blob: 757f0abdd74481a94498343297f31d48bc731984 [file] [log] [blame]
TsiChungLiewaa5f1f92008-01-14 17:23:08 -06001Freescale MCF5373EVB ColdFire Development Board
2================================================
3
4TsiChung Liew(Tsi-Chung.Liew@freescale.com)
5Created 11/08/07
6===========================================
7
8
9Changed files:
10==============
11
12- board/freescale/m5373evb/m5373evb.c Dram setup
13- board/freescale/m5373evb/mii.c Mii access
14- board/freescale/m5373evb/Makefile Makefile
15- board/freescale/m5373evb/config.mk config make
16- board/freescale/m5373evb/u-boot.lds Linker description
17
Peter Tysera4145532010-04-12 22:28:12 -050018- arch/m68k/cpu/mcf532x/cpu.c cpu specific code
19- arch/m68k/cpu/mcf532x/cpu_init.c FBCS, Mux pins, icache and RTC extra regs
20- arch/m68k/cpu/mcf532x/interrupts.c cpu specific interrupt support
21- arch/m68k/cpu/mcf532x/speed.c system, pci, flexbus, and cpu clock
22- arch/m68k/cpu/mcf532x/Makefile Makefile
23- arch/m68k/cpu/mcf532x/config.mk config make
24- arch/m68k/cpu/mcf532x/start.S start up assembly code
TsiChungLiewaa5f1f92008-01-14 17:23:08 -060025
26- doc/README.m5373evb This readme file
27
28- drivers/net/mcffec.c ColdFire common FEC driver
29- drivers/serial/mcfuart.c ColdFire common UART driver
30- drivers/rtc/mcfrtc.c Realtime clock Driver
31
32- include/asm-m68k/bitops.h Bit operation function export
33- include/asm-m68k/byteorder.h Byte order functions
34- include/asm-m68k/fec.h FEC structure and definition
35- include/asm-m68k/fsl_i2c.h I2C structure and definition
36- include/asm-m68k/global_data.h Global data structure
37- include/asm-m68k/immap.h ColdFire specific header file and driver macros
38- include/asm-m68k/immap_532x.h mcf532x specific header file
39- include/asm-m68k/io.h io functions
40- include/asm-m68k/m532x.h mcf532x specific header file
41- include/asm-m68k/posix_types.h Posix
42- include/asm-m68k/processor.h header file
43- include/asm-m68k/ptrace.h Exception structure
44- include/asm-m68k/rtc.h Realtime clock header file
45- include/asm-m68k/string.h String function export
46- include/asm-m68k/timer.h Timer structure and definition
47- include/asm-m68k/types.h Data types definition
48- include/asm-m68k/uart.h Uart structure and definition
Bin Menga1875592016-02-05 19:30:11 -080049- include/asm-m68k/u-boot.h U-Boot structure
TsiChungLiewaa5f1f92008-01-14 17:23:08 -060050
51- include/configs/M5373EVB.h Board specific configuration file
52
Peter Tyserea0364f2010-04-12 22:28:04 -050053- arch/m68k/lib/board.c board init function
54- arch/m68k/lib/cache.c
55- arch/m68k/lib/interrupts Coldfire common interrupt functions
56- arch/m68k/lib/m68k_linux.c
57- arch/m68k/lib/time.c Timer functions (Dma timer and PIT)
58- arch/m68k/lib/traps.c Exception init code
TsiChungLiewaa5f1f92008-01-14 17:23:08 -060059
601 MCF5373 specific Options/Settings
61====================================
621.1 pre-loader is no longer suppoer in thie coldfire family
63
641.2 Configuration settings for M5373EVB Development Board
65CONFIG_MCF532x -- define for all MCF532x CPUs
66CONFIG_M5373 -- define for all Freescale MCF5373 CPUs
67CONFIG_M5373EVB -- define for M5373EVB board
68
69CONFIG_MCFUART -- define to use common CF Uart driver
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020070CONFIG_SYS_UART_PORT -- define UART port number, start with 0, 1 and 2
TsiChungLiewaa5f1f92008-01-14 17:23:08 -060071CONFIG_BAUDRATE -- define UART baudrate
72
73CONFIG_MCFRTC -- define to use common CF RTC driver
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020074CONFIG_SYS_MCFRTC_BASE -- provide base address for RTC in immap.h
75CONFIG_SYS_RTC_OSCILLATOR -- define RTC clock frequency
TsiChungLiewaa5f1f92008-01-14 17:23:08 -060076RTC_DEBUG -- define to show RTC debug message
Bin Menga1875592016-02-05 19:30:11 -080077CONFIG_CMD_DATE -- enable to use date feature in U-Boot
TsiChungLiewaa5f1f92008-01-14 17:23:08 -060078
79CONFIG_MCFFEC -- define to use common CF FEC driver
TsiChungLiewaa5f1f92008-01-14 17:23:08 -060080CONFIG_MII -- enable to use MII driver
81CONFIG_CF_DOMII -- enable to use MII feature in cmd_mii.c
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020082CONFIG_SYS_DISCOVER_PHY -- enable PHY discovery
83CONFIG_SYS_RX_ETH_BUFFER -- Set FEC Receive buffer
84CONFIG_SYS_FAULT_ECHO_LINK_DOWN--
85CONFIG_SYS_FEC0_PINMUX -- Set FEC0 Pin configuration
86CONFIG_SYS_FEC0_MIIBASE -- Set FEC0 MII base register
TsiChungLiewaa5f1f92008-01-14 17:23:08 -060087MCFFEC_TOUT_LOOP -- set FEC timeout loop
88
89CONFIG_MCFTMR -- define to use DMA timer
90CONFIG_MCFPIT -- define to use PIT timer
91
Heiko Schocher00f792e2012-10-24 13:48:22 +020092CONFIG_SYS_I2C_FSL -- define to use FSL common I2C driver
Heiko Schocherea818db2013-01-29 08:53:15 +010093CONFIG_SYS_I2C_SOFT -- define for I2C bit-banged
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020094CONFIG_SYS_I2C_SPEED -- define for I2C speed
95CONFIG_SYS_I2C_SLAVE -- define for I2C slave address
96CONFIG_SYS_I2C_OFFSET -- define for I2C base address offset
97CONFIG_SYS_IMMR -- define for MBAR offset
TsiChungLiewaa5f1f92008-01-14 17:23:08 -060098
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020099CONFIG_SYS_MBAR -- define MBAR offset
TsiChungLiewaa5f1f92008-01-14 17:23:08 -0600100
101CONFIG_MONITOR_IS_IN_RAM -- Not support
102
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200103CONFIG_SYS_INIT_RAM_ADDR -- defines the base address of the MCF5373 internal SRAM
TsiChungLiewaa5f1f92008-01-14 17:23:08 -0600104
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200105CONFIG_SYS_CSn_BASE -- defines the Chip Select Base register
106CONFIG_SYS_CSn_MASK -- defines the Chip Select Mask register
107CONFIG_SYS_CSn_CTRL -- defines the Chip Select Control register
TsiChungLiewaa5f1f92008-01-14 17:23:08 -0600108
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200109CONFIG_SYS_SDRAM_BASE -- defines the DRAM Base
TsiChungLiewaa5f1f92008-01-14 17:23:08 -0600110
1112. MEMORY MAP UNDER U-BOOT AND LINUX KERNEL
112===========================================
1132.1. System memory map:
114 Flash: 0x00000000-0x3FFFFFFF (1024MB)
115 DDR: 0x40000000-0x7FFFFFFF (1024MB)
116 SRAM: 0x80000000-0x8FFFFFFF (256MB)
117 IP: 0xF0000000-0xFFFFFFFF (256MB)
118
Bin Menga1875592016-02-05 19:30:11 -08001192.2. For the initial bringup, we adopted a consistent memory scheme between U-Boot and
TsiChungLiewaa5f1f92008-01-14 17:23:08 -0600120 linux kernel, you can customize it based on your system requirements:
121 Flash0: 0x00000000-0x00FFFFFF (16MB)
122
123 DDR: 0x40000000-0x4FFFFFFF (256MB)
124 SRAM: 0x80000000-0x80007FFF (32KB)
125 IP: 0xFC000000-0xFC0FFFFF (64KB)
126
1273. COMPILATION
128==============
1293.1 To create U-Boot the gcc-4.1-xx compiler set (ColdFire ELF or
130uClinux version) from codesourcery.com was used. Download it from:
131http://www.codesourcery.com/gnu_toolchains/coldfire/download.html
132
1333.2 Compilation
134 export CROSS_COMPILE=cross-compile-prefix
135 cd u-boot-1.x.x
136 make distclean
137 make M5373EVB_config
138 make
139
1404. SCREEN DUMP
141==============
1424.1 M5373EVB Development board
143 (NOTE: May not show exactly the same)
144
145U-Boot 1.3.0 (Nov 8 2007 - 12:44:08)
146
147CPU: Freescale MCF5373 (Mask:65 Version:1)
148 CPU CLK 240 Mhz BUS CLK 80 Mhz
149Board: Freescale FireEngine 5373 EVB
150I2C: ready
151DRAM: 32 MB
152FLASH: 2 MB
153In: serial
154Out: serial
155Err: serial
156NAND: 16 MiB
157Net: FEC0
158-> print
159bootdelay=1
160baudrate=115200
161ethaddr=00:e0:0c:bc:e5:60
162hostname=M5373EVB
163netdev=eth0
164loadaddr=40010000
165load=tftp ${loadaddr) ${u-boot}
166upd=run load; run prog
167prog=prot off 0 2ffff;era 0 2ffff;cp.b ${loadaddr} 0 ${filesize};save
168ethact=FEC0
169u-boot=u-boot.bin
170gatewayip=192.168.1.1
171netmask=255.255.255.0
172ipaddr=192.168.1.3
173serverip=192.168.1.2
174stdin=serial
175stdout=serial
176stderr=serial
177mem=261632k
178
179Environment size: 401/8188 bytes
180-> bdinfo
181memstart = 0x40000000
182memsize = 0x02000000
183flashstart = 0x00000000
184flashsize = 0x00200000
185flashoffset = 0x00000000
186sramstart = 0x80000000
187sramsize = 0x00008000
Wolfgang Denk865f0f92008-01-23 14:31:17 +0100188mbar = 0xFC000000
189busfreq = 80 MHz
TsiChungLiewaa5f1f92008-01-14 17:23:08 -0600190ethaddr = 00:E0:0C:BC:E5:60
191ip_addr = 192.168.1.3
192baudrate = 115200 bps
193->
194-> help
Wolfgang Denk865f0f92008-01-23 14:31:17 +0100195? - alias for 'help'
Wolfgang Denk865f0f92008-01-23 14:31:17 +0100196base - print or set address offset
197bdinfo - print Board Info structure
198boot - boot default, i.e., run 'bootcmd'
199bootd - boot default, i.e., run 'bootcmd'
TsiChungLiewaa5f1f92008-01-14 17:23:08 -0600200bootelf - Boot from an ELF image in memory
Wolfgang Denk865f0f92008-01-23 14:31:17 +0100201bootm - boot application image from memory
TsiChungLiewaa5f1f92008-01-14 17:23:08 -0600202bootp - boot image via network using BootP/TFTP protocol
Wolfgang Denk865f0f92008-01-23 14:31:17 +0100203bootvx - Boot vxWorks from an ELF image
204cmp - memory compare
TsiChungLiewaa5f1f92008-01-14 17:23:08 -0600205coninfo - print console devices and information
Wolfgang Denk865f0f92008-01-23 14:31:17 +0100206cp - memory copy
207crc32 - checksum calculation
208date - get/set/reset date & time
209dcache - enable or disable data cache
210echo - echo args to console
211erase - erase FLASH memory
212flinfo - print FLASH memory information
213go - start application at address 'addr'
214help - print online help
Peter Tyser0f89c542009-04-18 22:34:03 -0500215i2c - I2C sub-system
Wolfgang Denk865f0f92008-01-23 14:31:17 +0100216icache - enable or disable instruction cache
Wolfgang Denk865f0f92008-01-23 14:31:17 +0100217iminfo - print header information for application image
218imls - list all images found in flash
TsiChungLiewaa5f1f92008-01-14 17:23:08 -0600219itest - return true/false on integer compare
Wolfgang Denk865f0f92008-01-23 14:31:17 +0100220loadb - load binary file over serial line (kermit mode)
221loads - load S-Record file over serial line
222loady - load binary file over serial line (ymodem mode)
223loop - infinite loop on address range
TsiChungLiewaa5f1f92008-01-14 17:23:08 -0600224ls - list files in a directory (default /)
Wolfgang Denk865f0f92008-01-23 14:31:17 +0100225md - memory display
226mii - MII utility commands
227mm - memory modify (auto-incrementing)
228mtest - simple RAM test
229mw - memory write (fill)
TsiChungLiewaa5f1f92008-01-14 17:23:08 -0600230nand - NAND sub-system
231nboot - boot from NAND device
232nfs - boot image via network using NFS protocol
Wolfgang Denk865f0f92008-01-23 14:31:17 +0100233nm - memory modify (constant address)
TsiChungLiewaa5f1f92008-01-14 17:23:08 -0600234ping - send ICMP ECHO_REQUEST to network host
235printenv- print environment variables
236protect - enable or disable FLASH write protection
237rarpboot- boot image via network using RARP/TFTP protocol
Wolfgang Denk865f0f92008-01-23 14:31:17 +0100238reset - Perform RESET of the CPU
239run - run commands in an environment variable
TsiChungLiewaa5f1f92008-01-14 17:23:08 -0600240saveenv - save environment variables to persistent storage
Wolfgang Denk865f0f92008-01-23 14:31:17 +0100241setenv - set environment variables
242sleep - delay execution for some time
Peter Tyser3202d332009-09-16 21:38:10 -0500243source - run script from memory
TsiChungLiewaa5f1f92008-01-14 17:23:08 -0600244tftpboot- boot image via network using TFTP protocol
245version - print monitor version
246-> tftp 0x40800000 uImage
247Using FEC0 device
248TFTP from server 192.168.1.3; our IP address is 192.168.1.3 Filename 'uImage'.
249Load address: 0x40800000
250Loading: #################################################################
Wolfgang Denk865f0f92008-01-23 14:31:17 +0100251 #################################################################
252 ##########
TsiChungLiewaa5f1f92008-01-14 17:23:08 -0600253done
254Bytes transferred = 2053270 (1f5496 hex)
255-> bootm 0x40800000
256## Booting image at 40800000 ...
257 Image Name: Linux Kernel Image
Wolfgang Denk865f0f92008-01-23 14:31:17 +0100258 Created: 2007-11-07 20:33:08 UTC
TsiChungLiewaa5f1f92008-01-14 17:23:08 -0600259 Image Type: M68K Linux Kernel Image (gzip compressed)
Wolfgang Denk865f0f92008-01-23 14:31:17 +0100260 Data Size: 2053206 Bytes = 2 MB
TsiChungLiewaa5f1f92008-01-14 17:23:08 -0600261 Load Address: 40020000
262 Entry Point: 40020000
263 Verifying Checksum ... OK
264 Uncompressing Kernel Image ... OK
265Linux version 2.6.22-uc1 (mattw@loa) (gcc version 4.2.1 (Sourcery G++ Lite 4.2-7
266
267
268uClinux/COLDFIRE(m537x)
269COLDFIRE port done by Greg Ungerer, gerg@snapgear.com Flat model support (C) 1998,1999 Kenneth Albanowski, D. Jeff Dionne Built 1 zonelists. Total pages: 8128 Kernel command line: rootfstype=romfs PID hash table entries: 128 (order: 7, 512 bytes) Dentry cache hash table entries: 4096 (order: 2, 16384 bytes) Inode-cache hash table entries: 2048 (order: 1, 8192 bytes) Memory available: 28092k/32768k RAM, (1788k kernel code, 244k data) Mount-cache hash table entries: 512
270NET: Registered protocol family 16
271USB-MCF537x: (HOST module) EHCI device is registered
272USB-MCF537x: (OTG module) EHCI device is registered
273USB-MCF537x: (OTG module) UDC device is registered
274usbcore: registered new interface driver usbfs
275usbcore: registered new interface driver hub
276usbcore: registered new device driver usb
277NET: Registered protocol family 2
278IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 1024 (order: 1, 8192 bytes) TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
279TCP: Hash tables configured (established 1024 bind 1024) TCP reno registered
Albert ARIBAUDfa82f872011-08-04 18:45:45 +0200280JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
TsiChungLiewaa5f1f92008-01-14 17:23:08 -0600281io scheduler noop registered
282io scheduler cfq registered (default)
283ColdFire internal UART serial driver version 1.00 ttyS0 at 0xfc060000 (irq = 90) is a builtin ColdFire UART
284ttyS1 at 0xfc064000 (irq = 91) is a builtin ColdFire UART
285ttyS2 at 0xfc068000 (irq = 92) is a builtin ColdFire UART RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
286loop: module loaded
287nbd: registered device at major 43
288usbcore: registered new interface driver ub FEC ENET Version 0.2
289fec: PHY @ 0x1, ID 0x20005c90 -- DP83848
290eth0: ethernet 00:e0:0c:bc:e5:60
291uclinux[mtd]: RAM probe address=0x4021c22c size=0x22b000 Creating 1 MTD partitions on "RAM":
2920x00000000-0x0022b000 : "ROMfs"
293uclinux[mtd]: set ROMfs to be root filesystem NAND device: Manufacturer ID: 0x20, Chip ID: 0x73 (ST Micro NAND 16MiB 3,3V 8-b) Scanning device for bad blocks Creating 1 MTD partitions on "NAND 16MiB 3,3V 8-bit":
2940x00000000-0x01000000 : "M53xx flash partition 1"
295QSPI: spi->max_speed_hz 300000
296QSPI: Baud set to 255
297SPI: Coldfire master initialized
298M537x - Disable UART1 when using Audio
299udc: Freescale MCF53xx UDC driver version 27 October 2006 init
300udc: MCF53xx USB Device is found. ID=0x5 Rev=0x41 i2c /dev entries driver
301usbcore: registered new interface driver usbhid
302drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver TCP cubic registered
303NET: Registered protocol family 1
304NET: Registered protocol family 17
305VFS: Mounted root (romfs filesystem) readonly.
306Freeing unused kernel memory: 64k freed (0x401f5000 - 0x40204000) init started: BusyBox v1.00 (2007.11.07-19:57+0000) multi-call binary?Setting e Mounting filesystems
307mount: Mounting devpts on /dev/pts failed: No such device
308mount: Mounting usbfs on /proc/bus/usb failed: No such file or directory Starting syslogd and klogd Setting up networking on loopback device:
309Setting up networking on eth0:
310info, udhcpc (v0.9.9-pre) started
311eth0: config: auto-negotiation on, 100FDX, 100HDX, 10FDX, 10HDX.
312debug, Sending discover...
313debug, Sending discover...
314debug, Sending select for 172.27.0.130...
315info, Lease of 172.27.0.130 obtained, lease time 43200 deleting routers
316route: SIOC[ADD|DEL]RT: No such process
317adding dns 172.27.0.1
318Starting the boa webserver:
319Setting time from ntp server: ntp.cs.strath.ac.uk
320ntp.cs.strath.ac.uk: Unknown host
321
322
323BusyBox v1.00 (2007.11.07-19:57+0000) Built-in shell (msh) Enter 'help' for a list of built-in commands.
324
325#