blob: e77b0072923e6c7f7a9a32bee02e794e37938862 [file] [log] [blame]
Joe Hershbergerbd328eb2015-05-12 14:46:24 -05001CONFIG_ARM=y
2CONFIG_ARCH_SUNXI=y
Tom Rini2bba7802021-06-28 10:17:29 -04003CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31s-primo81"
Tom Rinic9542ea2018-04-07 20:27:54 -04004CONFIG_SPL=y
Joe Hershbergerbd328eb2015-05-12 14:46:24 -05005CONFIG_MACH_SUN6I=y
6CONFIG_DRAM_CLK=360
7CONFIG_DRAM_ZQ=122
Joe Hershbergerc9bb9422015-06-22 16:15:29 -05008CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE"
9CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT"
10CONFIG_AXP_GPIO=y
Siarhei Siamashkaaaa6ac52015-01-19 05:23:34 +020011CONFIG_VIDEO_LCD_MODE="x:768,y:1024,depth:18,pclk_khz:66000,le:56,ri:60,up:30,lo:36,hs:64,vs:50,sync:3,vmode:0"
Joe Hershbergerbd328eb2015-05-12 14:46:24 -050012CONFIG_VIDEO_LCD_BL_EN="PA25"
13CONFIG_VIDEO_LCD_BL_PWM="PH13"
Siarhei Siamashkaaaa6ac52015-01-19 05:23:34 +020014CONFIG_VIDEO_LCD_PANEL_MIPI_4_LANE_513_MBPS_VIA_SSD2828=y
Tom Rinif7d0ae92020-07-28 08:46:52 -040015# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
Hans de Goede40117522015-09-30 15:22:42 +020016CONFIG_AXP_DLDO1_VOLT=3300
Hans de Goede860fbdd2016-08-18 20:51:12 +020017# CONFIG_REQUIRE_SERIAL_CONSOLE is not set
Bin Meng80df6912015-09-28 05:14:15 -070018CONFIG_USB_MUSB_HOST=y
Siarhei Siamashkaaaa6ac52015-01-19 05:23:34 +020019CONFIG_VIDEO_LCD_SSD2828_TX_CLK=27
20CONFIG_VIDEO_LCD_SSD2828_RESET="PA26"
21CONFIG_VIDEO_LCD_SPI_CS="PH9"
22CONFIG_VIDEO_LCD_SPI_SCLK="PH10"
23CONFIG_VIDEO_LCD_SPI_MOSI="PH11"
24CONFIG_VIDEO_LCD_SPI_MISO="PH12"