blob: 1b8373fbc64ab28407200599c04cd451c814d3bf [file] [log] [blame]
Tom Rini83d290c2018-05-06 17:58:06 -04001/* SPDX-License-Identifier: GPL-2.0+ */
Wu, Joshb2d387b2015-03-30 14:51:19 +08002/*
3 * Common part of configuration settings for the AT91 SAMA5 board.
4 *
5 * Copyright (C) 2015 Atmel Corporation
6 * Josh Wu <josh.wu@atmel.com>
Wu, Joshb2d387b2015-03-30 14:51:19 +08007 */
8
9#ifndef __AT91_SAMA5_COMMON_H
10#define __AT91_SAMA5_COMMON_H
11
Wu, Joshb2d387b2015-03-30 14:51:19 +080012/* ARM asynchronous clock */
13#define CONFIG_SYS_AT91_SLOW_CLOCK 32768
14#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */
15
16#define CONFIG_ARCH_CPU_INIT
17
18#ifndef CONFIG_SPL_BUILD
19#define CONFIG_SKIP_LOWLEVEL_INIT
20#endif
21
Wu, Joshb2d387b2015-03-30 14:51:19 +080022/* general purpose I/O */
Wenyou Yangfc977b92017-04-13 10:31:15 +080023#ifndef CONFIG_DM_GPIO
Wu, Joshb2d387b2015-03-30 14:51:19 +080024#define CONFIG_AT91_GPIO
Wenyou Yangfc977b92017-04-13 10:31:15 +080025#endif
Wu, Joshb2d387b2015-03-30 14:51:19 +080026
Wu, Joshb2d387b2015-03-30 14:51:19 +080027
28/*
29 * BOOTP options
30 */
31#define CONFIG_BOOTP_BOOTFILESIZE
Wu, Joshb2d387b2015-03-30 14:51:19 +080032
33/*
34 * Command line configuration.
35 */
Wu, Joshb2d387b2015-03-30 14:51:19 +080036
Wenyou Yang55415432017-09-14 11:07:44 +080037#ifdef CONFIG_SD_BOOT
Josh Wuac1eefe2015-09-16 11:34:14 +080038
39#ifdef CONFIG_ENV_IS_IN_MMC
40/* Use raw reserved sectors to save environment */
41#define CONFIG_ENV_OFFSET 0x2000
42#define CONFIG_ENV_SIZE 0x1000
43#define CONFIG_SYS_MMC_ENV_DEV 0
44#else
Wu, Josh372ca032015-08-19 19:11:18 +080045/* u-boot env in sd/mmc card */
Wu, Josh372ca032015-08-19 19:11:18 +080046#define CONFIG_ENV_SIZE 0x4000
Josh Wuac1eefe2015-09-16 11:34:14 +080047#endif
Wu, Josh372ca032015-08-19 19:11:18 +080048
Wu, Josh89a36582015-08-19 19:11:19 +080049#define CONFIG_BOOTCOMMAND "if test ! -n ${dtb_name}; then " \
50 "setenv dtb_name at91-${board_name}.dtb; " \
51 "fi; " \
52 "fatload mmc 0:1 0x21000000 ${dtb_name}; " \
Wu, Josh372ca032015-08-19 19:11:18 +080053 "fatload mmc 0:1 0x22000000 zImage; " \
54 "bootz 0x22000000 - 0x21000000"
Sam Protsenko5abc1a42017-08-14 20:22:17 +030055
Wu, Joshb2d387b2015-03-30 14:51:19 +080056#else
Wu, Joshdc018fe2015-08-19 19:11:20 +080057
Wenyou Yang55415432017-09-14 11:07:44 +080058#ifdef CONFIG_NAND_BOOT
Wu, Joshdc018fe2015-08-19 19:11:20 +080059/* u-boot env in nand flash */
Wu, Joshdc018fe2015-08-19 19:11:20 +080060#define CONFIG_ENV_OFFSET_REDUND 0x100000
Wu, Joshdc018fe2015-08-19 19:11:20 +080061#define CONFIG_BOOTCOMMAND "nand read 0x21000000 0x180000 0x80000;" \
62 "nand read 0x22000000 0x200000 0x600000;" \
63 "bootz 0x22000000 - 0x21000000"
Wenyou Yang55415432017-09-14 11:07:44 +080064#elif CONFIG_SPI_BOOT
Wu, Josh7a53b952015-08-19 19:11:21 +080065/* u-boot env in serial flash, by default is bus 0 and cs 0 */
Wu, Josh7a53b952015-08-19 19:11:21 +080066#define CONFIG_BOOTCOMMAND "sf probe 0; " \
67 "sf read 0x21000000 0x60000 0xc000; " \
68 "sf read 0x22000000 0x6c000 0x394000; " \
69 "bootz 0x22000000 - 0x21000000"
Cyrille Pitchen89e59c52019-06-18 08:52:01 +000070#elif CONFIG_QSPI_BOOT
71#define CONFIG_ENV_OFFSET 0x140000
72#define CONFIG_ENV_SIZE 0x20000
Cyrille Pitchen89e59c52019-06-18 08:52:01 +000073#define CONFIG_BOOTCOMMAND "sf probe 0; " \
74 "sf read 0x21000000 0x180000 0x80000; " \
75 "sf read 0x22000000 0x200000 0x600000; " \
76 "bootz 0x22000000 - 0x21000000"
Wu, Joshdc018fe2015-08-19 19:11:20 +080077#endif
78
Wu, Joshb2d387b2015-03-30 14:51:19 +080079#endif
80
Wu, Joshb2d387b2015-03-30 14:51:19 +080081/* Size of malloc() pool */
82#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024)
83
84#endif