blob: 4c3acba35a9d8729f6168b8b7565b7c93c5f2162 [file] [log] [blame]
Tom Rini83d290c2018-05-06 17:58:06 -04001/* SPDX-License-Identifier: GPL-2.0+ */
wdenkfe8c2802002-11-03 00:38:21 +00002/*------------------------------------------------------------------------
3 . smc91111.h - macros for the LAN91C111 Ethernet Driver
4 .
5 . (C) Copyright 2002
6 . Sysgo Real-Time Solutions, GmbH <www.elinos.com>
7 . Rolf Offermanns <rof@sysgo.de>
8 . Copyright (C) 2001 Standard Microsystems Corporation (SMSC)
9 . Developed by Simple Network Magic Corporation (SNMC)
10 . Copyright (C) 1996 by Erik Stahlman (ES)
11 .
wdenkfe8c2802002-11-03 00:38:21 +000012 . This file contains register information and access macros for
13 . the LAN91C111 single chip ethernet controller. It is a modified
14 . version of the smc9194.h file.
15 .
16 . Information contained in this file was obtained from the LAN91C111
17 . manual from SMC. To get a copy, if you really want one, you can find
18 . information under www.smsc.com.
19 .
20 . Authors
Wolfgang Denk53677ef2008-05-20 16:00:29 +020021 . Erik Stahlman ( erik@vt.edu )
wdenkfe8c2802002-11-03 00:38:21 +000022 . Daris A Nevil ( dnevil@snmc.com )
23 .
24 . History
25 . 03/16/01 Daris A Nevil Modified for use with LAN91C111 device
26 .
27 ---------------------------------------------------------------------------*/
28#ifndef _SMC91111_H_
29#define _SMC91111_H_
30
31#include <asm/types.h>
32#include <config.h>
Simon Glass90526e92020-05-10 11:39:56 -060033#include <net.h>
wdenkfe8c2802002-11-03 00:38:21 +000034
35/*
36 * This function may be called by the board specific initialisation code
37 * in order to override the default mac address.
38 */
39
Wolfgang Denkd52fb7e2006-03-11 22:53:33 +010040void smc_set_mac_addr (const unsigned char *addr);
wdenkfe8c2802002-11-03 00:38:21 +000041
42
43/* I want some simple types */
44
45typedef unsigned char byte;
46typedef unsigned short word;
Wolfgang Denk53677ef2008-05-20 16:00:29 +020047typedef unsigned long int dword;
wdenkfe8c2802002-11-03 00:38:21 +000048
Ben Warren7194ab82009-10-04 22:37:03 -070049struct smc91111_priv{
50 u8 dev_num;
51};
52
wdenkfe8c2802002-11-03 00:38:21 +000053/*
54 . DEBUGGING LEVELS
55 .
56 . 0 for normal operation
57 . 1 for slightly more details
58 . >2 for various levels of increasingly useless information
59 . 2 for interrupt tracking, status flags
60 . 3 for packet info
61 . 4 for complete packet dumps
62*/
63/*#define SMC_DEBUG 0 */
64
65/* Because of bank switching, the LAN91xxx uses only 16 I/O ports */
66
67#define SMC_IO_EXTENT 16
68
Marek Vasutabc20ab2011-11-26 07:20:07 +010069#ifdef CONFIG_CPU_PXA25X
wdenkfe8c2802002-11-03 00:38:21 +000070
wdenkca0e7742004-06-09 15:37:23 +000071#ifdef CONFIG_XSENGINE
Ben Warren1031ae92009-11-09 14:01:08 -080072#define SMC_inl(a,r) (*((volatile dword *)((a)->iobase+((r)<<1))))
73#define SMC_inw(a,r) (*((volatile word *)((a)->iobase+((r)<<1))))
Ben Warren7194ab82009-10-04 22:37:03 -070074#define SMC_inb(a,p) ({ \
Ben Warren1031ae92009-11-09 14:01:08 -080075 unsigned int __p = (unsigned int)((a)->iobase + ((p)<<1)); \
wdenkca0e7742004-06-09 15:37:23 +000076 unsigned int __v = *(volatile unsigned short *)((__p) & ~2); \
77 if (__p & 2) __v >>= 8; \
78 else __v &= 0xff; \
79 __v; })
80#else
Ben Warren7194ab82009-10-04 22:37:03 -070081#define SMC_inl(a,r) (*((volatile dword *)((a)->iobase+(r))))
82#define SMC_inw(a,r) (*((volatile word *)((a)->iobase+(r))))
83#define SMC_inb(a,p) ({ \
84 unsigned int __p = (unsigned int)((a)->iobase + (p)); \
wdenk487778b2003-06-06 11:20:01 +000085 unsigned int __v = *(volatile unsigned short *)((__p) & ~1); \
wdenkfe8c2802002-11-03 00:38:21 +000086 if (__p & 1) __v >>= 8; \
87 else __v &= 0xff; \
88 __v; })
wdenkca0e7742004-06-09 15:37:23 +000089#endif
wdenkfe8c2802002-11-03 00:38:21 +000090
wdenkca0e7742004-06-09 15:37:23 +000091#ifdef CONFIG_XSENGINE
Ben Warren7194ab82009-10-04 22:37:03 -070092#define SMC_outl(a,d,r) (*((volatile dword *)((a)->iobase+(r<<1))) = d)
93#define SMC_outw(a,d,r) (*((volatile word *)((a)->iobase+(r<<1))) = d)
wdenkca0e7742004-06-09 15:37:23 +000094#else
Ben Warren7194ab82009-10-04 22:37:03 -070095#define SMC_outl(a,d,r) (*((volatile dword *)((a)->iobase+(r))) = d)
96#define SMC_outw(a,d,r) (*((volatile word *)((a)->iobase+(r))) = d)
wdenkca0e7742004-06-09 15:37:23 +000097#endif
98
Ben Warren7194ab82009-10-04 22:37:03 -070099#define SMC_outb(a,d,r) ({ word __d = (byte)(d); \
100 word __w = SMC_inw((a),(r)&~1); \
wdenkfe8c2802002-11-03 00:38:21 +0000101 __w &= ((r)&1) ? 0x00FF : 0xFF00; \
102 __w |= ((r)&1) ? __d<<8 : __d; \
Ben Warren7194ab82009-10-04 22:37:03 -0700103 SMC_outw((a),__w,(r)&~1); \
wdenkfe8c2802002-11-03 00:38:21 +0000104 })
105
Ben Warren7194ab82009-10-04 22:37:03 -0700106#define SMC_outsl(a,r,b,l) ({ int __i; \
wdenkfe8c2802002-11-03 00:38:21 +0000107 dword *__b2; \
108 __b2 = (dword *) b; \
109 for (__i = 0; __i < l; __i++) { \
Ben Warren7194ab82009-10-04 22:37:03 -0700110 SMC_outl((a), *(__b2 + __i), r); \
wdenkfe8c2802002-11-03 00:38:21 +0000111 } \
112 })
113
Ben Warren7194ab82009-10-04 22:37:03 -0700114#define SMC_outsw(a,r,b,l) ({ int __i; \
wdenkfe8c2802002-11-03 00:38:21 +0000115 word *__b2; \
116 __b2 = (word *) b; \
117 for (__i = 0; __i < l; __i++) { \
Ben Warren7194ab82009-10-04 22:37:03 -0700118 SMC_outw((a), *(__b2 + __i), r); \
wdenkfe8c2802002-11-03 00:38:21 +0000119 } \
120 })
121
Ben Warren7194ab82009-10-04 22:37:03 -0700122#define SMC_insl(a,r,b,l) ({ int __i ; \
wdenkfe8c2802002-11-03 00:38:21 +0000123 dword *__b2; \
Wolfgang Denk53677ef2008-05-20 16:00:29 +0200124 __b2 = (dword *) b; \
125 for (__i = 0; __i < l; __i++) { \
Ben Warren7194ab82009-10-04 22:37:03 -0700126 *(__b2 + __i) = SMC_inl((a),(r)); \
127 SMC_inl((a),0); \
wdenkfe8c2802002-11-03 00:38:21 +0000128 }; \
129 })
130
Ben Warren7194ab82009-10-04 22:37:03 -0700131#define SMC_insw(a,r,b,l) ({ int __i ; \
wdenkfe8c2802002-11-03 00:38:21 +0000132 word *__b2; \
Wolfgang Denk53677ef2008-05-20 16:00:29 +0200133 __b2 = (word *) b; \
134 for (__i = 0; __i < l; __i++) { \
Ben Warren7194ab82009-10-04 22:37:03 -0700135 *(__b2 + __i) = SMC_inw((a),(r)); \
136 SMC_inw((a),0); \
wdenkfe8c2802002-11-03 00:38:21 +0000137 }; \
138 })
139
Ben Warren7194ab82009-10-04 22:37:03 -0700140#define SMC_insb(a,r,b,l) ({ int __i ; \
wdenkfe8c2802002-11-03 00:38:21 +0000141 byte *__b2; \
Wolfgang Denk53677ef2008-05-20 16:00:29 +0200142 __b2 = (byte *) b; \
143 for (__i = 0; __i < l; __i++) { \
Ben Warren7194ab82009-10-04 22:37:03 -0700144 *(__b2 + __i) = SMC_inb((a),(r)); \
145 SMC_inb((a),0); \
wdenkfe8c2802002-11-03 00:38:21 +0000146 }; \
147 })
148
Marek Vasutabc20ab2011-11-26 07:20:07 +0100149#elif defined(CONFIG_LEON) /* if not CONFIG_CPU_PXA25X */
Daniel Hellstrom3eac6402008-03-31 14:25:00 +0000150
151#define SMC_LEON_SWAP16(_x_) ({ word _x = (_x_); ((_x << 8) | (_x >> 8)); })
152
153#define SMC_LEON_SWAP32(_x_) \
154 ({ dword _x = (_x_); \
155 ((_x << 24) | \
156 ((0x0000FF00UL & _x) << 8) | \
157 ((0x00FF0000UL & _x) >> 8) | \
158 (_x >> 24)); })
159
Ben Warren7194ab82009-10-04 22:37:03 -0700160#define SMC_inl(a,r) (SMC_LEON_SWAP32((*(volatile dword *)((a)->iobase+((r)<<0)))))
161#define SMC_inl_nosw(a,r) ((*(volatile dword *)((a)->iobase+((r)<<0))))
162#define SMC_inw(a,r) (SMC_LEON_SWAP16((*(volatile word *)((a)->iobase+((r)<<0)))))
163#define SMC_inw_nosw(a,r) ((*(volatile word *)((a)->iobase+((r)<<0))))
164#define SMC_inb(a,p) ({ \
165 word ___v = SMC_inw((a),(p) & ~1); \
Daniel Hellstrom3eac6402008-03-31 14:25:00 +0000166 if ((p) & 1) ___v >>= 8; \
167 else ___v &= 0xff; \
168 ___v; })
169
Ben Warren7194ab82009-10-04 22:37:03 -0700170#define SMC_outl(a,d,r) (*(volatile dword *)((a)->iobase+((r)<<0))=SMC_LEON_SWAP32(d))
171#define SMC_outl_nosw(a,d,r) (*(volatile dword *)((a)->iobase+((r)<<0))=(d))
172#define SMC_outw(a,d,r) (*(volatile word *)((a)->iobase+((r)<<0))=SMC_LEON_SWAP16(d))
173#define SMC_outw_nosw(a,d,r) (*(volatile word *)((a)->iobase+((r)<<0))=(d))
174#define SMC_outb(a,d,r) do{ word __d = (byte)(d); \
175 word __w = SMC_inw((a),(r)&~1); \
Daniel Hellstrom3eac6402008-03-31 14:25:00 +0000176 __w &= ((r)&1) ? 0x00FF : 0xFF00; \
177 __w |= ((r)&1) ? __d<<8 : __d; \
Ben Warren7194ab82009-10-04 22:37:03 -0700178 SMC_outw((a),__w,(r)&~1); \
Daniel Hellstrom3eac6402008-03-31 14:25:00 +0000179 }while(0)
Ben Warren7194ab82009-10-04 22:37:03 -0700180#define SMC_outsl(a,r,b,l) do{ int __i; \
Daniel Hellstrom3eac6402008-03-31 14:25:00 +0000181 dword *__b2; \
182 __b2 = (dword *) b; \
183 for (__i = 0; __i < l; __i++) { \
Ben Warren7194ab82009-10-04 22:37:03 -0700184 SMC_outl_nosw((a), *(__b2 + __i), r); \
Daniel Hellstrom3eac6402008-03-31 14:25:00 +0000185 } \
186 }while(0)
Ben Warren7194ab82009-10-04 22:37:03 -0700187#define SMC_outsw(a,r,b,l) do{ int __i; \
Daniel Hellstrom3eac6402008-03-31 14:25:00 +0000188 word *__b2; \
189 __b2 = (word *) b; \
190 for (__i = 0; __i < l; __i++) { \
Ben Warren7194ab82009-10-04 22:37:03 -0700191 SMC_outw_nosw((a), *(__b2 + __i), r); \
Daniel Hellstrom3eac6402008-03-31 14:25:00 +0000192 } \
193 }while(0)
Ben Warren7194ab82009-10-04 22:37:03 -0700194#define SMC_insl(a,r,b,l) do{ int __i ; \
Daniel Hellstrom3eac6402008-03-31 14:25:00 +0000195 dword *__b2; \
196 __b2 = (dword *) b; \
197 for (__i = 0; __i < l; __i++) { \
Ben Warren7194ab82009-10-04 22:37:03 -0700198 *(__b2 + __i) = SMC_inl_nosw((a),(r)); \
Daniel Hellstrom3eac6402008-03-31 14:25:00 +0000199 }; \
200 }while(0)
201
Ben Warren7194ab82009-10-04 22:37:03 -0700202#define SMC_insw(a,r,b,l) do{ int __i ; \
Daniel Hellstrom3eac6402008-03-31 14:25:00 +0000203 word *__b2; \
204 __b2 = (word *) b; \
205 for (__i = 0; __i < l; __i++) { \
Ben Warren7194ab82009-10-04 22:37:03 -0700206 *(__b2 + __i) = SMC_inw_nosw((a),(r)); \
Daniel Hellstrom3eac6402008-03-31 14:25:00 +0000207 }; \
208 }while(0)
209
Ben Warren7194ab82009-10-04 22:37:03 -0700210#define SMC_insb(a,r,b,l) do{ int __i ; \
Daniel Hellstrom3eac6402008-03-31 14:25:00 +0000211 byte *__b2; \
212 __b2 = (byte *) b; \
213 for (__i = 0; __i < l; __i++) { \
Ben Warren7194ab82009-10-04 22:37:03 -0700214 *(__b2 + __i) = SMC_inb((a),(r)); \
Daniel Hellstrom3eac6402008-03-31 14:25:00 +0000215 }; \
216 }while(0)
Yoshinori Satoe9efe162014-02-13 23:13:41 +0900217#elif defined(CONFIG_MS7206SE)
218#define SWAB7206(x) ({ word __x = x; ((__x << 8)|(__x >> 8)); })
219#define SMC_inw(a, r) *((volatile word*)((a)->iobase + (r)))
220#define SMC_inb(a, r) (*((volatile byte*)((a)->iobase + ((r) ^ 0x01))))
221#define SMC_insw(a, r, b, l) \
222 do { \
223 int __i; \
224 word *__b2 = (word *)(b); \
225 for (__i = 0; __i < (l); __i++) { \
226 *__b2++ = SWAB7206(SMC_inw(a, r)); \
227 } \
228 } while (0)
229#define SMC_outw(a, d, r) (*((volatile word *)((a)->iobase+(r))) = d)
230#define SMC_outb(a, d, r) ({ word __d = (byte)(d); \
231 word __w = SMC_inw((a), ((r)&(~1))); \
232 if (((r) & 1)) \
233 __w = (__w & 0x00ff) | (__d << 8); \
234 else \
235 __w = (__w & 0xff00) | (__d); \
236 SMC_outw((a), __w, ((r)&(~1))); \
237 })
238#define SMC_outsw(a, r, b, l) \
239 do { \
240 int __i; \
241 word *__b2 = (word *)(b); \
242 for (__i = 0; __i < (l); __i++) { \
243 SMC_outw(a, SWAB7206(*__b2), r); \
244 __b2++; \
245 } \
246 } while (0)
Marek Vasutabc20ab2011-11-26 07:20:07 +0100247#else /* if not CONFIG_CPU_PXA25X and not CONFIG_LEON */
wdenkfe8c2802002-11-03 00:38:21 +0000248
wdenkc3c7f862004-06-09 14:47:54 +0000249#ifndef CONFIG_SMC_USE_IOFUNCS /* these macros don't work on some boards */
wdenkfe8c2802002-11-03 00:38:21 +0000250/*
251 * We have only 16 Bit PCMCIA access on Socket 0
252 */
253
wdenkaaf224a2004-03-14 15:20:55 +0000254#ifdef CONFIG_ADNPESC1
Ben Warren7194ab82009-10-04 22:37:03 -0700255#define SMC_inw(a,r) (*((volatile word *)((a)->iobase+((r)<<1))))
Bhupesh Sharmaee456332014-02-05 13:09:56 +0530256#elif CONFIG_ARM64
257#define SMC_inw(a, r) (*((volatile word*)((a)->iobase+((dword)(r)))))
wdenkaaf224a2004-03-14 15:20:55 +0000258#else
Bhupesh Sharmaee456332014-02-05 13:09:56 +0530259#define SMC_inw(a, r) (*((volatile word*)((a)->iobase+(r))))
wdenkaaf224a2004-03-14 15:20:55 +0000260#endif
Ben Warren7194ab82009-10-04 22:37:03 -0700261#define SMC_inb(a,r) (((r)&1) ? SMC_inw((a),(r)&~1)>>8 : SMC_inw((a),(r)&0xFF))
wdenkfe8c2802002-11-03 00:38:21 +0000262
wdenkaaf224a2004-03-14 15:20:55 +0000263#ifdef CONFIG_ADNPESC1
Ben Warren7194ab82009-10-04 22:37:03 -0700264#define SMC_outw(a,d,r) (*((volatile word *)((a)->iobase+((r)<<1))) = d)
Bhupesh Sharmaee456332014-02-05 13:09:56 +0530265#elif CONFIG_ARM64
266#define SMC_outw(a, d, r) \
267 (*((volatile word*)((a)->iobase+((dword)(r)))) = d)
wdenkaaf224a2004-03-14 15:20:55 +0000268#else
Bhupesh Sharmaee456332014-02-05 13:09:56 +0530269#define SMC_outw(a, d, r) \
270 (*((volatile word*)((a)->iobase+(r))) = d)
wdenkaaf224a2004-03-14 15:20:55 +0000271#endif
Ben Warren7194ab82009-10-04 22:37:03 -0700272#define SMC_outb(a,d,r) ({ word __d = (byte)(d); \
273 word __w = SMC_inw((a),(r)&~1); \
wdenkfe8c2802002-11-03 00:38:21 +0000274 __w &= ((r)&1) ? 0x00FF : 0xFF00; \
275 __w |= ((r)&1) ? __d<<8 : __d; \
Ben Warren7194ab82009-10-04 22:37:03 -0700276 SMC_outw((a),__w,(r)&~1); \
wdenkfe8c2802002-11-03 00:38:21 +0000277 })
278#if 0
Ben Warren7194ab82009-10-04 22:37:03 -0700279#define SMC_outsw(a,r,b,l) outsw((a)->iobase+(r), (b), (l))
wdenkfe8c2802002-11-03 00:38:21 +0000280#else
Ben Warren7194ab82009-10-04 22:37:03 -0700281#define SMC_outsw(a,r,b,l) ({ int __i; \
wdenkfe8c2802002-11-03 00:38:21 +0000282 word *__b2; \
283 __b2 = (word *) b; \
284 for (__i = 0; __i < l; __i++) { \
Ben Warren7194ab82009-10-04 22:37:03 -0700285 SMC_outw((a), *(__b2 + __i), r); \
wdenkfe8c2802002-11-03 00:38:21 +0000286 } \
287 })
288#endif
289
290#if 0
Ben Warren7194ab82009-10-04 22:37:03 -0700291#define SMC_insw(a,r,b,l) insw((a)->iobase+(r), (b), (l))
wdenkfe8c2802002-11-03 00:38:21 +0000292#else
Ben Warren7194ab82009-10-04 22:37:03 -0700293#define SMC_insw(a,r,b,l) ({ int __i ; \
wdenkfe8c2802002-11-03 00:38:21 +0000294 word *__b2; \
Wolfgang Denk53677ef2008-05-20 16:00:29 +0200295 __b2 = (word *) b; \
296 for (__i = 0; __i < l; __i++) { \
Ben Warren7194ab82009-10-04 22:37:03 -0700297 *(__b2 + __i) = SMC_inw((a),(r)); \
298 SMC_inw((a),0); \
wdenkfe8c2802002-11-03 00:38:21 +0000299 }; \
300 })
301#endif
302
wdenkc3c7f862004-06-09 14:47:54 +0000303#endif /* CONFIG_SMC_USE_IOFUNCS */
304
wdenka3ad8e22003-10-19 23:22:11 +0000305#if defined(CONFIG_SMC_USE_32_BIT)
306
wdenkca0e7742004-06-09 15:37:23 +0000307#ifdef CONFIG_XSENGINE
Ben Warren7194ab82009-10-04 22:37:03 -0700308#define SMC_inl(a,r) (*((volatile dword *)((a)->iobase+(r<<1))))
wdenkca0e7742004-06-09 15:37:23 +0000309#else
Ben Warren7194ab82009-10-04 22:37:03 -0700310#define SMC_inl(a,r) (*((volatile dword *)((a)->iobase+(r))))
wdenkca0e7742004-06-09 15:37:23 +0000311#endif
wdenka3ad8e22003-10-19 23:22:11 +0000312
Ben Warren7194ab82009-10-04 22:37:03 -0700313#define SMC_insl(a,r,b,l) ({ int __i ; \
wdenka3ad8e22003-10-19 23:22:11 +0000314 dword *__b2; \
Wolfgang Denk53677ef2008-05-20 16:00:29 +0200315 __b2 = (dword *) b; \
316 for (__i = 0; __i < l; __i++) { \
Ben Warren7194ab82009-10-04 22:37:03 -0700317 *(__b2 + __i) = SMC_inl((a),(r)); \
318 SMC_inl((a),0); \
wdenka3ad8e22003-10-19 23:22:11 +0000319 }; \
320 })
321
wdenkca0e7742004-06-09 15:37:23 +0000322#ifdef CONFIG_XSENGINE
Ben Warren7194ab82009-10-04 22:37:03 -0700323#define SMC_outl(a,d,r) (*((volatile dword *)((a)->iobase+(r<<1))) = d)
wdenkca0e7742004-06-09 15:37:23 +0000324#else
Ben Warren7194ab82009-10-04 22:37:03 -0700325#define SMC_outl(a,d,r) (*((volatile dword *)((a)->iobase+(r))) = d)
wdenkca0e7742004-06-09 15:37:23 +0000326#endif
Ben Warren7194ab82009-10-04 22:37:03 -0700327#define SMC_outsl(a,r,b,l) ({ int __i; \
wdenka3ad8e22003-10-19 23:22:11 +0000328 dword *__b2; \
329 __b2 = (dword *) b; \
330 for (__i = 0; __i < l; __i++) { \
Ben Warren7194ab82009-10-04 22:37:03 -0700331 SMC_outl((a), *(__b2 + __i), r); \
wdenka3ad8e22003-10-19 23:22:11 +0000332 } \
333 })
334
335#endif /* CONFIG_SMC_USE_32_BIT */
336
wdenkfe8c2802002-11-03 00:38:21 +0000337#endif
338
339/*---------------------------------------------------------------
340 .
341 . A description of the SMSC registers is probably in order here,
342 . although for details, the SMC datasheet is invaluable.
343 .
344 . Basically, the chip has 4 banks of registers ( 0 to 3 ), which
345 . are accessed by writing a number into the BANK_SELECT register
346 . ( I also use a SMC_SELECT_BANK macro for this ).
347 .
348 . The banks are configured so that for most purposes, bank 2 is all
349 . that is needed for simple run time tasks.
350 -----------------------------------------------------------------------*/
351
352/*
353 . Bank Select Register:
354 .
355 . yyyy yyyy 0000 00xx
Wolfgang Denk53677ef2008-05-20 16:00:29 +0200356 . xx = bank number
wdenkfe8c2802002-11-03 00:38:21 +0000357 . yyyy yyyy = 0x33, for identification purposes.
358*/
359#define BANK_SELECT 14
360
361/* Transmit Control Register */
362/* BANK 0 */
Wolfgang Denk53677ef2008-05-20 16:00:29 +0200363#define TCR_REG 0x0000 /* transmit control register */
wdenkfe8c2802002-11-03 00:38:21 +0000364#define TCR_ENABLE 0x0001 /* When 1 we can transmit */
365#define TCR_LOOP 0x0002 /* Controls output pin LBK */
366#define TCR_FORCOL 0x0004 /* When 1 will force a collision */
367#define TCR_PAD_EN 0x0080 /* When 1 will pad tx frames < 64 bytes w/0 */
368#define TCR_NOCRC 0x0100 /* When 1 will not append CRC to tx frames */
369#define TCR_MON_CSN 0x0400 /* When 1 tx monitors carrier */
Wolfgang Denk53677ef2008-05-20 16:00:29 +0200370#define TCR_FDUPLX 0x0800 /* When 1 enables full duplex operation */
wdenkfe8c2802002-11-03 00:38:21 +0000371#define TCR_STP_SQET 0x1000 /* When 1 stops tx if Signal Quality Error */
372#define TCR_EPH_LOOP 0x2000 /* When 1 enables EPH block loopback */
373#define TCR_SWFDUP 0x8000 /* When 1 enables Switched Full Duplex mode */
374
375#define TCR_CLEAR 0 /* do NOTHING */
376/* the default settings for the TCR register : */
377/* QUESTION: do I want to enable padding of short packets ? */
Wolfgang Denk53677ef2008-05-20 16:00:29 +0200378#define TCR_DEFAULT TCR_ENABLE
wdenkfe8c2802002-11-03 00:38:21 +0000379
380
381/* EPH Status Register */
382/* BANK 0 */
383#define EPH_STATUS_REG 0x0002
384#define ES_TX_SUC 0x0001 /* Last TX was successful */
385#define ES_SNGL_COL 0x0002 /* Single collision detected for last tx */
386#define ES_MUL_COL 0x0004 /* Multiple collisions detected for last tx */
387#define ES_LTX_MULT 0x0008 /* Last tx was a multicast */
388#define ES_16COL 0x0010 /* 16 Collisions Reached */
389#define ES_SQET 0x0020 /* Signal Quality Error Test */
390#define ES_LTXBRD 0x0040 /* Last tx was a broadcast */
391#define ES_TXDEFR 0x0080 /* Transmit Deferred */
392#define ES_LATCOL 0x0200 /* Late collision detected on last tx */
393#define ES_LOSTCARR 0x0400 /* Lost Carrier Sense */
394#define ES_EXC_DEF 0x0800 /* Excessive Deferral */
395#define ES_CTR_ROL 0x1000 /* Counter Roll Over indication */
396#define ES_LINK_OK 0x4000 /* Driven by inverted value of nLNK pin */
397#define ES_TXUNRN 0x8000 /* Tx Underrun */
398
399
400/* Receive Control Register */
401/* BANK 0 */
402#define RCR_REG 0x0004
403#define RCR_RX_ABORT 0x0001 /* Set if a rx frame was aborted */
404#define RCR_PRMS 0x0002 /* Enable promiscuous mode */
405#define RCR_ALMUL 0x0004 /* When set accepts all multicast frames */
406#define RCR_RXEN 0x0100 /* IFF this is set, we can receive packets */
407#define RCR_STRIP_CRC 0x0200 /* When set strips CRC from rx packets */
408#define RCR_ABORT_ENB 0x0200 /* When set will abort rx on collision */
409#define RCR_FILT_CAR 0x0400 /* When set filters leading 12 bit s of carrier */
Wolfgang Denk53677ef2008-05-20 16:00:29 +0200410#define RCR_SOFTRST 0x8000 /* resets the chip */
wdenkfe8c2802002-11-03 00:38:21 +0000411
412/* the normal settings for the RCR register : */
413#define RCR_DEFAULT (RCR_STRIP_CRC | RCR_RXEN)
414#define RCR_CLEAR 0x0 /* set it to a base state */
415
416/* Counter Register */
417/* BANK 0 */
418#define COUNTER_REG 0x0006
419
420/* Memory Information Register */
421/* BANK 0 */
422#define MIR_REG 0x0008
423
424/* Receive/Phy Control Register */
425/* BANK 0 */
426#define RPC_REG 0x000A
427#define RPC_SPEED 0x2000 /* When 1 PHY is in 100Mbps mode. */
428#define RPC_DPLX 0x1000 /* When 1 PHY is in Full-Duplex Mode */
429#define RPC_ANEG 0x0800 /* When 1 PHY is in Auto-Negotiate Mode */
430#define RPC_LSXA_SHFT 5 /* Bits to shift LS2A,LS1A,LS0A to lsb */
431#define RPC_LSXB_SHFT 2 /* Bits to get LS2B,LS1B,LS0B to lsb */
432#define RPC_LED_100_10 (0x00) /* LED = 100Mbps OR's with 10Mbps link detect */
433#define RPC_LED_RES (0x01) /* LED = Reserved */
434#define RPC_LED_10 (0x02) /* LED = 10Mbps link detect */
435#define RPC_LED_FD (0x03) /* LED = Full Duplex Mode */
436#define RPC_LED_TX_RX (0x04) /* LED = TX or RX packet occurred */
437#define RPC_LED_100 (0x05) /* LED = 100Mbps link dectect */
438#define RPC_LED_TX (0x06) /* LED = TX packet occurred */
439#define RPC_LED_RX (0x07) /* LED = RX packet occurred */
wdenkc935d3b2004-01-03 19:43:48 +0000440#if defined(CONFIG_DK1C20) || defined(CONFIG_DK1S10)
wdenk8bf3b002003-12-06 23:20:41 +0000441/* buggy schematic: LEDa -> yellow, LEDb --> green */
442#define RPC_DEFAULT ( RPC_SPEED | RPC_DPLX | RPC_ANEG \
443 | (RPC_LED_TX_RX << RPC_LSXA_SHFT) \
444 | (RPC_LED_100_10 << RPC_LSXB_SHFT) )
wdenkaaf224a2004-03-14 15:20:55 +0000445#elif defined(CONFIG_ADNPESC1)
446/* SSV ADNP/ESC1 has only one LED: LEDa -> Rx/Tx indicator */
447#define RPC_DEFAULT ( RPC_SPEED | RPC_DPLX | RPC_ANEG \
448 | (RPC_LED_TX_RX << RPC_LSXA_SHFT) \
449 | (RPC_LED_100_10 << RPC_LSXB_SHFT) )
wdenk8bf3b002003-12-06 23:20:41 +0000450#else
451/* SMSC reference design: LEDa --> green, LEDb --> yellow */
452#define RPC_DEFAULT ( RPC_SPEED | RPC_DPLX | RPC_ANEG \
453 | (RPC_LED_100_10 << RPC_LSXA_SHFT) \
454 | (RPC_LED_TX_RX << RPC_LSXB_SHFT) )
455#endif
wdenkfe8c2802002-11-03 00:38:21 +0000456
457/* Bank 0 0x000C is reserved */
458
459/* Bank Select Register */
460/* All Banks */
461#define BSR_REG 0x000E
462
463
464/* Configuration Reg */
465/* BANK 1 */
466#define CONFIG_REG 0x0000
467#define CONFIG_EXT_PHY 0x0200 /* 1=external MII, 0=internal Phy */
468#define CONFIG_GPCNTRL 0x0400 /* Inverse value drives pin nCNTRL */
469#define CONFIG_NO_WAIT 0x1000 /* When 1 no extra wait states on ISA bus */
470#define CONFIG_EPH_POWER_EN 0x8000 /* When 0 EPH is placed into low power mode. */
471
472/* Default is powered-up, Internal Phy, Wait States, and pin nCNTRL=low */
473#define CONFIG_DEFAULT (CONFIG_EPH_POWER_EN)
474
475
476/* Base Address Register */
477/* BANK 1 */
478#define BASE_REG 0x0002
479
480
481/* Individual Address Registers */
482/* BANK 1 */
483#define ADDR0_REG 0x0004
484#define ADDR1_REG 0x0006
485#define ADDR2_REG 0x0008
486
487
488/* General Purpose Register */
489/* BANK 1 */
490#define GP_REG 0x000A
491
492
493/* Control Register */
494/* BANK 1 */
495#define CTL_REG 0x000C
496#define CTL_RCV_BAD 0x4000 /* When 1 bad CRC packets are received */
497#define CTL_AUTO_RELEASE 0x0800 /* When 1 tx pages are released automatically */
498#define CTL_LE_ENABLE 0x0080 /* When 1 enables Link Error interrupt */
499#define CTL_CR_ENABLE 0x0040 /* When 1 enables Counter Rollover interrupt */
500#define CTL_TE_ENABLE 0x0020 /* When 1 enables Transmit Error interrupt */
501#define CTL_EEPROM_SELECT 0x0004 /* Controls EEPROM reload & store */
502#define CTL_RELOAD 0x0002 /* When set reads EEPROM into registers */
503#define CTL_STORE 0x0001 /* When set stores registers into EEPROM */
wdenk518e2e12004-03-25 14:59:05 +0000504#define CTL_DEFAULT (0x1A10) /* Autorelease enabled*/
wdenkfe8c2802002-11-03 00:38:21 +0000505
506/* MMU Command Register */
507/* BANK 2 */
508#define MMU_CMD_REG 0x0000
509#define MC_BUSY 1 /* When 1 the last release has not completed */
510#define MC_NOP (0<<5) /* No Op */
Wolfgang Denk53677ef2008-05-20 16:00:29 +0200511#define MC_ALLOC (1<<5) /* OR with number of 256 byte packets */
wdenkfe8c2802002-11-03 00:38:21 +0000512#define MC_RESET (2<<5) /* Reset MMU to initial state */
Wolfgang Denk53677ef2008-05-20 16:00:29 +0200513#define MC_REMOVE (3<<5) /* Remove the current rx packet */
514#define MC_RELEASE (4<<5) /* Remove and release the current rx packet */
515#define MC_FREEPKT (5<<5) /* Release packet in PNR register */
wdenkfe8c2802002-11-03 00:38:21 +0000516#define MC_ENQUEUE (6<<5) /* Enqueue the packet for transmit */
517#define MC_RSTTXFIFO (7<<5) /* Reset the TX FIFOs */
518
519
520/* Packet Number Register */
521/* BANK 2 */
522#define PN_REG 0x0002
523
524
525/* Allocation Result Register */
526/* BANK 2 */
527#define AR_REG 0x0003
528#define AR_FAILED 0x80 /* Alocation Failed */
529
530
531/* RX FIFO Ports Register */
532/* BANK 2 */
533#define RXFIFO_REG 0x0004 /* Must be read as a word */
534#define RXFIFO_REMPTY 0x8000 /* RX FIFO Empty */
535
536
537/* TX FIFO Ports Register */
538/* BANK 2 */
539#define TXFIFO_REG RXFIFO_REG /* Must be read as a word */
540#define TXFIFO_TEMPTY 0x80 /* TX FIFO Empty */
541
542
543/* Pointer Register */
544/* BANK 2 */
545#define PTR_REG 0x0006
546#define PTR_RCV 0x8000 /* 1=Receive area, 0=Transmit area */
Wolfgang Denk53677ef2008-05-20 16:00:29 +0200547#define PTR_AUTOINC 0x4000 /* Auto increment the pointer on each access */
wdenkfe8c2802002-11-03 00:38:21 +0000548#define PTR_READ 0x2000 /* When 1 the operation is a read */
wdenk518e2e12004-03-25 14:59:05 +0000549#define PTR_NOTEMPTY 0x0800 /* When 1 _do not_ write fifo DATA REG */
wdenkfe8c2802002-11-03 00:38:21 +0000550
551
552/* Data Register */
553/* BANK 2 */
554#define SMC91111_DATA_REG 0x0008
555
556
557/* Interrupt Status/Acknowledge Register */
558/* BANK 2 */
559#define SMC91111_INT_REG 0x000C
560
561
562/* Interrupt Mask Register */
563/* BANK 2 */
564#define IM_REG 0x000D
565#define IM_MDINT 0x80 /* PHY MI Register 18 Interrupt */
566#define IM_ERCV_INT 0x40 /* Early Receive Interrupt */
567#define IM_EPH_INT 0x20 /* Set by Etheret Protocol Handler section */
568#define IM_RX_OVRN_INT 0x10 /* Set by Receiver Overruns */
569#define IM_ALLOC_INT 0x08 /* Set when allocation request is completed */
570#define IM_TX_EMPTY_INT 0x04 /* Set if the TX FIFO goes empty */
571#define IM_TX_INT 0x02 /* Transmit Interrrupt */
572#define IM_RCV_INT 0x01 /* Receive Interrupt */
573
574
575/* Multicast Table Registers */
576/* BANK 3 */
577#define MCAST_REG1 0x0000
578#define MCAST_REG2 0x0002
579#define MCAST_REG3 0x0004
580#define MCAST_REG4 0x0006
581
582
583/* Management Interface Register (MII) */
584/* BANK 3 */
585#define MII_REG 0x0008
586#define MII_MSK_CRS100 0x4000 /* Disables CRS100 detection during tx half dup */
587#define MII_MDOE 0x0008 /* MII Output Enable */
588#define MII_MCLK 0x0004 /* MII Clock, pin MDCLK */
589#define MII_MDI 0x0002 /* MII Input, pin MDI */
590#define MII_MDO 0x0001 /* MII Output, pin MDO */
591
592
593/* Revision Register */
594/* BANK 3 */
595#define REV_REG 0x000A /* ( hi: chip id low: rev # ) */
596
597
598/* Early RCV Register */
599/* BANK 3 */
600/* this is NOT on SMC9192 */
601#define ERCV_REG 0x000C
602#define ERCV_RCV_DISCRD 0x0080 /* When 1 discards a packet being received */
603#define ERCV_THRESHOLD 0x001F /* ERCV Threshold Mask */
604
605/* External Register */
606/* BANK 7 */
607#define EXT_REG 0x0000
608
609
610#define CHIP_9192 3
611#define CHIP_9194 4
612#define CHIP_9195 5
613#define CHIP_9196 6
614#define CHIP_91100 7
615#define CHIP_91100FD 8
616#define CHIP_91111FD 9
617
618#if 0
619static const char * chip_ids[ 15 ] = {
620 NULL, NULL, NULL,
621 /* 3 */ "SMC91C90/91C92",
622 /* 4 */ "SMC91C94",
623 /* 5 */ "SMC91C95",
624 /* 6 */ "SMC91C96",
625 /* 7 */ "SMC91C100",
626 /* 8 */ "SMC91C100FD",
627 /* 9 */ "SMC91C111",
628 NULL, NULL,
629 NULL, NULL, NULL};
630#endif
631
632/*
633 . Transmit status bits
634*/
635#define TS_SUCCESS 0x0001
636#define TS_LOSTCAR 0x0400
637#define TS_LATCOL 0x0200
638#define TS_16COL 0x0010
639
640/*
641 . Receive status bits
642*/
643#define RS_ALGNERR 0x8000
644#define RS_BRODCAST 0x4000
645#define RS_BADCRC 0x2000
646#define RS_ODDFRAME 0x1000 /* bug: the LAN91C111 never sets this on receive */
647#define RS_TOOLONG 0x0800
648#define RS_TOOSHORT 0x0400
649#define RS_MULTICAST 0x0001
650#define RS_ERRORS (RS_ALGNERR | RS_BADCRC | RS_TOOLONG | RS_TOOSHORT)
651
652
653/* PHY Types */
654enum {
655 PHY_LAN83C183 = 1, /* LAN91C111 Internal PHY */
656 PHY_LAN83C180
657};
658
659
660/* PHY Register Addresses (LAN91C111 Internal PHY) */
661
662/* PHY Control Register */
663#define PHY_CNTL_REG 0x00
664#define PHY_CNTL_RST 0x8000 /* 1=PHY Reset */
665#define PHY_CNTL_LPBK 0x4000 /* 1=PHY Loopback */
666#define PHY_CNTL_SPEED 0x2000 /* 1=100Mbps, 0=10Mpbs */
667#define PHY_CNTL_ANEG_EN 0x1000 /* 1=Enable Auto negotiation */
668#define PHY_CNTL_PDN 0x0800 /* 1=PHY Power Down mode */
669#define PHY_CNTL_MII_DIS 0x0400 /* 1=MII 4 bit interface disabled */
670#define PHY_CNTL_ANEG_RST 0x0200 /* 1=Reset Auto negotiate */
671#define PHY_CNTL_DPLX 0x0100 /* 1=Full Duplex, 0=Half Duplex */
672#define PHY_CNTL_COLTST 0x0080 /* 1= MII Colision Test */
673
674/* PHY Status Register */
675#define PHY_STAT_REG 0x01
676#define PHY_STAT_CAP_T4 0x8000 /* 1=100Base-T4 capable */
677#define PHY_STAT_CAP_TXF 0x4000 /* 1=100Base-X full duplex capable */
678#define PHY_STAT_CAP_TXH 0x2000 /* 1=100Base-X half duplex capable */
679#define PHY_STAT_CAP_TF 0x1000 /* 1=10Mbps full duplex capable */
680#define PHY_STAT_CAP_TH 0x0800 /* 1=10Mbps half duplex capable */
681#define PHY_STAT_CAP_SUPR 0x0040 /* 1=recv mgmt frames with not preamble */
682#define PHY_STAT_ANEG_ACK 0x0020 /* 1=ANEG has completed */
683#define PHY_STAT_REM_FLT 0x0010 /* 1=Remote Fault detected */
684#define PHY_STAT_CAP_ANEG 0x0008 /* 1=Auto negotiate capable */
685#define PHY_STAT_LINK 0x0004 /* 1=valid link */
686#define PHY_STAT_JAB 0x0002 /* 1=10Mbps jabber condition */
687#define PHY_STAT_EXREG 0x0001 /* 1=extended registers implemented */
688
689/* PHY Identifier Registers */
690#define PHY_ID1_REG 0x02 /* PHY Identifier 1 */
691#define PHY_ID2_REG 0x03 /* PHY Identifier 2 */
692
693/* PHY Auto-Negotiation Advertisement Register */
694#define PHY_AD_REG 0x04
695#define PHY_AD_NP 0x8000 /* 1=PHY requests exchange of Next Page */
696#define PHY_AD_ACK 0x4000 /* 1=got link code word from remote */
697#define PHY_AD_RF 0x2000 /* 1=advertise remote fault */
698#define PHY_AD_T4 0x0200 /* 1=PHY is capable of 100Base-T4 */
699#define PHY_AD_TX_FDX 0x0100 /* 1=PHY is capable of 100Base-TX FDPLX */
700#define PHY_AD_TX_HDX 0x0080 /* 1=PHY is capable of 100Base-TX HDPLX */
701#define PHY_AD_10_FDX 0x0040 /* 1=PHY is capable of 10Base-T FDPLX */
702#define PHY_AD_10_HDX 0x0020 /* 1=PHY is capable of 10Base-T HDPLX */
703#define PHY_AD_CSMA 0x0001 /* 1=PHY is capable of 802.3 CMSA */
704
705/* PHY Auto-negotiation Remote End Capability Register */
706#define PHY_RMT_REG 0x05
707/* Uses same bit definitions as PHY_AD_REG */
708
709/* PHY Configuration Register 1 */
710#define PHY_CFG1_REG 0x10
711#define PHY_CFG1_LNKDIS 0x8000 /* 1=Rx Link Detect Function disabled */
712#define PHY_CFG1_XMTDIS 0x4000 /* 1=TP Transmitter Disabled */
713#define PHY_CFG1_XMTPDN 0x2000 /* 1=TP Transmitter Powered Down */
714#define PHY_CFG1_BYPSCR 0x0400 /* 1=Bypass scrambler/descrambler */
715#define PHY_CFG1_UNSCDS 0x0200 /* 1=Unscramble Idle Reception Disable */
716#define PHY_CFG1_EQLZR 0x0100 /* 1=Rx Equalizer Disabled */
717#define PHY_CFG1_CABLE 0x0080 /* 1=STP(150ohm), 0=UTP(100ohm) */
718#define PHY_CFG1_RLVL0 0x0040 /* 1=Rx Squelch level reduced by 4.5db */
719#define PHY_CFG1_TLVL_SHIFT 2 /* Transmit Output Level Adjust */
720#define PHY_CFG1_TLVL_MASK 0x003C
721#define PHY_CFG1_TRF_MASK 0x0003 /* Transmitter Rise/Fall time */
722
723
724/* PHY Configuration Register 2 */
725#define PHY_CFG2_REG 0x11
726#define PHY_CFG2_APOLDIS 0x0020 /* 1=Auto Polarity Correction disabled */
727#define PHY_CFG2_JABDIS 0x0010 /* 1=Jabber disabled */
728#define PHY_CFG2_MREG 0x0008 /* 1=Multiple register access (MII mgt) */
729#define PHY_CFG2_INTMDIO 0x0004 /* 1=Interrupt signaled with MDIO pulseo */
730
731/* PHY Status Output (and Interrupt status) Register */
732#define PHY_INT_REG 0x12 /* Status Output (Interrupt Status) */
733#define PHY_INT_INT 0x8000 /* 1=bits have changed since last read */
734#define PHY_INT_LNKFAIL 0x4000 /* 1=Link Not detected */
735#define PHY_INT_LOSSSYNC 0x2000 /* 1=Descrambler has lost sync */
736#define PHY_INT_CWRD 0x1000 /* 1=Invalid 4B5B code detected on rx */
737#define PHY_INT_SSD 0x0800 /* 1=No Start Of Stream detected on rx */
738#define PHY_INT_ESD 0x0400 /* 1=No End Of Stream detected on rx */
739#define PHY_INT_RPOL 0x0200 /* 1=Reverse Polarity detected */
740#define PHY_INT_JAB 0x0100 /* 1=Jabber detected */
741#define PHY_INT_SPDDET 0x0080 /* 1=100Base-TX mode, 0=10Base-T mode */
742#define PHY_INT_DPLXDET 0x0040 /* 1=Device in Full Duplex */
743
744/* PHY Interrupt/Status Mask Register */
745#define PHY_MASK_REG 0x13 /* Interrupt Mask */
746/* Uses the same bit definitions as PHY_INT_REG */
747
748
wdenkfe8c2802002-11-03 00:38:21 +0000749/*-------------------------------------------------------------------------
750 . I define some macros to make it easier to do somewhat common
751 . or slightly complicated, repeated tasks.
752 --------------------------------------------------------------------------*/
753
754/* select a register bank, 0 to 3 */
755
Ben Warren7194ab82009-10-04 22:37:03 -0700756#define SMC_SELECT_BANK(a,x) { SMC_outw((a), (x), BANK_SELECT ); }
wdenkfe8c2802002-11-03 00:38:21 +0000757
758/* this enables an interrupt in the interrupt mask register */
Ben Warren7194ab82009-10-04 22:37:03 -0700759#define SMC_ENABLE_INT(a,x) {\
wdenkfe8c2802002-11-03 00:38:21 +0000760 unsigned char mask;\
Ben Warren7194ab82009-10-04 22:37:03 -0700761 SMC_SELECT_BANK((a),2);\
762 mask = SMC_inb((a), IM_REG );\
wdenkfe8c2802002-11-03 00:38:21 +0000763 mask |= (x);\
Ben Warren7194ab82009-10-04 22:37:03 -0700764 SMC_outb( (a), mask, IM_REG ); \
wdenkfe8c2802002-11-03 00:38:21 +0000765}
766
767/* this disables an interrupt from the interrupt mask register */
768
Ben Warren7194ab82009-10-04 22:37:03 -0700769#define SMC_DISABLE_INT(a,x) {\
wdenkfe8c2802002-11-03 00:38:21 +0000770 unsigned char mask;\
771 SMC_SELECT_BANK(2);\
Ben Warren7194ab82009-10-04 22:37:03 -0700772 mask = SMC_inb( (a), IM_REG );\
wdenkfe8c2802002-11-03 00:38:21 +0000773 mask &= ~(x);\
Ben Warren7194ab82009-10-04 22:37:03 -0700774 SMC_outb( (a), mask, IM_REG ); \
wdenkfe8c2802002-11-03 00:38:21 +0000775}
776
777/*----------------------------------------------------------------------
778 . Define the interrupts that I want to receive from the card
779 .
780 . I want:
781 . IM_EPH_INT, for nasty errors
782 . IM_RCV_INT, for happy received packets
783 . IM_RX_OVRN_INT, because I have to kick the receiver
784 . IM_MDINT, for PHY Register 18 Status Changes
785 --------------------------------------------------------------------------*/
786#define SMC_INTERRUPT_MASK (IM_EPH_INT | IM_RX_OVRN_INT | IM_RCV_INT | \
787 IM_MDINT)
788
789#endif /* _SMC_91111_H_ */