blob: 853cbde748627f134eaa8773d0c0f6a9ac973eac [file] [log] [blame]
wdenk682011f2003-06-03 23:54:09 +00001/*
2 * (C) Copyright 2000
3 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
4 *
5 * See file CREDITS for list of people who contributed to this
6 * project.
7 *
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License as
10 * published by the Free Software Foundation; either version 2 of
11 * the License, or (at your option) any later version.
12 *
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
21 * MA 02111-1307 USA
22 */
23
24/* Modified by Udi Finkelstein
25 *
26 * This file includes communication routines for SMC1 that can run even if
27 * SMC2 have already been initialized.
28 */
29
30#include <common.h>
31#include <watchdog.h>
32#include <commproc.h>
Jean-Christophe PLAGNIOL-VILLARD52cb4d42009-05-16 12:14:54 +020033#include <stdio_dev.h>
wdenk682011f2003-06-03 23:54:09 +000034#include <lcd.h>
35
Wolfgang Denkd87080b2006-03-31 18:32:53 +020036DECLARE_GLOBAL_DATA_PTR;
37
wdenk682011f2003-06-03 23:54:09 +000038#define SMC_INDEX 0
39#define PROFF_SMC PROFF_SMC1
40#define CPM_CR_CH_SMC CPM_CR_CH_SMC1
41
42#define RBC823_KBD_BAUDRATE 38400
43#define CPM_KEYBOARD_BASE 0x1000
44/*
45 * Minimal serial functions needed to use one of the SMC ports
46 * as serial console interface.
47 */
48
49void smc1_setbrg (void)
50{
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020051 volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
wdenk682011f2003-06-03 23:54:09 +000052 volatile cpm8xx_t *cp = &(im->im_cpm);
53
54 /* Set up the baud rate generator.
55 * See 8xx_io/commproc.c for details.
56 *
57 * Wire BRG2 to SMC1, BRG1 to SMC2
58 */
59
60 cp->cp_simode = 0x00001000;
61
62 cp->cp_brgc2 =
63 (((gd->cpu_clk / 16 / RBC823_KBD_BAUDRATE)-1) << 1) | CPM_BRG_EN;
64}
65
66int smc1_init (void)
67{
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020068 volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
wdenk682011f2003-06-03 23:54:09 +000069 volatile smc_t *sp;
70 volatile smc_uart_t *up;
71 volatile cbd_t *tbdf, *rbdf;
72 volatile cpm8xx_t *cp = &(im->im_cpm);
73 uint dpaddr;
74
75 /* initialize pointers to SMC */
76
77 sp = (smc_t *) &(cp->cp_smc[SMC_INDEX]);
78 up = (smc_uart_t *) &cp->cp_dparam[PROFF_SMC];
79
80 /* Disable transmitter/receiver.
81 */
82 sp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
83
84 /* Enable SDMA.
85 */
86 im->im_siu_conf.sc_sdcr = 1;
87
88 /* clear error conditions */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020089#ifdef CONFIG_SYS_SDSR
90 im->im_sdma.sdma_sdsr = CONFIG_SYS_SDSR;
wdenk682011f2003-06-03 23:54:09 +000091#else
92 im->im_sdma.sdma_sdsr = 0x83;
93#endif
94
95 /* clear SDMA interrupt mask */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020096#ifdef CONFIG_SYS_SDMR
97 im->im_sdma.sdma_sdmr = CONFIG_SYS_SDMR;
wdenk682011f2003-06-03 23:54:09 +000098#else
99 im->im_sdma.sdma_sdmr = 0x00;
100#endif
101
102 /* Use Port B for SMC1 instead of other functions.
103 */
104 cp->cp_pbpar |= 0x000000c0;
105 cp->cp_pbdir &= ~0x000000c0;
106 cp->cp_pbodr &= ~0x000000c0;
107
108 /* Set the physical address of the host memory buffers in
109 * the buffer descriptors.
110 */
111
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200112#ifdef CONFIG_SYS_ALLOC_DPRAM
wdenk682011f2003-06-03 23:54:09 +0000113 dpaddr = dpram_alloc_align (sizeof(cbd_t)*2 + 2, 8) ;
114#else
115 dpaddr = CPM_KEYBOARD_BASE ;
116#endif
117
118 /* Allocate space for two buffer descriptors in the DP ram.
119 * For now, this address seems OK, but it may have to
120 * change with newer versions of the firmware.
121 * damm: allocating space after the two buffers for rx/tx data
122 */
123
124 rbdf = (cbd_t *)&cp->cp_dpmem[dpaddr];
125 rbdf->cbd_bufaddr = (uint) (rbdf+2);
126 rbdf->cbd_sc = 0;
127 tbdf = rbdf + 1;
128 tbdf->cbd_bufaddr = ((uint) (rbdf+2)) + 1;
129 tbdf->cbd_sc = 0;
130
131 /* Set up the uart parameters in the parameter ram.
132 */
133 up->smc_rbase = dpaddr;
134 up->smc_tbase = dpaddr+sizeof(cbd_t);
135 up->smc_rfcr = SMC_EB;
136 up->smc_tfcr = SMC_EB;
137
138 /* Set UART mode, 8 bit, no parity, one stop.
139 * Enable receive and transmit.
140 */
141 sp->smc_smcmr = smcr_mk_clen(9) | SMCMR_SM_UART;
142
143 /* Mask all interrupts and remove anything pending.
144 */
145 sp->smc_smcm = 0;
146 sp->smc_smce = 0xff;
147
148 /* Set up the baud rate generator.
149 */
150 smc1_setbrg ();
151
152 /* Make the first buffer the only buffer.
153 */
154 tbdf->cbd_sc |= BD_SC_WRAP;
155 rbdf->cbd_sc |= BD_SC_EMPTY | BD_SC_WRAP;
156
157 /* Single character receive.
158 */
159 up->smc_mrblr = 1;
160 up->smc_maxidl = 0;
161
162 /* Initialize Tx/Rx parameters.
163 */
164
165 while (cp->cp_cpcr & CPM_CR_FLG) /* wait if cp is busy */
166 ;
167
168 cp->cp_cpcr = mk_cr_cmd(CPM_CR_CH_SMC, CPM_CR_INIT_TRX) | CPM_CR_FLG;
169
170 while (cp->cp_cpcr & CPM_CR_FLG) /* wait if cp is busy */
171 ;
172
173 /* Enable transmitter/receiver.
174 */
175 sp->smc_smcmr |= SMCMR_REN | SMCMR_TEN;
176
177 return (0);
178}
179
180void smc1_putc(const char c)
181{
182 volatile cbd_t *tbdf;
183 volatile char *buf;
184 volatile smc_uart_t *up;
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200185 volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
wdenk682011f2003-06-03 23:54:09 +0000186 volatile cpm8xx_t *cpmp = &(im->im_cpm);
187
188 up = (smc_uart_t *)&cpmp->cp_dparam[PROFF_SMC];
189
190 tbdf = (cbd_t *)&cpmp->cp_dpmem[up->smc_tbase];
191
192 /* Wait for last character to go.
193 */
194
195 buf = (char *)tbdf->cbd_bufaddr;
196
197 *buf = c;
198 tbdf->cbd_datlen = 1;
199 tbdf->cbd_sc |= BD_SC_READY;
200 __asm__("eieio");
201
202 while (tbdf->cbd_sc & BD_SC_READY) {
203 WATCHDOG_RESET ();
204 __asm__("eieio");
205 }
206}
207
208int smc1_getc(void)
209{
210 volatile cbd_t *rbdf;
211 volatile unsigned char *buf;
212 volatile smc_uart_t *up;
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200213 volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
wdenk682011f2003-06-03 23:54:09 +0000214 volatile cpm8xx_t *cpmp = &(im->im_cpm);
215 unsigned char c;
216
217 up = (smc_uart_t *)&cpmp->cp_dparam[PROFF_SMC];
218
219 rbdf = (cbd_t *)&cpmp->cp_dpmem[up->smc_rbase];
220
221 /* Wait for character to show up.
222 */
223 buf = (unsigned char *)rbdf->cbd_bufaddr;
224
225 while (rbdf->cbd_sc & BD_SC_EMPTY)
226 WATCHDOG_RESET ();
227
228 c = *buf;
229 rbdf->cbd_sc |= BD_SC_EMPTY;
230
231 return(c);
232}
233
234int smc1_tstc(void)
235{
236 volatile cbd_t *rbdf;
237 volatile smc_uart_t *up;
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200238 volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
wdenk682011f2003-06-03 23:54:09 +0000239 volatile cpm8xx_t *cpmp = &(im->im_cpm);
240
241 up = (smc_uart_t *)&cpmp->cp_dparam[PROFF_SMC];
242
243 rbdf = (cbd_t *)&cpmp->cp_dpmem[up->smc_rbase];
244
245 return(!(rbdf->cbd_sc & BD_SC_EMPTY));
246}
247
248/* search for keyboard and register it if found */
249int drv_keyboard_init(void)
250{
251 int error = 0;
Jean-Christophe PLAGNIOL-VILLARD52cb4d42009-05-16 12:14:54 +0200252 struct stdio_dev kbd_dev;
wdenk682011f2003-06-03 23:54:09 +0000253
254 if (0) {
255 /* register the keyboard */
Jean-Christophe PLAGNIOL-VILLARD52cb4d42009-05-16 12:14:54 +0200256 memset (&kbd_dev, 0, sizeof(struct stdio_dev));
wdenk682011f2003-06-03 23:54:09 +0000257 strcpy(kbd_dev.name, "kbd");
258 kbd_dev.flags = DEV_FLAGS_INPUT | DEV_FLAGS_SYSTEM;
259 kbd_dev.putc = NULL;
260 kbd_dev.puts = NULL;
261 kbd_dev.getc = smc1_getc;
262 kbd_dev.tstc = smc1_tstc;
Jean-Christophe PLAGNIOL-VILLARD52cb4d42009-05-16 12:14:54 +0200263 error = stdio_register (&kbd_dev);
wdenk682011f2003-06-03 23:54:09 +0000264 } else {
265 lcd_is_enabled = 0;
266 lcd_disable();
267 }
268 return error;
269}