blob: 367a232675aaca19818699c210628ea4845b7a8a [file] [log] [blame]
Tim Harvey2cb156e2022-02-11 10:48:56 -08001// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
Marcel Ziswiler4e5114d2022-07-21 15:43:37 +02003 * Copyright 2021 Gateworks Corporation
Tim Harvey2cb156e2022-02-11 10:48:56 -08004 */
5
6/dts-v1/;
7
8#include <dt-bindings/gpio/gpio.h>
9#include <dt-bindings/input/linux-event-codes.h>
10#include <dt-bindings/leds/common.h>
11#include <dt-bindings/net/ti-dp83867.h>
12
13#include "imx8mn.dtsi"
14
15/ {
16 model = "Gateworks Venice GW7902 i.MX8MN board";
17 compatible = "gw,imx8mn-gw7902", "fsl,imx8mn";
18
19 aliases {
20 usb0 = &usbotg1;
21 };
22
23 chosen {
24 stdout-path = &uart2;
25 };
26
27 memory@40000000 {
28 device_type = "memory";
29 reg = <0x0 0x40000000 0 0x80000000>;
30 };
31
32 can20m: can20m {
33 compatible = "fixed-clock";
34 #clock-cells = <0>;
35 clock-frequency = <20000000>;
36 clock-output-names = "can20m";
37 };
38
39 gpio-keys {
40 compatible = "gpio-keys";
41
42 user-pb {
43 label = "user_pb";
44 gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
45 linux,code = <BTN_0>;
46 };
47
48 user-pb1x {
49 label = "user_pb1x";
50 linux,code = <BTN_1>;
51 interrupt-parent = <&gsc>;
52 interrupts = <0>;
53 };
54
55 key-erased {
56 label = "key_erased";
57 linux,code = <BTN_2>;
58 interrupt-parent = <&gsc>;
59 interrupts = <1>;
60 };
61
62 eeprom-wp {
63 label = "eeprom_wp";
64 linux,code = <BTN_3>;
65 interrupt-parent = <&gsc>;
66 interrupts = <2>;
67 };
68
69 tamper {
70 label = "tamper";
71 linux,code = <BTN_4>;
72 interrupt-parent = <&gsc>;
73 interrupts = <5>;
74 };
75
76 switch-hold {
77 label = "switch_hold";
78 linux,code = <BTN_5>;
79 interrupt-parent = <&gsc>;
80 interrupts = <7>;
81 };
82 };
83
84 led-controller {
85 compatible = "gpio-leds";
86 pinctrl-names = "default";
87 pinctrl-0 = <&pinctrl_gpio_leds>;
88
89 led-0 {
90 function = LED_FUNCTION_STATUS;
91 color = <LED_COLOR_ID_GREEN>;
92 label = "panel1";
93 gpios = <&gpio3 21 GPIO_ACTIVE_LOW>;
94 default-state = "off";
95 };
96
97 led-1 {
98 function = LED_FUNCTION_STATUS;
99 color = <LED_COLOR_ID_GREEN>;
100 label = "panel2";
101 gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
102 default-state = "off";
103 };
104
105 led-2 {
106 function = LED_FUNCTION_STATUS;
107 color = <LED_COLOR_ID_GREEN>;
108 label = "panel3";
109 gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
110 default-state = "off";
111 };
112
113 led-3 {
114 function = LED_FUNCTION_STATUS;
115 color = <LED_COLOR_ID_GREEN>;
116 label = "panel4";
117 gpios = <&gpio3 20 GPIO_ACTIVE_LOW>;
118 default-state = "off";
119 };
120
121 led-4 {
122 function = LED_FUNCTION_STATUS;
123 color = <LED_COLOR_ID_GREEN>;
124 label = "panel5";
125 gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
126 default-state = "off";
127 };
128 };
129
130 pps {
131 compatible = "pps-gpio";
132 pinctrl-names = "default";
133 pinctrl-0 = <&pinctrl_pps>;
134 gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>;
135 status = "okay";
136 };
137
138 reg_3p3v: regulator-3p3v {
139 compatible = "regulator-fixed";
140 regulator-name = "3P3V";
141 regulator-min-microvolt = <3300000>;
142 regulator-max-microvolt = <3300000>;
Marcel Ziswiler4e5114d2022-07-21 15:43:37 +0200143 regulator-always-on;
Tim Harvey2cb156e2022-02-11 10:48:56 -0800144 };
145
146 reg_usb1_vbus: regulator-usb1 {
Marcel Ziswiler4e5114d2022-07-21 15:43:37 +0200147 compatible = "regulator-fixed";
Tim Harvey2cb156e2022-02-11 10:48:56 -0800148 pinctrl-names = "default";
149 pinctrl-0 = <&pinctrl_reg_usb1>;
Tim Harvey2cb156e2022-02-11 10:48:56 -0800150 regulator-name = "usb_usb1_vbus";
151 gpio = <&gpio2 7 GPIO_ACTIVE_HIGH>;
152 enable-active-high;
153 regulator-min-microvolt = <5000000>;
154 regulator-max-microvolt = <5000000>;
155 };
156
157 reg_wifi: regulator-wifi {
Marcel Ziswiler4e5114d2022-07-21 15:43:37 +0200158 compatible = "regulator-fixed";
Tim Harvey2cb156e2022-02-11 10:48:56 -0800159 pinctrl-names = "default";
160 pinctrl-0 = <&pinctrl_reg_wl>;
Tim Harvey2cb156e2022-02-11 10:48:56 -0800161 regulator-name = "wifi";
162 gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
163 enable-active-high;
164 startup-delay-us = <100>;
165 regulator-min-microvolt = <3300000>;
166 regulator-max-microvolt = <3300000>;
167 };
168};
169
170&A53_0 {
171 cpu-supply = <&buck2>;
172};
173
174&A53_1 {
175 cpu-supply = <&buck2>;
176};
177
178&A53_2 {
179 cpu-supply = <&buck2>;
180};
181
182&A53_3 {
183 cpu-supply = <&buck2>;
184};
185
186&ddrc {
187 operating-points-v2 = <&ddrc_opp_table>;
188
189 ddrc_opp_table: opp-table {
190 compatible = "operating-points-v2";
191
192 opp-25M {
193 opp-hz = /bits/ 64 <25000000>;
194 };
195
196 opp-100M {
197 opp-hz = /bits/ 64 <100000000>;
198 };
199
200 opp-750M {
201 opp-hz = /bits/ 64 <750000000>;
202 };
203 };
204};
205
206&ecspi1 {
207 pinctrl-names = "default";
208 pinctrl-0 = <&pinctrl_spi1>;
209 cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
210 status = "okay";
211
212 can@0 {
213 compatible = "microchip,mcp2515";
214 reg = <0>;
215 clocks = <&can20m>;
216 oscillator-frequency = <20000000>;
217 interrupt-parent = <&gpio2>;
218 interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
219 spi-max-frequency = <10000000>;
220 };
221};
222
Marcel Ziswiler4e5114d2022-07-21 15:43:37 +0200223&disp_blk_ctrl {
224 status = "disabled";
225};
226
Tim Harvey2cb156e2022-02-11 10:48:56 -0800227/* off-board header */
228&ecspi2 {
229 pinctrl-names = "default";
230 pinctrl-0 = <&pinctrl_spi2>;
231 cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
232 status = "okay";
233};
234
235&fec1 {
236 pinctrl-names = "default";
237 pinctrl-0 = <&pinctrl_fec1>;
238 phy-mode = "rgmii-id";
239 phy-handle = <&ethphy0>;
240 local-mac-address = [00 00 00 00 00 00];
241 status = "okay";
242
243 mdio {
244 #address-cells = <1>;
245 #size-cells = <0>;
246
247 ethphy0: ethernet-phy@0 {
248 compatible = "ethernet-phy-ieee802.3-c22";
249 reg = <0>;
250 ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
251 ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
252 tx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
253 rx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
254 };
255 };
256};
257
Marcel Ziswiler4e5114d2022-07-21 15:43:37 +0200258&gpio1 {
259 gpio-line-names = "", "", "", "", "", "", "", "",
260 "", "", "", "", "", "m2_reset", "", "m2_wdis#",
261 "", "", "", "", "", "", "", "",
262 "", "", "", "", "", "", "", "";
263};
264
265&gpio2 {
266 gpio-line-names = "", "", "", "", "", "", "", "",
267 "uart2_en#", "", "", "", "", "", "", "",
268 "", "", "", "", "", "", "", "",
269 "", "", "", "", "", "", "", "";
270};
271
272&gpio3 {
273 gpio-line-names = "", "m2_gdis#", "", "", "", "", "", "m2_off#",
274 "", "", "", "", "", "", "", "",
275 "", "", "", "", "", "", "", "",
276 "", "", "", "", "", "", "", "";
277};
278
279&gpio4 {
280 gpio-line-names = "", "", "", "", "", "", "", "",
281 "", "", "", "", "", "", "", "",
282 "", "", "", "", "", "app_gpio1", "", "uart1_rs485",
283 "", "uart1_term", "uart1_half", "app_gpio2",
284 "mipi_gpio1", "", "", "";
285};
286
287&gpio5 {
288 gpio-line-names = "", "", "", "mipi_gpio4",
289 "mipi_gpio3", "mipi_gpio2", "", "",
290 "", "", "", "", "", "", "", "",
291 "", "", "", "", "", "", "", "",
292 "", "", "", "", "", "", "", "";
293};
294
295&gpu {
296 status = "disabled";
297};
298
Tim Harvey2cb156e2022-02-11 10:48:56 -0800299&i2c1 {
300 clock-frequency = <100000>;
301 pinctrl-names = "default";
302 pinctrl-0 = <&pinctrl_i2c1>;
303 status = "okay";
304
305 gsc: gsc@20 {
306 compatible = "gw,gsc";
307 reg = <0x20>;
308 pinctrl-0 = <&pinctrl_gsc>;
309 interrupt-parent = <&gpio2>;
310 interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
311 interrupt-controller;
312 #interrupt-cells = <1>;
313
314 adc {
315 compatible = "gw,gsc-adc";
316 #address-cells = <1>;
317 #size-cells = <0>;
318
319 channel@6 {
320 gw,mode = <0>;
321 reg = <0x06>;
322 label = "temp";
323 };
324
325 channel@8 {
326 gw,mode = <1>;
327 reg = <0x08>;
328 label = "vdd_bat";
329 };
330
331 channel@82 {
332 gw,mode = <2>;
333 reg = <0x82>;
334 label = "vin";
335 gw,voltage-divider-ohms = <22100 1000>;
336 gw,voltage-offset-microvolt = <700000>;
337 };
338
339 channel@84 {
340 gw,mode = <2>;
341 reg = <0x84>;
342 label = "vin_4p0";
343 gw,voltage-divider-ohms = <10000 10000>;
344 };
345
346 channel@86 {
347 gw,mode = <2>;
348 reg = <0x86>;
349 label = "vdd_3p3";
350 gw,voltage-divider-ohms = <10000 10000>;
351 };
352
353 channel@88 {
354 gw,mode = <2>;
355 reg = <0x88>;
356 label = "vdd_0p9";
357 };
358
359 channel@8c {
360 gw,mode = <2>;
361 reg = <0x8c>;
362 label = "vdd_soc";
363 };
364
365 channel@8e {
366 gw,mode = <2>;
367 reg = <0x8e>;
368 label = "vdd_arm";
369 };
370
371 channel@90 {
372 gw,mode = <2>;
373 reg = <0x90>;
374 label = "vdd_1p8";
375 };
376
377 channel@92 {
378 gw,mode = <2>;
379 reg = <0x92>;
380 label = "vdd_dram";
381 };
382
383 channel@98 {
384 gw,mode = <2>;
385 reg = <0x98>;
386 label = "vdd_1p0";
387 };
388
389 channel@9a {
390 gw,mode = <2>;
391 reg = <0x9a>;
392 label = "vdd_2p5";
393 gw,voltage-divider-ohms = <10000 10000>;
394 };
395
Tim Harvey0f42ffd2022-03-08 10:44:43 -0800396 channel@9c {
397 gw,mode = <2>;
398 reg = <0x9c>;
399 label = "vdd_5p0";
400 gw,voltage-divider-ohms = <10000 10000>;
401 };
402
Tim Harvey2cb156e2022-02-11 10:48:56 -0800403 channel@a2 {
404 gw,mode = <2>;
405 reg = <0xa2>;
406 label = "vdd_gsc";
407 gw,voltage-divider-ohms = <10000 10000>;
408 };
409 };
410 };
411
412 gpio: gpio@23 {
413 compatible = "nxp,pca9555";
414 reg = <0x23>;
415 gpio-controller;
416 #gpio-cells = <2>;
417 interrupt-parent = <&gsc>;
418 interrupts = <4>;
419 };
420
421 pmic@4b {
422 compatible = "rohm,bd71847";
423 reg = <0x4b>;
424 pinctrl-names = "default";
425 pinctrl-0 = <&pinctrl_pmic>;
426 interrupt-parent = <&gpio3>;
427 interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
428 rohm,reset-snvs-powered;
429 #clock-cells = <0>;
430 clocks = <&osc_32k 0>;
431 clock-output-names = "clk-32k-out";
432
433 regulators {
434 /* vdd_soc: 0.805-0.900V (typ=0.8V) */
435 BUCK1 {
436 regulator-name = "buck1";
437 regulator-min-microvolt = <700000>;
438 regulator-max-microvolt = <1300000>;
439 regulator-boot-on;
440 regulator-always-on;
441 regulator-ramp-delay = <1250>;
442 };
443
444 /* vdd_arm: 0.805-1.0V (typ=0.9V) */
445 buck2: BUCK2 {
446 regulator-name = "buck2";
447 regulator-min-microvolt = <700000>;
448 regulator-max-microvolt = <1300000>;
449 regulator-boot-on;
450 regulator-always-on;
451 regulator-ramp-delay = <1250>;
452 rohm,dvs-run-voltage = <1000000>;
453 rohm,dvs-idle-voltage = <900000>;
454 };
455
456 /* vdd_0p9: 0.805-1.0V (typ=0.9V) */
457 BUCK3 {
458 regulator-name = "buck3";
459 regulator-min-microvolt = <700000>;
460 regulator-max-microvolt = <1350000>;
461 regulator-boot-on;
462 regulator-always-on;
463 };
464
465 /* vdd_3p3 */
466 BUCK4 {
467 regulator-name = "buck4";
468 regulator-min-microvolt = <3000000>;
469 regulator-max-microvolt = <3300000>;
470 regulator-boot-on;
471 regulator-always-on;
472 };
473
474 /* vdd_1p8 */
475 BUCK5 {
476 regulator-name = "buck5";
477 regulator-min-microvolt = <1605000>;
478 regulator-max-microvolt = <1995000>;
479 regulator-boot-on;
480 regulator-always-on;
481 };
482
483 /* vdd_dram */
484 BUCK6 {
485 regulator-name = "buck6";
486 regulator-min-microvolt = <800000>;
487 regulator-max-microvolt = <1400000>;
488 regulator-boot-on;
489 regulator-always-on;
490 };
491
492 /* nvcc_snvs_1p8 */
493 LDO1 {
494 regulator-name = "ldo1";
495 regulator-min-microvolt = <1600000>;
496 regulator-max-microvolt = <1900000>;
497 regulator-boot-on;
498 regulator-always-on;
499 };
500
501 /* vdd_snvs_0p8 */
502 LDO2 {
503 regulator-name = "ldo2";
504 regulator-min-microvolt = <800000>;
505 regulator-max-microvolt = <900000>;
506 regulator-boot-on;
507 regulator-always-on;
508 };
509
510 /* vdda_1p8 */
511 LDO3 {
512 regulator-name = "ldo3";
513 regulator-min-microvolt = <1800000>;
514 regulator-max-microvolt = <3300000>;
515 regulator-boot-on;
516 regulator-always-on;
517 };
518
519 LDO4 {
520 regulator-name = "ldo4";
521 regulator-min-microvolt = <900000>;
522 regulator-max-microvolt = <1800000>;
523 regulator-boot-on;
524 regulator-always-on;
525 };
526
527 LDO6 {
528 regulator-name = "ldo6";
529 regulator-min-microvolt = <900000>;
530 regulator-max-microvolt = <1800000>;
531 regulator-boot-on;
532 regulator-always-on;
533 };
534 };
535 };
536
537 eeprom@50 {
538 compatible = "atmel,24c02";
539 reg = <0x50>;
540 pagesize = <16>;
541 };
542
543 eeprom@51 {
544 compatible = "atmel,24c02";
545 reg = <0x51>;
546 pagesize = <16>;
547 };
548
549 eeprom@52 {
550 compatible = "atmel,24c02";
551 reg = <0x52>;
552 pagesize = <16>;
553 };
554
555 eeprom@53 {
556 compatible = "atmel,24c02";
557 reg = <0x53>;
558 pagesize = <16>;
559 };
560
561 rtc@68 {
562 compatible = "dallas,ds1672";
563 reg = <0x68>;
564 };
565};
566
567&i2c2 {
568 clock-frequency = <400000>;
569 pinctrl-names = "default";
570 pinctrl-0 = <&pinctrl_i2c2>;
571 status = "okay";
572
573 accelerometer@19 {
Marcel Ziswiler4e5114d2022-07-21 15:43:37 +0200574 compatible = "st,lis2de12";
Tim Harvey2cb156e2022-02-11 10:48:56 -0800575 pinctrl-names = "default";
576 pinctrl-0 = <&pinctrl_accel>;
Tim Harvey2cb156e2022-02-11 10:48:56 -0800577 reg = <0x19>;
578 st,drdy-int-pin = <1>;
579 interrupt-parent = <&gpio1>;
580 interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
581 interrupt-names = "INT1";
582 };
Tim Harvey2cb156e2022-02-11 10:48:56 -0800583};
584
585/* off-board header */
586&i2c3 {
587 clock-frequency = <400000>;
588 pinctrl-names = "default";
589 pinctrl-0 = <&pinctrl_i2c3>;
590 status = "okay";
591};
592
593/* off-board header */
594&i2c4 {
595 clock-frequency = <400000>;
596 pinctrl-names = "default";
597 pinctrl-0 = <&pinctrl_i2c4>;
598 status = "okay";
599};
600
Marcel Ziswiler4e5114d2022-07-21 15:43:37 +0200601&pgc_gpumix {
602 status = "disabled";
603};
604
Tim Harvey2cb156e2022-02-11 10:48:56 -0800605/* off-board header */
606&sai3 {
607 pinctrl-names = "default";
608 pinctrl-0 = <&pinctrl_sai3>;
609 assigned-clocks = <&clk IMX8MN_CLK_SAI3>;
610 assigned-clock-parents = <&clk IMX8MN_AUDIO_PLL1_OUT>;
611 assigned-clock-rates = <24576000>;
612 status = "okay";
613};
614
615/* RS232/RS485/RS422 selectable */
616&uart1 {
617 pinctrl-names = "default";
618 pinctrl-0 = <&pinctrl_uart1>, <&pinctrl_uart1_gpio>;
619 status = "okay";
620};
621
622/* RS232 console */
623&uart2 {
624 pinctrl-names = "default";
625 pinctrl-0 = <&pinctrl_uart2>;
626 status = "okay";
627};
628
629/* bluetooth HCI */
630&uart3 {
631 pinctrl-names = "default";
632 pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_uart3_gpio>;
633 rts-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
634 cts-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
Marcel Ziswiler4e5114d2022-07-21 15:43:37 +0200635 uart-has-rtscts;
Tim Harvey2cb156e2022-02-11 10:48:56 -0800636 status = "okay";
637
638 bluetooth {
639 compatible = "brcm,bcm4330-bt";
640 shutdown-gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
641 };
642};
643
644/* LTE Cat M1/NB1/EGPRS modem or GPS (loading option) */
645&uart4 {
646 pinctrl-names = "default";
647 pinctrl-0 = <&pinctrl_uart4>;
648 status = "okay";
649};
650
651&usbotg1 {
652 dr_mode = "host";
653 vbus-supply = <&reg_usb1_vbus>;
654 disable-over-current;
655 status = "okay";
656};
657
658/* SDIO WiFi */
659&usdhc2 {
660 pinctrl-names = "default";
661 pinctrl-0 = <&pinctrl_usdhc2>;
662 bus-width = <4>;
663 non-removable;
664 vmmc-supply = <&reg_wifi>;
665 status = "okay";
666};
667
668/* eMMC */
669&usdhc3 {
670 pinctrl-names = "default", "state_100mhz", "state_200mhz";
671 pinctrl-0 = <&pinctrl_usdhc3>;
672 pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
673 pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
674 bus-width = <8>;
675 non-removable;
676 status = "okay";
677};
678
679&wdog1 {
680 pinctrl-names = "default";
681 pinctrl-0 = <&pinctrl_wdog>;
682 fsl,ext-reset-output;
683 status = "okay";
684};
685
686&iomuxc {
687 pinctrl-names = "default";
688 pinctrl-0 = <&pinctrl_hog>;
689
690 pinctrl_hog: hoggrp {
691 fsl,pins = <
692 MX8MN_IOMUXC_NAND_CE0_B_GPIO3_IO1 0x40000159 /* M2_GDIS# */
Marcel Ziswiler4e5114d2022-07-21 15:43:37 +0200693 MX8MN_IOMUXC_GPIO1_IO13_GPIO1_IO13 0x40000041 /* M2_RESET */
Tim Harvey2cb156e2022-02-11 10:48:56 -0800694 MX8MN_IOMUXC_NAND_DATA01_GPIO3_IO7 0x40000119 /* M2_OFF# */
695 MX8MN_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x40000159 /* M2_WDIS# */
696 MX8MN_IOMUXC_SAI2_RXFS_GPIO4_IO21 0x40000041 /* APP GPIO1 */
697 MX8MN_IOMUXC_SAI2_MCLK_GPIO4_IO27 0x40000041 /* APP GPIO2 */
698 MX8MN_IOMUXC_SD1_DATA6_GPIO2_IO8 0x40000041 /* UART2_EN# */
699 MX8MN_IOMUXC_SAI3_RXFS_GPIO4_IO28 0x40000041 /* MIPI_GPIO1 */
700 MX8MN_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5 0x40000041 /* MIPI_GPIO2 */
701 MX8MN_IOMUXC_SPDIF_RX_GPIO5_IO4 0x40000041 /* MIPI_GPIO3/PWM2 */
702 MX8MN_IOMUXC_SPDIF_TX_GPIO5_IO3 0x40000041 /* MIPI_GPIO4/PWM3 */
703 >;
704 };
705
706 pinctrl_accel: accelgrp {
707 fsl,pins = <
708 MX8MN_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x159
709 >;
710 };
711
712 pinctrl_fec1: fec1grp {
713 fsl,pins = <
714 MX8MN_IOMUXC_ENET_MDC_ENET1_MDC 0x3
715 MX8MN_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3
716 MX8MN_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f
717 MX8MN_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f
718 MX8MN_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f
719 MX8MN_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f
720 MX8MN_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91
721 MX8MN_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91
722 MX8MN_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91
723 MX8MN_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91
724 MX8MN_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f
725 MX8MN_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91
726 MX8MN_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91
727 MX8MN_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f
728 MX8MN_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x19 /* RST# */
729 MX8MN_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x19 /* IRQ# */
730 MX8MN_IOMUXC_GPIO1_IO08_ENET1_1588_EVENT0_IN 0x141
731 MX8MN_IOMUXC_GPIO1_IO09_ENET1_1588_EVENT0_OUT 0x141
732 >;
733 };
734
735 pinctrl_gsc: gscgrp {
736 fsl,pins = <
737 MX8MN_IOMUXC_SD1_DATA4_GPIO2_IO6 0x40
738 >;
739 };
740
741 pinctrl_i2c1: i2c1grp {
742 fsl,pins = <
743 MX8MN_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3
744 MX8MN_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3
745 >;
746 };
747
748 pinctrl_i2c2: i2c2grp {
749 fsl,pins = <
750 MX8MN_IOMUXC_I2C2_SCL_I2C2_SCL 0x400001c3
751 MX8MN_IOMUXC_I2C2_SDA_I2C2_SDA 0x400001c3
752 >;
753 };
754
755 pinctrl_i2c3: i2c3grp {
756 fsl,pins = <
757 MX8MN_IOMUXC_I2C3_SCL_I2C3_SCL 0x400001c3
758 MX8MN_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001c3
759 >;
760 };
761
762 pinctrl_i2c4: i2c4grp {
763 fsl,pins = <
764 MX8MN_IOMUXC_I2C4_SCL_I2C4_SCL 0x400001c3
765 MX8MN_IOMUXC_I2C4_SDA_I2C4_SDA 0x400001c3
766 >;
767 };
768
769 pinctrl_gpio_leds: gpioledgrp {
770 fsl,pins = <
Marcel Ziswiler4e5114d2022-07-21 15:43:37 +0200771 MX8MN_IOMUXC_SAI5_RXD0_GPIO3_IO21 0x19
772 MX8MN_IOMUXC_SAI5_RXD2_GPIO3_IO23 0x19
773 MX8MN_IOMUXC_SAI5_RXD1_GPIO3_IO22 0x19
774 MX8MN_IOMUXC_SAI5_RXC_GPIO3_IO20 0x19
775 MX8MN_IOMUXC_SAI5_MCLK_GPIO3_IO25 0x19
Tim Harvey2cb156e2022-02-11 10:48:56 -0800776 >;
777 };
778
779 pinctrl_pmic: pmicgrp {
780 fsl,pins = <
781 MX8MN_IOMUXC_NAND_DATA02_GPIO3_IO8 0x41
782 >;
783 };
784
785 pinctrl_pps: ppsgrp {
786 fsl,pins = <
787 MX8MN_IOMUXC_SAI5_RXD3_GPIO3_IO24 0x141 /* PPS */
788 >;
789 };
790
791 pinctrl_reg_wl: regwlgrp {
792 fsl,pins = <
793 MX8MN_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41 /* WLAN_WLON */
794 >;
795 };
796
797 pinctrl_reg_usb1: regusb1grp {
798 fsl,pins = <
799 MX8MN_IOMUXC_SD1_DATA5_GPIO2_IO7 0x41
800 >;
801 };
802
803 pinctrl_sai3: sai3grp {
804 fsl,pins = <
805 MX8MN_IOMUXC_SAI3_MCLK_SAI3_MCLK 0xd6
806 MX8MN_IOMUXC_SAI3_RXD_SAI3_RX_DATA0 0xd6
807 MX8MN_IOMUXC_SAI3_TXC_SAI3_TX_BCLK 0xd6
808 MX8MN_IOMUXC_SAI3_TXD_SAI3_TX_DATA0 0xd6
809 MX8MN_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0xd6
810 >;
811 };
812
813 pinctrl_spi1: spi1grp {
814 fsl,pins = <
815 MX8MN_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK 0x82
816 MX8MN_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI 0x82
817 MX8MN_IOMUXC_ECSPI1_MISO_ECSPI1_MISO 0x82
818 MX8MN_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x40
819 MX8MN_IOMUXC_SD1_DATA1_GPIO2_IO3 0x140 /* CAN_IRQ# */
820 >;
821 };
822
823 pinctrl_spi2: spi2grp {
824 fsl,pins = <
825 MX8MN_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0x82
826 MX8MN_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0x82
827 MX8MN_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0x82
828 MX8MN_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0x40 /* SS0 */
829 >;
830 };
831
832 pinctrl_uart1: uart1grp {
833 fsl,pins = <
834 MX8MN_IOMUXC_UART1_RXD_UART1_DCE_RX 0x140
835 MX8MN_IOMUXC_UART1_TXD_UART1_DCE_TX 0x140
836 >;
837 };
838
839 pinctrl_uart1_gpio: uart1gpiogrp {
840 fsl,pins = <
841 MX8MN_IOMUXC_SAI2_TXD0_GPIO4_IO26 0x40000110 /* HALF */
842 MX8MN_IOMUXC_SAI2_TXC_GPIO4_IO25 0x40000110 /* TERM */
843 MX8MN_IOMUXC_SAI2_RXD0_GPIO4_IO23 0x40000110 /* RS485 */
844 >;
845 };
846
847 pinctrl_uart2: uart2grp {
848 fsl,pins = <
849 MX8MN_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140
850 MX8MN_IOMUXC_UART2_TXD_UART2_DCE_TX 0x140
851 >;
852 };
853
854 pinctrl_uart3_gpio: uart3_gpiogrp {
855 fsl,pins = <
856 MX8MN_IOMUXC_SD2_CD_B_GPIO2_IO12 0x41 /* BT_EN# */
857 >;
858 };
859
860 pinctrl_uart3: uart3grp {
861 fsl,pins = <
862 MX8MN_IOMUXC_UART3_RXD_UART3_DCE_RX 0x140
863 MX8MN_IOMUXC_UART3_TXD_UART3_DCE_TX 0x140
864 MX8MN_IOMUXC_SD1_CLK_GPIO2_IO0 0x140 /* CTS */
865 MX8MN_IOMUXC_SD1_CMD_GPIO2_IO1 0x140 /* RTS */
866 >;
867 };
868
869 pinctrl_uart4: uart4grp {
870 fsl,pins = <
871 MX8MN_IOMUXC_UART4_RXD_UART4_DCE_RX 0x140
872 MX8MN_IOMUXC_UART4_TXD_UART4_DCE_TX 0x140
873 MX8MN_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x141 /* GNSS_GASP */
874 >;
875 };
876
877 pinctrl_usdhc2: usdhc2grp {
878 fsl,pins = <
879 MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK 0x190
880 MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0
881 MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0
882 MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0
883 MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0
884 MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0
885 >;
886 };
887
888 pinctrl_usdhc3: usdhc3grp {
889 fsl,pins = <
890 MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK 0x190
891 MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d0
892 MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d0
893 MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d0
894 MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0
895 MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d0
896 MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d0
897 MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d0
898 MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d0
899 MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d0
900 MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x190
901 >;
902 };
903
904 pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
905 fsl,pins = <
906 MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK 0x194
907 MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4
908 MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4
909 MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4
910 MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4
911 MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4
912 MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4
913 MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4
914 MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4
915 MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4
916 MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x194
917 >;
918 };
919
920 pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
921 fsl,pins = <
922 MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK 0x196
923 MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6
924 MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d6
925 MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d6
926 MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d6
927 MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d6
928 MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d6
929 MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d6
930 MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d6
931 MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d6
932 MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x196
933 >;
934 };
935
936 pinctrl_wdog: wdoggrp {
937 fsl,pins = <
938 MX8MN_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6
939 >;
940 };
941};