| Peng Fan | c155f33 | 2020-10-14 17:12:03 +0800 | [diff] [blame] | 1 | .. SPDX-License-Identifier: GPL-2.0+ |
| 2 | |
| 3 | imx8mq_evk |
| 4 | ========== |
| 5 | |
| 6 | U-Boot for the NXP i.MX8MQ EVK board |
| 7 | |
| 8 | Quick Start |
| 9 | ----------- |
| 10 | |
| 11 | - Build the ARM Trusted firmware binary |
| 12 | - Get ddr and hdmi fimware |
| 13 | - Build U-Boot |
| 14 | - Boot |
| 15 | |
| 16 | Get and Build the ARM Trusted firmware |
| 17 | -------------------------------------- |
| 18 | |
| 19 | Note: srctree is U-Boot source directory |
| Fabio Estevam | f0f4612 | 2023-01-12 21:52:23 -0300 | [diff] [blame] | 20 | Get ATF from: https://github.com/nxp-imx/imx-atf |
| Andrey Zhizhikin | 1396e41 | 2020-12-13 20:36:06 +0000 | [diff] [blame] | 21 | branch: imx_5.4.47_2.2.0 |
| Peng Fan | c155f33 | 2020-10-14 17:12:03 +0800 | [diff] [blame] | 22 | |
| 23 | .. code-block:: bash |
| 24 | |
| 25 | $ make PLAT=imx8mq bl31 |
| 26 | $ cp build/imx8mq/release/bl31.bin $(builddir) |
| 27 | |
| 28 | Get the ddr and hdmi firmware |
| 29 | ----------------------------- |
| 30 | |
| 31 | .. code-block:: bash |
| 32 | |
| Andrey Zhizhikin | 1396e41 | 2020-12-13 20:36:06 +0000 | [diff] [blame] | 33 | $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.9.bin |
| 34 | $ chmod +x firmware-imx-8.9.bin |
| 35 | $ ./firmware-imx-8.9.bin |
| 36 | $ cp firmware-imx-8.9/firmware/hdmi/cadence/signed_hdmi_imx8m.bin $(builddir) |
| 37 | $ cp firmware-imx-8.9/firmware/ddr/synopsys/lpddr4*.bin $(builddir) |
| Peng Fan | c155f33 | 2020-10-14 17:12:03 +0800 | [diff] [blame] | 38 | |
| 39 | Build U-Boot |
| 40 | ------------ |
| 41 | |
| 42 | .. code-block:: bash |
| 43 | |
| 44 | $ export CROSS_COMPILE=aarch64-poky-linux- |
| 45 | $ make imx8mq_evk_defconfig |
| Peng Fan | 70e59a0 | 2021-10-22 10:42:20 +0800 | [diff] [blame] | 46 | $ make |
| Peng Fan | c155f33 | 2020-10-14 17:12:03 +0800 | [diff] [blame] | 47 | |
| 48 | Burn the flash.bin to MicroSD card offset 33KB: |
| 49 | |
| 50 | .. code-block:: bash |
| 51 | |
| 52 | $sudo dd if=flash.bin of=/dev/sd[x] bs=1024 seek=33 conv=notrunc |
| Peng Fan | c155f33 | 2020-10-14 17:12:03 +0800 | [diff] [blame] | 53 | |
| 54 | Boot |
| 55 | ---- |
| 56 | Set Boot switch SW801: 1100 and Bmode: 10 to boot from Micro SD. |