blob: b2c36148ba8c8071794281c97e073e2a73aa6cc4 [file] [log] [blame]
Fabio Estevame2d282a2013-03-15 10:43:48 +00001/*
2 * Copyright (C) 2013 Freescale Semiconductor, Inc.
3 *
4 * Configuration settings for the Wandboard.
5 *
Wolfgang Denk1a459662013-07-08 09:37:19 +02006 * SPDX-License-Identifier: GPL-2.0+
Fabio Estevame2d282a2013-03-15 10:43:48 +00007 */
8
9#ifndef __CONFIG_H
10#define __CONFIG_H
11
Eric Nelson02824dc2013-11-26 17:40:30 -070012#include "mx6_common.h"
Fabio Estevame2d282a2013-03-15 10:43:48 +000013#include <asm/arch/imx-regs.h>
14#include <asm/imx-common/gpio.h>
Alexey Brodkin1ace4022014-02-26 17:47:58 +040015#include <linux/sizes.h>
Fabio Estevame2d282a2013-03-15 10:43:48 +000016
17#define CONFIG_MX6
18#define CONFIG_DISPLAY_CPUINFO
19#define CONFIG_DISPLAY_BOARDINFO
20
21#define MACH_TYPE_WANDBOARD 4412
22#define CONFIG_MACH_TYPE MACH_TYPE_WANDBOARD
23
24#define CONFIG_CMDLINE_TAG
25#define CONFIG_SETUP_MEMORY_TAGS
26#define CONFIG_INITRD_TAG
27#define CONFIG_REVISION_TAG
28
Fabio Estevam7f5d0af2014-04-22 15:34:53 -030029#define CONFIG_SYS_GENERIC_BOARD
30
Fabio Estevame2d282a2013-03-15 10:43:48 +000031/* Size of malloc() pool */
Fabio Estevam7bcb9832013-05-23 07:50:23 +000032#define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M)
Fabio Estevame2d282a2013-03-15 10:43:48 +000033
34#define CONFIG_BOARD_EARLY_INIT_F
Otavio Salvadoreaffaa22013-04-19 03:42:03 +000035#define CONFIG_BOARD_LATE_INIT
Fabio Estevame2d282a2013-03-15 10:43:48 +000036#define CONFIG_MXC_GPIO
37
38#define CONFIG_MXC_UART
39#define CONFIG_MXC_UART_BASE UART1_BASE
40
41/* allow to overwrite serial and ethaddr */
42#define CONFIG_ENV_OVERWRITE
43#define CONFIG_CONS_INDEX 1
44#define CONFIG_BAUDRATE 115200
45
46/* Command definition */
47#include <config_cmd_default.h>
48
49#undef CONFIG_CMD_IMLS
50
Otavio Salvadoreaffaa22013-04-19 03:42:03 +000051#define CONFIG_CMD_BMODE
Otavio Salvador0798d572013-04-19 03:42:00 +000052#define CONFIG_CMD_SETEXPR
53
Fabio Estevame2d282a2013-03-15 10:43:48 +000054#define CONFIG_BOOTDELAY 5
55
56#define CONFIG_SYS_MEMTEST_START 0x10000000
57#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 500 * SZ_1M)
58#define CONFIG_LOADADDR 0x12000000
59#define CONFIG_SYS_TEXT_BASE 0x17800000
60
Otavio Salvador8bc7c482014-05-01 19:02:31 -030061/* I2C Configs */
62#define CONFIG_CMD_I2C
63#define CONFIG_SYS_I2C
64#define CONFIG_SYS_I2C_MXC
York Sunf8cb1012015-03-20 10:20:40 -070065#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
Otavio Salvador8bc7c482014-05-01 19:02:31 -030066#define CONFIG_SYS_I2C_SPEED 100000
67
Fabio Estevame2d282a2013-03-15 10:43:48 +000068/* MMC Configuration */
69#define CONFIG_FSL_ESDHC
70#define CONFIG_FSL_USDHC
Otavio Salvador5ed15732013-04-19 03:42:02 +000071#define CONFIG_SYS_FSL_USDHC_NUM 2
Fabio Estevame2d282a2013-03-15 10:43:48 +000072#define CONFIG_SYS_FSL_ESDHC_ADDR 0
Fabio Estevame2d282a2013-03-15 10:43:48 +000073
74#define CONFIG_MMC
75#define CONFIG_CMD_MMC
76#define CONFIG_GENERIC_MMC
77#define CONFIG_BOUNCE_BUFFER
78#define CONFIG_CMD_EXT2
79#define CONFIG_CMD_FAT
80#define CONFIG_DOS_PARTITION
81
Jeroen Hofstee9df47572014-10-23 23:02:01 +020082/* USB Configs */
83#define CONFIG_CMD_USB
84#define CONFIG_USB_EHCI
85#define CONFIG_USB_EHCI_MX6
86#define CONFIG_USB_STORAGE
87#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
88#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
89#define CONFIG_MXC_USB_FLAGS 0
90
Fabio Estevame2d282a2013-03-15 10:43:48 +000091/* Ethernet Configuration */
92#define CONFIG_CMD_PING
93#define CONFIG_CMD_DHCP
94#define CONFIG_CMD_MII
95#define CONFIG_CMD_NET
96#define CONFIG_FEC_MXC
97#define CONFIG_MII
98#define IMX_FEC_BASE ENET_BASE_ADDR
99#define CONFIG_FEC_XCV_TYPE RGMII
100#define CONFIG_ETHPRIME "FEC"
101#define CONFIG_FEC_MXC_PHYADDR 1
102#define CONFIG_PHYLIB
103#define CONFIG_PHY_ATHEROS
104
Fabio Estevam7bcb9832013-05-23 07:50:23 +0000105/* Framebuffer */
106#define CONFIG_VIDEO
107#define CONFIG_VIDEO_IPUV3
108#define CONFIG_CFB_CONSOLE
109#define CONFIG_VGA_AS_SINGLE_DEVICE
110#define CONFIG_SYS_CONSOLE_IS_IN_ENV
111#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
112#define CONFIG_VIDEO_BMP_RLE8
113#define CONFIG_SPLASH_SCREEN
Otavio Salvadora7efb022013-05-27 12:18:44 +0000114#define CONFIG_SPLASH_SCREEN_ALIGN
Fabio Estevam7bcb9832013-05-23 07:50:23 +0000115#define CONFIG_BMP_16BPP
116#define CONFIG_VIDEO_LOGO
Otavio Salvadora7efb022013-05-27 12:18:44 +0000117#define CONFIG_VIDEO_BMP_LOGO
Fabio Estevam7bcb9832013-05-23 07:50:23 +0000118#define CONFIG_IPUV3_CLK 260000000
Otavio Salvador0ef797a2014-05-01 19:02:32 -0300119#define CONFIG_CMD_HDMIDETECT
Pardeep Kumar Singla5ea7f0e2013-07-25 12:12:13 -0500120#define CONFIG_IMX_HDMI
Otavio Salvador8bc7c482014-05-01 19:02:31 -0300121#define CONFIG_IMX_VIDEO_SKIP
Fabio Estevam7bcb9832013-05-23 07:50:23 +0000122
Fabio Estevam9f87640c2014-09-24 15:21:58 -0300123#define CONFIG_CMD_FUSE
124#ifdef CONFIG_CMD_FUSE
125#define CONFIG_MXC_OCOTP
126#endif
127
Fabio Estevamf62cd002013-09-09 18:28:07 -0300128#if defined(CONFIG_MX6DL) || defined(CONFIG_MX6S)
Fabio Estevame2d282a2013-03-15 10:43:48 +0000129#define CONFIG_DEFAULT_FDT_FILE "imx6dl-wandboard.dtb"
Tapani Utriainen491f2942013-06-26 17:51:49 +0800130#elif defined(CONFIG_MX6Q)
131#define CONFIG_DEFAULT_FDT_FILE "imx6q-wandboard.dtb"
Fabio Estevame2d282a2013-03-15 10:43:48 +0000132#endif
133
134#define CONFIG_EXTRA_ENV_SETTINGS \
135 "script=boot.scr\0" \
John Weberf3533972014-01-06 13:27:22 -0200136 "image=zImage\0" \
Fabio Estevame2d282a2013-03-15 10:43:48 +0000137 "console=ttymxc0\0" \
Otavio Salvadord727ab32013-07-20 17:21:19 -0300138 "splashpos=m,m\0" \
Fabio Estevame2d282a2013-03-15 10:43:48 +0000139 "fdt_high=0xffffffff\0" \
140 "initrd_high=0xffffffff\0" \
141 "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
Otavio Salvador6584a1b2013-12-16 20:44:04 -0200142 "fdt_addr=0x18000000\0" \
Fabio Estevame2d282a2013-03-15 10:43:48 +0000143 "boot_fdt=try\0" \
144 "ip_dyn=yes\0" \
Otavio Salvador1e1cbde2013-04-19 03:41:59 +0000145 "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
Otavio Salvador86812c42013-06-28 18:52:42 -0300146 "mmcpart=1\0" \
147 "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
Otavio Salvador0798d572013-04-19 03:42:00 +0000148 "update_sd_firmware_filename=u-boot.imx\0" \
149 "update_sd_firmware=" \
150 "if test ${ip_dyn} = yes; then " \
151 "setenv get_cmd dhcp; " \
152 "else " \
153 "setenv get_cmd tftp; " \
154 "fi; " \
155 "if mmc dev ${mmcdev}; then " \
156 "if ${get_cmd} ${update_sd_firmware_filename}; then " \
157 "setexpr fw_sz ${filesize} / 0x200; " \
158 "setexpr fw_sz ${fw_sz} + 1; " \
159 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
160 "fi; " \
161 "fi\0" \
Fabio Estevame2d282a2013-03-15 10:43:48 +0000162 "mmcargs=setenv bootargs console=${console},${baudrate} " \
Otavio Salvador0ef797a2014-05-01 19:02:32 -0300163 "root=${mmcroot}; run videoargs\0" \
164 "videoargs=" \
165 "setenv nextcon 0; " \
166 "if hdmidet; then " \
167 "setenv bootargs ${bootargs} " \
168 "video=mxcfb${nextcon}:dev=hdmi,1280x720M@60," \
169 "if=RGB24; " \
170 "setenv fbmen fbmem=28M; " \
171 "setexpr nextcon ${nextcon} + 1; " \
172 "else " \
173 "echo - no HDMI monitor;" \
174 "fi; " \
175 "i2c dev 1; " \
176 "if i2c probe 0x10; then " \
177 "setenv bootargs ${bootargs} " \
178 "video=mxcfb${nextcon}:dev=lcd,800x480@60," \
Otavio Salvador99c618f2015-01-15 13:32:29 -0200179 "if=RGB666,bpp=32; " \
Otavio Salvador0ef797a2014-05-01 19:02:32 -0300180 "if test 0 -eq ${nextcon}; then " \
181 "setenv fbmem fbmem=10M; " \
182 "else " \
183 "setenv fbmem ${fbmem},10M; " \
184 "fi; " \
185 "setexpr nextcon ${nextcon} + 1; " \
186 "else " \
187 "echo '- no FWBADAPT-7WVGA-LCD-F07A-0102 display';" \
188 "fi; " \
189 "setenv bootargs ${bootargs} ${fbmem}\0" \
Fabio Estevame2d282a2013-03-15 10:43:48 +0000190 "loadbootscript=" \
191 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
192 "bootscript=echo Running bootscript from mmc ...; " \
193 "source\0" \
John Weberf3533972014-01-06 13:27:22 -0200194 "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
Fabio Estevame2d282a2013-03-15 10:43:48 +0000195 "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
196 "mmcboot=echo Booting from mmc ...; " \
197 "run mmcargs; " \
198 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
199 "if run loadfdt; then " \
John Weberf3533972014-01-06 13:27:22 -0200200 "bootz ${loadaddr} - ${fdt_addr}; " \
Fabio Estevame2d282a2013-03-15 10:43:48 +0000201 "else " \
202 "if test ${boot_fdt} = try; then " \
John Weberf3533972014-01-06 13:27:22 -0200203 "bootz; " \
Fabio Estevame2d282a2013-03-15 10:43:48 +0000204 "else " \
205 "echo WARN: Cannot load the DT; " \
206 "fi; " \
207 "fi; " \
208 "else " \
John Weberf3533972014-01-06 13:27:22 -0200209 "bootz; " \
Fabio Estevame2d282a2013-03-15 10:43:48 +0000210 "fi;\0" \
211 "netargs=setenv bootargs console=${console},${baudrate} " \
212 "root=/dev/nfs " \
213 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
214 "netboot=echo Booting from net ...; " \
215 "run netargs; " \
216 "if test ${ip_dyn} = yes; then " \
217 "setenv get_cmd dhcp; " \
218 "else " \
219 "setenv get_cmd tftp; " \
220 "fi; " \
John Weberf3533972014-01-06 13:27:22 -0200221 "${get_cmd} ${image}; " \
Fabio Estevame2d282a2013-03-15 10:43:48 +0000222 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
223 "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
John Weberf3533972014-01-06 13:27:22 -0200224 "bootz ${loadaddr} - ${fdt_addr}; " \
Fabio Estevame2d282a2013-03-15 10:43:48 +0000225 "else " \
226 "if test ${boot_fdt} = try; then " \
John Weberf3533972014-01-06 13:27:22 -0200227 "bootz; " \
Fabio Estevame2d282a2013-03-15 10:43:48 +0000228 "else " \
229 "echo WARN: Cannot load the DT; " \
230 "fi; " \
231 "fi; " \
232 "else " \
John Weberf3533972014-01-06 13:27:22 -0200233 "bootz; " \
Fabio Estevame2d282a2013-03-15 10:43:48 +0000234 "fi;\0"
235
236#define CONFIG_BOOTCOMMAND \
Fabio Estevame2d282a2013-03-15 10:43:48 +0000237 "mmc dev ${mmcdev}; if mmc rescan; then " \
238 "if run loadbootscript; then " \
239 "run bootscript; " \
240 "else " \
John Weberf3533972014-01-06 13:27:22 -0200241 "if run loadimage; then " \
Fabio Estevame2d282a2013-03-15 10:43:48 +0000242 "run mmcboot; " \
243 "else run netboot; " \
244 "fi; " \
245 "fi; " \
246 "else run netboot; fi"
247
248/* Miscellaneous configurable options */
249#define CONFIG_SYS_LONGHELP
250#define CONFIG_SYS_HUSH_PARSER
Fabio Estevame2d282a2013-03-15 10:43:48 +0000251#define CONFIG_AUTO_COMPLETE
252#define CONFIG_SYS_CBSIZE 256
Fabio Estevame2d282a2013-03-15 10:43:48 +0000253#define CONFIG_SYS_MAXARGS 16
254#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
255
256#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
Fabio Estevame2d282a2013-03-15 10:43:48 +0000257
258#define CONFIG_CMDLINE_EDITING
259
260/* Physical Memory Map */
261#define CONFIG_NR_DRAM_BANKS 1
262#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
263
264#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
265#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
266#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
267
268#define CONFIG_SYS_INIT_SP_OFFSET \
269 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
270#define CONFIG_SYS_INIT_SP_ADDR \
271 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
272
273/* FLASH and environment organization */
274#define CONFIG_SYS_NO_FLASH
275
276#define CONFIG_ENV_SIZE (8 * 1024)
277
278#define CONFIG_ENV_IS_IN_MMC
279#define CONFIG_ENV_OFFSET (6 * 64 * 1024)
280#define CONFIG_SYS_MMC_ENV_DEV 0
Fabio Estevame2d282a2013-03-15 10:43:48 +0000281
282#define CONFIG_OF_LIBFDT
283#define CONFIG_CMD_BOOTZ
284
285#ifndef CONFIG_SYS_DCACHE_OFF
286#define CONFIG_CMD_CACHE
287#endif
288
289#endif /* __CONFIG_H * */