blob: d7f6a3c313e6c86143dc3931fc00196981d8b534 [file] [log] [blame]
Kever Yang045029c2017-06-23 17:17:49 +08001/*
2 * (C) Copyright 2017 Rockchip Electronics Co., Ltd
3 *
4 * SPDX-License-Identifier: GPL-2.0
5 */
6
7#include <common.h>
8#include <clk-uclass.h>
9#include <dm.h>
10#include <errno.h>
11#include <syscon.h>
12#include <asm/io.h>
13#include <asm/arch/clock.h>
14#include <asm/arch/cru_rk322x.h>
15#include <asm/arch/hardware.h>
16#include <dm/lists.h>
17#include <dt-bindings/clock/rk3228-cru.h>
18#include <linux/log2.h>
19
20DECLARE_GLOBAL_DATA_PTR;
21
22enum {
23 VCO_MAX_HZ = 3200U * 1000000,
24 VCO_MIN_HZ = 800 * 1000000,
25 OUTPUT_MAX_HZ = 3200U * 1000000,
26 OUTPUT_MIN_HZ = 24 * 1000000,
27};
28
Kever Yang045029c2017-06-23 17:17:49 +080029#define DIV_TO_RATE(input_rate, div) ((input_rate) / ((div) + 1))
30
31#define PLL_DIVISORS(hz, _refdiv, _postdiv1, _postdiv2) {\
32 .refdiv = _refdiv,\
33 .fbdiv = (u32)((u64)hz * _refdiv * _postdiv1 * _postdiv2 / OSC_HZ), \
34 .postdiv1 = _postdiv1, .postdiv2 = _postdiv2};\
35 _Static_assert(((u64)hz * _refdiv * _postdiv1 * _postdiv2 / OSC_HZ) * \
36 OSC_HZ / (_refdiv * _postdiv1 * _postdiv2) == hz, \
37 #hz "Hz cannot be hit with PLL "\
38 "divisors on line " __stringify(__LINE__));
39
40/* use integer mode*/
41static const struct pll_div apll_init_cfg = PLL_DIVISORS(APLL_HZ, 1, 3, 1);
42static const struct pll_div gpll_init_cfg = PLL_DIVISORS(GPLL_HZ, 2, 2, 1);
43
44static int rkclk_set_pll(struct rk322x_cru *cru, enum rk_clk_id clk_id,
45 const struct pll_div *div)
46{
47 int pll_id = rk_pll_id(clk_id);
48 struct rk322x_pll *pll = &cru->pll[pll_id];
49
50 /* All PLLs have same VCO and output frequency range restrictions. */
51 uint vco_hz = OSC_HZ / 1000 * div->fbdiv / div->refdiv * 1000;
52 uint output_hz = vco_hz / div->postdiv1 / div->postdiv2;
53
54 debug("PLL at %p: fb=%d, ref=%d, pst1=%d, pst2=%d, vco=%u Hz, output=%u Hz\n",
55 pll, div->fbdiv, div->refdiv, div->postdiv1,
56 div->postdiv2, vco_hz, output_hz);
57 assert(vco_hz >= VCO_MIN_HZ && vco_hz <= VCO_MAX_HZ &&
58 output_hz >= OUTPUT_MIN_HZ && output_hz <= OUTPUT_MAX_HZ);
59
60 /* use integer mode */
61 rk_setreg(&pll->con1, 1 << PLL_DSMPD_SHIFT);
62 /* Power down */
63 rk_setreg(&pll->con1, 1 << PLL_PD_SHIFT);
64
65 rk_clrsetreg(&pll->con0,
66 PLL_POSTDIV1_MASK | PLL_FBDIV_MASK,
67 (div->postdiv1 << PLL_POSTDIV1_SHIFT) | div->fbdiv);
68 rk_clrsetreg(&pll->con1, PLL_POSTDIV2_MASK | PLL_REFDIV_MASK,
69 (div->postdiv2 << PLL_POSTDIV2_SHIFT |
70 div->refdiv << PLL_REFDIV_SHIFT));
71
72 /* Power Up */
73 rk_clrreg(&pll->con1, 1 << PLL_PD_SHIFT);
74
75 /* waiting for pll lock */
76 while (readl(&pll->con1) & (1 << PLL_LOCK_STATUS_SHIFT))
77 udelay(1);
78
79 return 0;
80}
81
82static void rkclk_init(struct rk322x_cru *cru)
83{
84 u32 aclk_div;
85 u32 hclk_div;
86 u32 pclk_div;
87
88 /* pll enter slow-mode */
89 rk_clrsetreg(&cru->cru_mode_con,
90 GPLL_MODE_MASK | APLL_MODE_MASK,
91 GPLL_MODE_SLOW << GPLL_MODE_SHIFT |
92 APLL_MODE_SLOW << APLL_MODE_SHIFT);
93
94 /* init pll */
95 rkclk_set_pll(cru, CLK_ARM, &apll_init_cfg);
96 rkclk_set_pll(cru, CLK_GENERAL, &gpll_init_cfg);
97
98 /*
99 * select apll as cpu/core clock pll source and
100 * set up dependent divisors for PERI and ACLK clocks.
101 * core hz : apll = 1:1
102 */
103 aclk_div = APLL_HZ / CORE_ACLK_HZ - 1;
104 assert((aclk_div + 1) * CORE_ACLK_HZ == APLL_HZ && aclk_div < 0x7);
105
106 pclk_div = APLL_HZ / CORE_PERI_HZ - 1;
107 assert((pclk_div + 1) * CORE_PERI_HZ == APLL_HZ && pclk_div < 0xf);
108
109 rk_clrsetreg(&cru->cru_clksel_con[0],
110 CORE_CLK_PLL_SEL_MASK | CORE_DIV_CON_MASK,
111 CORE_CLK_PLL_SEL_APLL << CORE_CLK_PLL_SEL_SHIFT |
112 0 << CORE_DIV_CON_SHIFT);
113
114 rk_clrsetreg(&cru->cru_clksel_con[1],
115 CORE_ACLK_DIV_MASK | CORE_PERI_DIV_MASK,
116 aclk_div << CORE_ACLK_DIV_SHIFT |
117 pclk_div << CORE_PERI_DIV_SHIFT);
118
119 /*
120 * select apll as pd_bus bus clock source and
121 * set up dependent divisors for PCLK/HCLK and ACLK clocks.
122 */
123 aclk_div = GPLL_HZ / BUS_ACLK_HZ - 1;
124 assert((aclk_div + 1) * BUS_ACLK_HZ == GPLL_HZ && aclk_div <= 0x1f);
125
126 pclk_div = GPLL_HZ / BUS_PCLK_HZ - 1;
127 assert((pclk_div + 1) * BUS_PCLK_HZ == GPLL_HZ && pclk_div <= 0x7);
128
129 hclk_div = GPLL_HZ / BUS_HCLK_HZ - 1;
130 assert((hclk_div + 1) * BUS_HCLK_HZ == GPLL_HZ && hclk_div <= 0x3);
131
132 rk_clrsetreg(&cru->cru_clksel_con[0],
133 BUS_ACLK_PLL_SEL_MASK | BUS_ACLK_DIV_MASK,
134 BUS_ACLK_PLL_SEL_GPLL << BUS_ACLK_PLL_SEL_SHIFT |
135 aclk_div << BUS_ACLK_DIV_SHIFT);
136
137 rk_clrsetreg(&cru->cru_clksel_con[1],
138 BUS_PCLK_DIV_MASK | BUS_HCLK_DIV_MASK,
139 pclk_div << BUS_PCLK_DIV_SHIFT |
140 hclk_div << BUS_HCLK_DIV_SHIFT);
141
142 /*
143 * select gpll as pd_peri bus clock source and
144 * set up dependent divisors for PCLK/HCLK and ACLK clocks.
145 */
146 aclk_div = GPLL_HZ / PERI_ACLK_HZ - 1;
147 assert((aclk_div + 1) * PERI_ACLK_HZ == GPLL_HZ && aclk_div < 0x1f);
148
149 hclk_div = ilog2(PERI_ACLK_HZ / PERI_HCLK_HZ);
150 assert((1 << hclk_div) * PERI_HCLK_HZ ==
151 PERI_ACLK_HZ && (hclk_div < 0x4));
152
153 pclk_div = ilog2(PERI_ACLK_HZ / PERI_PCLK_HZ);
154 assert((1 << pclk_div) * PERI_PCLK_HZ ==
155 PERI_ACLK_HZ && pclk_div < 0x8);
156
157 rk_clrsetreg(&cru->cru_clksel_con[10],
158 PERI_PLL_SEL_MASK | PERI_PCLK_DIV_MASK |
159 PERI_HCLK_DIV_MASK | PERI_ACLK_DIV_MASK,
160 PERI_PLL_GPLL << PERI_PLL_SEL_SHIFT |
161 pclk_div << PERI_PCLK_DIV_SHIFT |
162 hclk_div << PERI_HCLK_DIV_SHIFT |
163 aclk_div << PERI_ACLK_DIV_SHIFT);
164
165 /* PLL enter normal-mode */
166 rk_clrsetreg(&cru->cru_mode_con,
167 GPLL_MODE_MASK | APLL_MODE_MASK,
168 GPLL_MODE_NORM << GPLL_MODE_SHIFT |
169 APLL_MODE_NORM << APLL_MODE_SHIFT);
170}
171
172/* Get pll rate by id */
173static uint32_t rkclk_pll_get_rate(struct rk322x_cru *cru,
174 enum rk_clk_id clk_id)
175{
176 uint32_t refdiv, fbdiv, postdiv1, postdiv2;
177 uint32_t con;
178 int pll_id = rk_pll_id(clk_id);
179 struct rk322x_pll *pll = &cru->pll[pll_id];
180 static u8 clk_shift[CLK_COUNT] = {
181 0xff, APLL_MODE_SHIFT, DPLL_MODE_SHIFT, 0xff,
182 GPLL_MODE_SHIFT, 0xff
183 };
184 static u32 clk_mask[CLK_COUNT] = {
185 0xff, APLL_MODE_MASK, DPLL_MODE_MASK, 0xff,
186 GPLL_MODE_MASK, 0xff
187 };
188 uint shift;
189 uint mask;
190
191 con = readl(&cru->cru_mode_con);
192 shift = clk_shift[clk_id];
193 mask = clk_mask[clk_id];
194
195 switch ((con & mask) >> shift) {
196 case GPLL_MODE_SLOW:
197 return OSC_HZ;
198 case GPLL_MODE_NORM:
199
200 /* normal mode */
201 con = readl(&pll->con0);
202 postdiv1 = (con & PLL_POSTDIV1_MASK) >> PLL_POSTDIV1_SHIFT;
203 fbdiv = (con & PLL_FBDIV_MASK) >> PLL_FBDIV_SHIFT;
204 con = readl(&pll->con1);
205 postdiv2 = (con & PLL_POSTDIV2_MASK) >> PLL_POSTDIV2_SHIFT;
206 refdiv = (con & PLL_REFDIV_MASK) >> PLL_REFDIV_SHIFT;
207 return (24 * fbdiv / (refdiv * postdiv1 * postdiv2)) * 1000000;
208 default:
209 return 32768;
210 }
211}
212
213static ulong rockchip_mmc_get_clk(struct rk322x_cru *cru, uint clk_general_rate,
214 int periph)
215{
216 uint src_rate;
217 uint div, mux;
218 u32 con;
219
220 switch (periph) {
221 case HCLK_EMMC:
222 case SCLK_EMMC:
223 con = readl(&cru->cru_clksel_con[11]);
224 mux = (con & EMMC_PLL_MASK) >> EMMC_PLL_SHIFT;
225 con = readl(&cru->cru_clksel_con[12]);
226 div = (con & EMMC_DIV_MASK) >> EMMC_DIV_SHIFT;
227 break;
228 case HCLK_SDMMC:
229 case SCLK_SDMMC:
230 con = readl(&cru->cru_clksel_con[11]);
231 mux = (con & MMC0_PLL_MASK) >> MMC0_PLL_SHIFT;
232 div = (con & MMC0_DIV_MASK) >> MMC0_DIV_SHIFT;
233 break;
234 default:
235 return -EINVAL;
236 }
237
238 src_rate = mux == EMMC_SEL_24M ? OSC_HZ : clk_general_rate;
Kever Yang3a94d752017-07-27 12:54:01 +0800239 return DIV_TO_RATE(src_rate, div) / 2;
Kever Yang045029c2017-06-23 17:17:49 +0800240}
241
242static ulong rockchip_mmc_set_clk(struct rk322x_cru *cru, uint clk_general_rate,
243 int periph, uint freq)
244{
245 int src_clk_div;
246 int mux;
247
248 debug("%s: clk_general_rate=%u\n", __func__, clk_general_rate);
249
Kever Yang3a94d752017-07-27 12:54:01 +0800250 /* mmc clock defaulg div 2 internal, need provide double in cru */
251 src_clk_div = DIV_ROUND_UP(clk_general_rate / 2, freq);
Kever Yang045029c2017-06-23 17:17:49 +0800252
Kever Yang217273c2017-07-27 12:54:02 +0800253 if (src_clk_div > 128) {
Kever Yang3a94d752017-07-27 12:54:01 +0800254 src_clk_div = DIV_ROUND_UP(OSC_HZ / 2, freq);
Kever Yang217273c2017-07-27 12:54:02 +0800255 assert(src_clk_div - 1 < 128);
Kever Yang045029c2017-06-23 17:17:49 +0800256 mux = EMMC_SEL_24M;
257 } else {
258 mux = EMMC_SEL_GPLL;
259 }
260
261 switch (periph) {
262 case HCLK_EMMC:
263 case SCLK_EMMC:
264 rk_clrsetreg(&cru->cru_clksel_con[11],
265 EMMC_PLL_MASK,
266 mux << EMMC_PLL_SHIFT);
267 rk_clrsetreg(&cru->cru_clksel_con[12],
268 EMMC_DIV_MASK,
269 (src_clk_div - 1) << EMMC_DIV_SHIFT);
270 break;
271 case HCLK_SDMMC:
272 case SCLK_SDMMC:
273 rk_clrsetreg(&cru->cru_clksel_con[11],
274 MMC0_PLL_MASK | MMC0_DIV_MASK,
275 mux << MMC0_PLL_SHIFT |
276 (src_clk_div - 1) << MMC0_DIV_SHIFT);
277 break;
278 default:
279 return -EINVAL;
280 }
281
282 return rockchip_mmc_get_clk(cru, clk_general_rate, periph);
283}
284
285static int rk322x_ddr_set_clk(struct rk322x_cru *cru, unsigned int set_rate)
286{
287 struct pll_div dpll_cfg;
288
289 /* clk_ddrc == DPLL = 24MHz / refdiv * fbdiv / postdiv1 / postdiv2 */
290 switch (set_rate) {
291 case 400*MHz:
292 dpll_cfg = (struct pll_div)
293 {.refdiv = 1, .fbdiv = 50, .postdiv1 = 3, .postdiv2 = 1};
294 break;
295 case 600*MHz:
296 dpll_cfg = (struct pll_div)
297 {.refdiv = 1, .fbdiv = 75, .postdiv1 = 3, .postdiv2 = 1};
298 break;
299 case 800*MHz:
300 dpll_cfg = (struct pll_div)
301 {.refdiv = 1, .fbdiv = 100, .postdiv1 = 3, .postdiv2 = 1};
302 break;
303 }
304
305 /* pll enter slow-mode */
306 rk_clrsetreg(&cru->cru_mode_con, DPLL_MODE_MASK,
307 DPLL_MODE_SLOW << DPLL_MODE_SHIFT);
308 rkclk_set_pll(cru, CLK_DDR, &dpll_cfg);
309 /* PLL enter normal-mode */
310 rk_clrsetreg(&cru->cru_mode_con, DPLL_MODE_MASK,
311 DPLL_MODE_NORM << DPLL_MODE_SHIFT);
312
313 return set_rate;
314}
315static ulong rk322x_clk_get_rate(struct clk *clk)
316{
317 struct rk322x_clk_priv *priv = dev_get_priv(clk->dev);
318 ulong rate, gclk_rate;
319
320 gclk_rate = rkclk_pll_get_rate(priv->cru, CLK_GENERAL);
321 switch (clk->id) {
322 case 0 ... 63:
323 rate = rkclk_pll_get_rate(priv->cru, clk->id);
324 break;
325 case HCLK_EMMC:
326 case SCLK_EMMC:
327 case HCLK_SDMMC:
328 case SCLK_SDMMC:
329 rate = rockchip_mmc_get_clk(priv->cru, gclk_rate, clk->id);
330 break;
331 default:
332 return -ENOENT;
333 }
334
335 return rate;
336}
337
338static ulong rk322x_clk_set_rate(struct clk *clk, ulong rate)
339{
340 struct rk322x_clk_priv *priv = dev_get_priv(clk->dev);
341 ulong new_rate, gclk_rate;
342
343 gclk_rate = rkclk_pll_get_rate(priv->cru, CLK_GENERAL);
344 switch (clk->id) {
345 case HCLK_EMMC:
346 case SCLK_EMMC:
347 case HCLK_SDMMC:
348 case SCLK_SDMMC:
349 new_rate = rockchip_mmc_set_clk(priv->cru, gclk_rate,
350 clk->id, rate);
351 break;
352 case CLK_DDR:
353 new_rate = rk322x_ddr_set_clk(priv->cru, rate);
354 break;
355 default:
356 return -ENOENT;
357 }
358
359 return new_rate;
360}
361
362static struct clk_ops rk322x_clk_ops = {
363 .get_rate = rk322x_clk_get_rate,
364 .set_rate = rk322x_clk_set_rate,
365};
366
367static int rk322x_clk_ofdata_to_platdata(struct udevice *dev)
368{
369 struct rk322x_clk_priv *priv = dev_get_priv(dev);
370
371 priv->cru = (struct rk322x_cru *)devfdt_get_addr(dev);
372
373 return 0;
374}
375
376static int rk322x_clk_probe(struct udevice *dev)
377{
378 struct rk322x_clk_priv *priv = dev_get_priv(dev);
379
380 rkclk_init(priv->cru);
381
382 return 0;
383}
384
385static int rk322x_clk_bind(struct udevice *dev)
386{
387 int ret;
388
389 /* The reset driver does not have a device node, so bind it here */
390 ret = device_bind_driver(gd->dm_root, "rk322x_sysreset", "reset", &dev);
391 if (ret)
392 debug("Warning: No RK3036 reset driver: ret=%d\n", ret);
393
394 return 0;
395}
396
397static const struct udevice_id rk322x_clk_ids[] = {
398 { .compatible = "rockchip,rk3228-cru" },
399 { }
400};
401
402U_BOOT_DRIVER(rockchip_rk322x_cru) = {
403 .name = "clk_rk322x",
404 .id = UCLASS_CLK,
405 .of_match = rk322x_clk_ids,
406 .priv_auto_alloc_size = sizeof(struct rk322x_clk_priv),
407 .ofdata_to_platdata = rk322x_clk_ofdata_to_platdata,
408 .ops = &rk322x_clk_ops,
409 .bind = rk322x_clk_bind,
410 .probe = rk322x_clk_probe,
411};