Jaehoon Chung | 757bff4 | 2012-10-15 19:10:29 +0000 | [diff] [blame] | 1 | /* |
| 2 | * (C) Copyright 2012 SAMSUNG Electronics |
| 3 | * Jaehoon Chung <jh80.chung@samsung.com> |
| 4 | * |
Wolfgang Denk | 1a45966 | 2013-07-08 09:37:19 +0200 | [diff] [blame] | 5 | * SPDX-License-Identifier: GPL-2.0+ |
Jaehoon Chung | 757bff4 | 2012-10-15 19:10:29 +0000 | [diff] [blame] | 6 | */ |
| 7 | |
| 8 | #ifndef __DWMMC_HW_H |
| 9 | #define __DWMMC_HW_H |
| 10 | |
| 11 | #include <asm/io.h> |
| 12 | #include <mmc.h> |
| 13 | |
| 14 | #define DWMCI_CTRL 0x000 |
| 15 | #define DWMCI_PWREN 0x004 |
| 16 | #define DWMCI_CLKDIV 0x008 |
| 17 | #define DWMCI_CLKSRC 0x00C |
| 18 | #define DWMCI_CLKENA 0x010 |
| 19 | #define DWMCI_TMOUT 0x014 |
| 20 | #define DWMCI_CTYPE 0x018 |
| 21 | #define DWMCI_BLKSIZ 0x01C |
| 22 | #define DWMCI_BYTCNT 0x020 |
| 23 | #define DWMCI_INTMASK 0x024 |
| 24 | #define DWMCI_CMDARG 0x028 |
| 25 | #define DWMCI_CMD 0x02C |
| 26 | #define DWMCI_RESP0 0x030 |
| 27 | #define DWMCI_RESP1 0x034 |
| 28 | #define DWMCI_RESP2 0x038 |
| 29 | #define DWMCI_RESP3 0x03C |
| 30 | #define DWMCI_MINTSTS 0x040 |
| 31 | #define DWMCI_RINTSTS 0x044 |
| 32 | #define DWMCI_STATUS 0x048 |
| 33 | #define DWMCI_FIFOTH 0x04C |
| 34 | #define DWMCI_CDETECT 0x050 |
| 35 | #define DWMCI_WRTPRT 0x054 |
| 36 | #define DWMCI_GPIO 0x058 |
| 37 | #define DWMCI_TCMCNT 0x05C |
| 38 | #define DWMCI_TBBCNT 0x060 |
| 39 | #define DWMCI_DEBNCE 0x064 |
| 40 | #define DWMCI_USRID 0x068 |
| 41 | #define DWMCI_VERID 0x06C |
| 42 | #define DWMCI_HCON 0x070 |
| 43 | #define DWMCI_UHS_REG 0x074 |
| 44 | #define DWMCI_BMOD 0x080 |
| 45 | #define DWMCI_PLDMND 0x084 |
| 46 | #define DWMCI_DBADDR 0x088 |
| 47 | #define DWMCI_IDSTS 0x08C |
| 48 | #define DWMCI_IDINTEN 0x090 |
| 49 | #define DWMCI_DSCADDR 0x094 |
| 50 | #define DWMCI_BUFADDR 0x098 |
| 51 | #define DWMCI_DATA 0x200 |
| 52 | |
| 53 | /* Interrupt Mask register */ |
| 54 | #define DWMCI_INTMSK_ALL 0xffffffff |
| 55 | #define DWMCI_INTMSK_RE (1 << 1) |
| 56 | #define DWMCI_INTMSK_CDONE (1 << 2) |
| 57 | #define DWMCI_INTMSK_DTO (1 << 3) |
| 58 | #define DWMCI_INTMSK_TXDR (1 << 4) |
| 59 | #define DWMCI_INTMSK_RXDR (1 << 5) |
| 60 | #define DWMCI_INTMSK_DCRC (1 << 7) |
| 61 | #define DWMCI_INTMSK_RTO (1 << 8) |
| 62 | #define DWMCI_INTMSK_DRTO (1 << 9) |
| 63 | #define DWMCI_INTMSK_HTO (1 << 10) |
| 64 | #define DWMCI_INTMSK_FRUN (1 << 11) |
| 65 | #define DWMCI_INTMSK_HLE (1 << 12) |
| 66 | #define DWMCI_INTMSK_SBE (1 << 13) |
| 67 | #define DWMCI_INTMSK_ACD (1 << 14) |
| 68 | #define DWMCI_INTMSK_EBE (1 << 15) |
| 69 | |
| 70 | /* Raw interrupt Regsiter */ |
| 71 | #define DWMCI_DATA_ERR (DWMCI_INTMSK_EBE | DWMCI_INTMSK_SBE | DWMCI_INTMSK_HLE |\ |
| 72 | DWMCI_INTMSK_FRUN | DWMCI_INTMSK_EBE | DWMCI_INTMSK_DCRC) |
| 73 | #define DWMCI_DATA_TOUT (DWMCI_INTMSK_HTO | DWMCI_INTMSK_DRTO) |
| 74 | /* CTRL register */ |
| 75 | #define DWMCI_CTRL_RESET (1 << 0) |
| 76 | #define DWMCI_CTRL_FIFO_RESET (1 << 1) |
| 77 | #define DWMCI_CTRL_DMA_RESET (1 << 2) |
| 78 | #define DWMCI_DMA_EN (1 << 5) |
| 79 | #define DWMCI_CTRL_SEND_AS_CCSD (1 << 10) |
| 80 | #define DWMCI_IDMAC_EN (1 << 25) |
| 81 | #define DWMCI_RESET_ALL (DWMCI_CTRL_RESET | DWMCI_CTRL_FIFO_RESET |\ |
| 82 | DWMCI_CTRL_DMA_RESET) |
| 83 | |
| 84 | /* CMD register */ |
| 85 | #define DWMCI_CMD_RESP_EXP (1 << 6) |
| 86 | #define DWMCI_CMD_RESP_LENGTH (1 << 7) |
| 87 | #define DWMCI_CMD_CHECK_CRC (1 << 8) |
| 88 | #define DWMCI_CMD_DATA_EXP (1 << 9) |
| 89 | #define DWMCI_CMD_RW (1 << 10) |
| 90 | #define DWMCI_CMD_SEND_STOP (1 << 12) |
| 91 | #define DWMCI_CMD_ABORT_STOP (1 << 14) |
| 92 | #define DWMCI_CMD_PRV_DAT_WAIT (1 << 13) |
| 93 | #define DWMCI_CMD_UPD_CLK (1 << 21) |
| 94 | #define DWMCI_CMD_USE_HOLD_REG (1 << 29) |
| 95 | #define DWMCI_CMD_START (1 << 31) |
| 96 | |
| 97 | /* CLKENA register */ |
| 98 | #define DWMCI_CLKEN_ENABLE (1 << 0) |
| 99 | #define DWMCI_CLKEN_LOW_PWR (1 << 16) |
| 100 | |
| 101 | /* Card-type registe */ |
| 102 | #define DWMCI_CTYPE_1BIT 0 |
| 103 | #define DWMCI_CTYPE_4BIT (1 << 0) |
| 104 | #define DWMCI_CTYPE_8BIT (1 << 16) |
| 105 | |
| 106 | /* Status Register */ |
| 107 | #define DWMCI_BUSY (1 << 9) |
huang lin | a65f51b | 2015-11-17 14:20:22 +0800 | [diff] [blame] | 108 | #define DWMCI_FIFO_MASK 0x1ff |
| 109 | #define DWMCI_FIFO_SHIFT 17 |
Jaehoon Chung | 757bff4 | 2012-10-15 19:10:29 +0000 | [diff] [blame] | 110 | |
| 111 | /* FIFOTH Register */ |
| 112 | #define MSIZE(x) ((x) << 28) |
| 113 | #define RX_WMARK(x) ((x) << 16) |
| 114 | #define TX_WMARK(x) (x) |
Amar | a082a2d | 2013-04-27 11:42:55 +0530 | [diff] [blame] | 115 | #define RX_WMARK_SHIFT 16 |
| 116 | #define RX_WMARK_MASK (0xfff << RX_WMARK_SHIFT) |
Jaehoon Chung | 757bff4 | 2012-10-15 19:10:29 +0000 | [diff] [blame] | 117 | |
| 118 | #define DWMCI_IDMAC_OWN (1 << 31) |
| 119 | #define DWMCI_IDMAC_CH (1 << 4) |
| 120 | #define DWMCI_IDMAC_FS (1 << 3) |
| 121 | #define DWMCI_IDMAC_LD (1 << 2) |
| 122 | |
| 123 | /* Bus Mode Register */ |
| 124 | #define DWMCI_BMOD_IDMAC_RESET (1 << 0) |
| 125 | #define DWMCI_BMOD_IDMAC_FB (1 << 1) |
| 126 | #define DWMCI_BMOD_IDMAC_EN (1 << 7) |
| 127 | |
Jaehoon Chung | 045bdcd | 2014-05-16 13:59:55 +0900 | [diff] [blame] | 128 | /* UHS register */ |
| 129 | #define DWMCI_DDR_MODE (1 << 16) |
| 130 | |
Rajeshwari Shinde | 6f0b7ca | 2013-10-29 12:53:13 +0530 | [diff] [blame] | 131 | /* quirks */ |
| 132 | #define DWMCI_QUIRK_DISABLE_SMU (1 << 0) |
| 133 | |
Simon Glass | 6dc7141 | 2015-06-23 15:38:52 -0600 | [diff] [blame] | 134 | /** |
| 135 | * struct dwmci_host - Information about a designware MMC host |
| 136 | * |
| 137 | * @name: Device name |
| 138 | * @ioaddr: Base I/O address of controller |
| 139 | * @quirks: Quick flags - see DWMCI_QUIRK_... |
| 140 | * @caps: Capabilities - see MMC_MODE_... |
| 141 | * @bus_hz: Bus speed in Hz, if @get_mmc_clk() is NULL |
| 142 | * @div: Arbitrary clock divider value for use by controller |
| 143 | * @dev_index: Arbitrary device index for use by controller |
| 144 | * @dev_id: Arbitrary device ID for use by controller |
| 145 | * @buswidth: Bus width in bits (8 or 4) |
| 146 | * @fifoth_val: Value for FIFOTH register (or 0 to leave unset) |
| 147 | * @mmc: Pointer to generic MMC structure for this device |
| 148 | * @priv: Private pointer for use by controller |
| 149 | */ |
Jaehoon Chung | 757bff4 | 2012-10-15 19:10:29 +0000 | [diff] [blame] | 150 | struct dwmci_host { |
Simon Glass | 6dc7141 | 2015-06-23 15:38:52 -0600 | [diff] [blame] | 151 | const char *name; |
Jaehoon Chung | 757bff4 | 2012-10-15 19:10:29 +0000 | [diff] [blame] | 152 | void *ioaddr; |
| 153 | unsigned int quirks; |
| 154 | unsigned int caps; |
| 155 | unsigned int version; |
| 156 | unsigned int clock; |
| 157 | unsigned int bus_hz; |
Jaehoon Chung | 959198f | 2014-05-16 13:59:52 +0900 | [diff] [blame] | 158 | unsigned int div; |
Jaehoon Chung | 757bff4 | 2012-10-15 19:10:29 +0000 | [diff] [blame] | 159 | int dev_index; |
Jaehoon Chung | 959198f | 2014-05-16 13:59:52 +0900 | [diff] [blame] | 160 | int dev_id; |
Jaehoon Chung | 757bff4 | 2012-10-15 19:10:29 +0000 | [diff] [blame] | 161 | int buswidth; |
Jaehoon Chung | 757bff4 | 2012-10-15 19:10:29 +0000 | [diff] [blame] | 162 | u32 fifoth_val; |
| 163 | struct mmc *mmc; |
Jaehoon Chung | 5dab81c | 2015-02-04 15:48:40 +0900 | [diff] [blame] | 164 | void *priv; |
Jaehoon Chung | 757bff4 | 2012-10-15 19:10:29 +0000 | [diff] [blame] | 165 | |
| 166 | void (*clksel)(struct dwmci_host *host); |
Jaehoon Chung | 18ab675 | 2013-11-29 20:08:57 +0900 | [diff] [blame] | 167 | void (*board_init)(struct dwmci_host *host); |
Simon Glass | e3563f2 | 2015-08-30 16:55:15 -0600 | [diff] [blame] | 168 | |
| 169 | /** |
| 170 | * Get / set a particular MMC clock frequency |
| 171 | * |
| 172 | * This is used to request the current clock frequency of the clock |
| 173 | * that drives the DWMMC peripheral. The caller will then use this |
| 174 | * information to work out the divider it needs to achieve the |
| 175 | * required MMC bus clock frequency. If you want to handle the |
| 176 | * clock external to DWMMC, use @freq to select the frequency and |
| 177 | * return that value too. Then DWMMC will put itself in bypass mode. |
| 178 | * |
| 179 | * @host: DWMMC host |
| 180 | * @freq: Frequency the host is trying to achieve |
| 181 | */ |
| 182 | unsigned int (*get_mmc_clk)(struct dwmci_host *host, uint freq); |
Pantelis Antoniou | 93bfd61 | 2014-03-11 19:34:20 +0200 | [diff] [blame] | 183 | |
| 184 | struct mmc_config cfg; |
huang lin | a65f51b | 2015-11-17 14:20:22 +0800 | [diff] [blame] | 185 | |
| 186 | /* use fifo mode to read and write data */ |
| 187 | bool fifo_mode; |
Jaehoon Chung | 757bff4 | 2012-10-15 19:10:29 +0000 | [diff] [blame] | 188 | }; |
| 189 | |
| 190 | struct dwmci_idmac { |
| 191 | u32 flags; |
| 192 | u32 cnt; |
| 193 | u32 addr; |
| 194 | u32 next_addr; |
Marek Vasut | 1bf29b3 | 2014-09-15 01:18:15 +0200 | [diff] [blame] | 195 | } __aligned(ARCH_DMA_MINALIGN); |
Jaehoon Chung | 757bff4 | 2012-10-15 19:10:29 +0000 | [diff] [blame] | 196 | |
| 197 | static inline void dwmci_writel(struct dwmci_host *host, int reg, u32 val) |
| 198 | { |
| 199 | writel(val, host->ioaddr + reg); |
| 200 | } |
| 201 | |
| 202 | static inline void dwmci_writew(struct dwmci_host *host, int reg, u16 val) |
| 203 | { |
| 204 | writew(val, host->ioaddr + reg); |
| 205 | } |
| 206 | |
| 207 | static inline void dwmci_writeb(struct dwmci_host *host, int reg, u8 val) |
| 208 | { |
| 209 | writeb(val, host->ioaddr + reg); |
| 210 | } |
| 211 | static inline u32 dwmci_readl(struct dwmci_host *host, int reg) |
| 212 | { |
| 213 | return readl(host->ioaddr + reg); |
| 214 | } |
| 215 | |
| 216 | static inline u16 dwmci_readw(struct dwmci_host *host, int reg) |
| 217 | { |
| 218 | return readw(host->ioaddr + reg); |
| 219 | } |
| 220 | |
| 221 | static inline u8 dwmci_readb(struct dwmci_host *host, int reg) |
| 222 | { |
| 223 | return readb(host->ioaddr + reg); |
| 224 | } |
| 225 | |
| 226 | int add_dwmci(struct dwmci_host *host, u32 max_clk, u32 min_clk); |
| 227 | #endif /* __DWMMC_HW_H */ |