| Tony Dinh | b3f559a | 2023-08-25 20:33:29 -0700 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0 |
| 2 | #include "kirkwood.dtsi" |
| 3 | #include "kirkwood-6281.dtsi" |
| 4 | |
| 5 | / { |
| 6 | model = "ZyXEL NSA310"; |
| 7 | |
| 8 | ocp@f1000000 { |
| 9 | pinctrl: pin-controller@10000 { |
| 10 | |
| 11 | pmx_usb_power: pmx-usb-power { |
| 12 | marvell,pins = "mpp21"; |
| 13 | marvell,function = "gpio"; |
| 14 | }; |
| 15 | |
| 16 | pmx_pwr_off: pmx-pwr-off { |
| 17 | marvell,pins = "mpp48"; |
| 18 | marvell,function = "gpio"; |
| 19 | }; |
| 20 | |
| 21 | pmx_btn_reset: pmx-btn-reset { |
| 22 | marvell,pins = "mpp36"; |
| 23 | marvell,function = "gpio"; |
| 24 | }; |
| 25 | |
| 26 | pmx_btn_copy: pmx-btn-copy { |
| 27 | marvell,pins = "mpp37"; |
| 28 | marvell,function = "gpio"; |
| 29 | }; |
| 30 | |
| 31 | pmx_btn_power: pmx-btn-power { |
| 32 | marvell,pins = "mpp46"; |
| 33 | marvell,function = "gpio"; |
| 34 | }; |
| 35 | |
| 36 | pmx_led_copy_green: pmx-led-copy-green { |
| 37 | marvell,pins = "mpp39"; |
| 38 | marvell,function = "gpio"; |
| 39 | }; |
| 40 | |
| 41 | pmx_led_copy_red: pmx-led-copy-red { |
| 42 | marvell,pins = "mpp40"; |
| 43 | marvell,function = "gpio"; |
| 44 | }; |
| 45 | }; |
| 46 | |
| 47 | serial@12000 { |
| 48 | status = "okay"; |
| 49 | }; |
| 50 | |
| 51 | sata@80000 { |
| 52 | status = "okay"; |
| 53 | nr-ports = <2>; |
| 54 | }; |
| 55 | }; |
| 56 | |
| 57 | gpio_poweroff { |
| 58 | compatible = "gpio-poweroff"; |
| 59 | pinctrl-0 = <&pmx_pwr_off>; |
| 60 | pinctrl-names = "default"; |
| 61 | gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>; |
| 62 | }; |
| 63 | |
| 64 | gpio_keys { |
| 65 | compatible = "gpio-keys"; |
| 66 | #address-cells = <1>; |
| 67 | #size-cells = <0>; |
| 68 | pinctrl-0 = <&pmx_btn_reset &pmx_btn_copy &pmx_btn_power>; |
| 69 | pinctrl-names = "default"; |
| 70 | |
| 71 | power { |
| 72 | label = "Power Button"; |
| 73 | linux,code = <KEY_POWER>; |
| 74 | gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>; |
| 75 | }; |
| 76 | copy { |
| 77 | label = "Copy Button"; |
| 78 | linux,code = <KEY_COPY>; |
| 79 | gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; |
| 80 | }; |
| 81 | reset { |
| 82 | label = "Reset Button"; |
| 83 | linux,code = <KEY_RESTART>; |
| 84 | gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; |
| 85 | }; |
| 86 | }; |
| 87 | |
| 88 | |
| 89 | regulators { |
| 90 | compatible = "simple-bus"; |
| 91 | #address-cells = <1>; |
| 92 | #size-cells = <0>; |
| 93 | pinctrl-0 = <&pmx_usb_power>; |
| 94 | pinctrl-names = "default"; |
| 95 | |
| 96 | usb0_power: regulator@1 { |
| 97 | compatible = "regulator-fixed"; |
| 98 | reg = <1>; |
| 99 | regulator-name = "USB Power"; |
| 100 | regulator-min-microvolt = <5000000>; |
| 101 | regulator-max-microvolt = <5000000>; |
| 102 | regulator-always-on; |
| 103 | regulator-boot-on; |
| 104 | gpio = <&gpio0 21 GPIO_ACTIVE_HIGH>; |
| 105 | }; |
| 106 | }; |
| 107 | }; |
| 108 | |
| 109 | &nand { |
| 110 | status = "okay"; |
| 111 | chip-delay = <35>; |
| 112 | |
| 113 | partition@0 { |
| 114 | label = "uboot"; |
| 115 | reg = <0x0000000 0x0100000>; |
| 116 | }; |
| 117 | partition@100000 { |
| 118 | label = "uboot_env"; |
| 119 | reg = <0x0100000 0x0080000>; |
| 120 | }; |
| 121 | partition@180000 { |
| 122 | label = "key_store"; |
| 123 | reg = <0x0180000 0x0080000>; |
| 124 | }; |
| 125 | partition@200000 { |
| 126 | label = "info"; |
| 127 | reg = <0x0200000 0x0080000>; |
| 128 | }; |
| 129 | partition@280000 { |
| 130 | label = "etc"; |
| 131 | reg = <0x0280000 0x0a00000>; |
| 132 | }; |
| 133 | partition@c80000 { |
| 134 | label = "kernel_1"; |
| 135 | reg = <0x0c80000 0x0a00000>; |
| 136 | }; |
| 137 | partition@1680000 { |
| 138 | label = "rootfs1"; |
| 139 | reg = <0x1680000 0x2fc0000>; |
| 140 | }; |
| 141 | partition@4640000 { |
| 142 | label = "kernel_2"; |
| 143 | reg = <0x4640000 0x0a00000>; |
| 144 | }; |
| 145 | partition@5040000 { |
| 146 | label = "rootfs2"; |
| 147 | reg = <0x5040000 0x2fc0000>; |
| 148 | }; |
| 149 | }; |
| 150 | |
| 151 | &pciec { |
| 152 | status = "okay"; |
| 153 | }; |
| 154 | |
| 155 | &pcie0 { |
| 156 | status = "okay"; |
| 157 | }; |