Gitiles
Code Review Sign In
gerrit.devboardsforandroid.linaro.org / platform / external / u-boot / 46d61a2f2aeefcd622c9678716429e68a3a98811 / . / post / cpu / mpc83xx / ecc.c
blob: 03b6d65fe9b7ed1514955585c1812091b8204940 [file] [log] [blame]
Tom Rini83d290c2018-05-06 17:58:06 -0400[diff] [blame]1// SPDX-License-Identifier: GPL-2.0+
Michael Zaidman93c7e702010-04-07 18:30:08 +0300[diff] [blame]2/*
3 * (C) Copyright 2010
4 * Eastman Kodak Company, <www.kodak.com>
5 * Michael Zaidman, <michael.zaidman@kodak.com>
6 *
7 * The code is based on the cpu/mpc83xx/ecc.c written by
8 * Dave Liu <daveliu@freescale.com>
Michael Zaidman93c7e702010-04-07 18:30:08 +0300[diff] [blame]9 */
10
11#include <common.h>
12#include <mpc83xx.h>
13#include <watchdog.h>
14#include <asm/io.h>
15#include <post.h>
16
17#if CONFIG_POST & CONFIG_SYS_POST_ECC
18/*
19 * We use the RAW I/O accessors where possible in order to
20 * achieve performance goal, since the test's execution time
21 * affects the board start up time.
22 */
23static inline void ecc_clear(ddr83xx_t *ddr)
24{
25 /* Clear capture registers */
26 __raw_writel(0, &ddr->capture_address);
27 __raw_writel(0, &ddr->capture_data_hi);
28 __raw_writel(0, &ddr->capture_data_lo);
29 __raw_writel(0, &ddr->capture_ecc);
30 __raw_writel(0, &ddr->capture_attributes);
31
32 /* Clear SBEC and set SBET to 1 */
33 out_be32(&ddr->err_sbe, 1 << ECC_ERROR_MAN_SBET_SHIFT);
34
35 /* Clear Error Detect register */
36 out_be32(&ddr->err_detect, ECC_ERROR_DETECT_MME |\
37 ECC_ERROR_DETECT_MBE |\
38 ECC_ERROR_DETECT_SBE |\
39 ECC_ERROR_DETECT_MSE);
40
41 isync();
42}
43
44int ecc_post_test(int flags)
45{
46 int ret = 0;
47 int int_state;
48 int errbit;
49 u32 pattern[2], writeback[2], retval[2];
50 ddr83xx_t *ddr = &((immap_t *)CONFIG_SYS_IMMR)->ddr;
51 volatile u64 *addr = (u64 *)CONFIG_SYS_POST_ECC_START_ADDR;
52
53 /* The pattern is written into memory to generate error */
54 pattern[0] = 0xfedcba98UL;
55 pattern[1] = 0x76543210UL;
56
57 /* After injecting error, re-initialize the memory with the value */
58 writeback[0] = ~pattern[0];
59 writeback[1] = ~pattern[1];
60
61 /* Check if ECC is enabled */
62 if (__raw_readl(&ddr->err_disable) & ECC_ERROR_ENABLE) {
63 debug("DDR's ECC is not enabled, skipping the ECC POST.\n");
64 return 0;
65 }
66
67 int_state = disable_interrupts();
68 icache_enable();
69
70#ifdef CONFIG_DDR_32BIT
71 /* It seems like no one really uses the CONFIG_DDR_32BIT mode */
72#error "Add ECC POST support for CONFIG_DDR_32BIT here!"
73#else
74 for (addr = (u64*)CONFIG_SYS_POST_ECC_START_ADDR, errbit=0;
75 addr < (u64*)CONFIG_SYS_POST_ECC_STOP_ADDR; addr++, errbit++ ) {
76
77 WATCHDOG_RESET();
78
79 ecc_clear(ddr);
80
81 /* Enable error injection */
82 setbits_be32(&ddr->ecc_err_inject, ECC_ERR_INJECT_EIEN);
83 sync();
84 isync();
85
86 /* Set bit to be injected */
87 if (errbit < 32) {
88 __raw_writel(1 << errbit, &ddr->data_err_inject_lo);
89 __raw_writel(0, &ddr->data_err_inject_hi);
90 } else {
91 __raw_writel(0, &ddr->data_err_inject_lo);
92 __raw_writel(1<<(errbit-32), &ddr->data_err_inject_hi);
93 }
94 sync();
95 isync();
96
97 /* Write memory location injecting SBE */
98 ppcDWstore((u32*)addr, pattern);
99 sync();
100
101 /* Disable error injection */
102 clrbits_be32(&ddr->ecc_err_inject, ECC_ERR_INJECT_EIEN);
103 sync();
104 isync();
105
106 /* Data read should generate SBE */
107 ppcDWload((u32*)addr, retval);
108 sync();
109
110 if (!(__raw_readl(&ddr->err_detect) & ECC_ERROR_DETECT_SBE) ||
111 (__raw_readl(&ddr->data_err_inject_hi) !=
112 (__raw_readl(&ddr->capture_data_hi) ^ pattern[0])) ||
113 (__raw_readl(&ddr->data_err_inject_lo) !=
114 (__raw_readl(&ddr->capture_data_lo) ^ pattern[1]))) {
115
116 post_log("ECC failed to detect SBE error at %08x, "
117 "SBE injection mask %08x-%08x, wrote "
118 "%08x-%08x, read %08x-%08x\n", addr,
119 ddr->data_err_inject_hi,
120 ddr->data_err_inject_lo,
121 pattern[0], pattern[1],
122 retval[0], retval[1]);
123
124 printf("ERR_DETECT Reg: %08x\n", ddr->err_detect);
125 printf("ECC CAPTURE_DATA Reg: %08x-%08x\n",
126 ddr->capture_data_hi, ddr->capture_data_lo);
127 ret = 1;
128 break;
129 }
130
131 /* Re-initialize the ECC memory */
132 ppcDWstore((u32*)addr, writeback);
133 sync();
134 isync();
135
136 errbit %= 63;
137 }
138#endif /* !CONFIG_DDR_32BIT */
139
140 ecc_clear(ddr);
141
142 icache_disable();
143
144 if (int_state)
145 enable_interrupts();
146
147 return ret;
148}
149#endif