blob: f4d717213ce172ecab751d88387864d99a81d86e [file] [log] [blame]
Tom Rini83d290c2018-05-06 17:58:06 -04001/* SPDX-License-Identifier: GPL-2.0+ */
Jason Cooper2e0c1c72011-10-03 13:49:53 +05302/*
3 * (C) Copyright 2011
4 * Jason Cooper <u-boot@lakedaemon.net>
5 *
6 * Based on work by:
7 * Marvell Semiconductor <www.marvell.com>
8 * Written-by: Siddarth Gore <gores@marvell.com>
Jason Cooper2e0c1c72011-10-03 13:49:53 +05309 */
10
11#ifndef _CONFIG_DREAMPLUG_H
12#define _CONFIG_DREAMPLUG_H
13
14/*
Jason Cooper2e0c1c72011-10-03 13:49:53 +053015 * High Level Configuration Options (easy to change)
16 */
17#define CONFIG_SHEEVA_88SV131 1 /* CPU Core subversion */
Jason Cooper2e0c1c72011-10-03 13:49:53 +053018#define CONFIG_MACH_TYPE MACH_TYPE_DREAMPLUG
Quentin Armitagef6b1f662015-10-28 00:47:19 +000019
20/*
Jason Cooper2e0c1c72011-10-03 13:49:53 +053021 * Commands configuration
22 */
Jason Cooper2e0c1c72011-10-03 13:49:53 +053023
24/*
Quentin Armitage38c0e862015-10-28 00:47:21 +000025 * mv-plug-common.h should be defined after CMD configs since it used them
Jason Cooper2e0c1c72011-10-03 13:49:53 +053026 * to enable certain macros
27 */
Quentin Armitage38c0e862015-10-28 00:47:21 +000028#include "mv-plug-common.h"
Jason Cooper2e0c1c72011-10-03 13:49:53 +053029
30/*
31 * Environment variables configurations
32 */
33#ifdef CONFIG_SPI_FLASH
Jason Cooper2e0c1c72011-10-03 13:49:53 +053034#define CONFIG_ENV_SECT_SIZE 0x10000 /* 64k */
Jason Cooper2e0c1c72011-10-03 13:49:53 +053035#endif
36
37#ifdef CONFIG_CMD_SF
Jason Cooper2e0c1c72011-10-03 13:49:53 +053038#define CONFIG_ENV_SPI_BUS 0
39#define CONFIG_ENV_SPI_CS 0
40#define CONFIG_ENV_SPI_MAX_HZ 50000000 /* 50 MHz */
41#endif
42
43/*
44 * max 4k env size is enough, but in case of nand
45 * it has to be rounded to sector size
46 */
47#define CONFIG_ENV_SIZE 0x1000 /* 4k */
48#define CONFIG_ENV_ADDR 0x100000
49#define CONFIG_ENV_OFFSET 0x100000 /* env starts here */
50
51/*
52 * Default environment variables
53 */
54#define CONFIG_BOOTCOMMAND "setenv ethact egiga0; " \
55 "${x_bootcmd_ethernet}; setenv ethact egiga1; " \
56 "${x_bootcmd_ethernet}; ${x_bootcmd_usb}; ${x_bootcmd_kernel}; "\
57 "setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \
58 "bootm 0x6400000;"
59
60#define CONFIG_EXTRA_ENV_SETTINGS \
61 "x_bootcmd_ethernet=ping 192.168.2.1\0" \
62 "x_bootcmd_usb=usb start\0" \
63 "x_bootcmd_kernel=fatload usb 0 0x6400000 uImage\0" \
64 "x_bootargs=console=ttyS0,115200\0" \
65 "x_bootargs_root=root=/dev/sda2 rootdelay=10\0"
66
67/*
68 * Ethernet Driver configuration
69 */
70#ifdef CONFIG_CMD_NET
71#define CONFIG_MVGBE_PORTS {1, 1} /* enable both ports */
72#define CONFIG_PHY_BASE_ADR 0
73#endif /* CONFIG_CMD_NET */
74
75/*
76 * SATA Driver configuration
77 */
78#ifdef CONFIG_MVSATA_IDE
79#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
80#endif /*CONFIG_MVSATA_IDE*/
81
Jason Cooper2e0c1c72011-10-03 13:49:53 +053082#endif /* _CONFIG_DREAMPLUG_H */