Gitiles
Code Review Sign In
gerrit.devboardsforandroid.linaro.org / platform / external / u-boot / 4a463a190f0847edfd1c2880203330ebaf854e2f / . / arch / arm / dts / sun7i-a20-icnova-a20-adb4006.dts
blob: 577ead1d02a0f412f0e16d37b4f1198e7d5d613c [file] [log] [blame]
Andre Przywara1fe28c02023-10-19 15:45:32 +0100[diff] [blame]1// SPDX-License-Identifier: (GPL-2.0 OR MIT)
2// Copyright (C) 2023 In-Circuit GmbH
3
4/dts-v1/;
5
6#include "sun7i-a20-icnova-a20.dtsi"
7
8#include <dt-bindings/gpio/gpio.h>
9#include <dt-bindings/leds/common.h>
10
11/ {
12 model = "In-Circuit ICnova A20 ADB4006";
13 compatible = "incircuit,icnova-a20-adb4006", "incircuit,icnova-a20",
14 "allwinner,sun7i-a20";
15
16 aliases {
17 serial0 = &uart0;
18 };
19
20 chosen {
21 stdout-path = "serial0:115200n8";
22 };
23
24 hdmi-connector {
25 compatible = "hdmi-connector";
26 type = "a";
27
28 port {
29 hdmi_con_in: endpoint {
30 remote-endpoint = <&hdmi_out_con>;
31 };
32 };
33 };
34
35 leds {
36 compatible = "gpio-leds";
37
38 led-0 {
39 function = LED_FUNCTION_POWER;
40 color = <LED_COLOR_ID_YELLOW>;
41 gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>; /* PH21 */
42 default-state = "on";
43 };
44
45 led-1 {
46 function = LED_FUNCTION_HEARTBEAT;
47 color = <LED_COLOR_ID_RED>;
48 gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; /* PH20 */
49 linux,default-trigger = "heartbeat";
50 };
51 };
52};
53
54&ahci {
55 target-supply = <&reg_ahci_5v>;
56 status = "okay";
57};
58
59&codec {
60 status = "okay";
61};
62
63&de {
64 status = "okay";
65};
66
67&ehci0 {
68 status = "okay";
69};
70
71&ehci1 {
72 status = "okay";
73};
74
75&hdmi {
76 status = "okay";
77};
78
79&hdmi_out {
80 hdmi_out_con: endpoint {
81 remote-endpoint = <&hdmi_con_in>;
82 };
83};
84
85&mmc0 {
86 vmmc-supply = <&reg_vcc3v3>;
87 bus-width = <4>;
88 cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
89 status = "okay";
90};
91
92&ohci0 {
93 status = "okay";
94};
95
96&ohci1 {
97 status = "okay";
98};
99
100&otg_sram {
101 status = "okay";
102};
103
104&reg_ahci_5v {
105 status = "okay";
106};
107
108&ac_power_supply {
109 status = "okay";
110};
111
112&reg_usb1_vbus {
113 status = "okay";
114};
115
116&reg_usb2_vbus {
117 status = "okay";
118};
119
120&uart0 {
121 pinctrl-names = "default";
122 pinctrl-0 = <&uart0_pb_pins>;
123 status = "okay";
124};
125
126&usb_otg {
127 dr_mode = "otg";
128 status = "okay";
129};
130
131&usbphy {
132 usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
133 usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
134 usb1_vbus-supply = <&reg_usb1_vbus>;
135 usb2_vbus-supply = <&reg_usb2_vbus>;
136 status = "okay";
137};