| Hans de Goede | 860fbdd | 2016-08-18 20:51:12 +0200 | [diff] [blame] | 1 | /* |
| 2 | * Copyright 2015 - Ultimaker B.V. |
| 3 | * Author Olliver Schinagl <oliver@schinagl.nl> |
| 4 | * |
| 5 | * This file is dual-licensed: you can use it either under the terms |
| 6 | * of the GPL or the X11 license, at your option. Note that this dual |
| 7 | * licensing only applies to this file, and not this project as a |
| 8 | * whole. |
| 9 | * |
| 10 | * a) This file is free software; you can redistribute it and/or |
| 11 | * modify it under the terms of the GNU General Public License as |
| 12 | * published by the Free Software Foundation; either version 2 of the |
| 13 | * License, or (at your option) any later version. |
| 14 | * |
| 15 | * This file is distributed in the hope that it will be useful, |
| 16 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 17 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 18 | * GNU General Public License for more details. |
| 19 | * |
| 20 | * Or, alternatively, |
| 21 | * |
| 22 | * b) Permission is hereby granted, free of charge, to any person |
| 23 | * obtaining a copy of this software and associated documentation |
| 24 | * files (the "Software"), to deal in the Software without |
| 25 | * restriction, including without limitation the rights to use, |
| 26 | * copy, modify, merge, publish, distribute, sublicense, and/or |
| 27 | * sell copies of the Software, and to permit persons to whom the |
| 28 | * Software is furnished to do so, subject to the following |
| 29 | * conditions: |
| 30 | * |
| 31 | * The above copyright notice and this permission notice shall be |
| 32 | * included in all copies or substantial portions of the Software. |
| 33 | * |
| 34 | * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| 35 | * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES |
| 36 | * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| 37 | * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT |
| 38 | * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, |
| 39 | * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| 40 | * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| 41 | * OTHER DEALINGS IN THE SOFTWARE. |
| 42 | */ |
| 43 | |
| 44 | #include "sun7i-a20-olinuxino-lime2.dts" |
| 45 | |
| 46 | / { |
| 47 | model = "Olimex A20-OLinuXino-LIME2-eMMC"; |
| 48 | compatible = "olimex,a20-olinuxino-lime2-emmc", "allwinner,sun7i-a20"; |
| 49 | |
| 50 | mmc2_pwrseq: pwrseq { |
| 51 | pinctrl-0 = <&mmc2_pins_nrst>; |
| 52 | pinctrl-names = "default"; |
| 53 | compatible = "mmc-pwrseq-emmc"; |
| 54 | reset-gpios = <&pio 2 16 GPIO_ACTIVE_LOW>; |
| 55 | }; |
| 56 | }; |
| 57 | |
| 58 | &pio { |
| 59 | mmc2_pins_nrst: mmc2@0 { |
| 60 | allwinner,pins = "PC16"; |
| 61 | allwinner,function = "gpio_out"; |
| 62 | allwinner,drive = <SUN4I_PINCTRL_10_MA>; |
| 63 | allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; |
| 64 | }; |
| 65 | }; |
| 66 | |
| 67 | &mmc2 { |
| 68 | pinctrl-names = "default"; |
| 69 | pinctrl-0 = <&mmc2_pins_a>; |
| 70 | vmmc-supply = <®_vcc3v3>; |
| 71 | vqmmc-supply = <®_vcc3v3>; |
| 72 | bus-width = <4>; |
| 73 | non-removable; |
| 74 | mmc-pwrseq = <&mmc2_pwrseq>; |
| 75 | status = "okay"; |
| 76 | |
| 77 | emmc: emmc@0 { |
| 78 | reg = <0>; |
| 79 | compatible = "mmc-card"; |
| 80 | broken-hpi; |
| 81 | }; |
| 82 | }; |