blob: 4c580a37e317a2060c05deebc74665bcf48c2c89 [file] [log] [blame]
wdenk03f5c552004-10-10 21:21:55 +00001/*
Kumar Gala7c57f3e2011-01-11 00:52:35 -06002 * Copyright 2004, 2011 Freescale Semiconductor.
wdenk03f5c552004-10-10 21:21:55 +00003 *
4 * See file CREDITS for list of people who contributed to this
5 * project.
6 *
7 * This program is free software; you can redistribute it and/or
8 * modify it under the terms of the GNU General Public License as
9 * published by the Free Software Foundation; either version 2 of
10 * the License, or (at your option) any later version.
11 *
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
16 *
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
20 * MA 02111-1307 USA
21 */
22
23/*
24 * mpc8555cds board configuration file
25 *
26 * Please refer to doc/README.mpc85xxcds for more info.
27 *
28 */
wdenk03f5c552004-10-10 21:21:55 +000029#ifndef __CONFIG_H
30#define __CONFIG_H
31
32/* High Level Configuration Options */
33#define CONFIG_BOOKE 1 /* BOOKE */
34#define CONFIG_E500 1 /* BOOKE e500 family */
35#define CONFIG_MPC85xx 1 /* MPC8540/60/55/41 */
Jon Loeliger9c4c5ae2005-07-23 10:37:35 -050036#define CONFIG_CPM2 1 /* has CPM2 */
wdenk03f5c552004-10-10 21:21:55 +000037#define CONFIG_MPC8555 1 /* MPC8555 specific */
38#define CONFIG_MPC8555CDS 1 /* MPC8555CDS board specific */
39
Wolfgang Denk2ae18242010-10-06 09:05:45 +020040#define CONFIG_SYS_TEXT_BASE 0xfff80000
41
wdenk03f5c552004-10-10 21:21:55 +000042#define CONFIG_PCI
Kumar Gala0151cba2008-10-21 11:33:58 -050043#define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */
Wolfgang Denk53677ef2008-05-20 16:00:29 +020044#define CONFIG_TSEC_ENET /* tsec ethernet support */
wdenk03f5c552004-10-10 21:21:55 +000045#define CONFIG_ENV_OVERWRITE
Kumar Gala2cfaa1a2008-01-16 01:45:10 -060046#define CONFIG_FSL_LAW 1 /* Use common FSL init code */
wdenk03f5c552004-10-10 21:21:55 +000047
Jon Loeliger25eedb22008-03-19 15:02:07 -050048#define CONFIG_FSL_VIA
Timur Tabie8d18542008-07-18 16:52:23 +020049
Jon Loeliger25eedb22008-03-19 15:02:07 -050050
wdenk03f5c552004-10-10 21:21:55 +000051#ifndef __ASSEMBLY__
52extern unsigned long get_clock_freq(void);
53#endif
54#define CONFIG_SYS_CLK_FREQ get_clock_freq() /* sysclk for MPC85xx */
55
56/*
57 * These can be toggled for performance analysis, otherwise use default.
58 */
Wolfgang Denk53677ef2008-05-20 16:00:29 +020059#define CONFIG_L2_CACHE /* toggle L2 cache */
wdenk03f5c552004-10-10 21:21:55 +000060#define CONFIG_BTB /* toggle branch predition */
wdenk03f5c552004-10-10 21:21:55 +000061
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020062#define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */
63#define CONFIG_SYS_MEMTEST_END 0x00400000
wdenk03f5c552004-10-10 21:21:55 +000064
wdenk03f5c552004-10-10 21:21:55 +000065/*
66 * Base addresses -- Note these are effective addresses where the
67 * actual resources get mapped (not physical addresses)
68 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020069#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */
70#define CONFIG_SYS_CCSRBAR 0xe0000000 /* relocated CCSRBAR */
71#define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR /* physical addr of CCSRBAR */
72#define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */
wdenk03f5c552004-10-10 21:21:55 +000073
Jon Loeliger2b40edb2008-03-18 11:12:42 -050074/* DDR Setup */
75#define CONFIG_FSL_DDR1
76#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/
77#define CONFIG_DDR_SPD
78#undef CONFIG_FSL_DDR_INTERACTIVE
79
80#define CONFIG_MEM_INIT_VALUE 0xDeadBeef
81
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020082#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory*/
83#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
wdenk03f5c552004-10-10 21:21:55 +000084
Jon Loeliger2b40edb2008-03-18 11:12:42 -050085#define CONFIG_NUM_DDR_CONTROLLERS 1
86#define CONFIG_DIMM_SLOTS_PER_CTLR 1
87#define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR)
wdenk03f5c552004-10-10 21:21:55 +000088
Jon Loeliger2b40edb2008-03-18 11:12:42 -050089/* I2C addresses of SPD EEPROMs */
90#define SPD_EEPROM_ADDRESS 0x51 /* CTLR 0 DIMM 0 */
91
92/* Make sure required options are set */
wdenk03f5c552004-10-10 21:21:55 +000093#ifndef CONFIG_SPD_EEPROM
94#error ("CONFIG_SPD_EEPROM is required by MPC85555CDS")
95#endif
96
Jon Loeliger7202d432005-07-25 11:13:26 -050097#undef CONFIG_CLOCKS_IN_MHZ
98
wdenk03f5c552004-10-10 21:21:55 +000099/*
Jon Loeliger7202d432005-07-25 11:13:26 -0500100 * Local Bus Definitions
wdenk03f5c552004-10-10 21:21:55 +0000101 */
Jon Loeliger7202d432005-07-25 11:13:26 -0500102
103/*
104 * FLASH on the Local Bus
105 * Two banks, 8M each, using the CFI driver.
106 * Boot from BR0/OR0 bank at 0xff00_0000
107 * Alternate BR1/OR1 bank at 0xff80_0000
108 *
109 * BR0, BR1:
110 * Base address 0 = 0xff00_0000 = BR0[0:16] = 1111 1111 0000 0000 0
111 * Base address 1 = 0xff80_0000 = BR1[0:16] = 1111 1111 1000 0000 0
112 * Port Size = 16 bits = BRx[19:20] = 10
113 * Use GPCM = BRx[24:26] = 000
114 * Valid = BRx[31] = 1
115 *
116 * 0 4 8 12 16 20 24 28
117 * 1111 1111 1000 0000 0001 0000 0000 0001 = ff801001 BR0
118 * 1111 1111 0000 0000 0001 0000 0000 0001 = ff001001 BR1
119 *
120 * OR0, OR1:
121 * Addr Mask = 8M = ORx[0:16] = 1111 1111 1000 0000 0
122 * Reserved ORx[17:18] = 11, confusion here?
123 * CSNT = ORx[20] = 1
124 * ACS = half cycle delay = ORx[21:22] = 11
125 * SCY = 6 = ORx[24:27] = 0110
126 * TRLX = use relaxed timing = ORx[29] = 1
127 * EAD = use external address latch delay = OR[31] = 1
128 *
129 * 0 4 8 12 16 20 24 28
130 * 1111 1111 1000 0000 0110 1110 0110 0101 = ff806e65 ORx
131 */
132
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200133#define CONFIG_SYS_FLASH_BASE 0xff000000 /* start of FLASH 8M */
wdenk03f5c552004-10-10 21:21:55 +0000134
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200135#define CONFIG_SYS_BR0_PRELIM 0xff801001
136#define CONFIG_SYS_BR1_PRELIM 0xff001001
wdenk03f5c552004-10-10 21:21:55 +0000137
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200138#define CONFIG_SYS_OR0_PRELIM 0xff806e65
139#define CONFIG_SYS_OR1_PRELIM 0xff806e65
wdenk03f5c552004-10-10 21:21:55 +0000140
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200141#define CONFIG_SYS_FLASH_BANKS_LIST {0xff800000, CONFIG_SYS_FLASH_BASE}
142#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */
143#define CONFIG_SYS_MAX_FLASH_SECT 128 /* sectors per device */
144#undef CONFIG_SYS_FLASH_CHECKSUM
145#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
146#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
wdenk03f5c552004-10-10 21:21:55 +0000147
Wolfgang Denk14d0a022010-10-07 21:51:12 +0200148#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
wdenk03f5c552004-10-10 21:21:55 +0000149
Jean-Christophe PLAGNIOL-VILLARD00b18832008-08-13 01:40:42 +0200150#define CONFIG_FLASH_CFI_DRIVER
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200151#define CONFIG_SYS_FLASH_CFI
152#define CONFIG_SYS_FLASH_EMPTY_INFO
wdenk03f5c552004-10-10 21:21:55 +0000153
wdenk03f5c552004-10-10 21:21:55 +0000154
155/*
Jon Loeliger7202d432005-07-25 11:13:26 -0500156 * SDRAM on the Local Bus
wdenk03f5c552004-10-10 21:21:55 +0000157 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200158#define CONFIG_SYS_LBC_SDRAM_BASE 0xf0000000 /* Localbus SDRAM */
159#define CONFIG_SYS_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 64MB */
wdenk03f5c552004-10-10 21:21:55 +0000160
161/*
162 * Base Register 2 and Option Register 2 configure SDRAM.
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200163 * The SDRAM base address, CONFIG_SYS_LBC_SDRAM_BASE, is 0xf0000000.
wdenk03f5c552004-10-10 21:21:55 +0000164 *
165 * For BR2, need:
166 * Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0
167 * port-size = 32-bits = BR2[19:20] = 11
168 * no parity checking = BR2[21:22] = 00
169 * SDRAM for MSEL = BR2[24:26] = 011
170 * Valid = BR[31] = 1
171 *
172 * 0 4 8 12 16 20 24 28
173 * 1111 0000 0000 0000 0001 1000 0110 0001 = f0001861
174 *
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200175 * FIXME: CONFIG_SYS_LBC_SDRAM_BASE should be masked and OR'ed into
wdenk03f5c552004-10-10 21:21:55 +0000176 * FIXME: the top 17 bits of BR2.
177 */
178
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200179#define CONFIG_SYS_BR2_PRELIM 0xf0001861
wdenk03f5c552004-10-10 21:21:55 +0000180
181/*
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200182 * The SDRAM size in MB, CONFIG_SYS_LBC_SDRAM_SIZE, is 64.
wdenk03f5c552004-10-10 21:21:55 +0000183 *
184 * For OR2, need:
185 * 64MB mask for AM, OR2[0:7] = 1111 1100
186 * XAM, OR2[17:18] = 11
187 * 9 columns OR2[19-21] = 010
188 * 13 rows OR2[23-25] = 100
189 * EAD set for extra time OR[31] = 1
190 *
191 * 0 4 8 12 16 20 24 28
192 * 1111 1100 0000 0000 0110 1001 0000 0001 = fc006901
193 */
194
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200195#define CONFIG_SYS_OR2_PRELIM 0xfc006901
wdenk03f5c552004-10-10 21:21:55 +0000196
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200197#define CONFIG_SYS_LBC_LCRR 0x00030004 /* LB clock ratio reg */
198#define CONFIG_SYS_LBC_LBCR 0x00000000 /* LB config reg */
199#define CONFIG_SYS_LBC_LSRT 0x20000000 /* LB sdram refresh timer */
200#define CONFIG_SYS_LBC_MRTPR 0x00000000 /* LB refresh timer prescal*/
wdenk03f5c552004-10-10 21:21:55 +0000201
202/*
wdenk03f5c552004-10-10 21:21:55 +0000203 * Common settings for all Local Bus SDRAM commands.
204 * At run time, either BSMA1516 (for CPU 1.1)
205 * or BSMA1617 (for CPU 1.0) (old)
206 * is OR'ed in too.
207 */
Kumar Galab0fe93ed2009-03-26 01:34:38 -0500208#define CONFIG_SYS_LBC_LSDMR_COMMON ( LSDMR_RFCR16 \
209 | LSDMR_PRETOACT7 \
210 | LSDMR_ACTTORW7 \
211 | LSDMR_BL8 \
212 | LSDMR_WRC4 \
213 | LSDMR_CL3 \
214 | LSDMR_RFEN \
wdenk03f5c552004-10-10 21:21:55 +0000215 )
216
217/*
218 * The CADMUS registers are connected to CS3 on CDS.
219 * The new memory map places CADMUS at 0xf8000000.
220 *
221 * For BR3, need:
222 * Base address of 0xf8000000 = BR[0:16] = 1111 1000 0000 0000 0
223 * port-size = 8-bits = BR[19:20] = 01
224 * no parity checking = BR[21:22] = 00
225 * GPMC for MSEL = BR[24:26] = 000
226 * Valid = BR[31] = 1
227 *
228 * 0 4 8 12 16 20 24 28
229 * 1111 1000 0000 0000 0000 1000 0000 0001 = f8000801
230 *
231 * For OR3, need:
232 * 1 MB mask for AM, OR[0:16] = 1111 1111 1111 0000 0
233 * disable buffer ctrl OR[19] = 0
234 * CSNT OR[20] = 1
235 * ACS OR[21:22] = 11
236 * XACS OR[23] = 1
237 * SCY 15 wait states OR[24:27] = 1111 max is suboptimal but safe
238 * SETA OR[28] = 0
239 * TRLX OR[29] = 1
240 * EHTR OR[30] = 1
241 * EAD extra time OR[31] = 1
242 *
243 * 0 4 8 12 16 20 24 28
244 * 1111 1111 1111 0000 0000 1111 1111 0111 = fff00ff7
245 */
246
Jon Loeliger25eedb22008-03-19 15:02:07 -0500247#define CONFIG_FSL_CADMUS
248
wdenk03f5c552004-10-10 21:21:55 +0000249#define CADMUS_BASE_ADDR 0xf8000000
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200250#define CONFIG_SYS_BR3_PRELIM 0xf8000801
251#define CONFIG_SYS_OR3_PRELIM 0xfff00ff7
wdenk03f5c552004-10-10 21:21:55 +0000252
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200253#define CONFIG_SYS_INIT_RAM_LOCK 1
254#define CONFIG_SYS_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */
Wolfgang Denk553f0982010-10-26 13:32:32 +0200255#define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in RAM */
wdenk03f5c552004-10-10 21:21:55 +0000256
Wolfgang Denk25ddd1f2010-10-26 14:34:52 +0200257#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200258#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
wdenk03f5c552004-10-10 21:21:55 +0000259
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200260#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
261#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserved for malloc */
wdenk03f5c552004-10-10 21:21:55 +0000262
263/* Serial Port */
264#define CONFIG_CONS_INDEX 2
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200265#define CONFIG_SYS_NS16550
266#define CONFIG_SYS_NS16550_SERIAL
267#define CONFIG_SYS_NS16550_REG_SIZE 1
268#define CONFIG_SYS_NS16550_CLK get_bus_freq(0)
wdenk03f5c552004-10-10 21:21:55 +0000269
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200270#define CONFIG_SYS_BAUDRATE_TABLE \
wdenk03f5c552004-10-10 21:21:55 +0000271 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
272
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200273#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500)
274#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600)
wdenk03f5c552004-10-10 21:21:55 +0000275
276/* Use the HUSH parser */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200277#define CONFIG_SYS_HUSH_PARSER
278#ifdef CONFIG_SYS_HUSH_PARSER
279#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
wdenk03f5c552004-10-10 21:21:55 +0000280#endif
281
Matthew McClintock0e163872006-06-28 10:43:36 -0500282/* pass open firmware flat tree */
Kumar Galab90d2542007-11-29 00:11:44 -0600283#define CONFIG_OF_LIBFDT 1
284#define CONFIG_OF_BOARD_SETUP 1
285#define CONFIG_OF_STDOUT_VIA_ALIAS 1
Matthew McClintock0e163872006-06-28 10:43:36 -0500286
Jon Loeliger20476722006-10-20 15:50:15 -0500287/*
288 * I2C
289 */
290#define CONFIG_FSL_I2C /* Use FSL common I2C driver */
291#define CONFIG_HARD_I2C /* I2C with hardware support*/
wdenk03f5c552004-10-10 21:21:55 +0000292#undef CONFIG_SOFT_I2C /* I2C bit-banged */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200293#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
294#define CONFIG_SYS_I2C_SLAVE 0x7F
295#define CONFIG_SYS_I2C_NOPROBES {0x69} /* Don't probe these addrs */
296#define CONFIG_SYS_I2C_OFFSET 0x3000
wdenk03f5c552004-10-10 21:21:55 +0000297
Timur Tabie8d18542008-07-18 16:52:23 +0200298/* EEPROM */
299#define CONFIG_ID_EEPROM
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200300#define CONFIG_SYS_I2C_EEPROM_CCID
301#define CONFIG_SYS_ID_EEPROM
302#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57
303#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
Timur Tabie8d18542008-07-18 16:52:23 +0200304
wdenk03f5c552004-10-10 21:21:55 +0000305/*
306 * General PCI
307 * Addresses are mapped 1-1.
308 */
Kumar Gala5af0fdd2008-12-02 16:08:39 -0600309#define CONFIG_SYS_PCI1_MEM_VIRT 0x80000000
Kumar Gala10795f42008-12-02 16:08:36 -0600310#define CONFIG_SYS_PCI1_MEM_BUS 0x80000000
Kumar Gala5af0fdd2008-12-02 16:08:39 -0600311#define CONFIG_SYS_PCI1_MEM_PHYS 0x80000000
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200312#define CONFIG_SYS_PCI1_MEM_SIZE 0x20000000 /* 512M */
Kumar Galaaca5f012008-12-02 16:08:40 -0600313#define CONFIG_SYS_PCI1_IO_VIRT 0xe2000000
Kumar Gala5f91ef62008-12-02 16:08:37 -0600314#define CONFIG_SYS_PCI1_IO_BUS 0x00000000
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200315#define CONFIG_SYS_PCI1_IO_PHYS 0xe2000000
316#define CONFIG_SYS_PCI1_IO_SIZE 0x00100000 /* 1M */
wdenk03f5c552004-10-10 21:21:55 +0000317
Kumar Gala5af0fdd2008-12-02 16:08:39 -0600318#define CONFIG_SYS_PCI2_MEM_VIRT 0xa0000000
Kumar Gala10795f42008-12-02 16:08:36 -0600319#define CONFIG_SYS_PCI2_MEM_BUS 0xa0000000
Kumar Gala5af0fdd2008-12-02 16:08:39 -0600320#define CONFIG_SYS_PCI2_MEM_PHYS 0xa0000000
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200321#define CONFIG_SYS_PCI2_MEM_SIZE 0x20000000 /* 512M */
Kumar Galaaca5f012008-12-02 16:08:40 -0600322#define CONFIG_SYS_PCI2_IO_VIRT 0xe2100000
Kumar Gala5f91ef62008-12-02 16:08:37 -0600323#define CONFIG_SYS_PCI2_IO_BUS 0x00000000
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200324#define CONFIG_SYS_PCI2_IO_PHYS 0xe2100000
325#define CONFIG_SYS_PCI2_IO_SIZE 0x00100000 /* 1M */
wdenk03f5c552004-10-10 21:21:55 +0000326
Randy Vinson7f3f2bd2007-02-27 19:42:22 -0700327#ifdef CONFIG_LEGACY
328#define BRIDGE_ID 17
329#define VIA_ID 2
330#else
331#define BRIDGE_ID 28
332#define VIA_ID 4
333#endif
wdenk03f5c552004-10-10 21:21:55 +0000334
335#if defined(CONFIG_PCI)
336
337#define CONFIG_NET_MULTI
Wolfgang Denk53677ef2008-05-20 16:00:29 +0200338#define CONFIG_PCI_PNP /* do pci plug-and-play */
Matthew McClintockbf1dfff2006-06-28 10:46:13 -0500339#define CONFIG_MPC85XX_PCI2
wdenk03f5c552004-10-10 21:21:55 +0000340
341#undef CONFIG_EEPRO100
342#undef CONFIG_TULIP
343
Matthew McClintockbf1dfff2006-06-28 10:46:13 -0500344#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200345#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1057 /* Motorola */
wdenk03f5c552004-10-10 21:21:55 +0000346
347#endif /* CONFIG_PCI */
348
349
350#if defined(CONFIG_TSEC_ENET)
351
352#ifndef CONFIG_NET_MULTI
Wolfgang Denk53677ef2008-05-20 16:00:29 +0200353#define CONFIG_NET_MULTI 1
wdenk03f5c552004-10-10 21:21:55 +0000354#endif
355
356#define CONFIG_MII 1 /* MII PHY management */
Kim Phillips255a35772007-05-16 16:52:19 -0500357#define CONFIG_TSEC1 1
358#define CONFIG_TSEC1_NAME "TSEC0"
359#define CONFIG_TSEC2 1
360#define CONFIG_TSEC2_NAME "TSEC1"
wdenk03f5c552004-10-10 21:21:55 +0000361#define TSEC1_PHY_ADDR 0
362#define TSEC2_PHY_ADDR 1
wdenk03f5c552004-10-10 21:21:55 +0000363#define TSEC1_PHYIDX 0
364#define TSEC2_PHYIDX 0
Andy Fleming3a790132007-08-15 20:03:25 -0500365#define TSEC1_FLAGS TSEC_GIGABIT
366#define TSEC2_FLAGS TSEC_GIGABIT
Jon Loeligerd9b94f22005-07-25 14:05:07 -0500367
368/* Options are: TSEC[0-1] */
369#define CONFIG_ETHPRIME "TSEC0"
wdenk03f5c552004-10-10 21:21:55 +0000370
371#endif /* CONFIG_TSEC_ENET */
372
wdenk03f5c552004-10-10 21:21:55 +0000373/*
374 * Environment
375 */
Jean-Christophe PLAGNIOL-VILLARD5a1aceb2008-09-10 22:48:04 +0200376#define CONFIG_ENV_IS_IN_FLASH 1
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200377#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + 0x40000)
Jean-Christophe PLAGNIOL-VILLARD0e8d1582008-09-10 22:48:06 +0200378#define CONFIG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */
379#define CONFIG_ENV_SIZE 0x2000
wdenk03f5c552004-10-10 21:21:55 +0000380
381#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200382#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
wdenk03f5c552004-10-10 21:21:55 +0000383
Jon Loeliger2835e512007-06-13 13:22:08 -0500384/*
Jon Loeliger659e2f62007-07-10 09:10:49 -0500385 * BOOTP options
386 */
387#define CONFIG_BOOTP_BOOTFILESIZE
388#define CONFIG_BOOTP_BOOTPATH
389#define CONFIG_BOOTP_GATEWAY
390#define CONFIG_BOOTP_HOSTNAME
391
392
393/*
Jon Loeliger2835e512007-06-13 13:22:08 -0500394 * Command line configuration.
395 */
396#include <config_cmd_default.h>
397
398#define CONFIG_CMD_PING
399#define CONFIG_CMD_I2C
400#define CONFIG_CMD_MII
Kumar Gala82ac8c92007-12-07 12:04:30 -0600401#define CONFIG_CMD_ELF
Kumar Gala1c9aa762008-09-22 23:40:42 -0500402#define CONFIG_CMD_IRQ
403#define CONFIG_CMD_SETEXPR
Becky Bruce199e2622010-06-17 11:37:25 -0500404#define CONFIG_CMD_REGINFO
Jon Loeliger2835e512007-06-13 13:22:08 -0500405
wdenk03f5c552004-10-10 21:21:55 +0000406#if defined(CONFIG_PCI)
Jon Loeliger2835e512007-06-13 13:22:08 -0500407 #define CONFIG_CMD_PCI
wdenk03f5c552004-10-10 21:21:55 +0000408#endif
Jon Loeliger2835e512007-06-13 13:22:08 -0500409
wdenk03f5c552004-10-10 21:21:55 +0000410
411#undef CONFIG_WATCHDOG /* watchdog disabled */
412
413/*
414 * Miscellaneous configurable options
415 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200416#define CONFIG_SYS_LONGHELP /* undef to save memory */
Kim Phillips5be58f52010-07-14 19:47:18 -0500417#define CONFIG_CMDLINE_EDITING /* Command-line editing */
418#define CONFIG_AUTO_COMPLETE /* add autocompletion support */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200419#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
420#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
Jon Loeliger2835e512007-06-13 13:22:08 -0500421#if defined(CONFIG_CMD_KGDB)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200422#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
wdenk03f5c552004-10-10 21:21:55 +0000423#else
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200424#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
wdenk03f5c552004-10-10 21:21:55 +0000425#endif
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200426#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
427#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
428#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
429#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */
wdenk03f5c552004-10-10 21:21:55 +0000430
431/*
432 * For booting Linux, the board info and command line data
Kumar Galaa832ac42011-04-28 10:13:41 -0500433 * have to be in the first 64 MB of memory, since this is
wdenk03f5c552004-10-10 21:21:55 +0000434 * the maximum mapped by the Linux kernel during initialization.
435 */
Kumar Galaa832ac42011-04-28 10:13:41 -0500436#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux*/
437#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */
wdenk03f5c552004-10-10 21:21:55 +0000438
Jon Loeliger2835e512007-06-13 13:22:08 -0500439#if defined(CONFIG_CMD_KGDB)
wdenk03f5c552004-10-10 21:21:55 +0000440#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
441#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
442#endif
443
wdenk03f5c552004-10-10 21:21:55 +0000444/*
445 * Environment Configuration
446 */
447
448/* The mac addresses for all ethernet interface */
449#if defined(CONFIG_TSEC_ENET)
Andy Fleming10327dc2007-08-16 16:35:02 -0500450#define CONFIG_HAS_ETH0
wdenk03f5c552004-10-10 21:21:55 +0000451#define CONFIG_ETHADDR 00:E0:0C:00:00:FD
wdenke2ffd592004-12-31 09:32:47 +0000452#define CONFIG_HAS_ETH1
wdenk03f5c552004-10-10 21:21:55 +0000453#define CONFIG_ETH1ADDR 00:E0:0C:00:01:FD
wdenke2ffd592004-12-31 09:32:47 +0000454#define CONFIG_HAS_ETH2
wdenk03f5c552004-10-10 21:21:55 +0000455#define CONFIG_ETH2ADDR 00:E0:0C:00:02:FD
456#endif
457
458#define CONFIG_IPADDR 192.168.1.253
459
460#define CONFIG_HOSTNAME unknown
461#define CONFIG_ROOTPATH /nfsroot
462#define CONFIG_BOOTFILE your.uImage
463
464#define CONFIG_SERVERIP 192.168.1.1
465#define CONFIG_GATEWAYIP 192.168.1.1
466#define CONFIG_NETMASK 255.255.255.0
467
468#define CONFIG_LOADADDR 200000 /*default location for tftp and bootm*/
469
470#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */
471#undef CONFIG_BOOTARGS /* the boot command will set bootargs*/
472
473#define CONFIG_BAUDRATE 115200
474
475#define CONFIG_EXTRA_ENV_SETTINGS \
476 "netdev=eth0\0" \
477 "consoledev=ttyS1\0" \
Andy Fleming8272dc22006-09-13 10:33:35 -0500478 "ramdiskaddr=600000\0" \
479 "ramdiskfile=your.ramdisk.u-boot\0" \
480 "fdtaddr=400000\0" \
481 "fdtfile=your.fdt.dtb\0"
wdenk03f5c552004-10-10 21:21:55 +0000482
483#define CONFIG_NFSBOOTCOMMAND \
484 "setenv bootargs root=/dev/nfs rw " \
485 "nfsroot=$serverip:$rootpath " \
486 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
487 "console=$consoledev,$baudrate $othbootargs;" \
488 "tftp $loadaddr $bootfile;" \
Andy Fleming8272dc22006-09-13 10:33:35 -0500489 "tftp $fdtaddr $fdtfile;" \
490 "bootm $loadaddr - $fdtaddr"
wdenk03f5c552004-10-10 21:21:55 +0000491
492#define CONFIG_RAMBOOTCOMMAND \
493 "setenv bootargs root=/dev/ram rw " \
494 "console=$consoledev,$baudrate $othbootargs;" \
495 "tftp $ramdiskaddr $ramdiskfile;" \
496 "tftp $loadaddr $bootfile;" \
497 "bootm $loadaddr $ramdiskaddr"
498
499#define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND
500
wdenk03f5c552004-10-10 21:21:55 +0000501#endif /* __CONFIG_H */