blob: 8978f6bd63e59eed24243695c170f814299ba24d [file] [log] [blame]
Tom Rini53633a82024-02-29 12:33:36 -05001# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/sound/st,stm32-i2s.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: STMicroelectronics STM32 SPI/I2S Controller
8
9maintainers:
10 - Olivier Moysan <olivier.moysan@foss.st.com>
11
12description:
13 The SPI/I2S block supports I2S/PCM protocols when configured on I2S mode.
14 Only some SPI instances support I2S.
15
16allOf:
17 - $ref: dai-common.yaml#
18
19properties:
20 compatible:
21 enum:
22 - st,stm32h7-i2s
23
24 "#sound-dai-cells":
25 const: 0
26
27 reg:
28 maxItems: 1
29
30 clocks:
31 items:
32 - description: clock feeding the peripheral bus interface.
33 - description: clock feeding the internal clock generator.
34 - description: I2S parent clock for sampling rates multiple of 8kHz.
35 - description: I2S parent clock for sampling rates multiple of 11.025kHz.
36
37 clock-names:
38 items:
39 - const: pclk
40 - const: i2sclk
41 - const: x8k
42 - const: x11k
43
44 interrupts:
45 maxItems: 1
46
47 dmas:
48 items:
49 - description: audio capture DMA.
50 - description: audio playback DMA.
51
52 dma-names:
53 items:
54 - const: rx
55 - const: tx
56
57 resets:
58 maxItems: 1
59
60 "#clock-cells":
61 description: Configure the I2S device as MCLK clock provider.
62 const: 0
63
64 port:
65 $ref: audio-graph-port.yaml#
66 unevaluatedProperties: false
67
Tom Rini762f85b2024-07-20 11:15:10 -060068 access-controllers:
69 minItems: 1
70 maxItems: 2
71
Tom Rini53633a82024-02-29 12:33:36 -050072required:
73 - compatible
74 - "#sound-dai-cells"
75 - reg
76 - clocks
77 - clock-names
78 - interrupts
79 - dmas
80 - dma-names
81
82unevaluatedProperties: false
83
84examples:
85 - |
86 #include <dt-bindings/interrupt-controller/arm-gic.h>
87 #include <dt-bindings/clock/stm32mp1-clks.h>
88 i2s2: audio-controller@4000b000 {
89 compatible = "st,stm32h7-i2s";
90 #sound-dai-cells = <0>;
91 reg = <0x4000b000 0x400>;
92 clocks = <&rcc SPI2>, <&rcc SPI2_K>, <&rcc PLL3_Q>, <&rcc PLL3_R>;
93 clock-names = "pclk", "i2sclk", "x8k", "x11k";
94 interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
95 dmas = <&dmamux1 39 0x400 0x01>,
96 <&dmamux1 40 0x400 0x01>;
97 dma-names = "rx", "tx";
98 pinctrl-names = "default";
99 pinctrl-0 = <&i2s2_pins_a>;
100
101 /* assume audio-graph */
102 port {
103 codec_endpoint: endpoint {
104 remote-endpoint = <&codec_endpoint>;
105 };
106 };
107 };
108
109...