blob: 99daef6c5a3db7fc6e1203ea88e1ca2ed0555e79 [file] [log] [blame]
Michael Schwingenaebf00f2008-01-16 19:51:14 +01001/*
2 * (C) Copyright 2007
3 * Michael Schwingen, michael@schwingen.org
4 *
5 * (C) Copyright 2006
6 * Stefan Roese, DENX Software Engineering, sr@denx.de.
7 *
8 * (C) Copyright 2002
9 * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
10 *
11 * (C) Copyright 2002
12 * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
13 * Marius Groeger <mgroeger@sysgo.de>
14 *
15 * See file CREDITS for list of people who contributed to this
16 * project.
17 *
18 * This program is free software; you can redistribute it and/or
19 * modify it under the terms of the GNU General Public License as
20 * published by the Free Software Foundation; either version 2 of
21 * the License, or (at your option) any later version.
22 *
23 * This program is distributed in the hope that it will be useful,
24 * but WITHOUT ANY WARRANTY; without even the implied warranty of
25 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
26 * GNU General Public License for more details.
27 *
28 * You should have received a copy of the GNU General Public License
29 * along with this program; if not, write to the Free Software
30 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
31 * MA 02111-1307 USA
32 */
33
34#include <common.h>
35#include <command.h>
36#include <malloc.h>
37#include <asm/arch/ixp425.h>
38#include <asm/io.h>
39
40#include <miiphy.h>
41
42#include "actux2_hw.h"
43
44DECLARE_GLOBAL_DATA_PTR;
45
46int board_init (void)
47{
48 gd->bd->bi_arch_number = MACH_TYPE_ACTUX2;
49
50 /* adress of boot parameters */
51 gd->bd->bi_boot_params = 0x00000100;
52
53 GPIO_OUTPUT_ENABLE (CFG_GPIO_IORST);
54 GPIO_OUTPUT_ENABLE (CFG_GPIO_ETHRST);
55 GPIO_OUTPUT_ENABLE (CFG_GPIO_DSR);
56 GPIO_OUTPUT_ENABLE (CFG_GPIO_DCD);
57
58 GPIO_OUTPUT_CLEAR (CFG_GPIO_IORST);
59 GPIO_OUTPUT_CLEAR (CFG_GPIO_ETHRST);
60
61 GPIO_OUTPUT_CLEAR (CFG_GPIO_DSR);
62 GPIO_OUTPUT_SET (CFG_GPIO_DCD);
63
64 /* Setup GPIO's for Interrupt inputs */
65 GPIO_OUTPUT_DISABLE (CFG_GPIO_DBGINT);
66 GPIO_OUTPUT_DISABLE (CFG_GPIO_ETHINT);
67
68 /* Setup GPIO's for 33MHz clock output */
69 GPIO_OUTPUT_ENABLE (CFG_GPIO_PCI_CLK);
70 GPIO_OUTPUT_ENABLE (CFG_GPIO_EXTBUS_CLK);
71 *IXP425_GPIO_GPCLKR = 0x011001FF;
72
73 /* CS1: IPAC-X */
74 *IXP425_EXP_CS1 = 0x94d10013;
75 /* CS5: Debug port */
76 *IXP425_EXP_CS5 = 0x9d520003;
77 /* CS6: HW release register */
78 *IXP425_EXP_CS6 = 0x81860001;
79 /* CS7: LEDs */
80 *IXP425_EXP_CS7 = 0x80900003;
81
82 udelay (533);
83 GPIO_OUTPUT_SET (CFG_GPIO_IORST);
84 GPIO_OUTPUT_SET (CFG_GPIO_ETHRST);
85
86 ACTUX2_LED1 (1);
87 ACTUX2_LED2 (0);
88 ACTUX2_LED3 (0);
89 ACTUX2_LED4 (0);
90
91 return 0;
92}
93
94/*
95 * Check Board Identity
96 */
97int checkboard (void)
98{
Michael Schwingenaebf00f2008-01-16 19:51:14 +010099 char *s = getenv ("serial#");
100
101 puts ("Board: AcTux-2 rev.");
102 putc (ACTUX2_BOARDREL + 'A' - 1);
Jean-Christophe PLAGNIOL-VILLARDc9bcf752008-02-25 00:03:10 +0100103
104 if (s != NULL) {
105 puts (", serial# ");
106 puts (s);
107 }
Michael Schwingenaebf00f2008-01-16 19:51:14 +0100108 putc ('\n');
109
110 return (0);
111}
112
113int dram_init (void)
114{
115 gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
116 gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
117
118 return (0);
119}
120
121/*************************************************************************
122 * get_board_rev() - setup to pass kernel board revision information
123 * 0 = reserved
124 * 1 = Rev. A
125 * 2 = Rev. B
126 *************************************************************************/
127u32 get_board_rev (void)
128{
129 return ACTUX2_BOARDREL;
130}
131
132void reset_phy (void)
133{
Michael Schwingenaebf00f2008-01-16 19:51:14 +0100134 /* init IcPlus IP175C ethernet switch to native IP175C mode */
135 miiphy_write ("NPE0", 29, 31, 0x175C);
136}