blob: 9e6a0d51c4e8d1e0eddc1cdf41aac20a109c6a45 [file] [log] [blame]
Marek Vasutbc3a4a52010-04-05 01:50:57 +02001/*
2 * Copyright (C) 2009
3 * Marek Vasut <marek.vasut@gmail.com>
4 *
5 * Heavily based on pxa255_idp platform
6 *
7 * See file CREDITS for list of people who contributed to this
8 * project.
9 *
10 * This program is free software; you can redistribute it and/or
11 * modify it under the terms of the GNU General Public License as
12 * published by the Free Software Foundation; either version 2 of
13 * the License, or (at your option) any later version.
14 *
15 * This program is distributed in the hope that it will be useful,
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 * GNU General Public License for more details.
19 *
20 * You should have received a copy of the GNU General Public License
21 * along with this program; if not, write to the Free Software
22 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
23 * MA 02111-1307 USA
24 */
25
26#include <common.h>
27#include <command.h>
28#include <serial.h>
29#include <asm/arch/hardware.h>
30#include <spi.h>
Marek Vasut3ba8bf72010-09-09 09:50:39 +020031#include <asm/io.h>
Marek Vasutbc3a4a52010-04-05 01:50:57 +020032
33DECLARE_GLOBAL_DATA_PTR;
34
35#ifdef CONFIG_CMD_SPI
36void lcd_start(void);
37#else
38inline void lcd_start(void) {};
39#endif
40
41/*
42 * Miscelaneous platform dependent initialisations
43 */
44
45int board_init (void)
46{
Marek Vasut24e84c32010-09-30 12:22:38 +020047 /* We have RAM, disable cache */
48 dcache_disable();
49 icache_disable();
Marek Vasutbc3a4a52010-04-05 01:50:57 +020050
Marek Vasut24e84c32010-09-30 12:22:38 +020051 /* arch number of Z2 */
Marek Vasutbc3a4a52010-04-05 01:50:57 +020052 gd->bd->bi_arch_number = MACH_TYPE_ZIPIT2;
53
54 /* adress of boot parameters */
55 gd->bd->bi_boot_params = 0xa0000100;
56
57 /* Enable LCD */
58 lcd_start();
59
60 return 0;
61}
62
Marek Vasutbc3a4a52010-04-05 01:50:57 +020063struct serial_device *default_serial_console (void)
64{
65 return &serial_stuart_device;
66}
67
Marek Vasut24e84c32010-09-30 12:22:38 +020068extern void pxa_dram_init(void);
69int dram_init(void)
70{
71 pxa_dram_init();
72 gd->ram_size = PHYS_SDRAM_1_SIZE;
73 return 0;
74}
75
76void dram_init_banksize(void)
Marek Vasutbc3a4a52010-04-05 01:50:57 +020077{
78 gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
79 gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
Marek Vasutbc3a4a52010-04-05 01:50:57 +020080}
81
82#ifdef CONFIG_CMD_SPI
83
84struct {
85 unsigned char reg;
86 unsigned short data;
87 unsigned char mdelay;
88} lcd_data[] = {
89 { 0x07, 0x0000, 0 },
90 { 0x13, 0x0000, 10 },
91 { 0x11, 0x3004, 0 },
92 { 0x14, 0x200F, 0 },
93 { 0x10, 0x1a20, 0 },
94 { 0x13, 0x0040, 50 },
95 { 0x13, 0x0060, 0 },
96 { 0x13, 0x0070, 200 },
97 { 0x01, 0x0127, 0 },
98 { 0x02, 0x0700, 0 },
99 { 0x03, 0x1030, 0 },
100 { 0x08, 0x0208, 0 },
101 { 0x0B, 0x0620, 0 },
102 { 0x0C, 0x0110, 0 },
103 { 0x30, 0x0120, 0 },
104 { 0x31, 0x0127, 0 },
105 { 0x32, 0x0000, 0 },
106 { 0x33, 0x0503, 0 },
107 { 0x34, 0x0727, 0 },
108 { 0x35, 0x0124, 0 },
109 { 0x36, 0x0706, 0 },
110 { 0x37, 0x0701, 0 },
111 { 0x38, 0x0F00, 0 },
112 { 0x39, 0x0F00, 0 },
113 { 0x40, 0x0000, 0 },
114 { 0x41, 0x0000, 0 },
115 { 0x42, 0x013f, 0 },
116 { 0x43, 0x0000, 0 },
117 { 0x44, 0x013f, 0 },
118 { 0x45, 0x0000, 0 },
119 { 0x46, 0xef00, 0 },
120 { 0x47, 0x013f, 0 },
121 { 0x48, 0x0000, 0 },
122 { 0x07, 0x0015, 30 },
123 { 0x07, 0x0017, 0 },
124 { 0x20, 0x0000, 0 },
125 { 0x21, 0x0000, 0 },
126 { 0x22, 0x0000, 0 },
127};
128
129void zipitz2_spi_sda(int set)
130{
131 /* GPIO 13 */
132 if (set)
Marek Vasut3ba8bf72010-09-09 09:50:39 +0200133 writel((1 << 13), GPSR0);
Marek Vasutbc3a4a52010-04-05 01:50:57 +0200134 else
Marek Vasut3ba8bf72010-09-09 09:50:39 +0200135 writel((1 << 13), GPCR0);
Marek Vasutbc3a4a52010-04-05 01:50:57 +0200136}
137
138void zipitz2_spi_scl(int set)
139{
140 /* GPIO 22 */
141 if (set)
Marek Vasut3ba8bf72010-09-09 09:50:39 +0200142 writel((1 << 22), GPCR0);
Marek Vasutbc3a4a52010-04-05 01:50:57 +0200143 else
Marek Vasut3ba8bf72010-09-09 09:50:39 +0200144 writel((1 << 22), GPSR0);
Marek Vasutbc3a4a52010-04-05 01:50:57 +0200145}
146
147unsigned char zipitz2_spi_read(void)
148{
149 /* GPIO 40 */
Marek Vasut3ba8bf72010-09-09 09:50:39 +0200150 return !!(readl(GPLR1) & (1 << 8));
Marek Vasutbc3a4a52010-04-05 01:50:57 +0200151}
152
153int spi_cs_is_valid(unsigned int bus, unsigned int cs)
154{
155 /* Always valid */
156 return 1;
157}
158
159void spi_cs_activate(struct spi_slave *slave)
160{
161 /* GPIO 88 low */
Marek Vasut3ba8bf72010-09-09 09:50:39 +0200162 writel((1 << 24), GPCR2);
Marek Vasutbc3a4a52010-04-05 01:50:57 +0200163}
164
165void spi_cs_deactivate(struct spi_slave *slave)
166{
167 /* GPIO 88 high */
Marek Vasut3ba8bf72010-09-09 09:50:39 +0200168 writel((1 << 24), GPSR2);
Marek Vasutbc3a4a52010-04-05 01:50:57 +0200169
170}
171
172void lcd_start(void)
173{
174 int i;
175 unsigned char reg[3] = { 0x74, 0x00, 0 };
176 unsigned char data[3] = { 0x76, 0, 0 };
177 unsigned char dummy[3] = { 0, 0, 0 };
178
179 /* PWM2 AF */
Marek Vasut3ba8bf72010-09-09 09:50:39 +0200180 writel(readl(GAFR0_L) | 0x00800000, GAFR0_L);
Marek Vasutbc3a4a52010-04-05 01:50:57 +0200181 /* Enable clock to all PWM */
Marek Vasut3ba8bf72010-09-09 09:50:39 +0200182 writel(readl(CKEN) | 0x3, CKEN);
Marek Vasutbc3a4a52010-04-05 01:50:57 +0200183 /* Configure PWM2 */
Marek Vasut3ba8bf72010-09-09 09:50:39 +0200184 writel(0x4f, PWM_CTRL2);
185 writel(0x2ff, PWM_PWDUTY2);
186 writel(792, PWM_PERVAL2);
Marek Vasutbc3a4a52010-04-05 01:50:57 +0200187
188 /* Toggle the reset pin to reset the LCD */
Marek Vasut3ba8bf72010-09-09 09:50:39 +0200189 writel((1 << 19), GPSR0);
Marek Vasutbc3a4a52010-04-05 01:50:57 +0200190 udelay(100000);
Marek Vasut3ba8bf72010-09-09 09:50:39 +0200191 writel((1 << 19), GPCR0);
Marek Vasutbc3a4a52010-04-05 01:50:57 +0200192 udelay(20000);
Marek Vasut3ba8bf72010-09-09 09:50:39 +0200193 writel((1 << 19), GPSR0);
Marek Vasutbc3a4a52010-04-05 01:50:57 +0200194 udelay(20000);
195
196 /* Program the LCD init sequence */
197 for (i = 0; i < sizeof(lcd_data) / sizeof(lcd_data[0]); i++) {
198 reg[0] = 0x74;
199 reg[1] = 0x0;
200 reg[2] = lcd_data[i].reg;
201 spi_xfer(NULL, 24, reg, dummy, SPI_XFER_BEGIN | SPI_XFER_END);
202
203 data[0] = 0x76;
204 data[1] = lcd_data[i].data >> 8;
205 data[2] = lcd_data[i].data & 0xff;
206 spi_xfer(NULL, 24, data, dummy, SPI_XFER_BEGIN | SPI_XFER_END);
207
208 if (lcd_data[i].mdelay)
209 udelay(lcd_data[i].mdelay * 1000);
210 }
211
Marek Vasut3ba8bf72010-09-09 09:50:39 +0200212 writel((1 << 11), GPSR0);
Marek Vasutbc3a4a52010-04-05 01:50:57 +0200213}
214#endif