blob: 80e5735e76c98a9601f3daf308b117e1dcac749e [file] [log] [blame]
Stefan Roesea8a11a92008-06-06 15:54:31 +02001/*
Detlev Zundelc8355b92009-09-02 17:24:57 +02002 * (C) Copyright 2008, 2009
Stefan Roesea8a11a92008-06-06 15:54:31 +02003 * Stefan Roese, DENX Software Engineering, sr@denx.de.
4 *
5 * Common configuration options for all AMCC boards
6 *
7 * This program is free software; you can redistribute it and/or
8 * modify it under the terms of the GNU General Public License as
9 * published by the Free Software Foundation; either version 2 of
10 * the License, or (at your option) any later version.
11 *
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
16 *
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
20 * MA 02111-1307 USA
21 */
22
23#ifndef __AMCC_COMMON_H
24#define __AMCC_COMMON_H
25
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020026#define CONFIG_SYS_SDRAM_BASE 0x00000000 /* _must_ be 0 */
Wolfgang Denk14d0a022010-10-07 21:51:12 +020027#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* Start of U-Boot */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020028#define CONFIG_SYS_MONITOR_LEN (0xFFFFFFFF - CONFIG_SYS_MONITOR_BASE + 1)
29#define CONFIG_SYS_MALLOC_LEN (1 << 20) /* Reserved for malloc */
Stefan Roesea8a11a92008-06-06 15:54:31 +020030
31/*
32 * UART
33 */
Stefan Roese550650d2010-09-20 16:05:31 +020034#define CONFIG_SYS_NS16550
35#define CONFIG_SYS_NS16550_SERIAL
36#define CONFIG_SYS_NS16550_REG_SIZE 1
37#define CONFIG_SYS_NS16550_CLK get_serial_clock()
38#define CONFIG_BAUDRATE 115200
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020039#define CONFIG_SYS_BAUDRATE_TABLE \
Stefan Roesea8a11a92008-06-06 15:54:31 +020040 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
41
42/*
43 * I2C
44 */
45#define CONFIG_HARD_I2C /* I2C with hardware support */
Stefan Roesed0b0dca2010-04-01 14:37:24 +020046#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020047#define CONFIG_SYS_I2C_SLAVE 0x7F
Stefan Roesea8a11a92008-06-06 15:54:31 +020048
49/*
50 * Ethernet/EMAC/PHY
51 */
Ben Warren96e21f82008-10-27 23:50:15 -070052#define CONFIG_PPC4xx_EMAC
Stefan Roesea8a11a92008-06-06 15:54:31 +020053#define CONFIG_MII /* MII PHY management */
Stefan Roesea8a11a92008-06-06 15:54:31 +020054#define CONFIG_NETCONSOLE /* include NetConsole support */
55#if defined(CONFIG_440)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020056#define CONFIG_SYS_RX_ETH_BUFFER 32 /* number of eth rx buffers */
Stefan Roesea8a11a92008-06-06 15:54:31 +020057#else
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020058#define CONFIG_SYS_RX_ETH_BUFFER 16 /* number of eth rx buffers */
Stefan Roesea8a11a92008-06-06 15:54:31 +020059#endif
60
61/*
62 * Commands
63 */
64#include <config_cmd_default.h>
65
66#define CONFIG_CMD_ASKENV
67#if defined(CONFIG_440)
68#define CONFIG_CMD_CACHE
69#endif
70#define CONFIG_CMD_DHCP
71#define CONFIG_CMD_DIAG
72#define CONFIG_CMD_EEPROM
73#define CONFIG_CMD_ELF
Wolfgang Denk3f9315c2013-03-23 23:50:38 +000074#define CONFIG_CMD_GREPENV
Stefan Roesea8a11a92008-06-06 15:54:31 +020075#define CONFIG_CMD_I2C
76#define CONFIG_CMD_IRQ
77#define CONFIG_CMD_MII
78#define CONFIG_CMD_NET
79#define CONFIG_CMD_NFS
80#define CONFIG_CMD_PING
81#define CONFIG_CMD_REGINFO
Wolfgang Denk3f9315c2013-03-23 23:50:38 +000082#define CONFIG_CMD_SETEXPR
Stefan Roesea8a11a92008-06-06 15:54:31 +020083
84/*
85 * Miscellaneous configurable options
86 */
87#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020088#define CONFIG_SYS_LONGHELP /* undef to save memory */
89#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
Stefan Roesea8a11a92008-06-06 15:54:31 +020090#if defined(CONFIG_CMD_KGDB)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020091#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
Stefan Roesea8a11a92008-06-06 15:54:31 +020092#else
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020093#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
Stefan Roesea8a11a92008-06-06 15:54:31 +020094#endif
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020095#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
96#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
97#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
Stefan Roesea8a11a92008-06-06 15:54:31 +020098
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020099#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */
100#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
Stefan Roesea8a11a92008-06-06 15:54:31 +0200101
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200102#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
103#define CONFIG_SYS_EXTBDINFO /* To use extended board_into (bd_t) */
Stefan Roesea8a11a92008-06-06 15:54:31 +0200104
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200105#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
Stefan Roesea8a11a92008-06-06 15:54:31 +0200106
107#define CONFIG_CMDLINE_EDITING /* add command line history */
108#define CONFIG_AUTO_COMPLETE /* add autocompletion support */
109#define CONFIG_LOOPW /* enable loopw command */
110#define CONFIG_MX_CYCLIC /* enable mdc/mwc commands */
111#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
112#define CONFIG_VERSION_VARIABLE /* include version env variable */
Wolfgang Denkc88840a2013-03-23 23:50:37 +0000113#define CONFIG_SYS_CONSOLE_INFO_QUIET /* don't print console @ startup*/
Stefan Roesea8a11a92008-06-06 15:54:31 +0200114
Wolfgang Denkc88840a2013-03-23 23:50:37 +0000115#define CONFIG_SYS_HUSH_PARSER /* Use the HUSH parser */
Stefan Roesea8a11a92008-06-06 15:54:31 +0200116
117#define CONFIG_LOADS_ECHO /* echo on for serial download */
Wolfgang Denkc88840a2013-03-23 23:50:37 +0000118#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */
Stefan Roesea8a11a92008-06-06 15:54:31 +0200119
Wolfgang Denk3f9315c2013-03-23 23:50:38 +0000120#define CONFIG_REGEX /* Enable regular expression support */
Stefan Roesea8a11a92008-06-06 15:54:31 +0200121/*
122 * BOOTP options
123 */
124#define CONFIG_BOOTP_BOOTFILESIZE
125#define CONFIG_BOOTP_BOOTPATH
126#define CONFIG_BOOTP_GATEWAY
127#define CONFIG_BOOTP_HOSTNAME
128#define CONFIG_BOOTP_SUBNETMASK
129
130/*
131 * For booting Linux, the board info and command line data
Stefan Roese6942efc2009-07-28 10:50:32 +0200132 * have to be in the first 16 MB of memory, since this is
133 * the maximum mapped by the 40x Linux kernel during initialization.
Stefan Roesea8a11a92008-06-06 15:54:31 +0200134 */
Stefan Roese6942efc2009-07-28 10:50:32 +0200135#define CONFIG_SYS_BOOTMAPSZ (16 << 20) /* Initial Memory map for Linux */
136#define CONFIG_SYS_BOOTM_LEN (16 << 20) /* Increase max gunzip size */
Stefan Roesea8a11a92008-06-06 15:54:31 +0200137
138/*
139 * Internal Definitions
140 */
141#if defined(CONFIG_CMD_KGDB)
142#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port*/
143#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
144#endif
145
146/*
147 * Pass open firmware flat tree
148 */
149#define CONFIG_OF_LIBFDT
150#define CONFIG_OF_BOARD_SETUP
Stefan Roese92b89642009-10-16 10:01:09 +0200151/* Update size in "reg" property of NOR FLASH device tree nodes */
152#define CONFIG_FDT_FIXUP_NOR_FLASH_SIZE
Stefan Roesea8a11a92008-06-06 15:54:31 +0200153
154/*
155 * Booting and default environment
156 */
157#define CONFIG_PREBOOT "echo;" \
158 "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
159 "echo"
160#define CONFIG_BOOTCOMMAND "run flash_self"
161
162/*
163 * Only very few boards have default console not on ttyS0 (like Taishan)
164 */
165#if !defined(CONFIG_USE_TTY)
166#define CONFIG_USE_TTY ttyS0
167#endif
168
169/*
Adam Grahamf09f09d2008-10-08 10:12:53 -0700170 * Only very few boards have default netdev not set to eth0 (like Arches)
171 */
172#if !defined(CONFIG_USE_NETDEV)
173#define CONFIG_USE_NETDEV eth0
174#endif
175
176/*
Stefan Roesea8a11a92008-06-06 15:54:31 +0200177 * Only some 4xx PPC's are equipped with an FPU
178 */
179#if defined(CONFIG_440EP) || defined(CONFIG_440EPX) || \
180 defined(CONFIG_460EX) || defined(CONFIG_460GT)
181#define CONFIG_AMCC_DEF_ENV_ROOTPATH "rootpath=/opt/eldk/ppc_4xxFP\0"
182#else
183#define CONFIG_AMCC_DEF_ENV_ROOTPATH "rootpath=/opt/eldk/ppc_4xx\0"
184#endif
185
186/*
187 * Only some boards need to extend the bootargs by some additional
188 * parameters (like Makalu)
189 */
190#if !defined(CONFIG_ADDMISC)
191#define CONFIG_ADDMISC "addmisc=setenv bootargs ${bootargs}\0"
192#endif
193
Stefan Roesea8a11a92008-06-06 15:54:31 +0200194/*
195 * General common environment variables shared on all AMCC eval boards
196 */
197#define CONFIG_AMCC_DEF_ENV \
Marek Vasut93ea89f2012-09-23 17:41:23 +0200198 "netdev=" __stringify(CONFIG_USE_NETDEV) "\0" \
Stefan Roesea8a11a92008-06-06 15:54:31 +0200199 "nfsargs=setenv bootargs root=/dev/nfs rw " \
200 "nfsroot=${serverip}:${rootpath}\0" \
201 "ramargs=setenv bootargs root=/dev/ram rw\0" \
202 "addip=setenv bootargs ${bootargs} " \
203 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
204 ":${hostname}:${netdev}:off panic=1\0" \
205 "addtty=setenv bootargs ${bootargs}" \
Marek Vasut93ea89f2012-09-23 17:41:23 +0200206 " console=" __stringify(CONFIG_USE_TTY) ",${baudrate}\0" \
Stefan Roesea8a11a92008-06-06 15:54:31 +0200207 CONFIG_ADDMISC \
208 "initrd_high=30000000\0" \
Stefan Roese27dd5f82009-07-28 10:56:03 +0200209 "kernel_addr_r=1000000\0" \
210 "fdt_addr_r=1800000\0" \
211 "ramdisk_addr_r=1900000\0" \
Marek Vasut93ea89f2012-09-23 17:41:23 +0200212 "hostname=" __stringify(CONFIG_HOSTNAME) "\0" \
213 "bootfile=" __stringify(CONFIG_HOSTNAME) "/uImage\0" \
214 "ramdisk_file=" __stringify(CONFIG_HOSTNAME) "/uRamdisk\0" \
Stefan Roesea8a11a92008-06-06 15:54:31 +0200215 CONFIG_AMCC_DEF_ENV_ROOTPATH
216
217/*
218 * Default environment for arch/powerpc booting
219 * for boards that are ported to arch/powerpc
220 */
221#define CONFIG_AMCC_DEF_ENV_POWERPC \
222 "flash_self=run ramargs addip addtty addmisc;" \
223 "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \
224 "flash_nfs=run nfsargs addip addtty addmisc;" \
225 "bootm ${kernel_addr} - ${fdt_addr}\0" \
226 "net_nfs=tftp ${kernel_addr_r} ${bootfile}; " \
227 "tftp ${fdt_addr_r} ${fdt_file}; " \
228 "run nfsargs addip addtty addmisc;" \
229 "bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \
Adam Grahamf09f09d2008-10-08 10:12:53 -0700230 "net_self_load=tftp ${kernel_addr_r} ${bootfile};" \
231 "tftp ${fdt_addr_r} ${fdt_file};" \
232 "tftp ${ramdisk_addr_r} ${ramdisk_file};\0" \
233 "net_self=run net_self_load;" \
234 "run ramargs addip addtty addmisc;" \
235 "bootm ${kernel_addr_r} ${ramdisk_addr_r} ${fdt_addr_r}\0" \
Marek Vasut93ea89f2012-09-23 17:41:23 +0200236 "fdt_file=" __stringify(CONFIG_HOSTNAME) "/" __stringify(CONFIG_HOSTNAME) ".dtb\0"
Stefan Roesea8a11a92008-06-06 15:54:31 +0200237
238/*
239 * Default environment for arch/ppc booting,
240 * for boards that are not ported to arch/powerpc yet
241 */
242#define CONFIG_AMCC_DEF_ENV_PPC \
243 "flash_self=run ramargs addip addtty addmisc;" \
244 "bootm ${kernel_addr} ${ramdisk_addr}\0" \
245 "flash_nfs=run nfsargs addip addtty addmisc;" \
246 "bootm ${kernel_addr}\0" \
247 "net_nfs=tftp ${kernel_addr_r} ${bootfile};" \
248 "run nfsargs addip addtty addmisc;" \
249 "bootm ${kernel_addr_r}\0"
250
251/*
252 * Default environment for arch/ppc booting (old version),
253 * for boards that are ported to arch/ppc and arch/powerpc
254 */
255#define CONFIG_AMCC_DEF_ENV_PPC_OLD \
256 "flash_self_old=run ramargs addip addtty addmisc;" \
257 "bootm ${kernel_addr} ${ramdisk_addr}\0" \
258 "flash_nfs_old=run nfsargs addip addtty addmisc;" \
259 "bootm ${kernel_addr}\0" \
260 "net_nfs_old=tftp ${kernel_addr_r} ${bootfile};" \
261 "run nfsargs addip addtty addmisc;" \
262 "bootm ${kernel_addr_r}\0"
263
264#define CONFIG_AMCC_DEF_ENV_NOR_UPD \
Marek Vasut93ea89f2012-09-23 17:41:23 +0200265 "u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.bin\0" \
Detlev Zundelc8355b92009-09-02 17:24:57 +0200266 "load=tftp 200000 ${u-boot}\0" \
Marek Vasut93ea89f2012-09-23 17:41:23 +0200267 "update=protect off " __stringify(CONFIG_SYS_MONITOR_BASE) " FFFFFFFF;" \
268 "era " __stringify(CONFIG_SYS_MONITOR_BASE) " FFFFFFFF;" \
269 "cp.b ${fileaddr} " __stringify(CONFIG_SYS_MONITOR_BASE) " ${filesize}\0" \
Stefan Roesea8a11a92008-06-06 15:54:31 +0200270 "upd=run load update\0" \
271
272#define CONFIG_AMCC_DEF_ENV_NAND_UPD \
Marek Vasut93ea89f2012-09-23 17:41:23 +0200273 "u-boot-nand=" __stringify(CONFIG_HOSTNAME) "/u-boot-nand.bin\0"\
Detlev Zundelc8355b92009-09-02 17:24:57 +0200274 "nload=tftp 200000 ${u-boot-nand}\0" \
Stefan Roeseacfbbb92010-10-15 08:41:01 +0200275 "nupdate=nand erase 0 100000;nand write 200000 0 100000\0" \
Stefan Roesea8a11a92008-06-06 15:54:31 +0200276 "nupd=run nload nupdate\0"
277
278#endif /* __AMCC_COMMON_H */