blob: 5375625e8cd2bdfb07e7a935286bd1d50eb873b4 [file] [log] [blame]
Simon Glass35ea1bf2015-01-05 20:05:24 -07001Samsung Exynos4 GPIO Controller
2
3Required properties:
4- compatible: Compatible property value should be "samsung,exynos4-gpio>".
5
6- reg: Physical base address of the controller and length of memory mapped
7 region.
8
9- #gpio-cells: Should be 4. The syntax of the gpio specifier used by client nodes
10 should be the following with values derived from the SoC user manual.
11 <[phandle of the gpio controller node]
12 [pin number within the gpio controller]
13 [mux function]
14 [flags and pull up/down]
15 [drive strength]>
16
17 Values for gpio specifier:
18 - Pin number: is a value between 0 to 7.
19 - Flags and Pull Up/Down: 0 - Pull Up/Down Disabled.
20 1 - Pull Down Enabled.
21 3 - Pull Up Enabled.
22 Bit 16 (0x00010000) - Input is active low.
23 - Drive Strength: 0 - 1x,
24 1 - 3x,
25 2 - 2x,
26 3 - 4x
27
28- gpio-controller: Specifies that the node is a gpio controller.
29- #address-cells: should be 1.
30- #size-cells: should be 1.
31
32Example:
33
34 gpa0: gpio-controller@11400000 {
35 #address-cells = <1>;
36 #size-cells = <1>;
37 compatible = "samsung,exynos4-gpio";
38 reg = <0x11400000 0x20>;
39 #gpio-cells = <4>;
40 gpio-controller;
41 };