blob: ab7dd08914143be7330251485a3d4f1a4e266299 [file] [log] [blame]
Thomas Chou5c0f9822015-11-09 14:45:06 +08001/*
2 * (C) Copyright 2005, Psyent Corporation <www.psyent.com>
3 * Scott McNutt <smcnutt@psyent.com>
4 * (C) Copyright 2010, Thomas Chou <thomas@wytron.com.tw>
5 *
6 * SPDX-License-Identifier: GPL-2.0+
7 */
8
9#ifndef __CONFIG_H
10#define __CONFIG_H
11
12/*
13 * BOARD/CPU
14 */
15#define CONFIG_DISPLAY_CPUINFO
16#define CONFIG_DISPLAY_BOARDINFO_LATE
17
18/*
19 * SERIAL
20 */
21#define CONFIG_BAUDRATE 115200
22#define CONFIG_SYS_CONSOLE_INFO_QUIET /* Suppress console info */
23
24/*
25 * Flash
26 */
27#define CONFIG_SYS_MAX_FLASH_BANKS 1
28#define CONFIG_SYS_MAX_FLASH_SECT 1024
29#define CONFIG_MTD_DEVICE
30
31/*
32 * NET options
33 */
34#define CONFIG_SYS_RX_ETH_BUFFER 0
35#define CONFIG_CMD_MII
36#define CONFIG_PHY_GIGE
37#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
38#define CONFIG_PHY_MARVELL
39
40/*
41 * BOOTP options
42 */
43#define CONFIG_BOOTP_BOOTFILESIZE
44#define CONFIG_BOOTP_BOOTPATH
45#define CONFIG_BOOTP_GATEWAY
46#define CONFIG_BOOTP_HOSTNAME
47
48/*
49 * FDT options
50 */
51#define CONFIG_OF_LIBFDT
52#define CONFIG_OF_BOARD_SETUP
53#define CONFIG_LMB
54
55/*
56 * ENVIRONMENT -- Put environment in sector CONFIG_SYS_MONITOR_LEN above
57 * CONFIG_SYS_RESET_ADDR, since we assume the monitor is stored at the
58 * reset address, no? This will keep the environment in user region
59 * of flash. NOTE: the monitor length must be multiple of sector size
60 * (which is common practice).
61 */
62#define CONFIG_ENV_IS_IN_FLASH
63
64#define CONFIG_ENV_SIZE 0x10000 /* 64k, 1 sector */
65#define CONFIG_ENV_OVERWRITE /* Serial change Ok */
66#define CONFIG_ENV_ADDR 0xf4040000
67
68/*
69 * MEMORY ORGANIZATION
70 * -Monitor at top of sdram.
71 * -The heap is placed below the monitor
72 * -The stack is placed below the heap (&grows down).
73 */
74#define CONFIG_SYS_SDRAM_BASE 0xc8000000
75#define CONFIG_SYS_SDRAM_SIZE 0x08000000
76#define CONFIG_NR_DRAM_BANKS 1
77#define CONFIG_MONITOR_IS_IN_RAM
78#define CONFIG_SYS_MONITOR_LEN 0x40000 /* Reserve 256k */
79#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_SDRAM_BASE + \
80 CONFIG_SYS_SDRAM_SIZE - \
81 CONFIG_SYS_MONITOR_LEN)
82#define CONFIG_SYS_MALLOC_LEN 0x20000
83
84/*
85 * MISC
86 */
87#define CONFIG_SYS_LONGHELP /* Provide extended help */
88#define CONFIG_SYS_CBSIZE 256 /* Console I/O buf size */
89#define CONFIG_SYS_MAXARGS 16 /* Max command args */
90#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Bootarg buf size */
91#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
92 sizeof(CONFIG_SYS_PROMPT) + \
93 16) /* Print buf size */
94#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE
95#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
96#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MONITOR_BASE - \
97 CONFIG_ENV_SIZE - \
98 CONFIG_SYS_MALLOC_LEN - \
99 0x10000)
100#define CONFIG_CMDLINE_EDITING
101#define CONFIG_CMD_GPIO
102
103#endif /* __CONFIG_H */