include/configs/vision2.h

/*
 * Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de>
 *
 * (C) Copyright 2009 Freescale Semiconductor, Inc.
 *
 * Configuration settings for the MX51-3Stack Freescale board.
 *
 * SPDX-License-Identifier:	GPL-2.0+ 
 */

#ifndef __CONFIG_H
#define __CONFIG_H


#define CONFIG_MX51	/* in a mx51 */
#define CONFIG_SYS_TEXT_BASE	0x97800000

#include <asm/arch/imx-regs.h>

#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO

#define CONFIG_CMDLINE_TAG	/* enable passing of ATAGs */
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG
#define CONFIG_BOARD_LATE_INIT

#ifndef MACH_TYPE_TTC_VISION2
#define MACH_TYPE_TTC_VISION2	2775
#endif
#define CONFIG_MACH_TYPE	MACH_TYPE_TTC_VISION2

/*
 * Size of malloc() pool
 */
#define CONFIG_SYS_MALLOC_LEN		(10 * 1024 * 1024)

/*
 * Hardware drivers
 */
#define CONFIG_MXC_UART
#define CONFIG_MXC_UART_BASE	UART3_BASE
#define CONFIG_MXC_GPIO
#define CONFIG_MXC_SPI
#define CONFIG_HW_WATCHDOG

 /*
 * SPI Configs
 * */
#define CONFIG_FSL_SF
#define CONFIG_CMD_SF

#define CONFIG_SPI_FLASH
#define CONFIG_SPI_FLASH_STMICRO

/*
 * Use gpio 4 pin 25 as chip select for SPI flash
 * This corresponds to gpio 121
 */
#define CONFIG_SF_DEFAULT_CS	(1 | (121 << 8))
#define CONFIG_SF_DEFAULT_MODE   SPI_MODE_0
#define CONFIG_SF_DEFAULT_SPEED  25000000

#define CONFIG_ENV_SPI_CS	(1 | (121 << 8))
#define CONFIG_ENV_SPI_BUS      0
#define CONFIG_ENV_SPI_MAX_HZ	25000000
#define CONFIG_ENV_SPI_MODE	SPI_MODE_0

#define CONFIG_ENV_OFFSET       (6 * 64 * 1024)
#define CONFIG_ENV_SECT_SIZE    (1 * 64 * 1024)
#define CONFIG_ENV_SIZE		(4 * 1024)

#define CONFIG_FSL_ENV_IN_SF
#define CONFIG_ENV_IS_IN_SPI_FLASH

/* PMIC Controller */
#define CONFIG_POWER
#define CONFIG_POWER_SPI
#define CONFIG_POWER_FSL
#define CONFIG_FSL_PMIC_BUS	0
#define CONFIG_FSL_PMIC_CS	0
#define CONFIG_FSL_PMIC_CLK	2500000
#define CONFIG_FSL_PMIC_MODE	SPI_MODE_0
#define CONFIG_FSL_PMIC_BITLEN	32
#define CONFIG_RTC_MC13XXX

/*
 * MMC Configs
 */
#define CONFIG_FSL_ESDHC
#ifdef CONFIG_FSL_ESDHC
#define CONFIG_SYS_FSL_ESDHC_ADDR	(0x70004000)
#define CONFIG_SYS_FSL_ESDHC_NUM	1

#define CONFIG_MMC

#define CONFIG_CMD_MMC
#define CONFIG_GENERIC_MMC
#define CONFIG_CMD_FAT
#define CONFIG_DOS_PARTITION
#endif

#define CONFIG_CMD_DATE

/*
 * Eth Configs
 */
#define CONFIG_HAS_ETH1
#define CONFIG_MII

#define CONFIG_FEC_MXC
#define IMX_FEC_BASE				FEC_BASE_ADDR
#define CONFIG_FEC_MXC_PHYADDR		0x1F

#define CONFIG_CMD_PING
#define CONFIG_CMD_MII
#define CONFIG_CMD_NET

/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_CONS_INDEX			3
#define CONFIG_BAUDRATE				115200

/***********************************************************
 * Command definition
 ***********************************************************/

#include <config_cmd_default.h>

#define CONFIG_CMD_SPI
#undef CONFIG_CMD_IMLS

#define CONFIG_BOOTDELAY        3

#define CONFIG_LOADADDR	0x90800000	/* loadaddr env var */

#define	CONFIG_EXTRA_ENV_SETTINGS	\
		"netdev=eth0\0"		\
		"loadaddr=0x90800000\0"

/*
 * Miscellaneous configurable options
 */
#define CONFIG_SYS_LONGHELP
#define	CONFIG_SYS_PROMPT		"Vision II U-boot > "
#define CONFIG_AUTO_COMPLETE
#define CONFIG_SYS_CBSIZE		512	/* Console I/O Buffer Size */

/* Print Buffer Size */
#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
					sizeof(CONFIG_SYS_PROMPT) + 16)
#define CONFIG_SYS_MAXARGS		64	/* max number of command args */
#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE

#define CONFIG_SYS_MEMTEST_START	0x90000000
#define CONFIG_SYS_MEMTEST_END		0x10000

#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR

#define CONFIG_SYS_HZ			1000
#define CONFIG_CMDLINE_EDITING
#define CONFIG_SYS_HUSH_PARSER

/*
 * Physical Memory Map
 */
#define CONFIG_NR_DRAM_BANKS		2
#define PHYS_SDRAM_1			CSD0_BASE_ADDR
#define PHYS_SDRAM_1_SIZE		(256 * 1024 * 1024)
#define PHYS_SDRAM_2			CSD1_BASE_ADDR
#define PHYS_SDRAM_2_SIZE		(256 * 1024 * 1024)
#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
#define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE

#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

#define CONFIG_BOARD_EARLY_INIT_F

/* 166 MHz DDR RAM */
#define CONFIG_SYS_DDR_CLKSEL		0
#define CONFIG_SYS_CLKTL_CBCDR		0x19239100
#define CONFIG_SYS_MAIN_PWR_ON

#define CONFIG_SYS_NO_FLASH

/*
 * Framebuffer and LCD
 */
#define CONFIG_PREBOOT
#define CONFIG_VIDEO
#define CONFIG_VIDEO_IPUV3
#define CONFIG_CFB_CONSOLE
#define CONFIG_VGA_AS_SINGLE_DEVICE
#define CONFIG_SYS_CONSOLE_IS_IN_ENV
#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
#define CONFIG_VIDEO_BMP_RLE8
#define CONFIG_SPLASH_SCREEN
#define CONFIG_CMD_BMP
#define CONFIG_BMP_16BPP
#define CONFIG_IPUV3_CLK	133000000

#endif				/* __CONFIG_H */