blob: 6d46f7d8dd72710d4d53399b40de133e600122a4 [file] [log] [blame]
Hou Zhiqiangcaa75692019-08-20 09:35:29 +00001// SPDX-License-Identifier: GPL-2.0+ OR X11
2/*
3 * P2020 Silicon/SoC Device Tree Source (post include)
4 *
5 * Copyright 2013 Freescale Semiconductor Inc.
6 * Copyright 2019 NXP
7 */
8
9&soc {
10 #address-cells = <1>;
11 #size-cells = <1>;
12 device_type = "soc";
13 compatible = "fsl,p2020-immr", "simple-bus";
14 bus-frequency = <0x0>;
15
Ran Wangb614af92019-12-12 17:30:55 +080016 usb@22000 {
17 compatible = "fsl-usb2-dr";
18 reg = <0x22000 0x1000>;
19 phy_type = "ulpi";
20 };
21
Hou Zhiqiangcaa75692019-08-20 09:35:29 +000022 mpic: pic@40000 {
23 interrupt-controller;
24 #address-cells = <0>;
25 #interrupt-cells = <4>;
26 reg = <0x40000 0x40000>;
27 compatible = "fsl,mpic";
28 device_type = "open-pic";
29 big-endian;
30 single-cpu-affinity;
31 last-interrupt-source = <255>;
32 };
Yinbo Zhue1263632019-10-15 17:20:41 +080033
34 esdhc: esdhc@2e000 {
35 compatible = "fsl,esdhc";
36 reg = <0x2e000 0x1000>;
37 /* Filled in by U-Boot */
38 clock-frequency = <0>;
39 };
Biwen Li2563aea2020-05-01 20:04:03 +080040
Xiaowei Baoc7303292020-06-04 23:16:37 +080041 espi0: spi@7000 {
42 compatible = "fsl,mpc8536-espi";
43 #address-cells = <1>;
44 #size-cells = <0>;
45 reg = <0x7000 0x1000>;
46 fsl,espi-num-chipselects = <4>;
47 status = "disabled";
48 };
49
Hou Zhiqiang613e49b2020-09-21 15:16:23 +053050/include/ "pq3-i2c-0.dtsi"
51/include/ "pq3-i2c-1.dtsi"
52
53/include/ "pq3-etsec1-0.dtsi"
54/include/ "pq3-etsec1-1.dtsi"
55/include/ "pq3-etsec1-2.dtsi"
Hou Zhiqiangcaa75692019-08-20 09:35:29 +000056};
Hou Zhiqiang68751492019-08-27 11:04:15 +000057
58/* PCIe controller base address 0x8000 */
59&pci2 {
60 compatible = "fsl,pcie-p1_p2", "fsl,pcie-fsl-qoriq";
61 law_trgt_if = <0>;
62 #address-cells = <3>;
63 #size-cells = <2>;
64 device_type = "pci";
65 bus-range = <0x0 0xff>;
66};
67
68/* PCIe controller base address 0x9000 */
69&pci1 {
70 compatible = "fsl,pcie-p1_p2", "fsl,pcie-fsl-qoriq";
71 law_trgt_if = <1>;
72 #address-cells = <3>;
73 #size-cells = <2>;
74 device_type = "pci";
75 bus-range = <0x0 0xff>;
76};
77
78/* PCIe controller base address 0xa000 */
79&pci0 {
80 compatible = "fsl,pcie-p1_p2", "fsl,pcie-fsl-qoriq";
81 law_trgt_if = <2>;
82 #address-cells = <3>;
83 #size-cells = <2>;
84 device_type = "pci";
85 bus-range = <0x0 0xff>;
86};