blob: f45789fd5ea677bd8a7f561ef408fa9aa059bfc0 [file] [log] [blame]
Alexander Graffa08d392014-04-11 17:09:45 +02001/*
2 * Copyright 2011-2014 Freescale Semiconductor, Inc.
3 *
4 * SPDX-License-Identifier: GPL-2.0+
5 */
6
7/*
8 * Corenet DS style board configuration file
9 */
10#ifndef __QEMU_PPCE500_H
11#define __QEMU_PPCE500_H
12
13#define CONFIG_CMD_REGINFO
14
15/* High Level Configuration Options */
16#define CONFIG_BOOKE
17#define CONFIG_E500 /* BOOKE e500 family */
18#define CONFIG_QEMU_E500
19
20#undef CONFIG_SYS_TEXT_BASE
21#define CONFIG_SYS_TEXT_BASE 0xf01000 /* 15 MB */
Alexander Graffa08d392014-04-11 17:09:45 +020022
23#define CONFIG_SYS_MPC85XX_NO_RESETVEC
24
25#define CONFIG_SYS_RAMBOOT
26
27#define CONFIG_PCI /* Enable PCI/PCIE */
28#define CONFIG_PCI1 1 /* PCI controller 1 */
29#define CONFIG_FSL_PCI_INIT /* Use common FSL init code */
30#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */
31
32#define CONFIG_ENV_OVERWRITE
33
34#define CONFIG_ENABLE_36BIT_PHYS
35
36#define CONFIG_ADDR_MAP
37#define CONFIG_SYS_NUM_ADDR_MAP 16 /* number of TLB1 entries */
38
39#define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */
40#define CONFIG_SYS_MEMTEST_END 0x00400000
41#define CONFIG_SYS_ALT_MEMTEST
42#define CONFIG_PANIC_HANG /* do not reset board on panic */
43
44/* Needed to fill the ccsrbar pointer */
45#define CONFIG_BOARD_EARLY_INIT_F
46
47/* Virtual address to CCSRBAR */
48#define CONFIG_SYS_CCSRBAR 0xe0000000
49/* Physical address should be a function call */
50#ifndef __ASSEMBLY__
51extern unsigned long long get_phys_ccsrbar_addr_early(void);
Alexander Grafe8349752015-03-07 02:10:09 +010052#define CONFIG_SYS_CCSRBAR_PHYS_HIGH (get_phys_ccsrbar_addr_early() >> 32)
53#define CONFIG_SYS_CCSRBAR_PHYS_LOW get_phys_ccsrbar_addr_early()
54#else
55#define CONFIG_SYS_CCSRBAR_PHYS_HIGH 0x0
56#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR
Alexander Graffa08d392014-04-11 17:09:45 +020057#endif
Alexander Grafe8349752015-03-07 02:10:09 +010058
59#define CONFIG_PHYS_64BIT
Alexander Graffa08d392014-04-11 17:09:45 +020060
61/* Virtual address range for PCI region maps */
62#define CONFIG_SYS_PCI_MAP_START 0x80000000
63#define CONFIG_SYS_PCI_MAP_END 0xe8000000
64
65/* Virtual address to a temporary map if we need it (max 128MB) */
66#define CONFIG_SYS_TMPVIRT 0xe8000000
67
68/*
69 * DDR Setup
70 */
71#define CONFIG_VERY_BIG_RAM
72#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000
73#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
74
75#define CONFIG_CHIP_SELECTS_PER_CTRL 0
76
77#define CONFIG_SYS_CLK_FREQ 33000000
78
79#define CONFIG_SYS_NO_FLASH
80
81#define CONFIG_SYS_BOOT_BLOCK 0x00000000 /* boot TLB */
82
83#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
84
85#define CONFIG_ENV_IS_NOWHERE
86
87#define CONFIG_HWCONFIG
88
89#define CONFIG_SYS_INIT_RAM_ADDR 0x00100000
90#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0x0
91#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW 0x00100000
92/* The assembler doesn't like typecast */
93#define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
94 ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
95 CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
96#define CONFIG_SYS_INIT_RAM_SIZE 0x00004000
97
98#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \
99 GENERATED_GBL_DATA_SIZE)
100#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
101
102#define CONFIG_SYS_MONITOR_LEN (512 * 1024)
103#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024)
104
105#define CONFIG_CONS_INDEX 1
106#define CONFIG_SYS_NS16550
107#define CONFIG_SYS_NS16550_SERIAL
108#define CONFIG_SYS_NS16550_REG_SIZE 1
109#define CONFIG_SYS_NS16550_CLK (get_bus_freq(0))
110
111#define CONFIG_SYS_BAUDRATE_TABLE \
112 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
113
114#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500)
115#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600)
116
117/* Use the HUSH parser */
118#define CONFIG_SYS_HUSH_PARSER
119#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
120
121/* pass open firmware flat tree */
122#define CONFIG_OF_LIBFDT
123#define CONFIG_OF_BOARD_SETUP
124#define CONFIG_OF_STDOUT_VIA_ALIAS
125
126/* new uImage format support */
127#define CONFIG_FIT
128#define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */
129
130/*
131 * General PCI
132 * Memory space is mapped 1-1, but I/O space must start from 0.
133 */
134
135#ifdef CONFIG_PCI
136#define CONFIG_PCI_INDIRECT_BRIDGE
Alexander Graffa08d392014-04-11 17:09:45 +0200137#define CONFIG_PCI_PNP /* do pci plug-and-play */
Alexander Graffa08d392014-04-11 17:09:45 +0200138
139#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
140#define CONFIG_DOS_PARTITION
141#endif /* CONFIG_PCI */
142
143#define CONFIG_LBA48
144#define CONFIG_DOS_PARTITION
145#define CONFIG_CMD_EXT2
146
147/*
148 * Environment
149 */
150#define CONFIG_ENV_SIZE 0x2000
151
152#define CONFIG_LOADS_ECHO /* echo on for serial download */
153
154#define CONFIG_LAST_STAGE_INIT
155
156/*
157 * Command line configuration.
158 */
Alexander Graffa08d392014-04-11 17:09:45 +0200159#define CONFIG_CMD_DHCP
Alexander Graffa08d392014-04-11 17:09:45 +0200160#define CONFIG_CMD_BOOTZ
161#define CONFIG_CMD_GREPENV
162#define CONFIG_CMD_IRQ
163#define CONFIG_CMD_PING
Alexander Graffa08d392014-04-11 17:09:45 +0200164
165#ifdef CONFIG_PCI
166#define CONFIG_CMD_PCI
Alexander Graffa08d392014-04-11 17:09:45 +0200167#endif
168
169/*
170 * Miscellaneous configurable options
171 */
172#define CONFIG_SYS_LONGHELP /* undef to save memory */
173#define CONFIG_CMDLINE_EDITING /* Command-line editing */
174#define CONFIG_AUTO_COMPLETE /* add autocompletion support */
175#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
176#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
177#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
178#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
179#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
180
181/*
182 * For booting Linux, the board info and command line data
183 * have to be in the first 64 MB of memory, since this is
184 * the maximum mapped by the Linux kernel during initialization.
185 */
186#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial map for Linux*/
187#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */
188
189/*
190 * Environment Configuration
191 */
192#define CONFIG_ROOTPATH "/opt/nfsroot"
193#define CONFIG_BOOTFILE "uImage"
194#define CONFIG_UBOOTPATH "u-boot.bin" /* U-Boot image on TFTP server*/
195
196/* default location for tftp and bootm */
197#define CONFIG_LOADADDR 1000000
198
199#define CONFIG_BAUDRATE 115200
200
201#define CONFIG_BOOTDELAY 1
202#define CONFIG_BOOTCOMMAND \
203 "test -n \"$qemu_kernel_addr\" && bootm $qemu_kernel_addr - $fdt_addr_r\0"
204
205#endif /* __QEMU_PPCE500_H */