blob: de82b0487aeb73caa5503eb7cb2afe727f38aa08 [file] [log] [blame]
Wolfgang Denk3df5bea2005-10-09 01:41:48 +02001/***********************************************************************
2 *
3 * Copyright (C) 2005 by Videon Central, Inc.
4 *
5 * $Id$
6 * @Author: Arthur Shipkowski
7 * @Descr: Ethernet driver for the NS7520. Uses polled Ethernet, like
8 * the older netarmeth driver. Note that attempting to filter
9 * broadcast and multicast out in the SAFR register will cause
10 * bad things due to released errata.
11 * @References: [1] NS7520 Hardware Reference, December 2003
12 * [2] Intel LXT971 Datasheet #249414 Rev. 02
13 *
14 ***********************************************************************/
15
16#include <common.h>
17
Wolfgang Denk3df5bea2005-10-09 01:41:48 +020018#include <net.h> /* NetSendPacket */
19#include <asm/arch/netarm_registers.h>
20#include <asm/arch/netarm_dma_module.h>
21
22#include "ns7520_eth.h" /* for Ethernet and PHY */
23
24/**
25 * Send an error message to the terminal.
26 */
27#define ERROR(x) \
28do { \
29 char *__foo = strrchr(__FILE__, '/'); \
30 \
31 printf("%s: %d: %s(): ", (__foo == NULL ? __FILE__ : (__foo + 1)), \
32 __LINE__, __FUNCTION__); \
33 printf x; printf("\n"); \
34} while (0);
35
36/* some definition to make transistion to linux easier */
37
38#define NS7520_DRIVER_NAME "eth"
39#define KERN_WARNING "Warning:"
40#define KERN_ERR "Error:"
41#define KERN_INFO "Info:"
42
43#if 1
44# define DEBUG
45#endif
46
47#ifdef DEBUG
48# define printk printf
49
50# define DEBUG_INIT 0x0001
51# define DEBUG_MINOR 0x0002
52# define DEBUG_RX 0x0004
53# define DEBUG_TX 0x0008
54# define DEBUG_INT 0x0010
55# define DEBUG_POLL 0x0020
56# define DEBUG_LINK 0x0040
57# define DEBUG_MII 0x0100
58# define DEBUG_MII_LOW 0x0200
59# define DEBUG_MEM 0x0400
60# define DEBUG_ERROR 0x4000
61# define DEBUG_ERROR_CRIT 0x8000
62
63static int nDebugLvl = DEBUG_ERROR_CRIT;
64
65# define DEBUG_ARGS0( FLG, a0 ) if( ( nDebugLvl & (FLG) ) == (FLG) ) \
66 printf("%s: " a0, __FUNCTION__, 0, 0, 0, 0, 0, 0 )
67# define DEBUG_ARGS1( FLG, a0, a1 ) if( ( nDebugLvl & (FLG) ) == (FLG)) \
68 printf("%s: " a0, __FUNCTION__, (int)(a1), 0, 0, 0, 0, 0 )
69# define DEBUG_ARGS2( FLG, a0, a1, a2 ) if( (nDebugLvl & (FLG)) ==(FLG))\
70 printf("%s: " a0, __FUNCTION__, (int)(a1), (int)(a2), 0, 0,0,0 )
71# define DEBUG_ARGS3( FLG, a0, a1, a2, a3 ) if((nDebugLvl &(FLG))==(FLG))\
72 printf("%s: "a0,__FUNCTION__,(int)(a1),(int)(a2),(int)(a3),0,0,0)
73# define DEBUG_FN( FLG ) if( (nDebugLvl & (FLG)) == (FLG) ) \
74 printf("\r%s:line %d\n", (int)__FUNCTION__, __LINE__, 0,0,0,0);
75# define ASSERT( expr, func ) if( !( expr ) ) { \
76 printf( "Assertion failed! %s:line %d %s\n", \
77 (int)__FUNCTION__,__LINE__,(int)(#expr),0,0,0); \
78 func }
79#else /* DEBUG */
80# define printk(...)
81# define DEBUG_ARGS0( FLG, a0 )
82# define DEBUG_ARGS1( FLG, a0, a1 )
83# define DEBUG_ARGS2( FLG, a0, a1, a2 )
84# define DEBUG_ARGS3( FLG, a0, a1, a2, a3 )
85# define DEBUG_FN( n )
86# define ASSERT(expr, func)
87#endif /* DEBUG */
88
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020089#define NS7520_MII_NEG_DELAY (5*CONFIG_SYS_HZ) /* in s */
90#define TX_TIMEOUT (5*CONFIG_SYS_HZ) /* in s */
Wolfgang Denk3df5bea2005-10-09 01:41:48 +020091#define RX_STALL_WORKAROUND_CNT 100
92
93static int ns7520_eth_reset(void);
94
95static void ns7520_link_auto_negotiate(void);
96static void ns7520_link_update_egcr(void);
97static void ns7520_link_print_changed(void);
98
99/* the PHY stuff */
100
101static char ns7520_mii_identify_phy(void);
102static unsigned short ns7520_mii_read(unsigned short uiRegister);
103static void ns7520_mii_write(unsigned short uiRegister,
104 unsigned short uiData);
105static unsigned int ns7520_mii_get_clock_divisor(unsigned int
106 unMaxMDIOClk);
107static unsigned int ns7520_mii_poll_busy(void);
108
109static unsigned int nPhyMaxMdioClock = PHY_MDIO_MAX_CLK;
110static unsigned int uiLastLinkStatus;
111static PhyType phyDetected = PHY_NONE;
112
113/***********************************************************************
114 * @Function: eth_init
115 * @Return: -1 on failure otherwise 0
116 * @Descr: Initializes the ethernet engine and uses either FS Forth's default
117 * MAC addr or the one in environment
118 ***********************************************************************/
119
120int eth_init(bd_t * pbis)
121{
122 unsigned char aucMACAddr[6];
123 char *pcTmp = getenv("ethaddr");
124 char *pcEnd;
125 int i;
126
127 DEBUG_FN(DEBUG_INIT);
128
129 /* no need to check for hardware */
130
131 if (!ns7520_eth_reset())
132 return -1;
133
134 if (NULL == pcTmp)
135 return -1;
136
137 for (i = 0; i < 6; i++) {
138 aucMACAddr[i] =
139 pcTmp ? simple_strtoul(pcTmp, &pcEnd, 16) : 0;
140 pcTmp = (*pcTmp) ? pcEnd + 1 : pcEnd;
141 }
142
143 /* configure ethernet address */
144
145 *get_eth_reg_addr(NS7520_ETH_SA1) =
146 aucMACAddr[5] << 8 | aucMACAddr[4];
147 *get_eth_reg_addr(NS7520_ETH_SA2) =
148 aucMACAddr[3] << 8 | aucMACAddr[2];
149 *get_eth_reg_addr(NS7520_ETH_SA3) =
150 aucMACAddr[1] << 8 | aucMACAddr[0];
151
152 /* enable hardware */
153
154 *get_eth_reg_addr(NS7520_ETH_MAC1) = NS7520_ETH_MAC1_RXEN;
155 *get_eth_reg_addr(NS7520_ETH_SUPP) = NS7520_ETH_SUPP_JABBER;
156 *get_eth_reg_addr(NS7520_ETH_MAC1) = NS7520_ETH_MAC1_RXEN;
157
158 /* the linux kernel may give packets < 60 bytes, for example arp */
159 *get_eth_reg_addr(NS7520_ETH_MAC2) = NS7520_ETH_MAC2_CRCEN |
160 NS7520_ETH_MAC2_PADEN | NS7520_ETH_MAC2_HUGE;
161
162 /* Broadcast/multicast allowed; if you don't set this even unicast chokes */
163 /* Based on NS7520 errata documentation */
164 *get_eth_reg_addr(NS7520_ETH_SAFR) =
165 NS7520_ETH_SAFR_BROAD | NS7520_ETH_SAFR_PRM;
166
167 /* enable receive and transmit FIFO, use 10/100 Mbps MII */
168 *get_eth_reg_addr(NS7520_ETH_EGCR) |=
169 NS7520_ETH_EGCR_ETXWM_75 |
170 NS7520_ETH_EGCR_ERX |
171 NS7520_ETH_EGCR_ERXREG |
172 NS7520_ETH_EGCR_ERXBR | NS7520_ETH_EGCR_ETX;
173
174 return 0;
175}
176
177/***********************************************************************
178 * @Function: eth_send
179 * @Return: -1 on timeout otherwise 1
180 * @Descr: sends one frame by DMA
181 ***********************************************************************/
182
183int eth_send(volatile void *pPacket, int nLen)
184{
185 int i, length32, retval = 1;
186 char *pa;
187 unsigned int *pa32, lastp = 0, rest;
188 unsigned int status;
189
190 pa = (char *) pPacket;
191 pa32 = (unsigned int *) pPacket;
192 length32 = nLen / 4;
193 rest = nLen % 4;
194
195 /* make sure there's no garbage in the last word */
196 switch (rest) {
197 case 0:
198 lastp = pa32[length32 - 1];
199 length32--;
200 break;
201 case 1:
202 lastp = pa32[length32] & 0x000000ff;
203 break;
204 case 2:
205 lastp = pa32[length32] & 0x0000ffff;
206 break;
207 case 3:
208 lastp = pa32[length32] & 0x00ffffff;
209 break;
210 }
211
212 while (((*get_eth_reg_addr(NS7520_ETH_EGSR)) &
213 NS7520_ETH_EGSR_TXREGE)
214 == 0) {
215 }
216
217 /* write to the fifo */
218 for (i = 0; i < length32; i++)
219 *get_eth_reg_addr(NS7520_ETH_FIFO) = pa32[i];
220
221 /* the last word is written to an extra register, this
222 starts the transmission */
223 *get_eth_reg_addr(NS7520_ETH_FIFOL) = lastp;
224
225 /* Wait for it to be done */
226 while ((*get_eth_reg_addr(NS7520_ETH_EGSR) & NS7520_ETH_EGSR_TXBC)
227 == 0) {
228 }
229 status = (*get_eth_reg_addr(NS7520_ETH_ETSR));
230 *get_eth_reg_addr(NS7520_ETH_EGSR) = NS7520_ETH_EGSR_TXBC; /* Clear it now */
231
232 if (status & NS7520_ETH_ETSR_TXOK) {
233 retval = 0; /* We're OK! */
234 } else if (status & NS7520_ETH_ETSR_TXDEF) {
235 printf("Deferred, we'll see.\n");
236 retval = 0;
237 } else if (status & NS7520_ETH_ETSR_TXAL) {
238 printf("Late collision error, %d collisions.\n",
239 (*get_eth_reg_addr(NS7520_ETH_ETSR)) &
240 NS7520_ETH_ETSR_TXCOLC);
241 } else if (status & NS7520_ETH_ETSR_TXAEC) {
242 printf("Excessive collisions: %d\n",
243 (*get_eth_reg_addr(NS7520_ETH_ETSR)) &
244 NS7520_ETH_ETSR_TXCOLC);
245 } else if (status & NS7520_ETH_ETSR_TXAED) {
246 printf("Excessive deferral on xmit.\n");
247 } else if (status & NS7520_ETH_ETSR_TXAUR) {
248 printf("Packet underrun.\n");
249 } else if (status & NS7520_ETH_ETSR_TXAJ) {
250 printf("Jumbo packet error.\n");
251 } else {
252 printf("Error: Should never get here.\n");
253 }
254
255 return (retval);
256}
257
258/***********************************************************************
259 * @Function: eth_rx
260 * @Return: size of last frame in bytes or 0 if no frame available
261 * @Descr: gives one frame to U-Boot which has been copied by DMA engine already
262 * to NetRxPackets[ 0 ].
263 ***********************************************************************/
264
265int eth_rx(void)
266{
267 int i;
268 unsigned short rxlen;
269 unsigned short totrxlen = 0;
270 unsigned int *addr;
271 unsigned int rxstatus, lastrxlen;
272 char *pa;
273
274 /* If RXBR is 1, data block was received */
275 while (((*get_eth_reg_addr(NS7520_ETH_EGSR)) &
276 NS7520_ETH_EGSR_RXBR) == NS7520_ETH_EGSR_RXBR) {
277
278 /* get status register and the length of received block */
279 rxstatus = *get_eth_reg_addr(NS7520_ETH_ERSR);
280 rxlen = (rxstatus & NS7520_ETH_ERSR_RXSIZE) >> 16;
281
282 /* clear RXBR to make fifo available */
283 *get_eth_reg_addr(NS7520_ETH_EGSR) = NS7520_ETH_EGSR_RXBR;
284
285 if (rxstatus & NS7520_ETH_ERSR_ROVER) {
286 printf("Receive overrun, resetting FIFO.\n");
287 *get_eth_reg_addr(NS7520_ETH_EGCR) &=
288 ~NS7520_ETH_EGCR_ERX;
289 udelay(20);
290 *get_eth_reg_addr(NS7520_ETH_EGCR) |=
291 NS7520_ETH_EGCR_ERX;
292 }
293 if (rxlen == 0) {
294 printf("Nothing.\n");
295 return 0;
296 }
297
298 addr = (unsigned int *) NetRxPackets[0];
299 pa = (char *) NetRxPackets[0];
300
301 /* read the fifo */
302 for (i = 0; i < rxlen / 4; i++) {
303 *addr = *get_eth_reg_addr(NS7520_ETH_FIFO);
304 addr++;
305 }
306
307 if ((*get_eth_reg_addr(NS7520_ETH_EGSR)) &
308 NS7520_ETH_EGSR_RXREGR) {
309 /* RXFDB indicates wether the last word is 1,2,3 or 4 bytes long */
310 lastrxlen =
311 ((*get_eth_reg_addr(NS7520_ETH_EGSR)) &
312 NS7520_ETH_EGSR_RXFDB_MA) >> 28;
313 *addr = *get_eth_reg_addr(NS7520_ETH_FIFO);
314 switch (lastrxlen) {
315 case 1:
316 *addr &= 0xff000000;
317 break;
318 case 2:
319 *addr &= 0xffff0000;
320 break;
321 case 3:
322 *addr &= 0xffffff00;
323 break;
324 }
325 }
326
327 /* Pass the packet up to the protocol layers. */
328 NetReceive(NetRxPackets[0], rxlen - 4);
329 totrxlen += rxlen - 4;
330 }
331
332 return totrxlen;
333}
334
335/***********************************************************************
336 * @Function: eth_halt
337 * @Return: n/a
338 * @Descr: stops the ethernet engine
339 ***********************************************************************/
340
341void eth_halt(void)
342{
343 DEBUG_FN(DEBUG_INIT);
344
345 *get_eth_reg_addr(NS7520_ETH_MAC1) &= ~NS7520_ETH_MAC1_RXEN;
346 *get_eth_reg_addr(NS7520_ETH_EGCR) &= ~(NS7520_ETH_EGCR_ERX |
347 NS7520_ETH_EGCR_ERXDMA |
348 NS7520_ETH_EGCR_ERXREG |
349 NS7520_ETH_EGCR_ERXBR |
350 NS7520_ETH_EGCR_ETX |
351 NS7520_ETH_EGCR_ETXDMA);
352}
353
354/***********************************************************************
355 * @Function: ns7520_eth_reset
356 * @Return: 0 on failure otherwise 1
357 * @Descr: resets the ethernet interface and the PHY,
358 * performs auto negotiation or fixed modes
359 ***********************************************************************/
360
361static int ns7520_eth_reset(void)
362{
363 DEBUG_FN(DEBUG_MINOR);
364
365 /* Reset important registers */
366 *get_eth_reg_addr(NS7520_ETH_EGCR) = 0; /* Null it out! */
367 *get_eth_reg_addr(NS7520_ETH_MAC1) &= NS7520_ETH_MAC1_SRST;
368 *get_eth_reg_addr(NS7520_ETH_MAC2) = 0;
369 /* Reset MAC */
370 *get_eth_reg_addr(NS7520_ETH_EGCR) |= NS7520_ETH_EGCR_MAC_RES;
371 udelay(5);
372 *get_eth_reg_addr(NS7520_ETH_EGCR) &= ~NS7520_ETH_EGCR_MAC_RES;
373
374 /* reset and initialize PHY */
375
376 *get_eth_reg_addr(NS7520_ETH_MAC1) &= ~NS7520_ETH_MAC1_SRST;
377
378 /* we don't support hot plugging of PHY, therefore we don't reset
379 phyDetected and nPhyMaxMdioClock here. The risk is if the setting is
380 incorrect the first open
381 may detect the PHY correctly but succeding will fail
382 For reseting the PHY and identifying we have to use the standard
383 MDIO CLOCK value 2.5 MHz only after hardware reset
384 After having identified the PHY we will do faster */
385
386 *get_eth_reg_addr(NS7520_ETH_MCFG) =
387 ns7520_mii_get_clock_divisor(nPhyMaxMdioClock);
388
389 /* reset PHY */
Mike Frysinger8ef583a2010-12-23 15:40:12 -0500390 ns7520_mii_write(MII_BMCR, BMCR_RESET);
391 ns7520_mii_write(MII_BMCR, 0);
Wolfgang Denk3df5bea2005-10-09 01:41:48 +0200392
393 udelay(3000); /* [2] p.70 says at least 300us reset recovery time. */
394
395 /* MII clock has been setup to default, ns7520_mii_identify_phy should
396 work for all */
397
398 if (!ns7520_mii_identify_phy()) {
399 printk(KERN_ERR NS7520_DRIVER_NAME
400 ": Unsupported PHY, aborting\n");
401 return 0;
402 }
403
404 /* now take the highest MDIO clock possible after detection */
405 *get_eth_reg_addr(NS7520_ETH_MCFG) =
406 ns7520_mii_get_clock_divisor(nPhyMaxMdioClock);
407
408 /* PHY has been detected, so there can be no abort reason and we can
409 finish initializing ethernet */
410
411 uiLastLinkStatus = 0xff; /* undefined */
412
413 ns7520_link_auto_negotiate();
414
415 if (phyDetected == PHY_LXT971A)
416 /* set LED2 to link mode */
417 ns7520_mii_write(PHY_LXT971_LED_CFG,
418 (PHY_LXT971_LED_CFG_LINK_ACT <<
419 PHY_LXT971_LED_CFG_SHIFT_LED2) |
420 (PHY_LXT971_LED_CFG_TRANSMIT <<
421 PHY_LXT971_LED_CFG_SHIFT_LED1));
422
423 return 1;
424}
425
426/***********************************************************************
427 * @Function: ns7520_link_auto_negotiate
428 * @Return: void
429 * @Descr: performs auto-negotation of link.
430 ***********************************************************************/
431
432static void ns7520_link_auto_negotiate(void)
433{
434 unsigned long ulStartJiffies;
435 unsigned short uiStatus;
436
437 DEBUG_FN(DEBUG_LINK);
438
439 /* run auto-negotation */
440 /* define what we are capable of */
Mike Frysinger8ef583a2010-12-23 15:40:12 -0500441 ns7520_mii_write(MII_ADVERTISE,
442 LPA_100FULL |
443 LPA_100HALF |
444 LPA_10FULL |
445 LPA_10HALF |
Hugo Villeneuvefec61432008-06-18 12:10:31 -0400446 PHY_ANLPAR_PSB_802_3);
Wolfgang Denk3df5bea2005-10-09 01:41:48 +0200447 /* start auto-negotiation */
Mike Frysinger8ef583a2010-12-23 15:40:12 -0500448 ns7520_mii_write(MII_BMCR, BMCR_ANENABLE | BMCR_ANRESTART);
Wolfgang Denk3df5bea2005-10-09 01:41:48 +0200449
450 /* wait for completion */
451
452 ulStartJiffies = get_timer(0);
453 while (get_timer(0) < ulStartJiffies + NS7520_MII_NEG_DELAY) {
Mike Frysinger8ef583a2010-12-23 15:40:12 -0500454 uiStatus = ns7520_mii_read(MII_BMSR);
Wolfgang Denk3df5bea2005-10-09 01:41:48 +0200455 if ((uiStatus &
Mike Frysinger8ef583a2010-12-23 15:40:12 -0500456 (BMSR_ANEGCOMPLETE | BMSR_LSTATUS)) ==
457 (BMSR_ANEGCOMPLETE | BMSR_LSTATUS)) {
Wolfgang Denk3df5bea2005-10-09 01:41:48 +0200458 /* lucky we are, auto-negotiation succeeded */
459 ns7520_link_print_changed();
460 ns7520_link_update_egcr();
461 return;
462 }
463 }
464
465 DEBUG_ARGS0(DEBUG_LINK, "auto-negotiation timed out\n");
466 /* ignore invalid link settings */
467}
468
469/***********************************************************************
470 * @Function: ns7520_link_update_egcr
471 * @Return: void
472 * @Descr: updates the EGCR and MAC2 link status after mode change or
473 * auto-negotation
474 ***********************************************************************/
475
476static void ns7520_link_update_egcr(void)
477{
478 unsigned int unEGCR;
479 unsigned int unMAC2;
480 unsigned int unIPGT;
481
482 DEBUG_FN(DEBUG_LINK);
483
484 unEGCR = *get_eth_reg_addr(NS7520_ETH_EGCR);
485 unMAC2 = *get_eth_reg_addr(NS7520_ETH_MAC2);
486 unIPGT =
487 *get_eth_reg_addr(NS7520_ETH_IPGT) & ~NS7520_ETH_IPGT_IPGT;
488
489 unEGCR &= ~NS7520_ETH_EGCR_EFULLD;
490 unMAC2 &= ~NS7520_ETH_MAC2_FULLD;
491 if ((uiLastLinkStatus & PHY_LXT971_STAT2_DUPLEX_MODE)
492 == PHY_LXT971_STAT2_DUPLEX_MODE) {
493 unEGCR |= NS7520_ETH_EGCR_EFULLD;
494 unMAC2 |= NS7520_ETH_MAC2_FULLD;
495 unIPGT |= 0x15; /* see [1] p. 167 */
496 } else
497 unIPGT |= 0x12; /* see [1] p. 167 */
498
499 *get_eth_reg_addr(NS7520_ETH_MAC2) = unMAC2;
500 *get_eth_reg_addr(NS7520_ETH_EGCR) = unEGCR;
501 *get_eth_reg_addr(NS7520_ETH_IPGT) = unIPGT;
502}
503
504/***********************************************************************
505 * @Function: ns7520_link_print_changed
506 * @Return: void
507 * @Descr: checks whether the link status has changed and if so prints
508 * the new mode
509 ***********************************************************************/
510
511static void ns7520_link_print_changed(void)
512{
513 unsigned short uiStatus;
514 unsigned short uiControl;
515
516 DEBUG_FN(DEBUG_LINK);
517
Mike Frysinger8ef583a2010-12-23 15:40:12 -0500518 uiControl = ns7520_mii_read(MII_BMCR);
Wolfgang Denk3df5bea2005-10-09 01:41:48 +0200519
Mike Frysinger8ef583a2010-12-23 15:40:12 -0500520 if ((uiControl & BMCR_ANENABLE) == BMCR_ANENABLE) {
521 /* BMSR_LSTATUS is only set on autonegotiation */
522 uiStatus = ns7520_mii_read(MII_BMSR);
Wolfgang Denk3df5bea2005-10-09 01:41:48 +0200523
Mike Frysinger8ef583a2010-12-23 15:40:12 -0500524 if (!(uiStatus & BMSR_LSTATUS)) {
Wolfgang Denk3df5bea2005-10-09 01:41:48 +0200525 printk(KERN_WARNING NS7520_DRIVER_NAME
526 ": link down\n");
527 /* @TODO Linux: carrier_off */
528 } else {
529 /* @TODO Linux: carrier_on */
530 if (phyDetected == PHY_LXT971A) {
531 uiStatus =
532 ns7520_mii_read(PHY_LXT971_STAT2);
533 uiStatus &=
534 (PHY_LXT971_STAT2_100BTX |
535 PHY_LXT971_STAT2_DUPLEX_MODE |
536 PHY_LXT971_STAT2_AUTO_NEG);
537
538 /* mask out all uninteresting parts */
539 }
540 /* other PHYs must store there link information in
541 uiStatus as PHY_LXT971 */
542 }
543 } else {
544 /* mode has been forced, so uiStatus should be the same as the
545 last link status, enforce printing */
546 uiStatus = uiLastLinkStatus;
547 uiLastLinkStatus = 0xff;
548 }
549
550 if (uiStatus != uiLastLinkStatus) {
551 /* save current link status */
552 uiLastLinkStatus = uiStatus;
553
554 /* print new link status */
555
556 printk(KERN_INFO NS7520_DRIVER_NAME
557 ": link mode %i Mbps %s duplex %s\n",
558 (uiStatus & PHY_LXT971_STAT2_100BTX) ? 100 : 10,
559 (uiStatus & PHY_LXT971_STAT2_DUPLEX_MODE) ? "full" :
560 "half",
561 (uiStatus & PHY_LXT971_STAT2_AUTO_NEG) ? "(auto)" :
562 "");
563 }
564}
565
566/***********************************************************************
567 * the MII low level stuff
568 ***********************************************************************/
569
570/***********************************************************************
571 * @Function: ns7520_mii_identify_phy
572 * @Return: 1 if supported PHY has been detected otherwise 0
573 * @Descr: checks for supported PHY and prints the IDs.
574 ***********************************************************************/
575
576static char ns7520_mii_identify_phy(void)
577{
578 unsigned short uiID1;
579 unsigned short uiID2;
580 unsigned char *szName;
581 char cRes = 0;
582
583 DEBUG_FN(DEBUG_MII);
584
Mike Frysinger8ef583a2010-12-23 15:40:12 -0500585 phyDetected = (PhyType) uiID1 = ns7520_mii_read(MII_PHYSID1);
Wolfgang Denk3df5bea2005-10-09 01:41:48 +0200586
587 switch (phyDetected) {
588 case PHY_LXT971A:
589 szName = "LXT971A";
Mike Frysinger8ef583a2010-12-23 15:40:12 -0500590 uiID2 = ns7520_mii_read(MII_PHYSID2);
Wolfgang Denk3df5bea2005-10-09 01:41:48 +0200591 nPhyMaxMdioClock = PHY_LXT971_MDIO_MAX_CLK;
592 cRes = 1;
593 break;
594 case PHY_NONE:
595 default:
596 /* in case uiID1 == 0 && uiID2 == 0 we may have the wrong
597 address or reset sets the wrong NS7520_ETH_MCFG_CLKS */
598
599 uiID2 = 0;
600 szName = "unknown";
601 nPhyMaxMdioClock = PHY_MDIO_MAX_CLK;
602 phyDetected = PHY_NONE;
603 }
604
605 printk(KERN_INFO NS7520_DRIVER_NAME
606 ": PHY (0x%x, 0x%x) = %s detected\n", uiID1, uiID2, szName);
607
608 return cRes;
609}
610
611/***********************************************************************
612 * @Function: ns7520_mii_read
613 * @Return: the data read from PHY register uiRegister
614 * @Descr: the data read may be invalid if timed out. If so, a message
615 * is printed but the invalid data is returned.
616 * The fixed device address is being used.
617 ***********************************************************************/
618
619static unsigned short ns7520_mii_read(unsigned short uiRegister)
620{
621 DEBUG_FN(DEBUG_MII_LOW);
622
623 /* write MII register to be read */
624 *get_eth_reg_addr(NS7520_ETH_MADR) =
625 CONFIG_PHY_ADDR << 8 | uiRegister;
626
627 *get_eth_reg_addr(NS7520_ETH_MCMD) = NS7520_ETH_MCMD_READ;
628
629 if (!ns7520_mii_poll_busy())
630 printk(KERN_WARNING NS7520_DRIVER_NAME
631 ": MII still busy in read\n");
632 /* continue to read */
633
634 *get_eth_reg_addr(NS7520_ETH_MCMD) = 0;
635
636 return (unsigned short) (*get_eth_reg_addr(NS7520_ETH_MRDD));
637}
638
639/***********************************************************************
640 * @Function: ns7520_mii_write
641 * @Return: nothing
642 * @Descr: writes the data to the PHY register. In case of a timeout,
643 * no special handling is performed but a message printed
644 * The fixed device address is being used.
645 ***********************************************************************/
646
647static void ns7520_mii_write(unsigned short uiRegister,
648 unsigned short uiData)
649{
650 DEBUG_FN(DEBUG_MII_LOW);
651
652 /* write MII register to be written */
653 *get_eth_reg_addr(NS7520_ETH_MADR) =
654 CONFIG_PHY_ADDR << 8 | uiRegister;
655
656 *get_eth_reg_addr(NS7520_ETH_MWTD) = uiData;
657
658 if (!ns7520_mii_poll_busy()) {
659 printf(KERN_WARNING NS7520_DRIVER_NAME
660 ": MII still busy in write\n");
661 }
662}
663
664/***********************************************************************
665 * @Function: ns7520_mii_get_clock_divisor
666 * @Return: the clock divisor that should be used in NS7520_ETH_MCFG_CLKS
667 * @Descr: if no clock divisor can be calculated for the
668 * current SYSCLK and the maximum MDIO Clock, a warning is printed
669 * and the greatest divisor is taken
670 ***********************************************************************/
671
672static unsigned int ns7520_mii_get_clock_divisor(unsigned int unMaxMDIOClk)
673{
674 struct {
675 unsigned int unSysClkDivisor;
676 unsigned int unClks; /* field for NS7520_ETH_MCFG_CLKS */
677 } PHYClockDivisors[] = {
678 {
679 4, NS7520_ETH_MCFG_CLKS_4}, {
680 6, NS7520_ETH_MCFG_CLKS_6}, {
681 8, NS7520_ETH_MCFG_CLKS_8}, {
682 10, NS7520_ETH_MCFG_CLKS_10}, {
683 14, NS7520_ETH_MCFG_CLKS_14}, {
684 20, NS7520_ETH_MCFG_CLKS_20}, {
685 28, NS7520_ETH_MCFG_CLKS_28}
686 };
687
688 int nIndexSysClkDiv;
689 int nArraySize =
690 sizeof(PHYClockDivisors) / sizeof(PHYClockDivisors[0]);
691 unsigned int unClks = NS7520_ETH_MCFG_CLKS_28; /* defaults to
692 greatest div */
693
694 DEBUG_FN(DEBUG_INIT);
695
696 for (nIndexSysClkDiv = 0; nIndexSysClkDiv < nArraySize;
697 nIndexSysClkDiv++) {
698 /* find first sysclock divisor that isn't higher than 2.5 MHz
699 clock */
700 if (NETARM_XTAL_FREQ /
701 PHYClockDivisors[nIndexSysClkDiv].unSysClkDivisor <=
702 unMaxMDIOClk) {
703 unClks = PHYClockDivisors[nIndexSysClkDiv].unClks;
704 break;
705 }
706 }
707
708 DEBUG_ARGS2(DEBUG_INIT,
709 "Taking MDIO Clock bit mask 0x%0x for max clock %i\n",
710 unClks, unMaxMDIOClk);
711
712 /* return greatest divisor */
713 return unClks;
714}
715
716/***********************************************************************
717 * @Function: ns7520_mii_poll_busy
718 * @Return: 0 if timed out otherwise the remaing timeout
719 * @Descr: waits until the MII has completed a command or it times out
720 * code may be interrupted by hard interrupts.
721 * It is not checked what happens on multiple actions when
722 * the first is still being busy and we timeout.
723 ***********************************************************************/
724
725static unsigned int ns7520_mii_poll_busy(void)
726{
727 unsigned int unTimeout = 1000;
728
729 DEBUG_FN(DEBUG_MII_LOW);
730
731 while (((*get_eth_reg_addr(NS7520_ETH_MIND) & NS7520_ETH_MIND_BUSY)
732 == NS7520_ETH_MIND_BUSY) && unTimeout)
733 unTimeout--;
734
735 return unTimeout;
736}
737
738/* ----------------------------------------------------------------------------
739 * Net+ARM ethernet MII functionality.
740 */
741#if defined(CONFIG_MII)
742
743/**
744 * Maximum MII address we support
745 */
746#define MII_ADDRESS_MAX (31)
747
748/**
749 * Maximum MII register address we support
750 */
751#define MII_REGISTER_MAX (31)
752
753/**
754 * Ethernet MII interface return values for public functions.
755 */
756enum mii_status {
757 MII_STATUS_SUCCESS = 0,
758 MII_STATUS_FAILURE = 1,
759};
760
761/**
762 * Read a 16-bit value from an MII register.
763 */
Mike Frysinger5700bb62010-07-27 18:35:08 -0400764extern int ns7520_miiphy_read(const char *devname, unsigned char const addr,
Marian Balakowicz63ff0042005-10-28 22:30:33 +0200765 unsigned char const reg, unsigned short *const value)
Wolfgang Denk3df5bea2005-10-09 01:41:48 +0200766{
767 int ret = MII_STATUS_FAILURE;
768
769 /* Parameter checks */
770 if (addr > MII_ADDRESS_MAX) {
771 ERROR(("invalid addr, 0x%02X", addr));
772 goto miiphy_read_failed_0;
773 }
774
775 if (reg > MII_REGISTER_MAX) {
776 ERROR(("invalid reg, 0x%02X", reg));
777 goto miiphy_read_failed_0;
778 }
779
780 if (value == NULL) {
781 ERROR(("NULL value"));
782 goto miiphy_read_failed_0;
783 }
784
785 DEBUG_FN(DEBUG_MII_LOW);
786
787 /* write MII register to be read */
788 *get_eth_reg_addr(NS7520_ETH_MADR) = (addr << 8) | reg;
789
790 *get_eth_reg_addr(NS7520_ETH_MCMD) = NS7520_ETH_MCMD_READ;
791
792 if (!ns7520_mii_poll_busy())
793 printk(KERN_WARNING NS7520_DRIVER_NAME
794 ": MII still busy in read\n");
795 /* continue to read */
796
797 *get_eth_reg_addr(NS7520_ETH_MCMD) = 0;
798
799 *value = (*get_eth_reg_addr(NS7520_ETH_MRDD));
800 ret = MII_STATUS_SUCCESS;
801 /* Fall through */
802
803 miiphy_read_failed_0:
804 return (ret);
805}
806
807/**
808 * Write a 16-bit value to an MII register.
809 */
Mike Frysinger5700bb62010-07-27 18:35:08 -0400810extern int ns7520_miiphy_write(const char *devname, unsigned char const addr,
Marian Balakowicz63ff0042005-10-28 22:30:33 +0200811 unsigned char const reg, unsigned short const value)
Wolfgang Denk3df5bea2005-10-09 01:41:48 +0200812{
813 int ret = MII_STATUS_FAILURE;
814
815 /* Parameter checks */
816 if (addr > MII_ADDRESS_MAX) {
817 ERROR(("invalid addr, 0x%02X", addr));
818 goto miiphy_write_failed_0;
819 }
820
821 if (reg > MII_REGISTER_MAX) {
822 ERROR(("invalid reg, 0x%02X", reg));
823 goto miiphy_write_failed_0;
824 }
825
826 /* write MII register to be written */
827 *get_eth_reg_addr(NS7520_ETH_MADR) = (addr << 8) | reg;
828
829 *get_eth_reg_addr(NS7520_ETH_MWTD) = value;
830
831 if (!ns7520_mii_poll_busy()) {
832 printf(KERN_WARNING NS7520_DRIVER_NAME
833 ": MII still busy in write\n");
834 }
835
836 ret = MII_STATUS_SUCCESS;
837 /* Fall through */
838
839 miiphy_write_failed_0:
840 return (ret);
841}
842#endif /* defined(CONFIG_MII) */
Marian Balakowicz63ff0042005-10-28 22:30:33 +0200843
844int ns7520_miiphy_initialize(bd_t *bis)
845{
Marian Balakowicz63ff0042005-10-28 22:30:33 +0200846#if defined(CONFIG_MII)
847 miiphy_register("ns7520phy", ns7520_miiphy_read, ns7520_miiphy_write);
848#endif
Marian Balakowicz63ff0042005-10-28 22:30:33 +0200849 return 0;
850}