Gitiles
Code Review Sign In
gerrit.devboardsforandroid.linaro.org / platform / external / u-boot / 4a693669670fffd9a614c8c5c9f5ba027fd0185e / . / drivers / gpio / Kconfig
blob: 5699a71b231f3c33d1bf1880c9cb4442b8d99360 [file] [log] [blame]
Masahiro Yamada0b11dbf2015-07-26 02:46:26 +0900[diff] [blame]1#
2# GPIO infrastructure and drivers
3#
4
5menu "GPIO Support"
6
Masahiro Yamadada333ae2014-10-23 22:26:09 +0900[diff] [blame]7config DM_GPIO
8 bool "Enable Driver Model for GPIO drivers"
9 depends on DM
10 help
Simon Glassf94a1be2015-02-05 21:41:35 -0700[diff] [blame]11 Enable driver model for GPIO access. The standard GPIO
12 interface (gpio_get_value(), etc.) is then implemented by
13 the GPIO uclass. Drivers provide methods to query the
14 particular GPIOs that they provide. The uclass interface
15 is defined in include/asm-generic/gpio.h.
Albert ARIBAUD \(3ADEV\)606f7042015-03-31 11:40:46 +0200[diff] [blame]16
Thomas Chou88d5ecf2015-10-21 21:33:45 +0800[diff] [blame]17config ALTERA_PIO
18 bool "Altera PIO driver"
19 depends on DM_GPIO
20 help
21 Select this to enable PIO for Altera devices. Please find
22 details on the "Embedded Peripherals IP User Guide" of Altera.
23
Álvaro Fernández Rojase64bdb22017-05-07 20:09:30 +0200[diff] [blame]24config BCM6345_GPIO
25 bool "BCM6345 GPIO driver"
26 depends on DM_GPIO && ARCH_BMIPS
27 help
28 This driver supports the GPIO banks on BCM6345 SoCs.
29
Marek Vasute30a70c2015-06-23 15:54:19 +0200[diff] [blame]30config DWAPB_GPIO
31 bool "DWAPB GPIO driver"
32 depends on DM && DM_GPIO
33 default n
34 help
35 Support for the Designware APB GPIO driver.
36
Wenyou Yang5a07a5f2017-03-23 12:46:19 +0800[diff] [blame]37config AT91_GPIO
38 bool "AT91 PIO GPIO driver"
39 depends on DM_GPIO
40 default n
41 help
42 Say yes here to select AT91 PIO GPIO driver. AT91 PIO
43 controller manages up to 32 fully programmable input/output
44 lines. Each I/O line may be dedicated as a general-purpose
45 I/O or be assigned to a function of an embedded peripheral.
46 The assignment to a function of an embedded peripheral is
47 the responsibility of AT91 Pinctrl driver. This driver is
48 responsible for the general-purpose I/O.
49
Wenyou Yang2c62c562015-11-04 14:25:13 +0800[diff] [blame]50config ATMEL_PIO4
51 bool "ATMEL PIO4 driver"
Wenyou Yangee3311d2016-07-20 17:16:26 +0800[diff] [blame]52 depends on DM_GPIO
Wenyou Yang2c62c562015-11-04 14:25:13 +0800[diff] [blame]53 default n
54 help
55 Say yes here to support the Atmel PIO4 driver.
56 The PIO4 is new version of Atmel PIO controller, which manages
57 up to 128 fully programmable input/output lines. Each I/O line
58 may be dedicated as a general purpose I/O or be assigned to
59 a function of an embedded peripheral.
60
Simon Glass64b17972016-03-11 22:07:27 -0700[diff] [blame]61config INTEL_BROADWELL_GPIO
62 bool "Intel Broadwell GPIO driver"
63 depends on DM
64 help
65 This driver supports Broadwell U devices which have an expanded
66 GPIO feature set. The difference is large enough to merit a separate
67 driver from the common Intel ICH6 driver. It supports a total of
68 95 GPIOs which can be configured from the device tree.
69
Bin Meng72436892017-07-30 06:23:28 -0700[diff] [blame]70config INTEL_ICH6_GPIO
71 bool "Intel ICH6 compatible legacy GPIO driver"
72 depends on DM_GPIO
73 help
74 Say yes here to select Intel ICH6 compatible legacy GPIO driver.
75
Peng Fand665eb62017-02-22 16:21:45 +0800[diff] [blame]76config IMX_RGPIO2P
77 bool "i.MX7ULP RGPIO2P driver"
78 depends on DM
79 default n
80 help
81 This driver supports i.MX7ULP Rapid GPIO2P controller.
82
Eugeniy Paltsev3194c3c2017-10-16 16:21:32 +0300[diff] [blame]83config HSDK_CREG_GPIO
84 bool "HSDK CREG GPIO griver"
Alexey Brodkind5fbcd52017-12-10 20:55:44 +0300[diff] [blame]85 depends on DM_GPIO
Eugeniy Paltsev3194c3c2017-10-16 16:21:32 +0300[diff] [blame]86 default n
87 help
88 This driver supports CREG GPIOs on Synopsys HSDK SOC.
89
Albert ARIBAUD \(3ADEV\)606f7042015-03-31 11:40:46 +0200[diff] [blame]90config LPC32XX_GPIO
91 bool "LPC32XX GPIO driver"
92 depends on DM
93 default n
94 help
95 Support for the LPC32XX GPIO driver.
Simon Glassd79c50a2015-03-06 13:19:01 -0700[diff] [blame]96
Mateusz Kulikowski81a87e12016-03-31 23:12:15 +0200[diff] [blame]97config MSM_GPIO
98 bool "Qualcomm GPIO driver"
99 depends on DM_GPIO
100 default n
101 help
102 Support GPIO controllers on Qualcomm Snapdragon family of SoCs.
103 This controller have single bank (default name "soc"), every
104 gpio has it's own set of registers.
105 Only simple GPIO operations are supported (get/set, change of
106 direction and checking pin function).
107 Supported devices:
108 - APQ8016
109 - MSM8916
110
Adam Ford8bbff6a2018-02-04 09:32:43 -0600[diff] [blame]111config MXC_GPIO
Hannes Schmelzer8fd05fc2018-06-07 12:10:09 +0200[diff] [blame]112 bool "Freescale/NXP MXC GPIO driver"
Adam Ford8bbff6a2018-02-04 09:32:43 -0600[diff] [blame]113 help
114 Support GPIO controllers on various i.MX platforms
115
Tom Rini29cb2b32017-05-12 22:33:21 -0400[diff] [blame]116config OMAP_GPIO
117 bool "TI OMAP GPIO driver"
118 depends on ARCH_OMAP2PLUS
119 default y
120 help
121 Support GPIO controllers on the TI OMAP3/4/5 and related (such as
122 AM335x/AM43xx/AM57xx/DRA7xx/etc) families of SoCs.
123
Simon Glass00913622017-08-04 16:34:32 -0600[diff] [blame]124config CMD_PCA953X
125 bool "Enable the pca953x command"
126 help
127 Deprecated: This should be converted to driver model.
128
129 This command provides access to a pca953x GPIO device using the
130 legacy GPIO interface. Several subcommands are provided which mirror
131 the standard 'gpio' command. It should use that instead.
132
Mateusz Kulikowski120800d2016-03-31 23:12:31 +0200[diff] [blame]133config PM8916_GPIO
134 bool "Qualcomm PM8916 PMIC GPIO/keypad driver"
135 depends on DM_GPIO && PMIC_PM8916
136 help
137 Support for GPIO pins and power/reset buttons found on
138 Qualcomm PM8916 PMIC.
139 Default name for GPIO bank is "pm8916".
140 Power and reset buttons are placed in "pm8916_key" bank and
141 have gpio numbers 0 and 1 respectively.
142
Vignesh R5746b0d2016-08-02 10:14:24 +0530[diff] [blame]143config PCF8575_GPIO
144 bool "PCF8575 I2C GPIO Expander driver"
145 depends on DM_GPIO && DM_I2C
146 help
147 Support for PCF8575 I2C 16-bit GPIO expander. Most of these
148 chips are from NXP and TI.
149
Marek Vasutf5f69592017-09-15 21:13:56 +0200[diff] [blame]150config RCAR_GPIO
151 bool "Renesas RCar GPIO driver"
152 depends on DM_GPIO && ARCH_RMOBILE
153 help
154 This driver supports the GPIO banks on Renesas RCar SoCs.
155
Simon Glass1f8f7732015-08-30 16:55:27 -0600[diff] [blame]156config ROCKCHIP_GPIO
157 bool "Rockchip GPIO driver"
158 depends on DM_GPIO
159 help
160 Support GPIO access on Rockchip SoCs. The GPIOs are arranged into
161 a number of banks (different for each SoC type) each with 32 GPIOs.
162 The GPIOs for a device are defined in the device tree with one node
163 for each bank.
164
Simon Glassd79c50a2015-03-06 13:19:01 -0700[diff] [blame]165config SANDBOX_GPIO
166 bool "Enable sandbox GPIO driver"
167 depends on SANDBOX && DM && DM_GPIO
168 help
169 This driver supports some simulated GPIOs which can be adjusted
170 using 'back door' functions like sandbox_gpio_set_value(). Then the
171 GPIOs can be inspected through the normal get_get_value()
172 interface. The purpose of this is to allow GPIOs to be used as
173 normal in sandbox, perhaps with test code actually driving the
174 behaviour of those GPIOs.
175
176config SANDBOX_GPIO_COUNT
177 int "Number of sandbox GPIOs"
178 depends on SANDBOX_GPIO
179 default 128
180 help
181 The sandbox driver can support any number of GPIOs. Generally these
182 are specified using the device tree. But you can also have a number
183 of 'anonymous' GPIOs that do not belong to any device or bank.
184 Select a suitable value depending on your needs.
Bhuvanchandra DVd348a942015-06-01 18:37:16 +0530[diff] [blame]185
Vipul Kumar71d5a142018-02-28 11:32:22 +0530[diff] [blame]186config XILINX_GPIO
187 bool "Xilinx GPIO driver"
Michal Simek4a693662018-07-13 08:26:28 +0200[diff] [blame^]188 depends on DM_GPIO
Vipul Kumar71d5a142018-02-28 11:32:22 +0530[diff] [blame]189 help
190 This config enable the Xilinx GPIO driver for Microblaze.
191
Simon Glass90d99e52017-08-04 16:34:54 -0600[diff] [blame]192config CMD_TCA642X
193 bool "tca642x - Command to access tca642x state"
194 help
195 DEPRECATED - This needs conversion to driver model
196
197 This provides a way to looking at the pin state of this device.
198 This mirrors the 'gpio' command and that should be used in preference
199 to custom code.
200
Stephen Warren601800b2016-05-12 12:07:41 -0600[diff] [blame]201config TEGRA_GPIO
202 bool "Tegra20..210 GPIO driver"
203 depends on DM_GPIO
204 help
205 Support for the GPIO controller contained in NVIDIA Tegra20 through
206 Tegra210.
207
Stephen Warren074a1fd2016-05-25 14:38:51 -0600[diff] [blame]208config TEGRA186_GPIO
209 bool "Tegra186 GPIO driver"
210 depends on DM_GPIO
211 help
212 Support for the GPIO controller contained in NVIDIA Tegra186. This
213 covers both the "main" and "AON" controller instances, even though
214 they have slightly different register layout.
215
Masahiro Yamadab9a66b62016-02-16 17:03:48 +0900[diff] [blame]216config GPIO_UNIPHIER
217 bool "UniPhier GPIO"
218 depends on ARCH_UNIPHIER
219 help
220 Say yes here to support UniPhier GPIOs.
221
Bhuvanchandra DVd348a942015-06-01 18:37:16 +0530[diff] [blame]222config VYBRID_GPIO
223 bool "Vybrid GPIO driver"
224 depends on DM
225 default n
226 help
227 Say yes here to support Vybrid vf610 GPIOs.
Masahiro Yamada0b11dbf2015-07-26 02:46:26 +0900[diff] [blame]228
Purna Chandra Mandal386d9342016-01-28 15:30:13 +0530[diff] [blame]229config PIC32_GPIO
230 bool "Microchip PIC32 GPIO driver"
231 depends on DM_GPIO && MACH_PIC32
232 default y
233 help
234 Say yes here to support Microchip PIC32 GPIOs.
235
Vikas Manocha77417102017-04-10 15:02:57 -0700[diff] [blame]236config STM32F7_GPIO
237 bool "ST STM32 GPIO driver"
Patrick Delaunay2514c2d2018-03-12 10:46:10 +0100[diff] [blame]238 depends on DM_GPIO && (STM32 || ARCH_STM32MP)
Vikas Manocha77417102017-04-10 15:02:57 -0700[diff] [blame]239 default y
240 help
241 Device model driver support for STM32 GPIO controller. It should be
242 usable on many stm32 families like stm32f4 & stm32H7.
243 Tested on STM32F7.
244
Stefan Roese704d9a62016-02-12 13:46:50 +0100[diff] [blame]245config MVEBU_GPIO
246 bool "Marvell MVEBU GPIO driver"
247 depends on DM_GPIO && ARCH_MVEBU
248 default y
249 help
250 Say yes here to support Marvell MVEBU (Armada XP/38x) GPIOs.
251
Siva Durga Prasad Paladugu2978ae22016-03-10 16:27:39 +0530[diff] [blame]252config ZYNQ_GPIO
253 bool "Zynq GPIO driver"
Siva Durga Prasad Paladugu251ab062016-03-10 16:27:44 +0530[diff] [blame]254 depends on DM_GPIO && (ARCH_ZYNQ || ARCH_ZYNQMP)
Siva Durga Prasad Paladugu2978ae22016-03-10 16:27:39 +0530[diff] [blame]255 default y
256 help
257 Supports GPIO access on Zynq SoC.
258
Peng Fan9300f712016-05-03 10:02:23 +0800[diff] [blame]259config DM_74X164
260 bool "74x164 serial-in/parallel-out 8-bits shift register"
261 depends on DM_GPIO
262 help
263 Driver for 74x164 compatible serial-in/parallel-out 8-outputs
264 shift registers, such as 74lv165, 74hc595.
265 This driver can be used to provide access to more gpio outputs.
266
Peng Fan03773432016-04-14 21:45:06 +0800[diff] [blame]267config DM_PCA953X
268 bool "PCA95[357]x, PCA9698, TCA64xx, and MAX7310 I/O ports"
269 depends on DM_GPIO
270 help
271 Say yes here to provide access to several register-oriented
272 SMBus I/O expanders, made mostly by NXP or TI. Compatible
273 models include:
274
275 4 bits: pca9536, pca9537
276
277 8 bits: max7310, max7315, pca6107, pca9534, pca9538, pca9554,
278 pca9556, pca9557, pca9574, tca6408, xra1202
279
280 16 bits: max7312, max7313, pca9535, pca9539, pca9555, pca9575,
281 tca6416
282
283 24 bits: tca6424
284
285 40 bits: pca9505, pca9698
286
287 Now, max 24 bits chips and PCA953X compatible chips are
288 supported
mario.six@gdsys.cc07d31f82016-05-25 15:15:20 +0200[diff] [blame]289
Mario Six3c216832018-01-15 11:07:48 +0100[diff] [blame]290config MPC8XXX_GPIO
291 bool "Freescale MPC8XXX GPIO driver"
mario.six@gdsys.cc07d31f82016-05-25 15:15:20 +0200[diff] [blame]292 depends on DM_GPIO
293 help
Mario Six3c216832018-01-15 11:07:48 +0100[diff] [blame]294 This driver supports the built-in GPIO controller of MPC8XXX CPUs.
mario.six@gdsys.cc07d31f82016-05-25 15:15:20 +0200[diff] [blame]295 Each GPIO bank is identified by its own entry in the device tree,
296 i.e.
297
298 gpio-controller@fc00 {
299 #gpio-cells = <2>;
300 compatible = "fsl,pq3-gpio";
301 reg = <0xfc00 0x100>
302 }
303
304 By default, each bank is assumed to have 32 GPIOs, but the ngpios
305 setting is honored, so the number of GPIOs for each bank is
306 configurable to match the actual GPIO count of the SoC (e.g. the
307 32/32/23 banks of the P1022 SoC).
308
mario.six@gdsys.cc51781782016-05-25 15:15:22 +0200[diff] [blame]309 Aside from the standard functions of input/output mode, and output
310 value setting, the open-drain feature, which can configure individual
311 GPIOs to work as open-drain outputs, is supported.
Masahiro Yamada0b11dbf2015-07-26 02:46:26 +0900[diff] [blame]312endmenu