Klaus H. Sorensen | 3fb22bc | 2020-02-11 15:20:22 +0000 | [diff] [blame^] | 1 | // SPDX-License-Identifier: GPL-2.0+ |
| 2 | /* |
| 3 | * (C) Copyright 2019 DEIF A/S |
| 4 | * |
| 5 | * GPIO driver to set/clear SPISEL_BOOT pin on mpc83xx. |
| 6 | */ |
| 7 | |
| 8 | #include <common.h> |
| 9 | #include <dm.h> |
| 10 | #include <mapmem.h> |
| 11 | #include <asm/gpio.h> |
| 12 | |
| 13 | struct mpc83xx_spisel_boot { |
| 14 | u32 __iomem *spi_cs; |
| 15 | ulong addr; |
| 16 | uint gpio_count; |
| 17 | ulong type; |
| 18 | }; |
| 19 | |
| 20 | static u32 gpio_mask(uint gpio) |
| 21 | { |
| 22 | return (1U << (31 - (gpio))); |
| 23 | } |
| 24 | |
| 25 | static int mpc83xx_spisel_boot_direction_input(struct udevice *dev, uint gpio) |
| 26 | { |
| 27 | return -EINVAL; |
| 28 | } |
| 29 | |
| 30 | static int mpc83xx_spisel_boot_set_value(struct udevice *dev, uint gpio, int value) |
| 31 | { |
| 32 | struct mpc83xx_spisel_boot *data = dev_get_priv(dev); |
| 33 | |
| 34 | debug("%s: gpio=%d, value=%u, gpio_mask=0x%08x\n", __func__, |
| 35 | gpio, value, gpio_mask(gpio)); |
| 36 | |
| 37 | if (value) |
| 38 | setbits_be32(data->spi_cs, gpio_mask(gpio)); |
| 39 | else |
| 40 | clrbits_be32(data->spi_cs, gpio_mask(gpio)); |
| 41 | |
| 42 | return 0; |
| 43 | } |
| 44 | |
| 45 | static int mpc83xx_spisel_boot_direction_output(struct udevice *dev, uint gpio, int value) |
| 46 | { |
| 47 | return 0; |
| 48 | } |
| 49 | |
| 50 | static int mpc83xx_spisel_boot_get_value(struct udevice *dev, uint gpio) |
| 51 | { |
| 52 | struct mpc83xx_spisel_boot *data = dev_get_priv(dev); |
| 53 | |
| 54 | return !!(in_be32(data->spi_cs) & gpio_mask(gpio)); |
| 55 | } |
| 56 | |
| 57 | static int mpc83xx_spisel_boot_get_function(struct udevice *dev, uint gpio) |
| 58 | { |
| 59 | return GPIOF_OUTPUT; |
| 60 | } |
| 61 | |
| 62 | #if CONFIG_IS_ENABLED(OF_CONTROL) |
| 63 | static int mpc83xx_spisel_boot_ofdata_to_platdata(struct udevice *dev) |
| 64 | { |
| 65 | struct mpc8xxx_gpio_plat *plat = dev_get_platdata(dev); |
| 66 | fdt_addr_t addr; |
| 67 | u32 reg[2]; |
| 68 | |
| 69 | dev_read_u32_array(dev, "reg", reg, 2); |
| 70 | addr = dev_translate_address(dev, reg); |
| 71 | |
| 72 | plat->addr = addr; |
| 73 | plat->size = reg[1]; |
| 74 | plat->ngpios = dev_read_u32_default(dev, "ngpios", 1); |
| 75 | |
| 76 | return 0; |
| 77 | } |
| 78 | #endif |
| 79 | |
| 80 | static int mpc83xx_spisel_boot_platdata_to_priv(struct udevice *dev) |
| 81 | { |
| 82 | struct mpc83xx_spisel_boot *priv = dev_get_priv(dev); |
| 83 | struct mpc8xxx_gpio_plat *plat = dev_get_platdata(dev); |
| 84 | unsigned long size = plat->size; |
| 85 | ulong driver_data = dev_get_driver_data(dev); |
| 86 | |
| 87 | if (size == 0) |
| 88 | size = 0x04; |
| 89 | |
| 90 | priv->addr = plat->addr; |
| 91 | priv->spi_cs = map_sysmem(plat->addr, size); |
| 92 | |
| 93 | if (!priv->spi_cs) |
| 94 | return -ENOMEM; |
| 95 | |
| 96 | priv->gpio_count = plat->ngpios; |
| 97 | |
| 98 | priv->type = driver_data; |
| 99 | |
| 100 | return 0; |
| 101 | } |
| 102 | |
| 103 | static int mpc83xx_spisel_boot_probe(struct udevice *dev) |
| 104 | { |
| 105 | struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev); |
| 106 | struct mpc83xx_spisel_boot *data = dev_get_priv(dev); |
| 107 | char name[32], *str; |
| 108 | |
| 109 | mpc83xx_spisel_boot_platdata_to_priv(dev); |
| 110 | |
| 111 | snprintf(name, sizeof(name), "MPC@%lx_", data->addr); |
| 112 | str = strdup(name); |
| 113 | |
| 114 | if (!str) |
| 115 | return -ENOMEM; |
| 116 | |
| 117 | uc_priv->bank_name = str; |
| 118 | uc_priv->gpio_count = data->gpio_count; |
| 119 | |
| 120 | return 0; |
| 121 | } |
| 122 | |
| 123 | static const struct dm_gpio_ops mpc83xx_spisel_boot_ops = { |
| 124 | .direction_input = mpc83xx_spisel_boot_direction_input, |
| 125 | .direction_output = mpc83xx_spisel_boot_direction_output, |
| 126 | .get_value = mpc83xx_spisel_boot_get_value, |
| 127 | .set_value = mpc83xx_spisel_boot_set_value, |
| 128 | .get_function = mpc83xx_spisel_boot_get_function, |
| 129 | }; |
| 130 | |
| 131 | static const struct udevice_id mpc83xx_spisel_boot_ids[] = { |
| 132 | { .compatible = "fsl,mpc8309-spisel-boot" }, |
| 133 | { .compatible = "fsl,mpc83xx-spisel-boot" }, |
| 134 | { /* sentinel */ } |
| 135 | }; |
| 136 | |
| 137 | U_BOOT_DRIVER(spisel_boot_mpc83xx) = { |
| 138 | .name = "spisel_boot_mpc83xx", |
| 139 | .id = UCLASS_GPIO, |
| 140 | .ops = &mpc83xx_spisel_boot_ops, |
| 141 | #if CONFIG_IS_ENABLED(OF_CONTROL) |
| 142 | .ofdata_to_platdata = mpc83xx_spisel_boot_ofdata_to_platdata, |
| 143 | .platdata_auto_alloc_size = sizeof(struct mpc8xxx_gpio_plat), |
| 144 | .of_match = mpc83xx_spisel_boot_ids, |
| 145 | #endif |
| 146 | .probe = mpc83xx_spisel_boot_probe, |
| 147 | .priv_auto_alloc_size = sizeof(struct mpc83xx_spisel_boot), |
| 148 | }; |