Padmarao Begari | 0dc0d1e | 2021-11-17 18:21:16 +0530 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0+ |
| 2 | /* |
| 3 | * Microchip I2C controller driver |
| 4 | * |
| 5 | * Copyright (C) 2021 Microchip Technology Inc. |
| 6 | * Padmarao Begari <padmarao.begari@microchip.com> |
| 7 | */ |
| 8 | #include <common.h> |
| 9 | #include <clk.h> |
| 10 | #include <dm.h> |
| 11 | #include <i2c.h> |
| 12 | #include <asm/io.h> |
| 13 | #include <dm/device_compat.h> |
| 14 | #include <linux/bitops.h> |
| 15 | #include <linux/delay.h> |
| 16 | #include <linux/err.h> |
| 17 | |
| 18 | #define MICROCHIP_I2C_TIMEOUT (1000 * 60) |
| 19 | |
| 20 | #define MPFS_I2C_CTRL (0x00) |
| 21 | #define CTRL_CR0 (0x00) |
| 22 | #define CTRL_CR1 (0x01) |
| 23 | #define CTRL_AA BIT(2) |
| 24 | #define CTRL_SI BIT(3) |
| 25 | #define CTRL_STO BIT(4) |
| 26 | #define CTRL_STA BIT(5) |
| 27 | #define CTRL_ENS1 BIT(6) |
| 28 | #define CTRL_CR2 (0x07) |
| 29 | #define MPFS_I2C_STATUS (0x04) |
| 30 | #define STATUS_BUS_ERROR (0x00) |
| 31 | #define STATUS_M_START_SENT (0x08) |
| 32 | #define STATUS_M_REPEATED_START_SENT (0x10) |
| 33 | #define STATUS_M_SLAW_ACK (0x18) |
| 34 | #define STATUS_M_SLAW_NACK (0x20) |
| 35 | #define STATUS_M_TX_DATA_ACK (0x28) |
| 36 | #define STATUS_M_TX_DATA_NACK (0x30) |
| 37 | #define STATUS_M_ARB_LOST (0x38) |
| 38 | #define STATUS_M_SLAR_ACK (0x40) |
| 39 | #define STATUS_M_SLAR_NACK (0x48) |
| 40 | #define STATUS_M_RX_DATA_ACKED (0x50) |
| 41 | #define STATUS_M_RX_DATA_NACKED (0x58) |
| 42 | #define STATUS_S_SLAW_ACKED (0x60) |
| 43 | #define STATUS_S_ARB_LOST_SLAW_ACKED (0x68) |
| 44 | #define STATUS_S_GENERAL_CALL_ACKED (0x70) |
| 45 | #define STATUS_S_ARB_LOST_GENERAL_CALL_ACKED (0x78) |
| 46 | #define STATUS_S_RX_DATA_ACKED (0x80) |
| 47 | #define STATUS_S_RX_DATA_NACKED (0x88) |
| 48 | #define STATUS_S_GENERAL_CALL_RX_DATA_ACKED (0x90) |
| 49 | #define STATUS_S_GENERAL_CALL_RX_DATA_NACKED (0x98) |
| 50 | #define STATUS_S_RX_STOP (0xA0) |
| 51 | #define STATUS_S_SLAR_ACKED (0xA8) |
| 52 | #define STATUS_S_ARB_LOST_SLAR_ACKED (0xB0) |
| 53 | #define STATUS_S_TX_DATA_ACK (0xb8) |
| 54 | #define STATUS_S_TX_DATA_NACK (0xC0) |
| 55 | #define STATUS_LAST_DATA_ACK (0xC8) |
| 56 | #define STATUS_M_SMB_MASTER_RESET (0xD0) |
| 57 | #define STATUS_S_SCL_LOW_TIMEOUT (0xD8) |
| 58 | #define STATUS_NO_STATE_INFO (0xF8) |
| 59 | #define MPFS_I2C_DATA (0x08) |
| 60 | #define MPFS_I2C_SLAVE0_ADDR (0x0c) |
| 61 | #define MPFS_I2C_SMBUS (0x10) |
| 62 | #define MPFS_I2C_FREQ (0x14) |
| 63 | #define MPFS_I2C_GLITCHREG (0x18) |
| 64 | #define MPFS_I2C_SLAVE1_ADDR (0x1c) |
| 65 | |
| 66 | #define PCLK_DIV_256 ((0 << CTRL_CR0) | (0 << CTRL_CR1) | (0 << CTRL_CR2)) |
| 67 | #define PCLK_DIV_224 ((1 << CTRL_CR0) | (0 << CTRL_CR1) | (0 << CTRL_CR2)) |
| 68 | #define PCLK_DIV_192 ((0 << CTRL_CR0) | (1 << CTRL_CR1) | (0 << CTRL_CR2)) |
| 69 | #define PCLK_DIV_160 ((1 << CTRL_CR0) | (1 << CTRL_CR1) | (0 << CTRL_CR2)) |
| 70 | #define PCLK_DIV_960 ((0 << CTRL_CR0) | (0 << CTRL_CR1) | (1 << CTRL_CR2)) |
| 71 | #define PCLK_DIV_120 ((1 << CTRL_CR0) | (0 << CTRL_CR1) | (1 << CTRL_CR2)) |
| 72 | #define PCLK_DIV_60 ((0 << CTRL_CR0) | (1 << CTRL_CR1) | (1 << CTRL_CR2)) |
| 73 | #define BCLK_DIV_8 ((1 << CTRL_CR0) | (1 << CTRL_CR1) | (1 << CTRL_CR2)) |
| 74 | #define CLK_MASK ((1 << CTRL_CR0) | (1 << CTRL_CR1) | (1 << CTRL_CR2)) |
| 75 | |
| 76 | /* |
| 77 | * mpfs_i2c_bus - I2C bus context |
| 78 | * @base: pointer to register struct |
| 79 | * @msg_len: number of bytes transferred in msg |
| 80 | * @msg_err: error code for completed message |
| 81 | * @i2c_clk: clock reference for i2c input clock |
| 82 | * @clk_rate: current i2c bus clock rate |
| 83 | * @buf: ptr to msg buffer for easier use. |
| 84 | * @addr: i2c address. |
| 85 | * @isr_status: cached copy of local ISR status. |
| 86 | */ |
| 87 | struct mpfs_i2c_bus { |
| 88 | void __iomem *base; |
| 89 | size_t msg_len; |
| 90 | int msg_err; |
| 91 | struct clk i2c_clk; |
| 92 | u32 clk_rate; |
| 93 | u8 *buf; |
| 94 | u8 addr; |
| 95 | u32 isr_status; |
| 96 | }; |
| 97 | |
| 98 | static inline u8 i2c_8bit_addr_from_msg(const struct i2c_msg *msg) |
| 99 | { |
| 100 | return (msg->addr << 1) | (msg->flags & I2C_M_RD ? 1 : 0); |
| 101 | } |
| 102 | |
| 103 | static void mpfs_i2c_int_clear(struct mpfs_i2c_bus *bus) |
| 104 | { |
| 105 | u8 ctrl = readl(bus->base + MPFS_I2C_CTRL); |
| 106 | |
| 107 | ctrl &= ~CTRL_SI; |
| 108 | writel(ctrl, bus->base + MPFS_I2C_CTRL); |
| 109 | } |
| 110 | |
| 111 | static void mpfs_i2c_core_disable(struct mpfs_i2c_bus *bus) |
| 112 | { |
| 113 | u8 ctrl = readl(bus->base + MPFS_I2C_CTRL); |
| 114 | |
| 115 | ctrl &= ~CTRL_ENS1; |
| 116 | writel(ctrl, bus->base + MPFS_I2C_CTRL); |
| 117 | } |
| 118 | |
| 119 | static void mpfs_i2c_core_enable(struct mpfs_i2c_bus *bus) |
| 120 | { |
| 121 | u8 ctrl = readl(bus->base + MPFS_I2C_CTRL); |
| 122 | |
| 123 | ctrl |= CTRL_ENS1; |
| 124 | writel(ctrl, bus->base + MPFS_I2C_CTRL); |
| 125 | } |
| 126 | |
| 127 | static void mpfs_i2c_reset(struct mpfs_i2c_bus *bus) |
| 128 | { |
| 129 | mpfs_i2c_core_disable(bus); |
| 130 | mpfs_i2c_core_enable(bus); |
| 131 | } |
| 132 | |
| 133 | static inline void mpfs_i2c_stop(struct mpfs_i2c_bus *bus) |
| 134 | { |
| 135 | u8 ctrl = readl(bus->base + MPFS_I2C_CTRL); |
| 136 | |
| 137 | ctrl |= CTRL_STO; |
| 138 | writel(ctrl, bus->base + MPFS_I2C_CTRL); |
| 139 | } |
| 140 | |
| 141 | static inline int mpfs_generate_divisor(u32 rate, u8 *code) |
| 142 | { |
| 143 | int ret = 0; |
| 144 | |
| 145 | if (rate >= 960) |
| 146 | *code = PCLK_DIV_960; |
| 147 | else if (rate >= 256) |
| 148 | *code = PCLK_DIV_256; |
| 149 | else if (rate >= 224) |
| 150 | *code = PCLK_DIV_224; |
| 151 | else if (rate >= 192) |
| 152 | *code = PCLK_DIV_192; |
| 153 | else if (rate >= 160) |
| 154 | *code = PCLK_DIV_160; |
| 155 | else if (rate >= 120) |
| 156 | *code = PCLK_DIV_120; |
| 157 | else if (rate >= 60) |
| 158 | *code = PCLK_DIV_60; |
| 159 | else if (rate >= 8) |
| 160 | *code = BCLK_DIV_8; |
| 161 | else |
| 162 | ret = -EINVAL; |
| 163 | |
| 164 | return ret; |
| 165 | } |
| 166 | |
| 167 | static int mpfs_i2c_init(struct mpfs_i2c_bus *bus, struct udevice *dev) |
| 168 | { |
| 169 | u32 clk_rate, divisor; |
| 170 | u8 clkval, ctrl; |
| 171 | int ret; |
| 172 | |
| 173 | ret = clk_get_by_index(dev, 0, &bus->i2c_clk); |
| 174 | if (ret) |
| 175 | return -EINVAL; |
| 176 | |
| 177 | ret = clk_enable(&bus->i2c_clk); |
| 178 | if (ret) |
| 179 | return ret; |
| 180 | |
| 181 | clk_rate = clk_get_rate(&bus->i2c_clk); |
| 182 | if (!clk_rate) |
| 183 | return -EINVAL; |
| 184 | |
| 185 | clk_free(&bus->i2c_clk); |
| 186 | |
| 187 | divisor = clk_rate / bus->clk_rate; |
| 188 | |
| 189 | ctrl = readl(bus->base + MPFS_I2C_CTRL); |
| 190 | |
| 191 | ctrl &= ~CLK_MASK; |
| 192 | |
| 193 | ret = mpfs_generate_divisor(divisor, &clkval); |
| 194 | if (ret) |
| 195 | return -EINVAL; |
| 196 | |
| 197 | ctrl |= clkval; |
| 198 | |
| 199 | writel(ctrl, bus->base + MPFS_I2C_CTRL); |
| 200 | |
| 201 | ctrl = readl(bus->base + MPFS_I2C_CTRL); |
| 202 | |
| 203 | /* Reset I2C core */ |
| 204 | mpfs_i2c_reset(bus); |
| 205 | |
| 206 | return 0; |
| 207 | } |
| 208 | |
| 209 | static void mpfs_i2c_transfer(struct mpfs_i2c_bus *bus, u32 data) |
| 210 | { |
| 211 | if (bus->msg_len > 0) |
| 212 | writel(data, bus->base + MPFS_I2C_DATA); |
| 213 | } |
| 214 | |
| 215 | static void mpfs_i2c_empty_rx(struct mpfs_i2c_bus *bus) |
| 216 | { |
| 217 | u8 ctrl; |
| 218 | u8 data_read; |
| 219 | |
| 220 | if (bus->msg_len > 0) { |
| 221 | data_read = readl(bus->base + MPFS_I2C_DATA); |
| 222 | *bus->buf++ = data_read; |
| 223 | bus->msg_len--; |
| 224 | } |
| 225 | |
| 226 | if (bus->msg_len == 0) { |
| 227 | ctrl = readl(bus->base + MPFS_I2C_CTRL); |
| 228 | ctrl &= ~CTRL_AA; |
| 229 | writel(ctrl, bus->base + MPFS_I2C_CTRL); |
| 230 | } |
| 231 | } |
| 232 | |
| 233 | static int mpfs_i2c_fill_tx(struct mpfs_i2c_bus *bus) |
| 234 | { |
| 235 | mpfs_i2c_transfer(bus, *bus->buf++); |
| 236 | bus->msg_len--; |
| 237 | |
| 238 | return 0; |
| 239 | } |
| 240 | |
| 241 | static int mpfs_i2c_service_handler(struct mpfs_i2c_bus *bus) |
| 242 | { |
| 243 | bool finish = false; |
| 244 | u32 status; |
| 245 | u8 ctrl; |
| 246 | |
| 247 | status = bus->isr_status; |
| 248 | |
| 249 | switch (status) { |
| 250 | case STATUS_M_START_SENT: |
| 251 | case STATUS_M_REPEATED_START_SENT: |
| 252 | ctrl = readl(bus->base + MPFS_I2C_CTRL); |
| 253 | ctrl &= ~CTRL_STA; |
| 254 | writel(bus->addr, bus->base + MPFS_I2C_DATA); |
| 255 | writel(ctrl, bus->base + MPFS_I2C_CTRL); |
| 256 | break; |
| 257 | case STATUS_M_SLAW_ACK: |
| 258 | case STATUS_M_TX_DATA_ACK: |
| 259 | if (bus->msg_len > 0) { |
| 260 | mpfs_i2c_fill_tx(bus); |
| 261 | } else { |
| 262 | /* On the last byte to be transmitted, send STOP */ |
| 263 | mpfs_i2c_stop(bus); |
| 264 | finish = true; |
| 265 | } |
| 266 | break; |
| 267 | case STATUS_M_SLAR_ACK: |
| 268 | ctrl = readl(bus->base + MPFS_I2C_CTRL); |
| 269 | ctrl |= CTRL_AA; |
| 270 | writel(ctrl, bus->base + MPFS_I2C_CTRL); |
| 271 | if (bus->msg_len == 0) { |
| 272 | /* On the last byte to be transmitted, send STOP */ |
| 273 | mpfs_i2c_stop(bus); |
| 274 | finish = true; |
| 275 | } |
| 276 | break; |
| 277 | case STATUS_M_RX_DATA_ACKED: |
| 278 | mpfs_i2c_empty_rx(bus); |
| 279 | if (bus->msg_len == 0) { |
| 280 | /* On the last byte to be transmitted, send STOP */ |
| 281 | mpfs_i2c_stop(bus); |
| 282 | finish = true; |
| 283 | } |
| 284 | break; |
| 285 | case STATUS_M_TX_DATA_NACK: |
| 286 | case STATUS_M_RX_DATA_NACKED: |
| 287 | case STATUS_M_SLAR_NACK: |
| 288 | case STATUS_M_SLAW_NACK: |
| 289 | bus->msg_err = -ENXIO; |
| 290 | mpfs_i2c_stop(bus); |
| 291 | finish = true; |
| 292 | break; |
| 293 | |
| 294 | case STATUS_M_ARB_LOST: |
| 295 | /* Handle Lost Arbitration */ |
| 296 | bus->msg_err = -EAGAIN; |
| 297 | finish = true; |
| 298 | break; |
| 299 | default: |
| 300 | break; |
| 301 | } |
| 302 | |
| 303 | if (finish) { |
| 304 | ctrl = readl(bus->base + MPFS_I2C_CTRL); |
| 305 | ctrl &= ~CTRL_AA; |
| 306 | writel(ctrl, bus->base + MPFS_I2C_CTRL); |
| 307 | return 0; |
| 308 | } |
| 309 | |
| 310 | return 1; |
| 311 | } |
| 312 | |
| 313 | static int mpfs_i2c_service(struct mpfs_i2c_bus *bus) |
| 314 | { |
| 315 | int ret = 0; |
| 316 | int si_bit; |
| 317 | |
| 318 | si_bit = readl(bus->base + MPFS_I2C_CTRL); |
| 319 | if (si_bit & CTRL_SI) { |
| 320 | bus->isr_status = readl(bus->base + MPFS_I2C_STATUS); |
| 321 | ret = mpfs_i2c_service_handler(bus); |
| 322 | } |
| 323 | /* Clear the si flag */ |
| 324 | mpfs_i2c_int_clear(bus); |
| 325 | si_bit = readl(bus->base + MPFS_I2C_CTRL); |
| 326 | |
| 327 | return ret; |
| 328 | } |
| 329 | |
| 330 | static int mpfs_i2c_check_service_change(struct mpfs_i2c_bus *bus) |
| 331 | { |
| 332 | u8 ctrl; |
| 333 | u32 count = 0; |
| 334 | |
| 335 | while (1) { |
| 336 | ctrl = readl(bus->base + MPFS_I2C_CTRL); |
| 337 | if (ctrl & CTRL_SI) |
| 338 | break; |
| 339 | udelay(1); |
| 340 | count += 1; |
| 341 | if (count == MICROCHIP_I2C_TIMEOUT) |
| 342 | return -ETIMEDOUT; |
| 343 | } |
| 344 | return 0; |
| 345 | } |
| 346 | |
| 347 | static int mpfs_i2c_poll_device(struct mpfs_i2c_bus *bus) |
| 348 | { |
| 349 | int ret; |
| 350 | |
| 351 | while (1) { |
| 352 | ret = mpfs_i2c_check_service_change(bus); |
| 353 | if (ret) |
| 354 | return ret; |
| 355 | |
| 356 | ret = mpfs_i2c_service(bus); |
| 357 | if (!ret) |
| 358 | /* all messages have been transferred */ |
| 359 | return ret; |
| 360 | } |
| 361 | } |
| 362 | |
| 363 | static int mpfs_i2c_xfer_msg(struct mpfs_i2c_bus *bus, struct i2c_msg *msg) |
| 364 | { |
| 365 | u8 ctrl; |
| 366 | int ret; |
| 367 | |
| 368 | if (!msg->len || !msg->buf) |
| 369 | return -EINVAL; |
| 370 | |
| 371 | bus->addr = i2c_8bit_addr_from_msg(msg); |
| 372 | bus->msg_len = msg->len; |
| 373 | bus->buf = msg->buf; |
| 374 | bus->msg_err = 0; |
| 375 | |
| 376 | mpfs_i2c_core_enable(bus); |
| 377 | |
| 378 | ctrl = readl(bus->base + MPFS_I2C_CTRL); |
| 379 | |
| 380 | ctrl |= CTRL_STA; |
| 381 | |
| 382 | writel(ctrl, bus->base + MPFS_I2C_CTRL); |
| 383 | |
| 384 | ret = mpfs_i2c_poll_device(bus); |
| 385 | if (ret) |
| 386 | return ret; |
| 387 | |
| 388 | return bus->msg_err; |
| 389 | } |
| 390 | |
| 391 | static int mpfs_i2c_xfer(struct udevice *dev, struct i2c_msg *msgs, int num_msgs) |
| 392 | { |
| 393 | struct mpfs_i2c_bus *bus = dev_get_priv(dev); |
| 394 | int idx, ret; |
| 395 | |
| 396 | if (!msgs || !num_msgs) |
| 397 | return -EINVAL; |
| 398 | |
| 399 | for (idx = 0; idx < num_msgs; idx++) { |
| 400 | ret = mpfs_i2c_xfer_msg(bus, msgs++); |
| 401 | if (ret) |
| 402 | return ret; |
| 403 | } |
| 404 | |
| 405 | return ret; |
| 406 | } |
| 407 | |
| 408 | static int mpfs_i2c_probe_chip(struct udevice *dev, uint addr, uint flags) |
| 409 | { |
| 410 | struct mpfs_i2c_bus *bus = dev_get_priv(dev); |
| 411 | int ret; |
| 412 | u8 ctrl, reg = 0; |
| 413 | |
| 414 | /* |
| 415 | * Send the chip address and verify that the |
| 416 | * address was <ACK>ed. |
| 417 | */ |
| 418 | bus->addr = addr << 1 | I2C_M_RD; |
| 419 | bus->buf = ® |
| 420 | bus->msg_len = 0; |
| 421 | bus->msg_err = 0; |
| 422 | |
| 423 | mpfs_i2c_core_enable(bus); |
| 424 | |
| 425 | ctrl = readl(bus->base + MPFS_I2C_CTRL); |
| 426 | |
| 427 | ctrl |= CTRL_STA; |
| 428 | |
| 429 | writel(ctrl, bus->base + MPFS_I2C_CTRL); |
| 430 | |
| 431 | ret = mpfs_i2c_poll_device(bus); |
| 432 | if (ret) |
| 433 | return ret; |
| 434 | |
| 435 | return bus->msg_err; |
| 436 | } |
| 437 | |
| 438 | static int mpfs_i2c_probe(struct udevice *dev) |
| 439 | { |
| 440 | int ret; |
| 441 | u32 val; |
| 442 | struct mpfs_i2c_bus *bus = dev_get_priv(dev); |
| 443 | |
| 444 | bus->base = dev_read_addr_ptr(dev); |
| 445 | if (!bus->base) |
| 446 | return -EINVAL; |
| 447 | |
| 448 | val = dev_read_u32(dev, "clock-frequency", &bus->clk_rate); |
| 449 | if (val) { |
| 450 | printf("Default to 100kHz\n"); |
| 451 | /* default clock rate */ |
| 452 | bus->clk_rate = 100000; |
| 453 | } |
| 454 | |
| 455 | if (bus->clk_rate > 400000 || bus->clk_rate <= 0) { |
| 456 | printf("Invalid clock-frequency %d\n", bus->clk_rate); |
| 457 | return -EINVAL; |
| 458 | } |
| 459 | |
| 460 | ret = mpfs_i2c_init(bus, dev); |
| 461 | |
| 462 | return ret; |
| 463 | } |
| 464 | |
| 465 | static const struct dm_i2c_ops mpfs_i2c_ops = { |
| 466 | .xfer = mpfs_i2c_xfer, |
| 467 | .probe_chip = mpfs_i2c_probe_chip, |
| 468 | }; |
| 469 | |
| 470 | static const struct udevice_id mpfs_i2c_ids[] = { |
| 471 | {.compatible = "microchip,mpfs-i2c"}, |
| 472 | {} |
| 473 | }; |
| 474 | |
| 475 | U_BOOT_DRIVER(mpfs_i2c) = { |
| 476 | .name = "mpfs_i2c", |
| 477 | .id = UCLASS_I2C, |
| 478 | .of_match = mpfs_i2c_ids, |
| 479 | .ops = &mpfs_i2c_ops, |
| 480 | .probe = mpfs_i2c_probe, |
| 481 | .priv_auto = sizeof(struct mpfs_i2c_bus), |
| 482 | }; |