blob: 77c4ba953075958444eb8dae88beb50933c3a2de [file] [log] [blame]
Tom Rini83d290c2018-05-06 17:58:06 -04001// SPDX-License-Identifier: GPL-2.0+
Khoronzhuk, Ivane165b1d2014-10-22 17:47:56 +03002/*
3 * Enhanced Direct Memory Access (EDMA3) Controller
4 *
5 * (C) Copyright 2014
6 * Texas Instruments Incorporated, <www.ti.com>
7 *
8 * Author: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
Khoronzhuk, Ivane165b1d2014-10-22 17:47:56 +03009 */
10
Simon Glass90526e92020-05-10 11:39:56 -060011#include <asm/cache.h>
Khoronzhuk, Ivane165b1d2014-10-22 17:47:56 +030012#include <asm/io.h>
13#include <common.h>
Simon Glass9d922452017-05-17 17:18:03 -060014#include <dm.h>
Álvaro Fernández Rojas10b4dc52018-11-28 19:17:49 +010015#include <dma-uclass.h>
Mugunthan V N1218e5c2016-02-15 15:31:41 +053016#include <asm/omap_common.h>
Khoronzhuk, Ivane165b1d2014-10-22 17:47:56 +030017#include <asm/ti-common/ti-edma3.h>
18
19#define EDMA3_SL_BASE(slot) (0x4000 + ((slot) << 5))
20#define EDMA3_SL_MAX_NUM 512
21#define EDMA3_SLOPT_FIFO_WIDTH_MASK (0x7 << 8)
22
23#define EDMA3_QCHMAP(ch) 0x0200 + ((ch) << 2)
24#define EDMA3_CHMAP_PARSET_MASK 0x1ff
25#define EDMA3_CHMAP_PARSET_SHIFT 0x5
26#define EDMA3_CHMAP_TRIGWORD_SHIFT 0x2
27
28#define EDMA3_QEMCR 0x314
29#define EDMA3_IPR 0x1068
30#define EDMA3_IPRH 0x106c
31#define EDMA3_ICR 0x1070
32#define EDMA3_ICRH 0x1074
33#define EDMA3_QEECR 0x1088
34#define EDMA3_QEESR 0x108c
35#define EDMA3_QSECR 0x1094
36
Tero Kristo72b7af52017-12-29 11:47:46 +053037#define EDMA_FILL_BUFFER_SIZE 512
38
Mugunthan V N1218e5c2016-02-15 15:31:41 +053039struct ti_edma3_priv {
40 u32 base;
41};
42
Tero Kristo72b7af52017-12-29 11:47:46 +053043static u8 edma_fill_buffer[EDMA_FILL_BUFFER_SIZE] __aligned(ARCH_DMA_MINALIGN);
44
Khoronzhuk, Ivane165b1d2014-10-22 17:47:56 +030045/**
46 * qedma3_start - start qdma on a channel
47 * @base: base address of edma
48 * @cfg: pinter to struct edma3_channel_config where you can set
49 * the slot number to associate with, the chnum, which corresponds
50 * your quick channel number 0-7, complete code - transfer complete code
51 * and trigger slot word - which has to correspond to the word number in
52 * edma3_slot_layout struct for generating event.
53 *
54 */
55void qedma3_start(u32 base, struct edma3_channel_config *cfg)
56{
57 u32 qchmap;
58
59 /* Clear the pending int bit */
60 if (cfg->complete_code < 32)
61 __raw_writel(1 << cfg->complete_code, base + EDMA3_ICR);
62 else
63 __raw_writel(1 << cfg->complete_code, base + EDMA3_ICRH);
64
65 /* Map parameter set and trigger word 7 to quick channel */
66 qchmap = ((EDMA3_CHMAP_PARSET_MASK & cfg->slot)
67 << EDMA3_CHMAP_PARSET_SHIFT) |
68 (cfg->trigger_slot_word << EDMA3_CHMAP_TRIGWORD_SHIFT);
69
70 __raw_writel(qchmap, base + EDMA3_QCHMAP(cfg->chnum));
71
72 /* Clear missed event if set*/
73 __raw_writel(1 << cfg->chnum, base + EDMA3_QSECR);
74 __raw_writel(1 << cfg->chnum, base + EDMA3_QEMCR);
75
76 /* Enable qdma channel event */
77 __raw_writel(1 << cfg->chnum, base + EDMA3_QEESR);
78}
79
80/**
81 * edma3_set_dest - set initial DMA destination address in parameter RAM slot
82 * @base: base address of edma
83 * @slot: parameter RAM slot being configured
84 * @dst: physical address of destination (memory, controller FIFO, etc)
85 * @addressMode: INCR, except in very rare cases
86 * @width: ignored unless @addressMode is FIFO, else specifies the
87 * width to use when addressing the fifo (e.g. W8BIT, W32BIT)
88 *
89 * Note that the destination address is modified during the DMA transfer
90 * according to edma3_set_dest_index().
91 */
92void edma3_set_dest(u32 base, int slot, u32 dst, enum edma3_address_mode mode,
93 enum edma3_fifo_width width)
94{
95 u32 opt;
96 struct edma3_slot_layout *rg;
97
98 rg = (struct edma3_slot_layout *)(base + EDMA3_SL_BASE(slot));
99
100 opt = __raw_readl(&rg->opt);
101 if (mode == FIFO)
102 opt = (opt & EDMA3_SLOPT_FIFO_WIDTH_MASK) |
103 (EDMA3_SLOPT_DST_ADDR_CONST_MODE |
104 EDMA3_SLOPT_FIFO_WIDTH_SET(width));
105 else
106 opt &= ~EDMA3_SLOPT_DST_ADDR_CONST_MODE;
107
108 __raw_writel(opt, &rg->opt);
109 __raw_writel(dst, &rg->dst);
110}
111
112/**
113 * edma3_set_dest_index - configure DMA destination address indexing
114 * @base: base address of edma
115 * @slot: parameter RAM slot being configured
116 * @bidx: byte offset between destination arrays in a frame
117 * @cidx: byte offset between destination frames in a block
118 *
119 * Offsets are specified to support either contiguous or discontiguous
120 * memory transfers, or repeated access to a hardware register, as needed.
121 * When accessing hardware registers, both offsets are normally zero.
122 */
123void edma3_set_dest_index(u32 base, unsigned slot, int bidx, int cidx)
124{
125 u32 src_dst_bidx;
126 u32 src_dst_cidx;
127 struct edma3_slot_layout *rg;
128
129 rg = (struct edma3_slot_layout *)(base + EDMA3_SL_BASE(slot));
130
131 src_dst_bidx = __raw_readl(&rg->src_dst_bidx);
132 src_dst_cidx = __raw_readl(&rg->src_dst_cidx);
133
134 __raw_writel((src_dst_bidx & 0x0000ffff) | (bidx << 16),
135 &rg->src_dst_bidx);
136 __raw_writel((src_dst_cidx & 0x0000ffff) | (cidx << 16),
137 &rg->src_dst_cidx);
138}
139
140/**
141 * edma3_set_dest_addr - set destination address for slot only
142 */
143void edma3_set_dest_addr(u32 base, int slot, u32 dst)
144{
145 struct edma3_slot_layout *rg;
146
147 rg = (struct edma3_slot_layout *)(base + EDMA3_SL_BASE(slot));
148 __raw_writel(dst, &rg->dst);
149}
150
151/**
152 * edma3_set_src - set initial DMA source address in parameter RAM slot
153 * @base: base address of edma
154 * @slot: parameter RAM slot being configured
155 * @src_port: physical address of source (memory, controller FIFO, etc)
156 * @mode: INCR, except in very rare cases
157 * @width: ignored unless @addressMode is FIFO, else specifies the
158 * width to use when addressing the fifo (e.g. W8BIT, W32BIT)
159 *
160 * Note that the source address is modified during the DMA transfer
161 * according to edma3_set_src_index().
162 */
163void edma3_set_src(u32 base, int slot, u32 src, enum edma3_address_mode mode,
164 enum edma3_fifo_width width)
165{
166 u32 opt;
167 struct edma3_slot_layout *rg;
168
169 rg = (struct edma3_slot_layout *)(base + EDMA3_SL_BASE(slot));
170
171 opt = __raw_readl(&rg->opt);
172 if (mode == FIFO)
173 opt = (opt & EDMA3_SLOPT_FIFO_WIDTH_MASK) |
174 (EDMA3_SLOPT_DST_ADDR_CONST_MODE |
175 EDMA3_SLOPT_FIFO_WIDTH_SET(width));
176 else
177 opt &= ~EDMA3_SLOPT_DST_ADDR_CONST_MODE;
178
179 __raw_writel(opt, &rg->opt);
180 __raw_writel(src, &rg->src);
181}
182
183/**
184 * edma3_set_src_index - configure DMA source address indexing
185 * @base: base address of edma
186 * @slot: parameter RAM slot being configured
187 * @bidx: byte offset between source arrays in a frame
188 * @cidx: byte offset between source frames in a block
189 *
190 * Offsets are specified to support either contiguous or discontiguous
191 * memory transfers, or repeated access to a hardware register, as needed.
192 * When accessing hardware registers, both offsets are normally zero.
193 */
194void edma3_set_src_index(u32 base, unsigned slot, int bidx, int cidx)
195{
196 u32 src_dst_bidx;
197 u32 src_dst_cidx;
198 struct edma3_slot_layout *rg;
199
200 rg = (struct edma3_slot_layout *)(base + EDMA3_SL_BASE(slot));
201
202 src_dst_bidx = __raw_readl(&rg->src_dst_bidx);
203 src_dst_cidx = __raw_readl(&rg->src_dst_cidx);
204
205 __raw_writel((src_dst_bidx & 0xffff0000) | bidx,
206 &rg->src_dst_bidx);
207 __raw_writel((src_dst_cidx & 0xffff0000) | cidx,
208 &rg->src_dst_cidx);
209}
210
211/**
212 * edma3_set_src_addr - set source address for slot only
213 */
214void edma3_set_src_addr(u32 base, int slot, u32 src)
215{
216 struct edma3_slot_layout *rg;
217
218 rg = (struct edma3_slot_layout *)(base + EDMA3_SL_BASE(slot));
219 __raw_writel(src, &rg->src);
220}
221
222/**
223 * edma3_set_transfer_params - configure DMA transfer parameters
224 * @base: base address of edma
225 * @slot: parameter RAM slot being configured
226 * @acnt: how many bytes per array (at least one)
227 * @bcnt: how many arrays per frame (at least one)
228 * @ccnt: how many frames per block (at least one)
229 * @bcnt_rld: used only for A-Synchronized transfers; this specifies
230 * the value to reload into bcnt when it decrements to zero
231 * @sync_mode: ASYNC or ABSYNC
232 *
233 * See the EDMA3 documentation to understand how to configure and link
234 * transfers using the fields in PaRAM slots. If you are not doing it
235 * all at once with edma3_write_slot(), you will use this routine
236 * plus two calls each for source and destination, setting the initial
237 * address and saying how to index that address.
238 *
239 * An example of an A-Synchronized transfer is a serial link using a
240 * single word shift register. In that case, @acnt would be equal to
241 * that word size; the serial controller issues a DMA synchronization
242 * event to transfer each word, and memory access by the DMA transfer
243 * controller will be word-at-a-time.
244 *
245 * An example of an AB-Synchronized transfer is a device using a FIFO.
246 * In that case, @acnt equals the FIFO width and @bcnt equals its depth.
247 * The controller with the FIFO issues DMA synchronization events when
248 * the FIFO threshold is reached, and the DMA transfer controller will
249 * transfer one frame to (or from) the FIFO. It will probably use
250 * efficient burst modes to access memory.
251 */
252void edma3_set_transfer_params(u32 base, int slot, int acnt,
253 int bcnt, int ccnt, u16 bcnt_rld,
254 enum edma3_sync_dimension sync_mode)
255{
256 u32 opt;
257 u32 link_bcntrld;
258 struct edma3_slot_layout *rg;
259
260 rg = (struct edma3_slot_layout *)(base + EDMA3_SL_BASE(slot));
261
262 link_bcntrld = __raw_readl(&rg->link_bcntrld);
263
264 __raw_writel((bcnt_rld << 16) | (0x0000ffff & link_bcntrld),
265 &rg->link_bcntrld);
266
267 opt = __raw_readl(&rg->opt);
268 if (sync_mode == ASYNC)
269 __raw_writel(opt & ~EDMA3_SLOPT_AB_SYNC, &rg->opt);
270 else
271 __raw_writel(opt | EDMA3_SLOPT_AB_SYNC, &rg->opt);
272
273 /* Set the acount, bcount, ccount registers */
274 __raw_writel((bcnt << 16) | (acnt & 0xffff), &rg->a_b_cnt);
275 __raw_writel(0xffff & ccnt, &rg->ccnt);
276}
277
278/**
279 * edma3_write_slot - write parameter RAM data for slot
280 * @base: base address of edma
281 * @slot: number of parameter RAM slot being modified
282 * @param: data to be written into parameter RAM slot
283 *
284 * Use this to assign all parameters of a transfer at once. This
285 * allows more efficient setup of transfers than issuing multiple
286 * calls to set up those parameters in small pieces, and provides
287 * complete control over all transfer options.
288 */
289void edma3_write_slot(u32 base, int slot, struct edma3_slot_layout *param)
290{
291 int i;
292 u32 *p = (u32 *)param;
293 u32 *addr = (u32 *)(base + EDMA3_SL_BASE(slot));
294
295 for (i = 0; i < sizeof(struct edma3_slot_layout)/4; i += 4)
296 __raw_writel(*p++, addr++);
297}
298
299/**
300 * edma3_read_slot - read parameter RAM data from slot
301 * @base: base address of edma
302 * @slot: number of parameter RAM slot being copied
303 * @param: where to store copy of parameter RAM data
304 *
305 * Use this to read data from a parameter RAM slot, perhaps to
306 * save them as a template for later reuse.
307 */
308void edma3_read_slot(u32 base, int slot, struct edma3_slot_layout *param)
309{
310 int i;
311 u32 *p = (u32 *)param;
312 u32 *addr = (u32 *)(base + EDMA3_SL_BASE(slot));
313
314 for (i = 0; i < sizeof(struct edma3_slot_layout)/4; i += 4)
315 *p++ = __raw_readl(addr++);
316}
317
318void edma3_slot_configure(u32 base, int slot, struct edma3_slot_config *cfg)
319{
320 struct edma3_slot_layout *rg;
321
322 rg = (struct edma3_slot_layout *)(base + EDMA3_SL_BASE(slot));
323
324 __raw_writel(cfg->opt, &rg->opt);
325 __raw_writel(cfg->src, &rg->src);
326 __raw_writel((cfg->bcnt << 16) | (cfg->acnt & 0xffff), &rg->a_b_cnt);
327 __raw_writel(cfg->dst, &rg->dst);
328 __raw_writel((cfg->dst_bidx << 16) |
329 (cfg->src_bidx & 0xffff), &rg->src_dst_bidx);
330 __raw_writel((cfg->bcntrld << 16) |
331 (cfg->link & 0xffff), &rg->link_bcntrld);
332 __raw_writel((cfg->dst_cidx << 16) |
333 (cfg->src_cidx & 0xffff), &rg->src_dst_cidx);
334 __raw_writel(0xffff & cfg->ccnt, &rg->ccnt);
335}
336
337/**
338 * edma3_check_for_transfer - check if transfer coplete by checking
339 * interrupt pending bit. Clear interrupt pending bit if complete.
340 * @base: base address of edma
341 * @cfg: pinter to struct edma3_channel_config which was passed
342 * to qedma3_start when you started qdma channel
343 *
344 * Return 0 if complete, 1 if not.
345 */
346int edma3_check_for_transfer(u32 base, struct edma3_channel_config *cfg)
347{
348 u32 inum;
349 u32 ipr_base;
350 u32 icr_base;
351
352 if (cfg->complete_code < 32) {
353 ipr_base = base + EDMA3_IPR;
354 icr_base = base + EDMA3_ICR;
355 inum = 1 << cfg->complete_code;
356 } else {
357 ipr_base = base + EDMA3_IPRH;
358 icr_base = base + EDMA3_ICRH;
359 inum = 1 << (cfg->complete_code - 32);
360 }
361
362 /* check complete interrupt */
363 if (!(__raw_readl(ipr_base) & inum))
364 return 1;
365
366 /* clean up the pending int bit */
367 __raw_writel(inum, icr_base);
368
369 return 0;
370}
371
372/**
373 * qedma3_stop - stops dma on the channel passed
374 * @base: base address of edma
375 * @cfg: pinter to struct edma3_channel_config which was passed
376 * to qedma3_start when you started qdma channel
377 */
378void qedma3_stop(u32 base, struct edma3_channel_config *cfg)
379{
380 /* Disable qdma channel event */
381 __raw_writel(1 << cfg->chnum, base + EDMA3_QEECR);
382
383 /* clean up the interrupt indication */
384 if (cfg->complete_code < 32)
385 __raw_writel(1 << cfg->complete_code, base + EDMA3_ICR);
386 else
387 __raw_writel(1 << cfg->complete_code, base + EDMA3_ICRH);
388
389 /* Clear missed event if set*/
390 __raw_writel(1 << cfg->chnum, base + EDMA3_QSECR);
391 __raw_writel(1 << cfg->chnum, base + EDMA3_QEMCR);
392
393 /* Clear the channel map */
394 __raw_writel(0, base + EDMA3_QCHMAP(cfg->chnum));
395}
Vignesh R664ab2c2015-08-17 13:29:55 +0530396
Mugunthan V N1218e5c2016-02-15 15:31:41 +0530397void __edma3_transfer(unsigned long edma3_base_addr, unsigned int edma_slot_num,
Tero Kristo72b7af52017-12-29 11:47:46 +0530398 void *dst, void *src, size_t len, size_t s_len)
Vignesh R664ab2c2015-08-17 13:29:55 +0530399{
400 struct edma3_slot_config slot;
401 struct edma3_channel_config edma_channel;
402 int b_cnt_value = 1;
403 int rem_bytes = 0;
404 int a_cnt_value = len;
405 unsigned int addr = (unsigned int) (dst);
406 unsigned int max_acnt = 0x7FFFU;
407
Tero Kristo72b7af52017-12-29 11:47:46 +0530408 if (len > s_len) {
409 b_cnt_value = (len / s_len);
410 rem_bytes = (len % s_len);
411 a_cnt_value = s_len;
412 } else if (len > max_acnt) {
Vignesh R664ab2c2015-08-17 13:29:55 +0530413 b_cnt_value = (len / max_acnt);
414 rem_bytes = (len % max_acnt);
415 a_cnt_value = max_acnt;
416 }
417
418 slot.opt = 0;
419 slot.src = ((unsigned int) src);
420 slot.acnt = a_cnt_value;
421 slot.bcnt = b_cnt_value;
422 slot.ccnt = 1;
Tero Kristo72b7af52017-12-29 11:47:46 +0530423 if (len == s_len)
424 slot.src_bidx = a_cnt_value;
425 else
426 slot.src_bidx = 0;
Vignesh R664ab2c2015-08-17 13:29:55 +0530427 slot.dst_bidx = a_cnt_value;
428 slot.src_cidx = 0;
429 slot.dst_cidx = 0;
430 slot.link = EDMA3_PARSET_NULL_LINK;
431 slot.bcntrld = 0;
432 slot.opt = EDMA3_SLOPT_TRANS_COMP_INT_ENB |
433 EDMA3_SLOPT_COMP_CODE(0) |
434 EDMA3_SLOPT_STATIC | EDMA3_SLOPT_AB_SYNC;
435
436 edma3_slot_configure(edma3_base_addr, edma_slot_num, &slot);
437 edma_channel.slot = edma_slot_num;
438 edma_channel.chnum = 0;
439 edma_channel.complete_code = 0;
440 /* set event trigger to dst update */
441 edma_channel.trigger_slot_word = EDMA3_TWORD(dst);
442
443 qedma3_start(edma3_base_addr, &edma_channel);
444 edma3_set_dest_addr(edma3_base_addr, edma_channel.slot, addr);
445
446 while (edma3_check_for_transfer(edma3_base_addr, &edma_channel))
447 ;
448 qedma3_stop(edma3_base_addr, &edma_channel);
449
450 if (rem_bytes != 0) {
451 slot.opt = 0;
Tero Kristo72b7af52017-12-29 11:47:46 +0530452 if (len == s_len)
453 slot.src =
454 (b_cnt_value * max_acnt) + ((unsigned int) src);
455 else
456 slot.src = (unsigned int) src;
Vignesh R664ab2c2015-08-17 13:29:55 +0530457 slot.acnt = rem_bytes;
458 slot.bcnt = 1;
459 slot.ccnt = 1;
460 slot.src_bidx = rem_bytes;
461 slot.dst_bidx = rem_bytes;
462 slot.src_cidx = 0;
463 slot.dst_cidx = 0;
464 slot.link = EDMA3_PARSET_NULL_LINK;
465 slot.bcntrld = 0;
466 slot.opt = EDMA3_SLOPT_TRANS_COMP_INT_ENB |
467 EDMA3_SLOPT_COMP_CODE(0) |
468 EDMA3_SLOPT_STATIC | EDMA3_SLOPT_AB_SYNC;
469 edma3_slot_configure(edma3_base_addr, edma_slot_num, &slot);
470 edma_channel.slot = edma_slot_num;
471 edma_channel.chnum = 0;
472 edma_channel.complete_code = 0;
473 /* set event trigger to dst update */
474 edma_channel.trigger_slot_word = EDMA3_TWORD(dst);
475
476 qedma3_start(edma3_base_addr, &edma_channel);
477 edma3_set_dest_addr(edma3_base_addr, edma_channel.slot, addr +
478 (max_acnt * b_cnt_value));
479 while (edma3_check_for_transfer(edma3_base_addr, &edma_channel))
480 ;
481 qedma3_stop(edma3_base_addr, &edma_channel);
482 }
483}
Mugunthan V N1218e5c2016-02-15 15:31:41 +0530484
Tero Kristo72b7af52017-12-29 11:47:46 +0530485void __edma3_fill(unsigned long edma3_base_addr, unsigned int edma_slot_num,
486 void *dst, u8 val, size_t len)
487{
488 int xfer_len;
489 int max_xfer = EDMA_FILL_BUFFER_SIZE * 65535;
490
491 memset((void *)edma_fill_buffer, val, sizeof(edma_fill_buffer));
492
493 while (len) {
494 xfer_len = len;
495 if (xfer_len > max_xfer)
496 xfer_len = max_xfer;
497
498 __edma3_transfer(edma3_base_addr, edma_slot_num, dst,
499 edma_fill_buffer, xfer_len,
500 EDMA_FILL_BUFFER_SIZE);
501 len -= xfer_len;
502 dst += xfer_len;
503 }
504}
505
Mugunthan V N1218e5c2016-02-15 15:31:41 +0530506#ifndef CONFIG_DMA
507
508void edma3_transfer(unsigned long edma3_base_addr, unsigned int edma_slot_num,
509 void *dst, void *src, size_t len)
510{
Tero Kristo72b7af52017-12-29 11:47:46 +0530511 __edma3_transfer(edma3_base_addr, edma_slot_num, dst, src, len, len);
512}
513
514void edma3_fill(unsigned long edma3_base_addr, unsigned int edma_slot_num,
515 void *dst, u8 val, size_t len)
516{
517 __edma3_fill(edma3_base_addr, edma_slot_num, dst, val, len);
Mugunthan V N1218e5c2016-02-15 15:31:41 +0530518}
519
520#else
521
522static int ti_edma3_transfer(struct udevice *dev, int direction, void *dst,
523 void *src, size_t len)
524{
525 struct ti_edma3_priv *priv = dev_get_priv(dev);
526
527 /* enable edma3 clocks */
528 enable_edma3_clocks();
529
530 switch (direction) {
531 case DMA_MEM_TO_MEM:
Tero Kristo72b7af52017-12-29 11:47:46 +0530532 __edma3_transfer(priv->base, 1, dst, src, len, len);
Mugunthan V N1218e5c2016-02-15 15:31:41 +0530533 break;
534 default:
Masahiro Yamada9b643e32017-09-16 14:10:41 +0900535 pr_err("Transfer type not implemented in DMA driver\n");
Mugunthan V N1218e5c2016-02-15 15:31:41 +0530536 break;
537 }
538
539 /* disable edma3 clocks */
540 disable_edma3_clocks();
541
542 return 0;
543}
544
545static int ti_edma3_ofdata_to_platdata(struct udevice *dev)
546{
547 struct ti_edma3_priv *priv = dev_get_priv(dev);
548
Simon Glassa821c4a2017-05-17 17:18:05 -0600549 priv->base = devfdt_get_addr(dev);
Mugunthan V N1218e5c2016-02-15 15:31:41 +0530550
551 return 0;
552}
553
554static int ti_edma3_probe(struct udevice *dev)
555{
556 struct dma_dev_priv *uc_priv = dev_get_uclass_priv(dev);
557
558 uc_priv->supported = DMA_SUPPORTS_MEM_TO_MEM;
559
560 return 0;
561}
562
563static const struct dma_ops ti_edma3_ops = {
564 .transfer = ti_edma3_transfer,
565};
566
567static const struct udevice_id ti_edma3_ids[] = {
568 { .compatible = "ti,edma3" },
569 { }
570};
571
572U_BOOT_DRIVER(ti_edma3) = {
573 .name = "ti_edma3",
574 .id = UCLASS_DMA,
575 .of_match = ti_edma3_ids,
576 .ops = &ti_edma3_ops,
577 .ofdata_to_platdata = ti_edma3_ofdata_to_platdata,
578 .probe = ti_edma3_probe,
579 .priv_auto_alloc_size = sizeof(struct ti_edma3_priv),
580};
581#endif /* CONFIG_DMA */