blob: fe26de55c09df47d5d6cc7af3820b6fb6089ca34 [file] [log] [blame]
Shengzhou Liu8d67c362014-03-05 15:04:48 +08001T2080PCIe-RDB is a Freescale Reference Design Board that hosts the T2080 SoC.
2It can work in two mode: standalone mode and PCIe endpoint mode.
3
4T2080 SoC Overview
5------------------
6The T2080 QorIQ multicore processor combines four dual-threaded e6500 Power
7Architecture processor cores with high-performance datapath acceleration
8logic and network and peripheral bus interfaces required for networking,
9telecom/datacom, wireless infrastructure, and mil/aerospace applications.
10
11T2080 includes the following functions and features:
12 - Four dual-threads 64-bit Power architecture e6500 cores, up to 1.8GHz
13 - 2MB L2 cache and 512KB CoreNet platform cache (CPC)
14 - Hierarchical interconnect fabric
15 - One 32-/64-bit DDR3/3L SDRAM memory controllers with ECC and interleaving
16 - Data Path Acceleration Architecture (DPAA) incorporating acceleration
17 - 16 SerDes lanes up to 10.3125 GHz
18 - 8 Ethernet interfaces, supporting combinations of the following:
19 - Up to four 10 Gbps Ethernet MACs
20 - Up to eight 1 Gbps Ethernet MACs
21 - Up to four 2.5 Gbps Ethernet MACs
22 - High-speed peripheral interfaces
23 - Four PCI Express controllers (two PCIe 2.0 and two PCIe 3.0 with SR-IOV)
24 - Two Serial RapidIO 2.0 controllers/ports running at up to 5 GHz
25 - Additional peripheral interfaces
26 - Two serial ATA (SATA 2.0) controllers
27 - Two high-speed USB 2.0 controllers with integrated PHY
28 - Enhanced secure digital host controller (SD/SDHC/SDXC/eMMC)
29 - Enhanced serial peripheral interface (eSPI)
30 - Four I2C controllers
31 - Four 2-pin UARTs or two 4-pin UARTs
32 - Integrated Flash Controller supporting NAND and NOR flash
33 - Three eight-channel DMA engines
34 - Support for hardware virtualization and partitioning enforcement
35 - QorIQ Platform's Trust Architecture 2.0
36
37Differences between T2080 and T2081
38-----------------------------------
39 Feature T2080 T2081
40 1G Ethernet numbers: 8 6
41 10G Ethernet numbers: 4 2
42 SerDes lanes: 16 8
43 Serial RapidIO,RMan: 2 no
44 SATA Controller: 2 no
45 Aurora: yes no
46 SoC Package: 896-pins 780-pins
47
48
49T2080PCIe-RDB board Overview
50----------------------------
51 - SERDES Configuration
52 - SerDes-1 Lane A-B: to two 10G XFI fiber (MAC9 & MAC10)
53 - SerDes-1 Lane C-D: to two 10G Base-T (MAC1 & MAC2)
54 - SerDes-1 Lane E-H: to PCIe Goldfinger (PCIe4 x4, Gen3)
55 - SerDes-2 Lane A-D: to PCIe Slot (PCIe1 x4, Gen2)
56 - SerDes-2 Lane E-F: to C293 secure co-processor (PCIe2 x2)
57 - SerDes-2 Lane G-H: to SATA1 & SATA2
58 - Ethernet
59 - Two on-board 10M/100M/1G RGMII ethernet ports
60 - Two on-board 10Gbps XFI fiber ports
61 - Two on-board 10Gbps Base-T copper ports
62 - DDR Memory
63 - Supports 72bit 4GB DDR3-LP SODIMM
64 - PCIe
65 - One PCIe x4 gold-finger
66 - One PCIe x4 connector
67 - One PCIe x2 end-point device (C293 Crypto co-processor)
68 - IFC/Local Bus
69 - NOR: 128MB 16-bit NOR Flash
70 - NAND: 512MB 8-bit NAND flash
71 - CPLD: for system controlling with programable header on-board
72 - SATA
73 - Two SATA 2.0 onnectors on-board
74 - USB
75 - Supports two USB 2.0 ports with integrated PHYs
76 - Two type A ports with 5V@1.5A per port.
77 - SDHC
78 - one TF-card connector on-board
79 - SPI
80 - On-board 64MB SPI flash
81 - Other
82 - Two Serial ports
83 - Four I2C ports
84
85
86System Memory map
87-----------------
88Start Address End Address Description Size
890xF_FFDF_0000 0xF_FFDF_0FFF IFC - CPLD 4KB
900xF_FF80_0000 0xF_FF80_FFFF IFC - NAND Flash 64KB
910xF_FE00_0000 0xF_FEFF_FFFF CCSRBAR 16MB
920xF_F803_0000 0xF_F803_FFFF PCI Express 4 I/O Space 64KB
930xF_F802_0000 0xF_F802_FFFF PCI Express 3 I/O Space 64KB
940xF_F801_0000 0xF_F801_FFFF PCI Express 2 I/O Space 64KB
950xF_F800_0000 0xF_F800_FFFF PCI Express 1 I/O Space 64KB
960xF_F600_0000 0xF_F7FF_FFFF Queue manager software portal 32MB
970xF_F400_0000 0xF_F5FF_FFFF Buffer manager software portal 32MB
980xF_E800_0000 0xF_EFFF_FFFF IFC - NOR Flash 128MB
990xF_0000_0000 0xF_003F_FFFF DCSR 4MB
1000xC_4000_0000 0xC_4FFF_FFFF PCI Express 4 Mem Space 256MB
1010xC_3000_0000 0xC_3FFF_FFFF PCI Express 3 Mem Space 256MB
1020xC_2000_0000 0xC_2FFF_FFFF PCI Express 2 Mem Space 256MB
1030xC_0000_0000 0xC_1FFF_FFFF PCI Express 1 Mem Space 512MB
1040x0_0000_0000 0x0_ffff_ffff DDR 4GB
105
106
107128M NOR Flash memory Map
108-------------------------
109Start Address End Address Definition Max size
1100xEFF40000 0xEFFFFFFF u-boot (current bank) 768KB
1110xEFF20000 0xEFF3FFFF u-boot env (current bank) 128KB
1120xEFF00000 0xEFF1FFFF FMAN Ucode (current bank) 128KB
1130xEFE00000 0xEFE3FFFF PHY CS4315 firmware 256KB
1140xED300000 0xEFEFFFFF rootfs (alt bank) 44MB
1150xEC800000 0xEC8FFFFF Hardware device tree (alt bank) 1MB
1160xEC020000 0xEC7FFFFF Linux.uImage (alt bank) 7MB + 875KB
1170xEC000000 0xEC01FFFF RCW (alt bank) 128KB
1180xEBF40000 0xEBFFFFFF u-boot (alt bank) 768KB
1190xEBF20000 0xEBF3FFFF u-boot env (alt bank) 128KB
1200xEBF00000 0xEBF1FFFF FMAN ucode (alt bank) 128KB
1210xEBE00000 0xEBE3FFFF PHY CS4315 firmware (alt bank) 256KB
1220xE9300000 0xEBEFFFFF rootfs (current bank) 44MB
Shengzhou Liu4d666682014-04-18 16:43:40 +08001230xE8800000 0xE88FFFFF Hardware device tree (cur bank) 1MB
Shengzhou Liu8d67c362014-03-05 15:04:48 +08001240xE8020000 0xE86FFFFF Linux.uImage (current bank) 7MB + 875KB
1250xE8000000 0xE801FFFF RCW (current bank) 128KB
126
127
128T2080PCIe-RDB Ethernet Port Map
129-------------------------------
130Label In Uboot In Linux FMan Address Comments PHY
131ETH0 FM1@GTEC1 fm1-mac9 0xfe4f0000 10G SFP+ (CS4315)
132ETH1 FM1@GTEC2 fm1-mac10 0xfe4f2000 10G SFP+ (CS4315)
133ETH2 FM1@GTEC3 fm1-mac1 0xfe4e0000 10G Base-T (AQ1202)
134ETH3 FM1@GTEC4 fm1-mac2 0xfe4e2000 10G Base-T (AQ1202)
135ETH4 FM1@DTSEC3 fm1-mac3 0xfe4e4000 1G RGMII (RTL8211E)
136ETH5 FM1@DTSEC4 fm1-mac4 0xfe4e6000 1G RGMII (RTL8211E)
137
138
139T2080PCIe-RDB Default DIP-Switch setting
140----------------------------------------
141SW1[1:8] = '00010011'
142SW2[1:8] = '10111111'
143SW3[1:8] = '11100001'
144
145Software configurations and board settings
146------------------------------------------
1471. NOR boot:
148 a. build NOR boot image
Shengzhou Liu4d666682014-04-18 16:43:40 +0800149 $ make T2080RDB_config
150 $ make
Shengzhou Liu8d67c362014-03-05 15:04:48 +0800151 b. program u-boot.bin image to NOR flash
152 => tftp 1000000 u-boot.bin
153 => pro off all;era eff40000 efffffff;cp.b 1000000 eff40000 $filesize
154 set SW1[1:8] = '00010011', SW2[1] = '1', SW3[4] = '0' for NOR boot
155
156 Switching between default bank and alternate bank on NOR flash
157 To change boot source to vbank4:
158 via software: run command 'cpld reset altbank' in u-boot.
159 via DIP-switch: set SW3[5:7] = '011'
160
161 To change boot source to vbank0:
162 via software: run command 'cpld reset' in u-boot.
163 via DIP-Switch: set SW3[5:7] = '111'
164
1652. NAND Boot:
166 a. build PBL image for NAND boot
167 $ make T2080RDB_NAND_config
Shengzhou Liu4d666682014-04-18 16:43:40 +0800168 $ make
169 b. program u-boot-with-spl-pbl.bin to NAND flash
170 => tftp 1000000 u-boot-with-spl-pbl.bin
Shengzhou Liu8d67c362014-03-05 15:04:48 +0800171 => nand erase 0 d0000
172 => nand write 1000000 0 $filesize
173 set SW1[1:8] = '10000010', SW2[1] = '1', SW3[4] = '1' for NAND boot
174
1753. SPI Boot:
176 a. build PBL image for SPI boot
177 $ make T2080RDB_SPIFLASH_config
Shengzhou Liu4d666682014-04-18 16:43:40 +0800178 $ make
179 b. program u-boot-with-spl-pbl.bin to SPI flash
180 => tftp 1000000 u-boot-with-spl-pbl.bin
Shengzhou Liu8d67c362014-03-05 15:04:48 +0800181 => sf probe 0
182 => sf erase 0 d0000
183 => sf write 1000000 0 $filesize
184 set SW1[1:8] = '00100010', SW2[1] ='1' for SPI boot
185
1864. SD Boot:
187 a. build PBL image for SD boot
188 $ make T2080RDB_SDCARD_config
Shengzhou Liu4d666682014-04-18 16:43:40 +0800189 $ make
190 b. program u-boot-with-spl-pbl.bin to micro-SD/TF card
191 => tftp 1000000 u-boot-with-spl-pbl.bin
192 => mmc write 1000000 8 0x800
Shengzhou Liu8d67c362014-03-05 15:04:48 +0800193 set SW1[1:8] = '00100000', SW2[1] = '0' for SD boot
194
195
Shengzhou Liu4d666682014-04-18 16:43:40 +08001962-stage NAND/SPI/SD boot loader
197-------------------------------
198PBL initializes the internal CPC-SRAM and copy SPL(160K) to SRAM.
199SPL further initializes DDR using SPD and environment variables
200and copy u-boot(768 KB) from NAND/SPI/SD device to DDR.
201Finally SPL transers control to u-boot for futher booting.
202
203SPL has following features:
204 - Executes within 256K
205 - No relocation required
206
207Run time view of SPL framework
208-------------------------------------------------
209|Area | Address |
210-------------------------------------------------
211|SecureBoot header | 0xFFFC0000 (32KB) |
212-------------------------------------------------
213|GD, BD | 0xFFFC8000 (4KB) |
214-------------------------------------------------
215|ENV | 0xFFFC9000 (8KB) |
216-------------------------------------------------
217|HEAP | 0xFFFCB000 (50KB) |
218-------------------------------------------------
219|STACK | 0xFFFD8000 (22KB) |
220-------------------------------------------------
221|U-boot SPL | 0xFFFD8000 (160KB) |
222-------------------------------------------------
223
224NAND Flash memory Map on T2080RDB
225--------------------------------------------------------------
226Start End Definition Size
2270x000000 0x0FFFFF u-boot img 1MB (2 blocks)
2280x100000 0x17FFFF u-boot env 512KB (1 block)
2290x180000 0x1FFFFF FMAN ucode 512KB (1 block)
2300x200000 0x27FFFF CS4315 ucode 512KB (1 block)
231
232
233Micro SD Card memory Map on T2080RDB
234----------------------------------------------------
235Block #blocks Definition Size
2360x008 2048 u-boot img 1MB
2370x800 0016 u-boot env 8KB
2380x820 0128 FMAN ucode 64KB
2390x8a0 0512 CS4315 ucode 256KB
240
241
242SPI Flash memory Map on T2080RDB
243----------------------------------------------------
244Start End Definition Size
2450x000000 0x0FFFFF u-boot img 1MB
2460x100000 0x101FFF u-boot env 8KB
2470x110000 0x11FFFF FMAN ucode 64KB
2480x120000 0x15FFFF CS4315 ucode 256KB
249
250
Shengzhou Liu8d67c362014-03-05 15:04:48 +0800251How to update the ucode of Cortina CS4315/CS4340 10G PHY
252--------------------------------------------------------
253=> tftp 1000000 CS4315-CS4340-PHY-ucode.txt
254=> pro off all;era 0xefe00000 0xefefffff;cp.b 1000000 0xefe00000 $filesize
255
256
257How to update the ucode of Freescale FMAN
258-----------------------------------------
259=> tftp 1000000 fsl_fman_ucode_t2080_r1.0.bin
260=> pro off all;erase 0xeff00000 0xeff1ffff;cp 1000000 0xeff00000 $filesize
261
262
263For more details, please refer to T2080PCIe-RDB User Guide and access
264website www.freescale.com and Freescale QorIQ SDK Infocenter document.