blob: c22e21567530d196effa004d4ea328b3854fcf88 [file] [log] [blame]
Ying Zhangc9e1f582014-01-24 15:50:09 +08001/* Copyright 2013 Freescale Semiconductor, Inc.
2 *
3 * SPDX-License-Identifier: GPL-2.0+
4 */
5
6#include <common.h>
Simon Glass24b852a2015-11-08 23:47:45 -07007#include <console.h>
Ying Zhangc9e1f582014-01-24 15:50:09 +08008#include <ns16550.h>
9#include <malloc.h>
10#include <mmc.h>
11#include <nand.h>
12#include <i2c.h>
13#include <fsl_esdhc.h>
14#include <spi_flash.h>
Simon Glassea022a32016-09-24 18:20:10 -060015#include "../common/spl.h"
Ying Zhangc9e1f582014-01-24 15:50:09 +080016
17DECLARE_GLOBAL_DATA_PTR;
18
Tom Rinia7e8c152014-02-25 12:44:13 -050019phys_size_t get_effective_memsize(void)
Ying Zhangc9e1f582014-01-24 15:50:09 +080020{
21 return CONFIG_SYS_L2_SIZE;
22}
23
24void board_init_f(ulong bootflag)
25{
26 u32 plat_ratio;
27 ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
Jaiprakash Singh39b0bbb2015-03-20 19:28:27 -070028 struct fsl_ifc ifc = {(void *)CONFIG_SYS_IFC_ADDR, (void *)NULL};
Ying Zhangc9e1f582014-01-24 15:50:09 +080029
30 console_init_f();
31
32 /* Clock configuration to access CPLD using IFC(GPCM) */
Jaiprakash Singh39b0bbb2015-03-20 19:28:27 -070033 setbits_be32(&ifc.gregs->ifc_gcr, 1 << IFC_GCR_TBCTL_TRN_TIME_SHIFT);
Ying Zhangc9e1f582014-01-24 15:50:09 +080034
York Sun76016862016-11-16 13:30:06 -080035#ifdef CONFIG_TARGET_P1010RDB_PB
Ying Zhangc9e1f582014-01-24 15:50:09 +080036 setbits_be32(&gur->pmuxcr2, MPC85xx_PMUXCR2_GPIO01_DRVVBUS);
37#endif
38
39 /* initialize selected port with appropriate baud rate */
40 plat_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_PLAT_RATIO;
41 plat_ratio >>= 1;
42 gd->bus_clk = CONFIG_SYS_CLK_FREQ * plat_ratio;
43
44 NS16550_init((NS16550_t)CONFIG_SYS_NS16550_COM1,
45 gd->bus_clk / 16 / CONFIG_BAUDRATE);
46
47#ifdef CONFIG_SPL_MMC_BOOT
48 puts("\nSD boot...\n");
49#elif defined(CONFIG_SPL_SPI_BOOT)
50 puts("\nSPI Flash boot...\n");
51#endif
52 /* copy code to RAM and jump to it - this should not return */
53 /* NOTE - code has to be copied out of NAND buffer before
54 * other blocks can be read.
55 */
56 relocate_code(CONFIG_SPL_RELOC_STACK, 0, CONFIG_SPL_RELOC_TEXT_BASE);
57}
58
59void board_init_r(gd_t *gd, ulong dest_addr)
60{
61 /* Pointer is writable since we allocated a register for it */
62 gd = (gd_t *)CONFIG_SPL_GD_ADDR;
63 bd_t *bd;
64
65 memset(gd, 0, sizeof(gd_t));
66 bd = (bd_t *)(CONFIG_SPL_GD_ADDR + sizeof(gd_t));
67 memset(bd, 0, sizeof(bd_t));
68 gd->bd = bd;
69 bd->bi_memstart = CONFIG_SYS_INIT_L2_ADDR;
70 bd->bi_memsize = CONFIG_SYS_L2_SIZE;
71
72 probecpu();
73 get_clocks();
74 mem_malloc_init(CONFIG_SPL_RELOC_MALLOC_ADDR,
75 CONFIG_SPL_RELOC_MALLOC_SIZE);
Sumit Garged4708a2016-05-25 12:41:48 -040076 gd->flags |= GD_FLG_FULL_MALLOC_INIT;
Ying Zhangc9e1f582014-01-24 15:50:09 +080077
78#ifndef CONFIG_SPL_NAND_BOOT
79 env_init();
80#endif
81#ifdef CONFIG_SPL_MMC_BOOT
82 mmc_initialize(bd);
83#endif
84
85 /* relocate environment function pointers etc. */
86#ifdef CONFIG_SPL_NAND_BOOT
87 nand_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,
88 (uchar *)CONFIG_ENV_ADDR);
89 gd->env_addr = (ulong)(CONFIG_ENV_ADDR);
90 gd->env_valid = 1;
91#else
92 env_relocate();
93#endif
94
95 i2c_init_all();
96
97 gd->ram_size = initdram(0);
98#ifdef CONFIG_SPL_NAND_BOOT
99 puts("\nTertiary program loader running in sram...");
100#else
101 puts("\nSecond program loader running in sram...");
102#endif
103
104#ifdef CONFIG_SPL_MMC_BOOT
105 mmc_boot();
106#elif defined(CONFIG_SPL_SPI_BOOT)
Simon Glassea022a32016-09-24 18:20:10 -0600107 fsl_spi_boot();
Ying Zhangc9e1f582014-01-24 15:50:09 +0800108#elif defined(CONFIG_SPL_NAND_BOOT)
109 nand_boot();
110#endif
111}