG_MVS v1, CONFIG_TQM823L/M, CONFIG_TQM850L/M, etc. */
wdenkfe8c2802002-11-03 00:38:21 +00001478
wdenkd4ca31c2004-01-02 14:00:00 +00001479/*** TQM855L/M, TQM860L/M, TQM862L/M, TQM866L/M *********************/
wdenkfe8c2802002-11-03 00:38:21 +00001480
wdenk71f95112003-06-15 22:40:42 +00001481#if defined(CONFIG_TQM855L) || defined(CONFIG_TQM855M) || \
1482 defined(CONFIG_TQM860L) || defined(CONFIG_TQM860M) || \
wdenkd4ca31c2004-01-02 14:00:00 +00001483 defined(CONFIG_TQM862L) || defined(CONFIG_TQM862M) || \
1484 defined(CONFIG_TQM866L) || defined(CONFIG_TQM866M)
wdenkfe8c2802002-11-03 00:38:21 +00001485
1486# ifdef CONFIG_SCC1_ENET /* use SCC for 10Mbps Ethernet */
1487
1488/* Bits in parallel I/O port registers that have to be set/cleared
1489 * to configure the pins for SCC1 use.
1490 */
1491#define PROFF_ENET PROFF_SCC1
1492#define CPM_CR_ENET CPM_CR_CH_SCC1
1493#define SCC_ENET 0
1494#define PA_ENET_RXD ((ushort)0x0001) /* PA 15 */
1495#define PA_ENET_TXD ((ushort)0x0002) /* PA 14 */
1496#define PA_ENET_RCLK ((ushort)0x0100) /* PA 7 */
1497#define PA_ENET_TCLK ((ushort)0x0400) /* PA 5 */
1498
1499#define PC_ENET_TENA ((ushort)0x0001) /* PC 15 */
1500#define PC_ENET_CLSN ((ushort)0x0010) /* PC 11 */
1501#define PC_ENET_RENA ((ushort)0x0020) /* PC 10 */
1502
1503/* Control bits in the SICR to route TCLK (CLK3) and RCLK (CLK1) to
1504 * SCC1. Also, make sure GR1 (bit 24) and SC1 (bit 25) are zero.
1505 */
1506#define SICR_ENET_MASK ((uint)0x000000ff)
1507#define SICR_ENET_CLKRT ((uint)0x00000026)
1508
1509# endif /* CONFIG_SCC1_ENET */
1510
1511# ifdef CONFIG_FEC_ENET /* Use FEC for Fast Ethernet */
1512
1513#define FEC_ENET
1514
1515#define PD_MII_TXD1 ((ushort)0x1000) /* PD 3 */
1516#define PD_MII_TXD2 ((ushort)0x0800) /* PD 4 */
1517#define PD_MII_TXD3 ((ushort)0x0400) /* PD 5 */
1518#define PD_MII_RX_DV ((ushort)0x0200) /* PD 6 */
1519#define PD_MII_RX_ERR ((ushort)0x0100) /* PD 7 */
1520#define PD_MII_RX_CLK ((ushort)0x0080) /* PD 8 */
1521#define PD_MII_TXD0 ((ushort)0x0040) /* PD 9 */
1522#define PD_MII_RXD0 ((ushort)0x0020) /* PD 10 */
1523#define PD_MII_TX_ERR ((ushort)0x0010) /* PD 11 */
1524#define PD_MII_MDC ((ushort)0x0008) /* PD 12 */
1525#define PD_MII_RXD1 ((ushort)0x0004) /* PD 13 */
1526#define PD_MII_RXD2 ((ushort)0x0002) /* PD 14 */
1527#define PD_MII_RXD3 ((ushort)0x0001) /* PD 15 */
1528
1529#define PD_MII_MASK ((ushort)0x1FFF) /* PD 3...15 */
1530
1531# endif /* CONFIG_FEC_ENET */
wdenk71f95112003-06-15 22:40:42 +00001532#endif /* CONFIG_TQM855L/M, TQM860L/M, TQM862L/M */
wdenkfe8c2802002-11-03 00:38:21 +00001533
wdenk608c9142003-01-13 23:54:46 +00001534/*** V37 **********************************************************/
1535
1536#ifdef CONFIG_V37
1537/* This ENET stuff is for the MPC823 with ethernet on SCC2. Some of
1538 * this may be unique to the Marel V37 configuration.
1539 * Note TENA is on Port B.
wdenkfe8c2802002-11-03 00:38:21 +00001540 */
1541#define PROFF_ENET PROFF_SCC2
1542#define CPM_CR_ENET CPM_CR_CH_SCC2
1543#define SCC_ENET 1
wdenk608c9142003-01-13 23:54:46 +00001544#define PA_ENET_RXD ((ushort)0x0004)
1545#define PA_ENET_TXD ((ushort)0x0008)
1546#define PA_ENET_TCLK ((ushort)0x0400)
1547#define PA_ENET_RCLK ((ushort)0x0200)
1548#define PB_ENET_TENA ((uint)0x00002000)
1549#define PC_ENET_CLSN ((ushort)0x0040)
1550#define PC_ENET_RENA ((ushort)0x0080)
wdenkfe8c2802002-11-03 00:38:21 +00001551
wdenkfe8c2802002-11-03 00:38:21 +00001552#define SICR_ENET_MASK ((uint)0x0000ff00)
wdenk608c9142003-01-13 23:54:46 +00001553#define SICR_ENET_CLKRT ((uint)0x00002e00)
1554#endif /* CONFIG_V37 */
wdenkfe8c2802002-11-03 00:38:21 +00001555
wdenk3bbc8992003-12-07 22:27:15 +00001556
wdenkfe8c2802002-11-03 00:38:21 +00001557/*********************************************************************/
1558
1559/* SCC Event register as used by Ethernet.
1560*/
1561#define SCCE_ENET_GRA ((ushort)0x0080) /* Graceful stop complete */
1562#define SCCE_ENET_TXE ((ushort)0x0010) /* Transmit Error */
1563#define SCCE_ENET_RXF ((ushort)0x0008) /* Full frame received */
1564#define SCCE_ENET_BSY ((ushort)0x0004) /* All incoming buffers full */
1565#define SCCE_ENET_TXB ((ushort)0x0002) /* A buffer was transmitted */
1566#define SCCE_ENET_RXB ((ushort)0x0001) /* A buffer was received */
1567
1568/* SCC Mode Register (PSMR) as used by Ethernet.
1569*/
1570#define SCC_PSMR_HBC ((ushort)0x8000) /* Enable heartbeat */
1571#define SCC_PSMR_FC ((ushort)0x4000) /* Force collision */
1572#define SCC_PSMR_RSH ((ushort)0x2000) /* Receive short frames */
1573#define SCC_PSMR_IAM ((ushort)0x1000) /* Check individual hash */
1574#define SCC_PSMR_ENCRC ((ushort)0x0800) /* Ethernet CRC mode */
1575#define SCC_PSMR_PRO ((ushort)0x0200) /* Promiscuous mode */
1576#define SCC_PSMR_BRO ((ushort)0x0100) /* Catch broadcast pkts */
1577#define SCC_PSMR_SBT ((ushort)0x0080) /* Special backoff timer */
1578#define SCC_PSMR_LPB ((ushort)0x0040) /* Set Loopback mode */
1579#define SCC_PSMR_SIP ((ushort)0x0020) /* Sample Input Pins */
1580#define SCC_PSMR_LCW ((ushort)0x0010) /* Late collision window */
1581#define SCC_PSMR_NIB22 ((ushort)0x000a) /* Start frame search */
1582#define SCC_PSMR_FDE ((ushort)0x0001) /* Full duplex enable */
1583
1584/* Buffer descriptor control/status used by Ethernet receive.
1585*/
1586#define BD_ENET_RX_EMPTY ((ushort)0x8000)
1587#define BD_ENET_RX_WRAP ((ushort)0x2000)
1588#define BD_ENET_RX_INTR ((ushort)0x1000)
1589#define BD_ENET_RX_LAST ((ushort)0x0800)
1590#define BD_ENET_RX_FIRST ((ushort)0x0400)
1591#define BD_ENET_RX_MISS ((ushort)0x0100)
1592#define BD_ENET_RX_LG ((ushort)0x0020)
1593#define BD_ENET_RX_NO ((ushort)0x0010)
1594#define BD_ENET_RX_SH ((ushort)0x0008)
1595#define BD_ENET_RX_CR ((ushort)0x0004)
1596#define BD_ENET_RX_OV ((ushort)0x0002)
1597#define BD_ENET_RX_CL ((ushort)0x0001)
1598#define BD_ENET_RX_STATS ((ushort)0x013f) /* All status bits */
1599
1600/* Buffer descriptor control/status used by Ethernet transmit.
1601*/
1602#define BD_ENET_TX_READY ((ushort)0x8000)
1603#define BD_ENET_TX_PAD ((ushort)0x4000)
1604#define BD_ENET_TX_WRAP ((ushort)0x2000)
1605#define BD_ENET_TX_INTR ((ushort)0x1000)
1606#define BD_ENET_TX_LAST ((ushort)0x0800)
1607#define BD_ENET_TX_TC ((ushort)0x0400)
1608#define BD_ENET_TX_DEF ((ushort)0x0200)
1609#define BD_ENET_TX_HB ((ushort)0x0100)
1610#define BD_ENET_TX_LC ((ushort)0x0080)
1611#define BD_ENET_TX_RL ((ushort)0x0040)
1612#define BD_ENET_TX_RCMASK ((ushort)0x003c)
1613#define BD_ENET_TX_UN ((ushort)0x0002)
1614#define BD_ENET_TX_CSL ((ushort)0x0001)
1615#define BD_ENET_TX_STATS ((ushort)0x03ff) /* All status bits */
1616
1617/* SCC as UART
1618*/
1619typedef struct scc_uart {
1620 sccp_t scc_genscc;
1621 uint scc_res1; /* Reserved */
1622 uint scc_res2; /* Reserved */
1623 ushort scc_maxidl; /* Maximum idle chars */
1624 ushort scc_idlc; /* temp idle counter */
1625 ushort scc_brkcr; /* Break count register */
1626 ushort scc_parec; /* receive parity error counter */
1627 ushort scc_frmec; /* receive framing error counter */
1628 ushort scc_nosec; /* receive noise counter */
1629 ushort scc_brkec; /* receive break condition counter */
1630 ushort scc_brkln; /* last received break length */
1631 ushort scc_uaddr1; /* UART address character 1 */
1632 ushort scc_uaddr2; /* UART address character 2 */
1633 ushort scc_rtemp; /* Temp storage */
1634 ushort scc_toseq; /* Transmit out of sequence char */
1635 ushort scc_char1; /* control character 1 */
1636 ushort scc_char2; /* control character 2 */
1637 ushort scc_char3; /* control character 3 */
1638 ushort scc_char4; /* control character 4 */
1639 ushort scc_char5; /* control character 5 */
1640 ushort scc_char6; /* control character 6 */
1641 ushort scc_char7; /* control character 7 */
1642 ushort scc_char8; /* control character 8 */
1643 ushort scc_rccm; /* receive control character mask */
1644 ushort scc_rccr; /* receive control character register */
1645 ushort scc_rlbc; /* receive last break character */
1646} scc_uart_t;
1647
1648/* SCC Event and Mask registers when it is used as a UART.
1649*/
1650#define UART_SCCM_GLR ((ushort)0x1000)
1651#define UART_SCCM_GLT ((ushort)0x0800)
1652#define UART_SCCM_AB ((ushort)0x0200)
1653#define UART_SCCM_IDL ((ushort)0x0100)
1654#define UART_SCCM_GRA ((ushort)0x0080)
1655#define UART_SCCM_BRKE ((ushort)0x0040)
1656#define UART_SCCM_BRKS ((ushort)0x0020)
1657#define UART_SCCM_CCR ((ushort)0x0008)
1658#define UART_SCCM_BSY ((ushort)0x0004)
1659#define UART_SCCM_TX ((ushort)0x0002)
1660#define UART_SCCM_RX ((ushort)0x0001)
1661
1662/* The SCC PSMR when used as a UART.
1663*/
1664#define SCU_PSMR_FLC ((ushort)0x8000)
1665#define SCU_PSMR_SL ((ushort)0x4000)
1666#define SCU_PSMR_CL ((ushort)0x3000)
1667#define SCU_PSMR_UM ((ushort)0x0c00)
1668#define SCU_PSMR_FRZ ((ushort)0x0200)
1669#define SCU_PSMR_RZS ((ushort)0x0100)
1670#define SCU_PSMR_SYN ((ushort)0x0080)
1671#define SCU_PSMR_DRT ((ushort)0x0040)
1672#define SCU_PSMR_PEN ((ushort)0x0010)
1673#define SCU_PSMR_RPM ((ushort)0x000c)
1674#define SCU_PSMR_REVP ((ushort)0x0008)
1675#define SCU_PSMR_TPM ((ushort)0x0003)
1676#define SCU_PSMR_TEVP ((ushort)0x0003)
1677
1678/* CPM Transparent mode SCC.
1679 */
1680typedef struct scc_trans {
1681 sccp_t st_genscc;
1682 uint st_cpres; /* Preset CRC */
1683 uint st_cmask; /* Constant mask for CRC */
1684} scc_trans_t;
1685
1686#define BD_SCC_TX_LAST ((ushort)0x0800)
1687
1688/* IIC parameter RAM.
1689*/
1690typedef struct iic {
1691 ushort iic_rbase; /* Rx Buffer descriptor base address */
1692 ushort iic_tbase; /* Tx Buffer descriptor base address */
1693 u_char iic_rfcr; /* Rx function code */
1694 u_char iic_tfcr; /* Tx function code */
1695 ushort iic_mrblr; /* Max receive buffer length */
1696 uint iic_rstate; /* Internal */
1697 uint iic_rdp; /* Internal */
1698 ushort iic_rbptr; /* Internal */
1699 ushort iic_rbc; /* Internal */
1700 uint iic_rxtmp; /* Internal */
1701 uint iic_tstate; /* Internal */
1702 uint iic_tdp; /* Internal */
1703 ushort iic_tbptr; /* Internal */
1704 ushort iic_tbc; /* Internal */
1705 uint iic_txtmp; /* Internal */
1706 uint iic_res; /* reserved */
1707 ushort iic_rpbase; /* Relocation pointer */
1708 ushort iic_res2; /* reserved */
1709} iic_t;
1710
1711/* SPI parameter RAM.
1712*/
1713typedef struct spi {
1714 ushort spi_rbase; /* Rx Buffer descriptor base address */
1715 ushort spi_tbase; /* Tx Buffer descriptor base address */
1716 u_char spi_rfcr; /* Rx function code */
1717 u_char spi_tfcr; /* Tx function code */
1718 ushort spi_mrblr; /* Max receive buffer length */
1719 uint spi_rstate; /* Internal */
1720 uint spi_rdp; /* Internal */
1721 ushort spi_rbptr; /* Internal */
1722 ushort spi_rbc; /* Internal */
1723 uint spi_rxtmp; /* Internal */
1724 uint spi_tstate; /* Internal */
1725 uint spi_tdp; /* Internal */
1726 ushort spi_tbptr; /* Internal */
1727 ushort spi_tbc; /* Internal */
1728 uint spi_txtmp; /* Internal */
1729 uint spi_res;
1730 ushort spi_rpbase; /* Relocation pointer */
1731 ushort spi_res2;
1732} spi_t;
1733
1734/* SPI Mode register.
1735*/
1736#define SPMODE_LOOP ((ushort)0x4000) /* Loopback */
1737#define SPMODE_CI ((ushort)0x2000) /* Clock Invert */
1738#define SPMODE_CP ((ushort)0x1000) /* Clock Phase */
1739#define SPMODE_DIV16 ((ushort)0x0800) /* BRG/16 mode */
1740#define SPMODE_REV ((ushort)0x0400) /* Reversed Data */
1741#define SPMODE_MSTR ((ushort)0x0200) /* SPI Master */
1742#define SPMODE_EN ((ushort)0x0100) /* Enable */
1743#define SPMODE_LENMSK ((ushort)0x00f0) /* character length */
1744#define SPMODE_PMMSK ((ushort)0x000f) /* prescale modulus */
1745
1746#define SPMODE_LEN(x) ((((x)-1)&0xF)<<4)
1747#define SPMODE_PM(x) ((x) &0xF)
1748
1749/* HDLC parameter RAM.
1750*/
1751
1752typedef struct hdlc_pram_s {
1753 /*
1754 * SCC parameter RAM
1755 */
1756 ushort rbase; /* Rx Buffer descriptor base address */
1757 ushort tbase; /* Tx Buffer descriptor base address */
1758 uchar rfcr; /* Rx function code */
1759 uchar tfcr; /* Tx function code */
1760 ushort mrblr; /* Rx buffer length */
1761 ulong rstate; /* Rx internal state */
1762 ulong rptr; /* Rx internal data pointer */
1763 ushort rbptr; /* rb BD Pointer */
1764 ushort rcount; /* Rx internal byte count */
1765 ulong rtemp; /* Rx temp */
1766 ulong tstate; /* Tx internal state */
1767 ulong tptr; /* Tx internal data pointer */
1768 ushort tbptr; /* Tx BD pointer */
1769 ushort tcount; /* Tx byte count */
1770 ulong ttemp; /* Tx temp */
1771 ulong rcrc; /* temp receive CRC */
1772 ulong tcrc; /* temp transmit CRC */
1773 /*
1774 * HDLC specific parameter RAM
1775 */
1776 uchar res[4]; /* reserved */
1777 ulong c_mask; /* CRC constant */
1778 ulong c_pres; /* CRC preset */
1779 ushort disfc; /* discarded frame counter */
1780 ushort crcec; /* CRC error counter */
1781 ushort abtsc; /* abort sequence counter */
1782 ushort nmarc; /* nonmatching address rx cnt */
1783 ushort retrc; /* frame retransmission cnt */
1784 ushort mflr; /* maximum frame length reg */
1785 ushort max_cnt; /* maximum length counter */
1786 ushort rfthr; /* received frames threshold */
1787 ushort rfcnt; /* received frames count */
1788 ushort hmask; /* user defined frm addr mask */
1789 ushort haddr1; /* user defined frm address 1 */
1790 ushort haddr2; /* user defined frm address 2 */
1791 ushort haddr3; /* user defined frm address 3 */
1792 ushort haddr4; /* user defined frm address 4 */
1793 ushort tmp; /* temp */
1794 ushort tmp_mb; /* temp */
1795} hdlc_pram_t;
1796
1797/* CPM interrupts. There are nearly 32 interrupts generated by CPM
1798 * channels or devices. All of these are presented to the PPC core
1799 * as a single interrupt. The CPM interrupt handler dispatches its
1800 * own handlers, in a similar fashion to the PPC core handler. We
1801 * use the table as defined in the manuals (i.e. no special high
1802 * priority and SCC1 == SCCa, etc...).
1803 */
1804#define CPMVEC_NR 32
wdenk7c7a23b2002-12-07 00:20:59 +00001805#define CPMVEC_OFFSET 0x00010000
1806#define CPMVEC_PIO_PC15 ((ushort)0x1f | CPMVEC_OFFSET)
1807#define CPMVEC_SCC1 ((ushort)0x1e | CPMVEC_OFFSET)
1808#define CPMVEC_SCC2 ((ushort)0x1d | CPMVEC_OFFSET)
1809#define CPMVEC_SCC3 ((ushort)0x1c | CPMVEC_OFFSET)
1810#define CPMVEC_SCC4 ((ushort)0x1b | CPMVEC_OFFSET)
1811#define CPMVEC_PIO_PC14 ((ushort)0x1a | CPMVEC_OFFSET)
1812#define CPMVEC_TIMER1 ((ushort)0x19 | CPMVEC_OFFSET)
1813#define CPMVEC_PIO_PC13 ((ushort)0x18 | CPMVEC_OFFSET)
1814#define CPMVEC_PIO_PC12 ((ushort)0x17 | CPMVEC_OFFSET)
1815#define CPMVEC_SDMA_CB_ERR ((ushort)0x16 | CPMVEC_OFFSET)
1816#define CPMVEC_IDMA1 ((ushort)0x15 | CPMVEC_OFFSET)
1817#define CPMVEC_IDMA2 ((ushort)0x14 | CPMVEC_OFFSET)
1818#define CPMVEC_TIMER2 ((ushort)0x12 | CPMVEC_OFFSET)
1819#define CPMVEC_RISCTIMER ((ushort)0x11 | CPMVEC_OFFSET)
1820#define CPMVEC_I2C ((ushort)0x10 | CPMVEC_OFFSET)
1821#define CPMVEC_PIO_PC11 ((ushort)0x0f | CPMVEC_OFFSET)
1822#define CPMVEC_PIO_PC10 ((ushort)0x0e | CPMVEC_OFFSET)
1823#define CPMVEC_TIMER3 ((ushort)0x0c | CPMVEC_OFFSET)
1824#define CPMVEC_PIO_PC9 ((ushort)0x0b | CPMVEC_OFFSET)
1825#define CPMVEC_PIO_PC8 ((ushort)0x0a | CPMVEC_OFFSET)
1826#define CPMVEC_PIO_PC7 ((ushort)0x09 | CPMVEC_OFFSET)
1827#define CPMVEC_TIMER4 ((ushort)0x07 | CPMVEC_OFFSET)
1828#define CPMVEC_PIO_PC6 ((ushort)0x06 | CPMVEC_OFFSET)
1829#define CPMVEC_SPI ((ushort)0x05 | CPMVEC_OFFSET)
1830#define CPMVEC_SMC1 ((ushort)0x04 | CPMVEC_OFFSET)
1831#define CPMVEC_SMC2 ((ushort)0x03 | CPMVEC_OFFSET)
1832#define CPMVEC_PIO_PC5 ((ushort)0x02 | CPMVEC_OFFSET)
1833#define CPMVEC_PIO_PC4 ((ushort)0x01 | CPMVEC_OFFSET)
1834#define CPMVEC_ERROR ((ushort)0x00 | CPMVEC_OFFSET)
wdenkfe8c2802002-11-03 00:38:21 +00001835
1836extern void irq_install_handler(int vec, void (*handler)(void *), void *dev_id);
1837
1838/* CPM interrupt configuration vector.
1839*/
1840#define CICR_SCD_SCC4 ((uint)0x00c00000) /* SCC4 @ SCCd */
1841#define CICR_SCC_SCC3 ((uint)0x00200000) /* SCC3 @ SCCc */
1842#define CICR_SCB_SCC2 ((uint)0x00040000) /* SCC2 @ SCCb */
1843#define CICR_SCA_SCC1 ((uint)0x00000000) /* SCC1 @ SCCa */
1844#define CICR_IRL_MASK ((uint)0x0000e000) /* Core interrrupt */
1845#define CICR_HP_MASK ((uint)0x00001f00) /* Hi-pri int. */
1846#define CICR_IEN ((uint)0x00000080) /* Int. enable */
1847#define CICR_SPS ((uint)0x00000001) /* SCC Spread */
1848#endif /* __CPM_8XX__ */