| Tom Warren | 873e3ef | 2015-02-12 15:01:49 -0700 | [diff] [blame] | 1 | /* |
| 2 | * (C) Copyright 2013-2015 |
| 3 | * NVIDIA Corporation <www.nvidia.com> |
| 4 | * |
| 5 | * SPDX-License-Identifier: GPL-2.0+ |
| 6 | */ |
| 7 | |
| 8 | #ifndef _TEGRA210_COMMON_H_ |
| 9 | #define _TEGRA210_COMMON_H_ |
| 10 | |
| 11 | #include "tegra-common.h" |
| 12 | |
| 13 | /* Cortex-A57 uses a cache line size of 64 bytes */ |
| 14 | #define CONFIG_SYS_CACHELINE_SIZE 64 |
| 15 | |
| 16 | /* |
| 17 | * NS16550 Configuration |
| 18 | */ |
| 19 | #define V_NS16550_CLK 408000000 /* 408MHz (pllp_out0) */ |
| 20 | |
| 21 | /* |
| 22 | * Miscellaneous configurable options |
| 23 | */ |
| 24 | #define CONFIG_STACKBASE 0x82800000 /* 40MB */ |
| 25 | |
| 26 | /*----------------------------------------------------------------------- |
| 27 | * Physical Memory Map |
| 28 | */ |
| 29 | #define CONFIG_SYS_TEXT_BASE 0x8010E000 |
| 30 | |
| 31 | /* Generic Interrupt Controller */ |
| 32 | #define CONFIG_GICV2 |
| 33 | |
| 34 | /* |
| 35 | * Memory layout for where various images get loaded by boot scripts: |
| 36 | * |
| 37 | * scriptaddr can be pretty much anywhere that doesn't conflict with something |
| 38 | * else. Put it above BOOTMAPSZ to eliminate conflicts. |
| 39 | * |
| 40 | * pxefile_addr_r can be pretty much anywhere that doesn't conflict with |
| 41 | * something else. Put it above BOOTMAPSZ to eliminate conflicts. |
| 42 | * |
| 43 | * kernel_addr_r must be within the first 128M of RAM in order for the |
| 44 | * kernel's CONFIG_AUTO_ZRELADDR option to work. Since the kernel will |
| 45 | * decompress itself to 0x8000 after the start of RAM, kernel_addr_r |
| 46 | * should not overlap that area, or the kernel will have to copy itself |
| 47 | * somewhere else before decompression. Similarly, the address of any other |
| 48 | * data passed to the kernel shouldn't overlap the start of RAM. Pushing |
| 49 | * this up to 16M allows for a sizable kernel to be decompressed below the |
| 50 | * compressed load address. |
| 51 | * |
| 52 | * fdt_addr_r simply shouldn't overlap anything else. Choosing 32M allows for |
| 53 | * the compressed kernel to be up to 16M too. |
| 54 | * |
| 55 | * ramdisk_addr_r simply shouldn't overlap anything else. Choosing 33M allows |
| 56 | * for the FDT/DTB to be up to 1M, which is hopefully plenty. |
| 57 | */ |
| 58 | #define CONFIG_LOADADDR 0x81000000 |
| 59 | #define MEM_LAYOUT_ENV_SETTINGS \ |
| 60 | "scriptaddr=0x90000000\0" \ |
| 61 | "pxefile_addr_r=0x90100000\0" \ |
| 62 | "kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \ |
| 63 | "fdt_addr_r=0x82000000\0" \ |
| 64 | "ramdisk_addr_r=0x82100000\0" |
| 65 | |
| 66 | /* Defines for SPL */ |
| 67 | #define CONFIG_SPL_TEXT_BASE 0x80108000 |
| 68 | #define CONFIG_SYS_SPL_MALLOC_START 0x80090000 |
| 69 | #define CONFIG_SPL_STACK 0x800ffffc |
| 70 | |
| 71 | /* For USB EHCI controller */ |
| 72 | #define CONFIG_EHCI_IS_TDI |
| 73 | #define CONFIG_USB_EHCI_TXFIFO_THRESH 0x10 |
| 74 | #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 1 |
| 75 | |
| 76 | #endif /* _TEGRA210_COMMON_H_ */ |