Tom Rini | 83d290c | 2018-05-06 17:58:06 -0400 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0+ |
Peng Fan | 896d2e8 | 2017-04-13 14:09:50 +0800 | [diff] [blame] | 2 | /* |
| 3 | * Copyright 2017 NXP |
Peng Fan | 896d2e8 | 2017-04-13 14:09:50 +0800 | [diff] [blame] | 4 | */ |
| 5 | |
| 6 | /dts-v1/; |
| 7 | |
| 8 | #include "imx7d.dtsi" |
| 9 | |
| 10 | / { |
| 11 | model = "Freescale i.MX7 SabreSD Board"; |
| 12 | compatible = "fsl,imx7d-sdb", "fsl,imx7d"; |
| 13 | |
Ye Li | 3b82335 | 2018-06-27 19:30:53 -0700 | [diff] [blame] | 14 | aliases { |
| 15 | spi5 = &soft_spi; |
| 16 | }; |
| 17 | |
Peng Fan | 896d2e8 | 2017-04-13 14:09:50 +0800 | [diff] [blame] | 18 | memory { |
| 19 | reg = <0x80000000 0x80000000>; |
| 20 | }; |
| 21 | |
Ye Li | 3b82335 | 2018-06-27 19:30:53 -0700 | [diff] [blame] | 22 | soft_spi: soft-spi { |
Peng Fan | 9880eed | 2017-04-13 14:09:51 +0800 | [diff] [blame] | 23 | compatible = "spi-gpio"; |
| 24 | pinctrl-names = "default"; |
| 25 | pinctrl-0 = <&pinctrl_spi1>; |
| 26 | status = "okay"; |
| 27 | gpio-sck = <&gpio1 13 0>; |
| 28 | gpio-mosi = <&gpio1 9 0>; |
| 29 | cs-gpios = <&gpio1 12 0>; |
| 30 | num-chipselects = <1>; |
| 31 | #address-cells = <1>; |
| 32 | #size-cells = <0>; |
| 33 | |
| 34 | gpio_spi: gpio_spi@0 { |
| 35 | compatible = "fairchild,74hc595"; |
| 36 | gpio-controller; |
| 37 | #gpio-cells = <2>; |
| 38 | reg = <0>; |
| 39 | registers-number = <1>; |
| 40 | registers-default = /bits/ 8 <0x74>; /* Enable PERI_3V3, SENSOR_RST_B and HDMI_RST*/ |
| 41 | spi-max-frequency = <100000>; |
| 42 | }; |
| 43 | }; |
Peng Fan | 63f3401 | 2017-04-13 14:09:52 +0800 | [diff] [blame] | 44 | |
| 45 | regulators { |
| 46 | compatible = "simple-bus"; |
| 47 | #address-cells = <1>; |
| 48 | #size-cells = <0>; |
| 49 | |
| 50 | reg_usb_otg1_vbus: regulator@0 { |
| 51 | compatible = "regulator-fixed"; |
| 52 | reg = <0>; |
| 53 | regulator-name = "usb_otg1_vbus"; |
| 54 | regulator-min-microvolt = <5000000>; |
| 55 | regulator-max-microvolt = <5000000>; |
| 56 | gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>; |
| 57 | enable-active-high; |
| 58 | }; |
| 59 | |
| 60 | reg_usb_otg2_vbus: regulator@1 { |
| 61 | compatible = "regulator-fixed"; |
| 62 | reg = <1>; |
| 63 | regulator-name = "usb_otg2_vbus"; |
| 64 | regulator-min-microvolt = <5000000>; |
| 65 | regulator-max-microvolt = <5000000>; |
| 66 | gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>; |
| 67 | enable-active-high; |
| 68 | }; |
| 69 | |
| 70 | reg_sd1_vmmc: regulator@3 { |
| 71 | compatible = "regulator-fixed"; |
| 72 | regulator-name = "VDD_SD1"; |
| 73 | regulator-min-microvolt = <3300000>; |
| 74 | regulator-max-microvolt = <3300000>; |
| 75 | gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>; |
| 76 | startup-delay-us = <200000>; |
| 77 | enable-active-high; |
| 78 | }; |
| 79 | }; |
Peng Fan | 9880eed | 2017-04-13 14:09:51 +0800 | [diff] [blame] | 80 | }; |
| 81 | |
| 82 | &iomuxc { |
| 83 | imx7d-sdb { |
| 84 | pinctrl_spi1: spi1grp { |
| 85 | fsl,pins = < |
| 86 | MX7D_PAD_GPIO1_IO09__GPIO1_IO9 0x59 |
| 87 | MX7D_PAD_GPIO1_IO12__GPIO1_IO12 0x59 |
| 88 | MX7D_PAD_GPIO1_IO13__GPIO1_IO13 0x59 |
| 89 | >; |
| 90 | }; |
Peng Fan | 9880eed | 2017-04-13 14:09:51 +0800 | [diff] [blame] | 91 | |
Peng Fan | 00ad3a9 | 2017-04-13 14:09:53 +0800 | [diff] [blame] | 92 | pinctrl_i2c1: i2c1grp { |
| 93 | fsl,pins = < |
| 94 | MX7D_PAD_I2C1_SDA__I2C1_SDA 0x4000007f |
| 95 | MX7D_PAD_I2C1_SCL__I2C1_SCL 0x4000007f |
| 96 | >; |
| 97 | }; |
| 98 | |
| 99 | pinctrl_i2c2: i2c2grp { |
| 100 | fsl,pins = < |
| 101 | MX7D_PAD_I2C2_SDA__I2C2_SDA 0x4000007f |
| 102 | MX7D_PAD_I2C2_SCL__I2C2_SCL 0x4000007f |
| 103 | >; |
| 104 | }; |
| 105 | |
| 106 | pinctrl_i2c3: i2c3grp { |
| 107 | fsl,pins = < |
| 108 | MX7D_PAD_I2C3_SDA__I2C3_SDA 0x4000007f |
| 109 | MX7D_PAD_I2C3_SCL__I2C3_SCL 0x4000007f |
| 110 | >; |
| 111 | }; |
| 112 | |
| 113 | pinctrl_i2c4: i2c4grp { |
| 114 | fsl,pins = < |
| 115 | MX7D_PAD_SAI1_RX_BCLK__I2C4_SDA 0x4000007f |
| 116 | MX7D_PAD_SAI1_RX_SYNC__I2C4_SCL 0x4000007f |
| 117 | >; |
| 118 | }; |
Peng Fan | e02ec19 | 2017-04-13 14:09:54 +0800 | [diff] [blame] | 119 | |
| 120 | pinctrl_usdhc1_gpio: usdhc1_gpiogrp { |
| 121 | fsl,pins = < |
| 122 | MX7D_PAD_SD1_CD_B__GPIO5_IO0 0x59 /* CD */ |
| 123 | MX7D_PAD_SD1_WP__GPIO5_IO1 0x59 /* WP */ |
| 124 | MX7D_PAD_SD1_RESET_B__GPIO5_IO2 0x59 /* vmmc */ |
| 125 | MX7D_PAD_GPIO1_IO08__SD1_VSELECT 0x59 /* VSELECT */ |
| 126 | >; |
| 127 | }; |
| 128 | |
| 129 | pinctrl_usdhc1: usdhc1grp { |
| 130 | fsl,pins = < |
| 131 | MX7D_PAD_SD1_CMD__SD1_CMD 0x59 |
| 132 | MX7D_PAD_SD1_CLK__SD1_CLK 0x19 |
| 133 | MX7D_PAD_SD1_DATA0__SD1_DATA0 0x59 |
| 134 | MX7D_PAD_SD1_DATA1__SD1_DATA1 0x59 |
| 135 | MX7D_PAD_SD1_DATA2__SD1_DATA2 0x59 |
| 136 | MX7D_PAD_SD1_DATA3__SD1_DATA3 0x59 |
| 137 | >; |
| 138 | }; |
| 139 | |
Peng Fan | 893d98d | 2018-01-21 19:00:23 +0800 | [diff] [blame] | 140 | pinctrl_usdhc1_100mhz: usdhc1grp_100mhz { |
| 141 | fsl,pins = < |
| 142 | MX7D_PAD_SD1_CMD__SD1_CMD 0x5a |
| 143 | MX7D_PAD_SD1_CLK__SD1_CLK 0x1a |
| 144 | MX7D_PAD_SD1_DATA0__SD1_DATA0 0x5a |
| 145 | MX7D_PAD_SD1_DATA1__SD1_DATA1 0x5a |
| 146 | MX7D_PAD_SD1_DATA2__SD1_DATA2 0x5a |
| 147 | MX7D_PAD_SD1_DATA3__SD1_DATA3 0x5a |
| 148 | >; |
| 149 | }; |
| 150 | |
| 151 | pinctrl_usdhc1_200mhz: usdhc1grp_200mhz { |
| 152 | fsl,pins = < |
| 153 | MX7D_PAD_SD1_CMD__SD1_CMD 0x5b |
| 154 | MX7D_PAD_SD1_CLK__SD1_CLK 0x1b |
| 155 | MX7D_PAD_SD1_DATA0__SD1_DATA0 0x5b |
| 156 | MX7D_PAD_SD1_DATA1__SD1_DATA1 0x5b |
| 157 | MX7D_PAD_SD1_DATA2__SD1_DATA2 0x5b |
| 158 | MX7D_PAD_SD1_DATA3__SD1_DATA3 0x5b |
| 159 | >; |
| 160 | }; |
| 161 | |
Peng Fan | e02ec19 | 2017-04-13 14:09:54 +0800 | [diff] [blame] | 162 | pinctrl_usdhc2: usdhc2grp { |
| 163 | fsl,pins = < |
| 164 | MX7D_PAD_SD2_CMD__SD2_CMD 0x59 |
| 165 | MX7D_PAD_SD2_CLK__SD2_CLK 0x19 |
| 166 | MX7D_PAD_SD2_DATA0__SD2_DATA0 0x59 |
| 167 | MX7D_PAD_SD2_DATA1__SD2_DATA1 0x59 |
| 168 | MX7D_PAD_SD2_DATA2__SD2_DATA2 0x59 |
| 169 | MX7D_PAD_SD2_DATA3__SD2_DATA3 0x59 |
| 170 | MX7D_PAD_ECSPI2_MOSI__GPIO4_IO21 0x19 /* WL_REG_ON */ |
| 171 | MX7D_PAD_ECSPI2_SCLK__GPIO4_IO20 0x19 /* WL_HOST_WAKE */ |
| 172 | >; |
| 173 | }; |
| 174 | |
Peng Fan | 893d98d | 2018-01-21 19:00:23 +0800 | [diff] [blame] | 175 | pinctrl_usdhc2_100mhz: usdhc2grp_100mhz { |
| 176 | fsl,pins = < |
| 177 | MX7D_PAD_SD2_CMD__SD2_CMD 0x5a |
| 178 | MX7D_PAD_SD2_CLK__SD2_CLK 0x1a |
| 179 | MX7D_PAD_SD2_DATA0__SD2_DATA0 0x5a |
| 180 | MX7D_PAD_SD2_DATA1__SD2_DATA1 0x5a |
| 181 | MX7D_PAD_SD2_DATA2__SD2_DATA2 0x5a |
| 182 | MX7D_PAD_SD2_DATA3__SD2_DATA3 0x5a |
| 183 | >; |
| 184 | }; |
| 185 | |
| 186 | pinctrl_usdhc2_200mhz: usdhc2grp_200mhz { |
| 187 | fsl,pins = < |
| 188 | MX7D_PAD_SD2_CMD__SD2_CMD 0x5b |
| 189 | MX7D_PAD_SD2_CLK__SD2_CLK 0x1b |
| 190 | MX7D_PAD_SD2_DATA0__SD2_DATA0 0x5b |
| 191 | MX7D_PAD_SD2_DATA1__SD2_DATA1 0x5b |
| 192 | MX7D_PAD_SD2_DATA2__SD2_DATA2 0x5b |
| 193 | MX7D_PAD_SD2_DATA3__SD2_DATA3 0x5b |
| 194 | >; |
| 195 | }; |
| 196 | |
Peng Fan | e02ec19 | 2017-04-13 14:09:54 +0800 | [diff] [blame] | 197 | pinctrl_usdhc3: usdhc3grp { |
| 198 | fsl,pins = < |
| 199 | MX7D_PAD_SD3_CMD__SD3_CMD 0x59 |
| 200 | MX7D_PAD_SD3_CLK__SD3_CLK 0x19 |
| 201 | MX7D_PAD_SD3_DATA0__SD3_DATA0 0x59 |
| 202 | MX7D_PAD_SD3_DATA1__SD3_DATA1 0x59 |
| 203 | MX7D_PAD_SD3_DATA2__SD3_DATA2 0x59 |
| 204 | MX7D_PAD_SD3_DATA3__SD3_DATA3 0x59 |
| 205 | MX7D_PAD_SD3_DATA4__SD3_DATA4 0x59 |
| 206 | MX7D_PAD_SD3_DATA5__SD3_DATA5 0x59 |
| 207 | MX7D_PAD_SD3_DATA6__SD3_DATA6 0x59 |
| 208 | MX7D_PAD_SD3_DATA7__SD3_DATA7 0x59 |
| 209 | MX7D_PAD_SD3_STROBE__SD3_STROBE 0x19 |
| 210 | >; |
| 211 | }; |
Peng Fan | 893d98d | 2018-01-21 19:00:23 +0800 | [diff] [blame] | 212 | |
| 213 | pinctrl_usdhc3_100mhz: usdhc3grp_100mhz { |
| 214 | fsl,pins = < |
| 215 | MX7D_PAD_SD3_CMD__SD3_CMD 0x5a |
| 216 | MX7D_PAD_SD3_CLK__SD3_CLK 0x1a |
| 217 | MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5a |
| 218 | MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5a |
| 219 | MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5a |
| 220 | MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5a |
| 221 | MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5a |
| 222 | MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5a |
| 223 | MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5a |
| 224 | MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5a |
| 225 | MX7D_PAD_SD3_STROBE__SD3_STROBE 0x1a |
| 226 | >; |
| 227 | }; |
| 228 | |
| 229 | pinctrl_usdhc3_200mhz: usdhc3grp_200mhz { |
| 230 | fsl,pins = < |
| 231 | MX7D_PAD_SD3_CMD__SD3_CMD 0x5b |
| 232 | MX7D_PAD_SD3_CLK__SD3_CLK 0x1b |
| 233 | MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5b |
| 234 | MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5b |
| 235 | MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5b |
| 236 | MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5b |
| 237 | MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5b |
| 238 | MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5b |
| 239 | MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5b |
| 240 | MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5b |
| 241 | MX7D_PAD_SD3_STROBE__SD3_STROBE 0x1b |
| 242 | >; |
| 243 | }; |
Peng Fan | 00ad3a9 | 2017-04-13 14:09:53 +0800 | [diff] [blame] | 244 | }; |
| 245 | }; |
| 246 | |
| 247 | &i2c1 { |
| 248 | clock-frequency = <100000>; |
| 249 | pinctrl-names = "default"; |
| 250 | pinctrl-0 = <&pinctrl_i2c1>; |
| 251 | status = "okay"; |
| 252 | |
| 253 | pmic: pfuze3000@08 { |
| 254 | compatible = "fsl,pfuze3000"; |
| 255 | reg = <0x08>; |
| 256 | |
| 257 | regulators { |
| 258 | sw1a_reg: sw1a { |
| 259 | regulator-min-microvolt = <700000>; |
| 260 | regulator-max-microvolt = <3300000>; |
| 261 | regulator-boot-on; |
| 262 | regulator-always-on; |
| 263 | regulator-ramp-delay = <6250>; |
| 264 | }; |
| 265 | |
| 266 | /* use sw1c_reg to align with pfuze100/pfuze200 */ |
| 267 | sw1c_reg: sw1b { |
| 268 | regulator-min-microvolt = <700000>; |
| 269 | regulator-max-microvolt = <1475000>; |
| 270 | regulator-boot-on; |
| 271 | regulator-always-on; |
| 272 | regulator-ramp-delay = <6250>; |
| 273 | }; |
| 274 | |
| 275 | sw2_reg: sw2 { |
| 276 | regulator-min-microvolt = <1500000>; |
| 277 | regulator-max-microvolt = <1850000>; |
| 278 | regulator-boot-on; |
| 279 | regulator-always-on; |
| 280 | }; |
| 281 | |
| 282 | sw3a_reg: sw3 { |
| 283 | regulator-min-microvolt = <900000>; |
| 284 | regulator-max-microvolt = <1650000>; |
| 285 | regulator-boot-on; |
| 286 | regulator-always-on; |
| 287 | }; |
| 288 | |
| 289 | swbst_reg: swbst { |
| 290 | regulator-min-microvolt = <5000000>; |
| 291 | regulator-max-microvolt = <5150000>; |
| 292 | }; |
| 293 | |
| 294 | snvs_reg: vsnvs { |
| 295 | regulator-min-microvolt = <1000000>; |
| 296 | regulator-max-microvolt = <3000000>; |
| 297 | regulator-boot-on; |
| 298 | regulator-always-on; |
| 299 | }; |
| 300 | |
| 301 | vref_reg: vrefddr { |
| 302 | regulator-boot-on; |
| 303 | regulator-always-on; |
| 304 | }; |
| 305 | |
| 306 | vgen1_reg: vldo1 { |
| 307 | regulator-min-microvolt = <1800000>; |
| 308 | regulator-max-microvolt = <3300000>; |
| 309 | regulator-always-on; |
| 310 | }; |
| 311 | |
| 312 | vgen2_reg: vldo2 { |
| 313 | regulator-min-microvolt = <800000>; |
| 314 | regulator-max-microvolt = <1550000>; |
| 315 | regulator-always-on; |
| 316 | }; |
| 317 | |
| 318 | vgen3_reg: vccsd { |
| 319 | regulator-min-microvolt = <2850000>; |
| 320 | regulator-max-microvolt = <3300000>; |
| 321 | regulator-always-on; |
| 322 | }; |
| 323 | |
| 324 | vgen4_reg: v33 { |
| 325 | regulator-min-microvolt = <2850000>; |
| 326 | regulator-max-microvolt = <3300000>; |
| 327 | regulator-always-on; |
| 328 | }; |
| 329 | |
| 330 | vgen5_reg: vldo3 { |
| 331 | regulator-min-microvolt = <1800000>; |
| 332 | regulator-max-microvolt = <3300000>; |
| 333 | regulator-always-on; |
| 334 | }; |
| 335 | |
| 336 | vgen6_reg: vldo4 { |
| 337 | regulator-min-microvolt = <1800000>; |
| 338 | regulator-max-microvolt = <3300000>; |
| 339 | regulator-always-on; |
| 340 | }; |
| 341 | }; |
| 342 | }; |
| 343 | }; |
| 344 | |
| 345 | &i2c2 { |
| 346 | clock-frequency = <100000>; |
| 347 | pinctrl-names = "default"; |
| 348 | pinctrl-0 = <&pinctrl_i2c2>; |
| 349 | status = "okay"; |
| 350 | }; |
| 351 | |
| 352 | &i2c3 { |
| 353 | clock-frequency = <100000>; |
| 354 | pinctrl-names = "default"; |
| 355 | pinctrl-0 = <&pinctrl_i2c3>; |
| 356 | status = "okay"; |
| 357 | }; |
| 358 | |
| 359 | &i2c4 { |
| 360 | clock-frequency = <100000>; |
| 361 | pinctrl-names = "default"; |
| 362 | pinctrl-0 = <&pinctrl_i2c4>; |
| 363 | status = "okay"; |
Peng Fan | 896d2e8 | 2017-04-13 14:09:50 +0800 | [diff] [blame] | 364 | }; |
Peng Fan | e02ec19 | 2017-04-13 14:09:54 +0800 | [diff] [blame] | 365 | |
| 366 | &usdhc1 { |
| 367 | pinctrl-names = "default", "state_100mhz", "state_200mhz"; |
| 368 | pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_usdhc1_gpio>; |
Peng Fan | 893d98d | 2018-01-21 19:00:23 +0800 | [diff] [blame] | 369 | pinctrl-1 = <&pinctrl_usdhc1_100mhz>, <&pinctrl_usdhc1_gpio>; |
| 370 | pinctrl-2 = <&pinctrl_usdhc1_200mhz>, <&pinctrl_usdhc1_gpio>; |
Peng Fan | e02ec19 | 2017-04-13 14:09:54 +0800 | [diff] [blame] | 371 | cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; |
| 372 | wp-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; |
| 373 | vmmc-supply = <®_sd1_vmmc>; |
Peng Fan | 893d98d | 2018-01-21 19:00:23 +0800 | [diff] [blame] | 374 | fsl,tuning-start-tap = <20>; |
| 375 | fsl,tuning-step= <2>; |
Peng Fan | e02ec19 | 2017-04-13 14:09:54 +0800 | [diff] [blame] | 376 | status = "okay"; |
| 377 | }; |
| 378 | |
| 379 | &usdhc2 { |
| 380 | pinctrl-names = "default", "state_100mhz", "state_200mhz"; |
| 381 | pinctrl-0 = <&pinctrl_usdhc2>; |
Peng Fan | 893d98d | 2018-01-21 19:00:23 +0800 | [diff] [blame] | 382 | pinctrl-1 = <&pinctrl_usdhc2_100mhz>; |
| 383 | pinctrl-2 = <&pinctrl_usdhc2_200mhz>; |
Peng Fan | e02ec19 | 2017-04-13 14:09:54 +0800 | [diff] [blame] | 384 | non-removable; |
Peng Fan | 893d98d | 2018-01-21 19:00:23 +0800 | [diff] [blame] | 385 | fsl,tuning-start-tap = <20>; |
| 386 | fsl,tuning-step= <2>; |
Peng Fan | e02ec19 | 2017-04-13 14:09:54 +0800 | [diff] [blame] | 387 | status = "okay"; |
| 388 | }; |
| 389 | |
| 390 | &usdhc3 { |
| 391 | pinctrl-names = "default", "state_100mhz", "state_200mhz"; |
| 392 | pinctrl-0 = <&pinctrl_usdhc3>; |
Peng Fan | 893d98d | 2018-01-21 19:00:23 +0800 | [diff] [blame] | 393 | pinctrl-1 = <&pinctrl_usdhc3_100mhz>; |
| 394 | pinctrl-2 = <&pinctrl_usdhc3_200mhz>; |
Peng Fan | e02ec19 | 2017-04-13 14:09:54 +0800 | [diff] [blame] | 395 | bus-width = <8>; |
| 396 | non-removable; |
Peng Fan | 893d98d | 2018-01-21 19:00:23 +0800 | [diff] [blame] | 397 | fsl,tuning-start-tap = <20>; |
| 398 | fsl,tuning-step= <2>; |
Peng Fan | e02ec19 | 2017-04-13 14:09:54 +0800 | [diff] [blame] | 399 | status = "okay"; |
| 400 | }; |